Brodit ProClip 854762
Contents
1. 28 January 2015 www brodit com 2015 Brodit AB Product 854762 oa e w a G ig Ti 854762 ProClip Angled mount The ProClip is a mounting bracket for the vehicle s dashboard Onto the ProClip you can install e g a holder for your mobile phone or PDA or a handsfree set etc Safe and convenient always within easy reach The ProClip is car specific and easy to install The installation is quick no special tools or dismantle of the dashboard is required and it will not damage the interior of the vehicle Made in black ABS plastic Comes with detailed instructions EAN 7320288547626 Item no 854762 fits Freightliner Cascadia 08 15 For USA 1 2 INSTALLATION INSTRUCTIONS Please read all of the instructions and look at the pcitures before attaching the ProClip This ProClip consists of two parts Part 1 The small block with curved lip Part 2 The ProClip faceplate 1 Use the enclosed alcohol pad to clean the area where the ProClip is to be installed Loosen do not remove the two right side torx screws on the control panel Press the thin end of the enclosed gap opener into the gap in the center console sidewall to widen the gap Start at the far right side of the gap and slide it leftward into the correct position 2 Peel off the cover of adhesive tape on both parts Insert the curved edge of Part 1 into the gap next to the gap opener Flip rotate Part 1 upward so the curved edge goes into the ga2. p Before adhering it to the dash please make sure the holes will line up with Part 2 3 Pull the panel towards you in order to widen the gap Press the curved edge of Part 2 into the panel gap Flip rotate the right side of the ProClip toward Part 1 Match the holes on the right side of Part 2 with the holes on Part 1 using the lines on top of Part 1 for guidance Use the enclosed screws to attach Part 2 to Part 1 Draw the screws tight but be careful not to over tighten Tighten the 2 torx screws in the control panel 4 The ProClip is in place 2 2
Download Pdf Manuals
Related Search