Home

Miele CVA 6405 Plumbed Built-in Operating and Installation Instructions

1. day m Thoroughly clean all components After heating up the machine will rinse including the brew unit the main the pipes Hot water will flow from the dispenser connector and the drip coffee dispensers bowl in the door Drinks can now be prepared m Turn the machine off Turning off If you leave the door open for an extended period of time unplug or m Tap the On Off button disconnect it from the power supply When a coffee beverage has been Das energy prepared the coffee machine also rinses the coffee lines before turning off 20 Adjusting the coffee dispensers to the cup height The coffee dispensers can be raised or lowered to the height of your cup or glass If the dispensers are closer the beverage will not cool down as quickly and the crema will have a better consistency m Pull the coffee dispenser down to the same level as the rim of the cup or m Push the dispenser up until there is enough room to fit a larger cup or glass underneath 21 Preparing beverages Preparing espresso coffee or lungo large coffee m Place a cup under the main spout m Tap the touch key for the desired beverage G Espresso Coffee in More programs Lungo coffee The chosen coffee beverage will now be dispensed To ensure that any residues from the factory testing process are removed from the brewing system please discard the first two cups of coffee
2. Brew unit Ground coffee chute Grind control lever Coffee bean container 3 Water tank with inlet Drip tray with no spill grid Waste unit 4 Drip catcher cup 42 Main dispenser connector cap Service cover Controls and display elements o p 8 Settings Profile RIT On Off touch control Turn machine on and off Beverage controls Preparation of G Espresso D Coffee CP Cappuccino B Latte macchiato More programs More beverages such as lungo coffee cafe latte hot milk froth milk and hot water See Mainentance menu Display Information on the current action or status Back gt Go back to previous menu level cancel unwanted actions Arrow keys AV Show more options on the display and highlight a selection OK button Confirm display messages and save settings Profile Save and manage profiles Settings Change settings display information or check which settings are currently active Two servings Prepare two servings of a beverage Ad Parameter Check or change coffee preparation settings Optical interface 12 for Miele Technical Service only Accessories Included accessories Coffee scoop for measuring ground coffee Milk container with lid for storing and preparing milk Milk pipework cleaning agent for cleaning the milk system starter kit
3. eee 25 Preparing beverages with milk 2 2 2222 0200 ee 26 Preparing hot water iee ee Bushs ee ee 26 Preparing beverages from a roiie 26 Aller USE N ven th cide TAR O AR ren Vacant past EEE RB Bes Haste eee nee 26 Customizing your Coffee 2 cc cos een 27 Grinder settings ur bee ab SAR Krater NTR Fa a TRG heard 27 Displaying and adjusting the parameters for a beverage nasao snan aaa 28 Ground Amoun 5 105 fo taste Ain ne en ag E a Ray aud sn a E EE E 28 Brewing temperatu E 2 4 24 nen an ie ke Cira amiken nsan ea 28 Pre brewing ground coffee 2 eee ees 29 Setting the serving size uaaa a 30 Setting the serving sizes while preparing beverages o an auauna aaa 30 Selecting the beverage size in the Parameter menu 32 Setting the serving sizes for various profiles 0 0 0 0 00 cee eee 32 Contents Creating a user profile 0 00 0 eee 33 ACCESSING PONIES s s senpri eet paneu ee ea Pease sae e nee tas 33 Creating a user profile teas 33 Selecting a user profile 2 0 eee 34 Changing a user profile name n nuuanu 34 Deleting a user profile eee 34 Reverting to a user profile s sepre gairide cece 35 Sene 0 0 0 where Le eee ee epee beac oe een 36 Accessing the Settings menu e ees 36 Change and save settingS 0000 c cette 36 Overview of possible settings 0 0 00 cette 37 Language ar este anne gak Wa Role Rath od een YS Eee em aan 39 Time OF day ac
4. Changing a user profile name This selection is only possible if a profile has already been created in addition to the standard Miele profile m Tap the arrow keys until Change name is highlighted Tap the OK button Now continue as you would for Creating a user profile To delete a character select To enter a new character first select it then confirm using OK To save the name change select and tap the OK button to save 34 Deleting a user profile This selection is only possible if a profile has already been created in addition to the standard Miele profile m Tap the arrow keys until Delete profile is highlighted Tap the OK button m Use the arrow buttons to select the user profile you wish to delete m Tap the OK button A check mark y will appear next to the name and the profile will be deleted shortly Creating a user profile Reverting to a user profile You can customize the unit so that after each drink prepared it automatically reverts to the standard Miele profile or retains the most recently selected custom profile m Tap the arrow keys until Change profile is highlighted Tap the OK button You can now choose between Manually The unit retains the selected user profile until another profile is selected After dispensing After each drink prepared the unit automatically reverts to the standard Miele profile When turned on
5. IMPORTANT SAFETY INSTRUCTIONS Technical safety gt Installation work and repairs must only be performed by a trained technician in accordance with national and local safety regulations Repairs and other work by unauthorized persons could be dangerous and may void the warranty gt A damaged coffee system can be dangerous Before installing the coffee machine check for externally visible damage Do not operate a damaged unit gt Be certain your appliance is properly installed and grounded by a qualified technician To guarantee the electrical safety of this appliance continuity must exist between the appliance and an effective grounding system It is imperative that this basic safety requirement be met If there is any doubt have the electrical system of the house checked by a qualified electrician The manufacturer cannot be held responsible for damages caused by the lack or inadequacy of an effective grounding system gt To prevent damage to the coffee machine make sure that the connection data on the data plate fuse rating voltage and frequency matches the electrical power supply Check this before connecting the machine If in doubt contact a qualified electrician gt Do not use an extension cord to connect the appliance to electricity Extension cords do not guarantee the required safety of the appliance danger of overheating 6 gt For safety reasons this coffee machine may only be u
6. Set up successful The display shows the message Fill and insert water container m Fill the water container with cold fresh tap water Water hardness Water hardness is an indication of the amount of minerals dissolved in water The higher the mineral content the harder the water And the harder the water the more often the coffee machine will need to be descaled The coffee machine monitors the quantity of water and steam used The number of beverages that can be dispensed before the machine needs to be descaled will depend on the water hardness level set Set the water hardness level on the coffee machine to the water hardness level for the local area to ensure that the machine functions correctly and is not damaged This will ensure that the reminder to descale the machine will appear in the display at the correct time If unsure of your water hardness contact your local water authority You can program four hardness levels on the machine Water hardness Hardness Setting range hardness level 0 8 7 gr gal soft soft 1 0 8 4 dH 8 7 14 6 gr gal medium medium 2 8 4 14 dH 14 6 21 9 gr gal hard hard 3 14 21 dH more than hard very hard 4 21 9 gr gal 21 dH First steps to use Determine water hardness You can also determine the water hardness with the supplied test strips m Dip the test strip in water for about one second Then shake
7. dard position and the milk lines are rinsed Cleaning and care Water tank Change the water every day to prevent a build up of bacteria Make sure that the valve the underside of the water tank and the surface the water tank sits on are clean Otherwise the water tank will not sit correctly m The water tank can be cleaned in the dishwasher or by hand using warm water and liquid dish soap After cleaning dry the water container m Carefully clean and dry the surface the water tank sits on particularly the slots Waste unit After a certain time the coffee machine will display a message indicating that the coffee grounds container needs to be emptied At this point at the latest the container must be cleaned However it is best to clean the waste receptacle daily Coffee grounds can become moldy Typically there will also be some water in the waste unit left over from the brewing and rinsing processes m Wash the waste unit in the dishwasher or by hand with warm water and liquid dish soap then dry m Clean the appliance space under the unit as well 51 Cleaning and care Drip tray Clean the drip tray daily to prevent odors and mold The coffee machine will show a message on the display when the drip tray is full and needs to be emptied At this point at the latest the drip tray must be emptied Danger of burns If the coffee machine has just
8. m rinse the water container carefully with clean water Make sure that no detergent residue is left in the water tank Fill the water tank with clean tap water The cleaning process is complete when the display reads Program finished 48 Milk container with lid Ensure that the neck and lip of the container are kept clean both when filling and when moving the container Otherwise the unit can malfunction m The milk container glass can be cleaned in the dishwasher or by hand using warm water and liquid dish soap After cleaning dry the milk container The lid of the milk container must be cleaned only by hand U u m Rinse the milk pipework in the lid under running water If no water comes out of the pipework U m clean the lid as described in the chapter Clogged milk pipework step 1 Cleaning the milk pipework in the milk container lid Cleaning and care Main dispenser Clean the stainless steel cover of the main dispenser by hand only using warm water and some dishwashing liquid All other components are dishwasher safe m Pull the main dispenser all the way down and pull the cover forward to remove La lnm m Push the snap in clip slightly up seize the grip of the dispensing unit and pull it out towards the front m Release the dispenser by seizing it by
9. when using the machine for the first time 22 Preparing double portions You can request two portions of espresso or coffee at once in one cup or in two separate cups simultaneously To fill two cups at the same time m Place a cup under each coffee dispenser m ap F The symbol is illuminated m Tap the touch key for the desired beverage Two portions of the desired beverage will be dispensed from the coffee dispensers Tip If you do not tap any beverage keys for a while the Double portion P selection will be reset Preparing beverages Cancel preparation You can cancel preparation while Stop is displayed m Tap the OK button The coffee machine will cancel preparation If two portions are selected for preparation a single tap on the OK button will only cancel preparation of the first portion To cancel both portions keep your finger on the OK button a bit longer Preparing multiple cups of coffee one directly after another coffee pot You can use the Coffee pot function to prepare multiple cups of coffee one directly after another max 1 1 in order to fill a coffee thermos for example You can prepare up to 8 cups this way m Place a suitably sized pot or container under the main dispensers m Tap C m Tap the arrow buttons until Coffee pot is highlighted Tap the OK button m Tap the arrow buttons until the desired number
10. Do not use sticky notes transparent adhesive tape masking tape or other types of adhesive on the surface of the trim These damage the surface causing it to lose its dirt repellent protective coating gt The surface of the stainless steel trim is susceptible to scratching Even magnets can cause scratches to appear Preparing your appliance for an extended vacation gt If you elect to turn off the water to your home for an extended period of time please note that this may not be enough to reduce the risk of a leak To be completely safe you must turn off the water supply to each individual appliance This means under the sink for a dishwasher at the laundry bib for your washer etc SAVE THESE INSTRUCTIONS Guide to the coffee system Front view Colla Euy Sans 7 LT T T On Off touch control 2 Control and display elements Door grip Hot water dispenser Drip tray Main dispenser height adjustable with lighting Milk container with lid 10 Guide to the coffee system Interior view 00 rs 3 ade S 8 SS ee 8 Ground coffee chute cover
11. I gt D D BE L c Por m Slide the hoses back onto the angle section and reinsert it Make sure that the bridge on the angled section faces down m Reinsert the air intake hose into the opening Step 3 Cleaning the milk pipework in the main dispenser m Remove and disassemble the dispensing unit as described in Cleaning and care Main dispenser m Rinse all parts carefully under running water Use the cleaning brush to clean all parts carefully Do not use a needle or similar object to avoid piercing the silicone parts m Reassemble the dispensing unit and reinsert it into the main dispenser m Replace the cover Step 4 Milk valve maintenance m Tap m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Condition milk valve is highlighted Tap the OK button The milk valve will go into maintenance position Important Before you confirm Leave maintenance position with OK you must remove the cleaning brush Otherwise the coffee machine will be damaged m Insert the brush into the milk valve Move the brush back and forth m Tap the OK button The milk valve will move into the stan dard position and the milk lines are rinsed 71 After sales service In the event of a fault which
12. The setting is now saved Customizing your coffee Pre brewing ground coffee When the pre brewing function is Turned on the freshly ground coffee is first moistened with a little hot water Then the remaining water is forced through the moistened coffee at high pressure This helps release the flavor of the coffee You can program normal or long pre brew or turn the Pre brewing function off The default factory setting for the Pre brew function is Off m Tap the arrow keys until Pre brewing is highlighted Tap the OK button The check mark J shows which pre brew option is currently selected m Tap the arrow keys until the desired setting is highlighted Tap the OK button The setting is now saved 29 Setting the serving size The flavor of a coffee beverage depends not only on the type of coffee but also on the quantity of water used You can adjust the amount of water used for each portion of espresso coffee or hot water to suit your cup size and the type of coffee used For beverages prepared with milk you can also adjust the milk and milk froth ratio in addition to the espresso or coffee size You can also program the portion sizes of hot milk and froth There is a maximum amount which can be programmed for each type of drink Preparation stops when this is reached The maximum portion size possible for that type of beverage will then be saved The changed beverage size is always st
13. been rinsed wait a while before removing the drip tray Rinse water will run out of the coffee dispensers m Open the appliance door and carefully remove the drip tray from the appliance The grid in the drip tray helos keep the water in place while you move the full drip tray m Wash the drip tray and the grid in the dishwasher or by hand with warm water and liquid dish soap then dry 52 Make sure that the metal discs contacts on the drip tray are cleaned and dried properly The discs will only be able to detect that the drip tray is full if they are clean and dry m Clean the space under the drip tray m Push the drip tray back into the coffee machine Make sure the drip tray has been pushed into its niche as far as it will go Cleaning and care Drip tray cover m Remove the drip tray cover m The drip tray cover can be cleaned in the dishwasher or by hand using warm water and liquid dish soap m Dry the drip tray cover thoroughly m Replace the cover onto the drip tray Make sure that the front of the cover is flush with the drip tray Bean container m Pull the bean container out of the unit and pull the lid toward the back and off m Clean the bean container and its lid by hand using warm water and liquid dish soap Dry both components m Slide the lid back on then slide the bean container ba
14. coffee machine will cancel preparation 26 Preparing beverages from a profile If you have already created a profile you can select it before preparing a beverage See Creating a user profile m Tap Profile m Tap Select profile m Tap the arrow buttons until the desired profile is highlighted Tap the OK button The name of the profile will appear in the display to show that a profile has been selected Now you can prepare your desired beverage After use If you have prepared a beverage with milk Start rinse cycle will appear on the display after a while m Tap the OK button The milk lines will be rinsed Even if you do not confirm with OK the coffee machine will automatically rinse the milk lines after a while Customizing your coffee To ensure that your coffee system is ideally adjusted to the type of coffee you use you can use the Parameters menu to change the ground amount adjust the brewing temperature or select the Pre brewing option You can customize these settings for each beverage You can also adjust the grinder setting to suit the type of coffee you are using Grinder setting When the beans are ground correctly the coffee or espresso will flow evenly into the cup and have a good crema The ideal crema has a hazel coloring There are various ways to tell whether the coffee grinder is set correctly The grind is too coarse if espresso or cof
15. cover of the ground coffee chute Open the lid of the ground coffee chute m Place a level scoop of ground coffee into the chute m Close the ground coffee chute and slide the cover back into the machine Close the door 24 The display shows the message Use ground coffee Preparing coffee beverages from ground coffee If you want to prepare a coffee beverage from ground coffee m Tap the arrow buttons until Yes is highlighted Tap the OK button You can now select which coffee beverage you want prepared from the ground coffee m Place a cup under the main dispensers m Tap the button for the desired beverage The desired coffee beverage will be prepared If you don t wish to prepare a beverage from ground coffee m Tap the arrow buttons until No is highlighted Tap the OK button The ground coffee will be directed into the waste container If no button is pressed within approx 15 seconds the ground coffee is emptied into the waste container Preparing beverages Beverages with milk You can prepare various specialty coffee beverages with milk or Hot milk and Milk froth The following specialty coffee options are available Cappuccino consists of about two thirds milk froth and one third espresso Latte macchiato consists of one third each of hot milk milk froth and espresso Caf latte consists of hot milk and coffee Instructions for the milk container T
16. is important that you fill the water container with enough water Too little water can cause the descaling program to be stopped prematurely m Reinsert the water tank and close the unit door m Follow the instructions on the display When the display shows Rinse water container and fill with fresh tap water up to the descaling symbol S proceed as follows m Rinse the water tank carefully with clean water Make sure that no descaling agent is left in the water tank Fill clean tap water up to the mark S Also empty the waste unit The descaling process is complete when the display reads Program finished m Tap the OK button The descaling program is now complete and beverages can be prepared in the machine again When descaling the machine be sure to wipe off any splashes of descaling agent immediately These could damage the surfaces After descaling the machine carefully clean the water tank and the drip tray to remove all traces of descaling agent How to descale before prompted m Tap CH m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Descale the system is highlighted The descaling program cannot be canceled once it has started The program has to be carried through to the end m Tap the OK button The descaling process will start 59 Frequently asked questions Repairs to electrical appliances should only
17. m Connect the unit to the water supply see Plumbing m Connect the unit to the electrical supply m Insert the coffee machine all the way into the installation recess When inserting the unit into the recess make sure the electrical and water supply connections are not damaged m Check if the coffee machine is centered and straight in the installation recess If not align the unit using the four feet 82 The coffee machine is delivered with four M5 Allen head screws that you can use to align and fasten the unit in the installation recess m Open the door and partially tighten Ss the screws Shae en 2 E m Align the unit by carefully adjusting the lower Allen head screws until the unit is centered in the installation recess m To secure the unit in the cabinet tighten the upper Allen head screws by hand Installation Adjusting the door hinges If the door cannot be opened or closed easily after installation you will have to align the door TX 20 S MOO anni m TO adjust the door flush with the front of the cabinet turn the screw m To adjust the door horizontally and vertically turn the screw 83 84 85 86 Please have the model and serial number of
18. m Tap the OK button to confirm this message When the number of remaining beverages is 0 the coffee system will lock The display will read Descale the appliance You can turn the coffee machine off if you do not want to run the descaling program at this time However no more beverages can be prepared until the descaling program has been completed 58 Descaling following display reminder m To immediately start the descaling process tap the OK button The descaling program cannot be canceled once it has started The program must be completed through to the end The descaling process is started and various messages will appear in the display m Follow the instructions When the display shows Fill water container with lukewarm water and descaling solution up to the S symbol and insert proceed as follows Preparing the descaling solution The descaling tablets supplied have been specially formulated for use with this coffee machine Additional descaling tablets are available from the Mieleusa com website You will need two descaling tablets for the descaling process Only use the Miele descaling tablets Other types of descaling agents can damage the machine and affect the taste Descaling m Fill the water tank to the mark with lukewarm water m Add two descaling tablets to the water Please note the mixing ratio for the descaling tablets It
19. the ground coffee chute except ground coffee or a Miele cleaning tablet for degreasing the brew unit gt Only use plain milk Most additives contain sugar which will clog the milk pipework and damage the coffee system gt If you use dairy milk use only pasteurized milk 8 gt Do not lean on the open coffee machine door or apply any pressure to it Otherwise the coffee machine could be damaged gt The use of accessory attachments not recommended by the appliance manufacturer may result in fire electric shock or injury to persons gt Please note the following with regard to cleaning the coffee machine Before cleaning and maintenance switch off the appliance and disconnect circuit breaker Clean the coffee system and milk container daily see Cleaning and care The steam dispensed by a steam cleaner can reach the electrical components and cause a short circuit Never use a steam cleaner to clean the coffee machine Descale the coffee machine regularly with the appropriate number of Miele descaling tablets for the water hardness level in your area Descale the machine more frequently in areas with very hard water Degrease the brew unit regularly with the supplied Miele cleaning tablets Depending on the natural oil content of the coffee used the brew unit can become blocked quite quickly IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel trim gt
20. the sides of the magnet and pulling it to the front m Turn the top connecting piece and pull it off to the top Also pull the bottom connecting piece off to the top m Pull off the dispensing nozzles Do not remove the Y piece m Thoroughly clean all components 49 Cleaning and care m Clean the surface of the main dispenser with a damp sponge cloth m Now reassemble the dispensing unit in reverse order Make sure that the upper connecting piece audibly clicks into place Push firmly when inserting the dispensing nozzles into the dispensing unit m Reinsert the dispensing unit into the main dispenser m Replace the cover 50 Milk valve maintenance You should put the milk valve in maintenance mode once per week to ensure good quality milk froth m Tap O m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Condition milk valve is highlighted Tap the OK button The milk valve will go into maintenance position Important Before you confirm Leave maintenance position with OK you must remove the cleaning brush Otherwise the coffee machine will be damaged m Insert the brush into the milk valve Move the brush back and forth m Tap the OK button The milk valve will move into the stan
21. to the coffee system must conform with the requirements of the respective country Only connect the machine to the cold water supply The machine can be connected without a non return valve The on site water line must have a water shut off valve to turn the water off if needed If not present have a water valve installed by a licensed plumber The water faucet must be accessible after installation Water pressure on site Minimum 14 5 psi Maximum 145 psi if higher install a pressure reduction valve Suitable 1 4 tubing or copper piping must be supplied for plumbing To ensure the best coffee quality the maximum length of the tubing or copper pipe should not exceed 4 ft 11 1 5 m If too much water remains in the tubing the coffee quality could be affected Make sure that the shut off valve is accessible after the unit has been installed Parts must only be replaced with original Miele spare parts available from Miele 75 Plumbing Installing the stainless steel tubing in the unit m Remove the water connection cover at the lower rear side of the coffee machine m Take the angled side of the stainless steel tube and check whether the sealing ring is in place If necessary insert it m Place the union nut of the stainless steel tube onto the screw thread m Make sure the fittings are tight 76 Connection to the water supply Disconnect the machine from the electrical su
22. use only to prepare espresso Cappuccino and coffee Do not use this appliance other than for its intended use Any other use could be dangerous The manufacturer cannot be held responsible for damage caused by improper use of the appliance Proper use gt This coffee system is for household use and similar indoor environments only This coffee system is not suitable for outdoor use gt Use this coffee system in standard household environments only for the preparation of coffee beverages such as espresso cappuccino latte macchiato etc Any other type of use is not permitted gt Persons which lack physical sensory or mental abilities or experience with the machine should not use it without Supervision or instruction by a responsible person Children in the household N The coffee and hot water dispensers present a danger of burning or scalding Children s skin is more sensitive to high temperatures than that of adults Keep children from touching the hot parts of the coffee machine or exposing parts of their bodies to the dispensers gt Keep the coffee system out of reach of children gt Always supervise children in the vicinity of the coffee machine Do not allow children to play with the unit gt Danger of suffocation Children could become entangled in packaging e g cling film while playing or pull it over their heads and suffocate Keep the packaging away from children
23. white bars are no longer visible and Turned off appears on the display Activating and deactivating the plumbed water connection The machine is designed to be used with a permanent supply of fresh tap water If the plumbed water connection is turned on the water tank is automatically refilled via the fresh water pipe If the plumbed water connection is turned off you will need to fill the water tank by hand Settings Factory default settings The Factory default setting can be used to reset the coffee machine settings to their original default status Please refer to the Possible settings chart for the default factory settings The following settings will not be reset Language Time Number of beverage portions Profiles Showroom program demo mode Do not activate this setting for domestic use The coffee machine can be presented in the showroom or at exhibitions in Demo mode In this mode the machine lights up but no drinks are prepared or actions carried out The coffee machine cannot be turned off with the On Off button when demo mode is activated 43 Cleaning and care Overview The coffee machine must be cleaned regularly to prevent a build up of bacteria Recommended frequency What needs to be cleaned maintained Daily at the end of the day Milk container and lid Water container Waste unit Drip tray and no spill gr
24. 2 cleaning containers large small for cleaning and care Descaling tablets for descaling the water pipes starter kit Cleaning tablets for degreasing the brew unit starter kit Test strips for determining the water hardness Cleaning brush for cleaning the milk pipework Silicone grease for lubricating the main dispenser cap connector Main dispenser cap connector spare part Milk pipework angle section spare part Additional accessories are available Contact Miele or visit the Miele website for more information Optional accessories Miele offers a range of useful accessories as well as cleaning and conditioning products for your coffee machine All purpose micro fiber cloth for removing fingerprints and minor contamination Milk container with lid for storing and preparing milk Compact seal Milk container lid for storage in the fridge Milk pipework cleaning agent for cleaning the milk system Descaling tablets for descaling the water pipes Cleaning tablets for degreasing the brew unit Silicone grease for lubricating the main dispenser cap connector First steps to use Before the first use m The appliance must be correctly installed and connected before the first use See the Installation instructions m Remove any protective coverings Clean the coffee machine thoroughly see Cleaning and care before filling it with water and coffee beans T
25. Every time the unit is turned on it automatically selects the standard Miele profile no matter which user profile was set before it was last turned off m Tap the arrow buttons until the desired option is highlighted Tap the OK button 35 Settings The Settings menu allows you to customize the coffee machine for your personal needs Accessing the Settings menu m Tap Settings Now you can review or change any settings The check mark J next to the individual entry shows you which setting is currently active A tap on will take you to the next menu level A tap on Settings will take you back to Select beverage Tip If you have turned on the time display or selected Night dimming you can chance the settings without turning on the coffee machine Tap Settings to do this 36 Change and save settings m Tap Settings m Use the arrow buttons to select the desired setting Confirm with the OK button m Tap the arrow buttons until the desired option is highlighted m Tap the OK button The setting is now saved Settings Overview of possible settings The factory default setting for each menu item is displayed in bold Menu item Possible settings Language German English additional languages Country Time Display off on Night dimming Time format 12hr 24hr set Date set Timer Timer 1 Activate Turn on at Turn off afte
26. _ 0 Miele Operating and Installation Instructions Coffee System w To prevent accidents and appliance damage read these instructions before installation or use en US CA M Nr 09 741 560 Contents IMPORTANT SAFETY INSTRUCTIONS 00 00 0000 0 5 Preparing your appliance for an extended vacation 0 0 00 eee eee 9 Guide to the coffee system 0 000002 ee 10 Controls and display elemente 0 00000 cece eee 12 ACCOSSONICS is e e K en ne ee a ee ee 13 First steps to Se kee ed 24 dee she See wads Hae ee ema bn ee 14 TUNING OMe cee nen douks ara ty a oka Sp gaan Neko eam ante ehe ey chee 14 Water hardness 2482 Foes eye eabeg ode eee dees Re 15 Operation lt 6 5 bea nn Chk wa Dae ae edna me eee oy een dees 17 Filling the water ank eee 18 Filling the coffee bean container 0 0 0c 19 Turning the coffee machine on and oft aaau aaa 20 Adjusting the coffee dispensers to the cup height 21 Preparing beverages 0 0 0 0 eee 22 Preparing espresso coffee or lungo large coffee eee 22 Preparing double portions u 42404 Bess a FEES Gee owe 22 Gancel preparation zur as ads u arzt be ode dees RS 23 Preparing multiple cups of coffee one directly after another coffee pot 23 Preparing coffee beverages from ground coffee 0 0 eee 23 Beverages With MiK ess e a ren ee bao ea we 25 Instructions for the milk Container
27. acia es were ne pa ape ea pea oe epee 39 DAS eae ee an Gee ctv eee ye te et ape eee He ea E ehe 39 Timer nen a re Wee a aoe ea weed AR ye ea 39 EC6 1MOAE 6 6 cents tartar dood Ea Aba Shae ba AER ES TAER eae 41 GONID erregen R RE EE 41 Info displaying information a R 0 0 E T R 0 9 ER C RR RR een 42 Locking the coffee system System lock A 0 6 eee 42 Water lhardness ascii has at ae da wie dp Dabei ar ee dts ina 42 Display brightness eee 42 VOLUME res are een De rare hee ay 24 42 Activating and deactivating the plumbed water connection 42 Factory default settings es as sepie 20 0000 43 Showroom program demo mode 2 00 00 c eee ee 43 Contents Cleaning and care 44 OVEIVIEW esa Bra nn Wa anne ae Rare an Soe Bee Oe 44 RIASINGITME SYSTEM ar tar as ann deka an oy agen edo aloe og aE ER E s 46 MIIRPIDEWOLKE Sat Grae en ER Se askin eae nae uth Reg era 46 Milk container with lid 2 00 00 22 48 Main dispenser scan anda ae 20 d rin a dae ead in 49 Milk valve maintenance aap A EL eee 50 Watertank sirsie menadas miy inanan ae en ae he tie a eee ete 51 VWVASTE UNIE zu sh en Be Waban ky a a an Roe CL oe eee ap ate teh 51 PVF WAY re en a ee ee ada shen aa Dee 52 PIMA VAC OVE Ia re ee a ae are re Berg ae he ete EREA 53 Pean eater a ea aan ie ren 53 Main dispenser CONMECION ars 00 ma Erra Pade wee Pee a ie aes 53 Interior and unit door ass Suter ea nern 54 Brew Umt e dactecedeadecdacend
28. ale d paste db aN bE ee ee eM eS 54 Removing the brew unit and rinsing it by hand 54 Degreasing the Drew Umit nike eee aka ke nn nee 56 EXC OR enna tts cette hiss ates ace ee ge none tuk Seance ae inna re 57 Descaliig 4 4 3 28242 hei ea ee ola eee he ed de an eed 58 Frequently asked questions a 60 Cleaning clogged milk pipework 0 00 00 c eee 69 After sales Service 23 cca iscaddvew sewed he fee emda dvs eye ewe ee 72 Installation instructions 0 000 ee 73 Caring for the environment 0 00 00 eee 74 Plumbing esei eh heels 4 2 en ad eae E oat 75 Lead free certificate 6 eee 71 Electrical connection 000 0 78 Installation e ose heh nauk and bask pet ee ewe ee aah el Ra bed ie 79 Ventilatigi ss otc Acie ee eh aae ee Fe ee doe eee Bhat dears 81 Installation 44 2448 2 2a eves oie Pah er a 81 Adjusting the door hinges 2 222 E rakei ieee eae 83 Adresses L 0 6 or eins 2a Hana CA Be aan ee Ree Ree 87 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed including the following Read all instructions before installation or use of the coffee system Please read these instructions carefully to prevent accidents and machine damage This appliance complies with current safety requirements Improper use of the appliance can cause personal injury and material damage This appliance is for household
29. an only prepare espresso coffee lungo coffee and hot water You can only prepare beverages with milk again once the milk pipework has been cleaned The cleaning program cannot be canceled once is has started The program has to be carried through to the end To clean the milk pipework m Tap E m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Clean milk pipework is highlighted Tap the OK button The process is started and various messages will appear on the display m Follow the instructions When the display shows Fill water tank with cleaning agent and lukewarm water up to the cleaning mark J and insert proceed as follows Preparing the cleaning solution The milk system detergent was developed specifically for this coffee machine It is available from Miele To avoid damage to the unit use only this detergent m Add one sachet of milk system detergent to the water tank 47 Cleaning and care m Fill the water tank with lukewarm water up to the mark J and stir the solution Please note the mixing ratio It is important that you fill the water container with enough water Otherwise the cleaning process is incomplete m Reinsert the water tank and close the unit door m Follow the instructions on the display When the display reads Rinse out the water container and fill with fresh water
30. be carried out by a suitably qualified person in accordance with local and national safety regulations Repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held responsible for unauthorized work Display messages m To address the fault follow the instructions on the display m If the fault message still appears on the display contact Miele Technical Ser vice Fault Possible cause and solution Fault 1 to 4 An internal fault is present 80 to 83 m Turn off the coffee machine using the On Off button Wait about one hour and then turn the unit back on Fault 74 77 An internal fault is present Fault 225 226 m Turn off the coffee machine using the On Off button Fault 235 236 Wait about 2 minutes and then turn it on again 60 Frequently asked questions Fault Possible cause and solution Fault 73 The brew unit cannot reset to the correct position or it is or clogged and the ground coffee cannot be processed Check the brew unit m Check if you can remove the brew unit see Cleaning and care Brew unit m f you can remove the brew unit clean it see Cleaning and care Brew unit m Push the coffee ejector of the brew unit into the correct position see image m Reinsert the waste unit and the water tank Do not insert the brew unit Close the door and turn on the coffee machine using the On Off button The b
31. brew unit see Brew unit 67 Frequently asked questions Problem Possible cause and remedy The crema on the coffee or espresso is not right The grind level is too coarse or too fine m Set the grinder control to a coarser or finer setting see Adjusting the grinder setting The brewing temperature is too high for the type of coffee being used m Set a lower brewing temperature see Brewing temperature The coffee beans are no longer fresh m Add fresh beans to the coffee bean container 68 Cleaning clogged milk pipework If the quality of the milk froth is unsatisfactory the air intake hose may be clogged Follow the instructions in Step 2 Clean air intake hose and angled section in the door If no milk comes out of the main dispenser only steam please follow the instructions in Step 1 through 4 First check if the milk in the milk container has spoiled This can clog the milk lines To clean the clogged milk lines take a step by step approach Afterwards check if the milk and or milk froth preparation and quality are satisfactory If the milk and or milk froth preparation and quality are still not satisfactory repeat all the steps described without preparing beverages in between Step 1 Cleaning the milk pipework in the milk container lid m Pull the milk intake pipe out of the milk container lid Make sure you also remove
32. chine m Turn off the coffee machine using the On Off button D Wait for approx 1 hour m Turn the machine on again As soon as Preheating phase appears tap the LJ key and select Descale m Descale the coffee machine repeatedly if necessary 64 Frequently asked questions Problem Possible cause and solution The milk lines are being rinsed but no rinse water comes out of the main dispenser The display shows the message Fill and insert water container The milk pipework or the air intake hose is clogged m Follow the instructions in Cleaning clogged milk pipework No milk or milk froth is coming out m Follow the instructions in chapter Cleaning clogged milk of the main dispenser The milk pipework or the air intake hose is clogged pipework The display shows the message Fill and insert milk container although the milk container is full The milk container lid may be contaminated causing the sensors to malfunction m Thoroughly clean the lid and milk container see Cleaning clogged milk pipework and in place Empty drip tray The drip tray is not inserted correctly appears on the m Slide the drip tray all the way into the unit display even though the drip tray is empty The drip tray s sensors are not working properly m Turn off the coffee machine using the On Off button The metal contacts are dirty m Clean and dry the c
33. cification technical amp warranty information The installation steps are described in the enclosed Installation Diagram Leave these instructions with the appliance for the consumer user nformation is subject to change Please refer to our website to obtain the most current product specification technical amp warranty information Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping They have been designed to be biodegradable and recyclable Please recycle Ensure that any plastic wrappings bags etc are disposed of safely and kept out of the reach of children Danger of suffocation 74 Disposal of an old appliance Old appliances may contain materials that can be recycled Please contact your local recycling authority about the possibility of recycling these materials Ensure that the appliance presents no danger to children while being stored for disposal Before discarding an old appliance unplug it from the outlet cut off its power cord and remove any doors to prevent hazards Plumbing The machine must be connected to the water supply in accordance with local and national regulations Disconnect the machine from the electrical supply before connecting it to the water supply Turn off the water supply before connecting the coffee machine to the plumbing All units and systems used to deliver the water
34. ck into the unit Main dispenser connector A connecting piece between the brew unit and the main dispenser is located on the inside of the door nen D m Clean this connector on a regular basis with a damp cloth but take care not to remove the lubricant from the cap m Once a month lubricate the cap with the supplied silicone grease 53 Cleaning and care Interior and unit door Brew unit m Clean the interior and the unit door with warm water and liquid dish soap once all removable parts have been removed Clean the brew unit by hand only using hot water Do not use soap The moving parts of the brew unit are lubricated Detergents will Tip Use a vacuum cleaner to remove damage the brew unit dry ground coffee residue Clean the brew unit once a week B d L J tot Removing the brew unit and rinsing lt it by hand The brew unit can be removed for cleaning To do this m Open the unit door m Remove the water tank the waste unit and the ground coffee chute lid ANJ In the lower part of the inside door there is a drip catcher m Remove this cup and clean it in the dishwasher or by hand using warm water and liquid dish soap Remember to reinsert the drip catcher m Push on the bottom of the brew unit handle and turn the handle to the left m P
35. connection 66 Frequently asked questions Unsatisfactory result Problem Possible cause and remedy The consistency of the milk froth is unsatisfactory The milk temperature is too high Good milk froth is prepared with cold milk lt 55 F 18 C m Check the milk temperature in the milk container The milk pipework or the air intake hose is clogged m Follow the instructions in chapter Cleaning clogged milk pipework The grinding of the coffee beans sounds louder than usual The coffee bean container has run empty during the grinding process m Fill the coffee bean container with fresh beans There might be pebbles mixed in with the coffee beans m Turn the coffee machine off immediately Contact Miele Technical Service Espresso or coffee flows into the cup too quickly The grind level is too coarse m Set the grinder control to a finer setting see Adjusting the grinder setting Espresso or coffee flows into the cup too slowly The grind level is too fine m Set the grinder control to a coarser setting see Adjusting the grinder setting The coffee or espresso is not hot enough The cup has not been pre heated The brewing temperature is set too low m Set a higher brew temperature see Brewing temperature The brew unit filters are blocked m Remove the brew unit and clean it by hand see Brew unit m Degrease the
36. e Tip By tapping or Profile you can return to the main menu Creating a user profile m Tap the arrow keys until Create profile is highlighted Tap the OK button Letters and numbers will now appear in the display that you can select using the arrow keys You can also use the arrow keys to turn between numbers capitalized or lower case characters m Tap the arrow keys to select the desired character Tap the OK button You will see the selected character in the top line of the display m Repeat the process until the desired name appears in the top line of the display Tip Use the key to delete the character entered last Once you have completed your entry and want to Save it m use the arrow keys to select the check mark V and tap the OK button If you do not want to save your entry m tap the key until all characters have been deleted and the coffee machine will revert to the previous selection Tip The most recently created profile is the currently selected profile 33 Creating a user profile Selecting a user profile This selection is only possible if a profile has already been created in addition to the standard Miele profile m Tap the arrow keys until Select a user profile is highlighted Tap the OK button m Use the arrow keys to select the profile that you want to select Tap the OK button The name of the current profile is shown at the top left of the display
37. e coffee and hot water dispensers when beverages or steam are being dispensed Do not touch hot surfaces Use handles or knobs The spouts can spray hot liquid or steam Be sure the main dispenser is fitted correctly and only use it if it is clean J Never look into the lighting directly or with an optical instrument gt Do not use the coffee machine to clean objects gt Before the first use clean the coffee system and milk container thoroughly see Cleaning and care IMPORTANT SAFETY INSTRUCTIONS gt Please note the following regarding water Without a plumbed water supply Only fill the water tank with cold fresh tap water Hot water or other liquids can damage the coffee system Change the water every day to prevent a build up of bacteria When using a plumbed water supply Empty the water tank once a day Do not use mineral water Mineral water will cause a lot of limescale to build up in your coffee system and damage it Do not use water from reverse osmosis units This could damage the appliance gt Fill the bean container with roasted whole coffee beans only Do not fill the bean container with coffee beans which have been treated or with ground coffee gt Sugar will destroy the system Do not use coffee beans which have been treated with caramel sugar etc or fill the coffee system with other liquids that contain sugar gt Do not fill anything into
38. e machine is immediately repaired if any damage is detected The water supply is shut off during extended periods of non use e g vacation gt Before service or maintenance disconnect the power supply by either removing the fuse tripping the circuit breaker or unplugging the unit gt Never open the outer casing of the appliance Tampering with electrical connections or components and mechanical parts is dangerous and may cause machine damage gt Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Contact Miele gt Always attach the cord to the appliance first then plug it into the wall outlet To disconnect turn the machine off then remove the plug from the wall outlet gt Do not let cord hang over edge of table or counter or touch hot surfaces gt To reduce the risk of injury do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally gt To protect against fire electric shock and injury to persons do not immerse cord plugs or coffee machine in water or other liquid Proper use N The coffee and hot water dispensers present a danger of burning or scalding The dispensed liquids and steam are extremely hot The water in the drip tray may be very hot as well Be careful when emptying it Please note Keep away from the areas under th
39. ee machine is connected to a plumbed water supply the water is filled up automatically as soon as the machine is turned on The inlet guide at the water tank lid ensures that the water is flows in quietly Of course you can also fill the water tank manually when using the coffee machine without a plumbed water supply water tank operation N Change the water daily to prevent bacteria growth Before using the coffee system for the first time clean the appliance See Cleaning and Care Only fill the water tank with cold fresh tap water Hot or warm water or other liquids can damage the coffee machine Do not use mineral water to fill the water tank Mineral water will cause serious lime scale deposits to build up in your coffee machine and damage it 18 m Slowly pull the water tank forward and out m Remove the lid and fill the container with fresh cold tap water to the Max mark m Push the water tank into the unit until it clicks into place If the water tank has not clicked into place pull the tank out check and clean the niche The valve might leak If necessary clean the niche and surface Filling the coffee bean container You can make coffee or espresso from roasted whole coffee beans that the coffee machine will grind fresh for each portion Add fresh beans to the coffee bean container Alternatively
40. ely escape The ventilation openings in the surrounding cabinets and the space below the ceiling must be at least 78 3 4 200 cm Otherwise condensation can form causing damage to the coffee machine or the surrounding cabinets Installation Make sure that power is not supplied to the appliance during installation or removal of the unit When built into cabinetry only use the coffee machine in ambient temperatures between 50 F 10 C and 100 F 38 C You will need two Allen wrenches size 3 and 5 for the installation To align the unit door flush with the kitchen cabinetry there must be a sealing strip around the installation recess otherwise a sealing strip must be put in place around the unit m f there is no sealing strip around the installation recess stick the Miele sealing strip onto the unit from the back before putting it into the recess The sealing strip is available from Miele 81 Installation Tip A place to set down the coffee machine at the level of the installation recess is helpful This makes it easier for you to install the unit s electrical and water connections 9 N l R l L U LM m J L 1 ee N my ne m Unscrew the four feet on the underside of the unit by about 1 16 2 mm using the larger Allen wrench The feet can be unscrewed by up to 3 8 10 mm
41. fee flows into the cup too quickly the crema is very pale and uneven Use a finer grinder setting so the coffee beans will be ground more finely The grind is too fine if espresso or coffee flows into the cup very slowly the crema is dark brown Use a coarser grinder setting so the coffee beans will be ground more coarsely To prevent damage to the grinder Adjust the coffee grinder one level at a time Let the beans grind before adjusting another notch m Open the appliance door S amp S Fe ee al 6 pa en gt gt I m Push the grinder slide control to the left by no more than one level for a finer grind or to the right for a coarser grind m Close the appliance door m Prepare a coffee beverage Then you can adjust the grinder by another level The adjusted grinder setting will only take effect after the second coffee portion 27 Customizing your coffee Displaying and adjusting the parameters for a beverage m Tap The symbol is illuminated m Tap the arrow buttons until the desired beverage is highlighted Tap the OK button The current settings for the ground amount brewing temperature and pre brewing for this beverage are displayed Ground amount The coffee machine can grind and brew 6 14 g of coffee per c
42. formation found on the data plate match the household electrical supply before installing the coffee system Do not connect the appliance to a power inverter or directly to power produced outside of the normal electrical grid i e direct solar or wind power source Direct connection to such power sources can Cause power surges and tripped breakers when the appliance is turned on and could damage the appliance Do not connect the appliance to energy saving plugs or outlets The reduction of power to the appliance caused by these devices will cause the appliance to run hot and may damage it and or shorten its usable life If there is any question concerning the electrical connection of this appliance to your power supply please consult a licensed electrician or contact Miele s Technical Service Department See back page for contact information 78 Installation Installation and combination options The unit is designed to be built into cabinetry 79 Installation S 0 T A combination with other built in Miele appliances is possible For combination installations it is very important to install the unit with a protective base between the appliance and the unit exception installation with a built in plate warmer 80 Installation Ventilation When installing the coffee machine make sure that the back of the unit is sufficiently ventilated so that steam and hot air can fre
43. he electrical outlet m Insert the plug into the outlet The coffee If more than 10 minutes have passed since the coffee machine is turned machine was last used the lighting automatically turns off on The light turns off suddenly 63 Frequently asked questions Problem Possible cause and solution The touch keys do not respond The coffee machine can no longer be An internal fault has occurred m Open the unit door The current process is stopped machine does not turn on at the programmed and activated Turn on at time operated m Disconnect the power supply by pulling the coffee machine s power cord from the electrical outlet The coffee The system lock feature has been activated m Deactivate the system lock see Settings System lock No weekdays have been selected m Check the timer settings and adjust if necessary see Settings Timer The coffee system was not used after being turned on three times in a row automatically m Turn the machine on and prepare a beverage The display messages are difficult to read The contrast or brightness of the display is too low m Adjust these settings see Settings Display brightness After the unit has been turned on the message Push the water container in until it engages appears although the tank is full and inserted The unit does not rinse There is limescale build up in the coffee ma
44. he milk is not cooled in the milk container if you do not prepare milk beverages for a while place the milk container in the refrigerator Good milk froth can only be prepared with cold milk under 55 F 13 C Only use plain milk Most sugary additives can clog the milk lines Lid Sensor rod Milk intake tube Glass container m Fill the milk container to a maximum level of 3 4 2 cm below the rim Place the lid on the milk container Ensure that the neck and lip of the container are kept clean both when filling and when moving the container Contamination can cause malfunctions m Slide the milk container into the front of the coffee machine 25 Preparing beverages Preparing beverages with milk m Place a suitable cup or glass under the main dispensers m Tap the touch key for the desired beverage S Cappuccino B Latte macchiato in More programs Caf latte Hot milk Milk froth The desired beverage will be prepared Preparing hot water N Danger of scalding and burns at the hot water dispenser The dispensed water is very hot m Place a suitable cup or glass under the main dispensers m Tap O m Tap the arrow buttons until Hot water is highlighted Tap the OK button Hot water is dispensed into the container under the hot water spout To stop dispensing water m Tap the OK button The
45. id Once weekly more often for heavier staining Main dispensers Main dispenser connection Clean milk valve with cleaning brush Interior Drip catcher on the inside of the unit door Brewing unit Front of unit especially important immediately after descaling Once monthly Lubricate cap on main dispenser connector When display advises Milk pipework with milk line cleaner Brew unit with cleaning tablets Descale unit When necessary Bean container Clean clogged milk line with cleaning brush Some components of the coffee machine are dishwasher safe However cleaning these in the dishwasher frequently can cause them to become discolored due to regular contact with food residues e g tomatoes in the dishwasher or the surface can become damaged The following components should be cleaned only by hand Main dispenser cover Milk container lid Brewing unit Bean container and lid Service cover 44 Cleaning and care Danger of burns Let the unit cool down before you clean it especially the water in the drip tray Do NOT use a steam cleaner to clean this unit Doing so will damage the unit Never use cleaning products that contain sand cleaning soda acids or chlorides They will corrode the surface To avoid mold growth and odors it is important to clean the machine regularly The main dispenser connector cap is lubricated w
46. ilk lines Milk residue can clog the milk pipework If you have prepared a beverage with milk the coffee machine will automatically rinse the milk lines after a few minutes You can also manually rinse the milk lines Tip Place a suitable container under the coffee dispensers m TapE m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Rinse milk pipework is highlighted Tap the OK button The milk lines will be rinsed The water used for the rinsing process will run out of the coffee dispensers Cleaning and care Cleaning the milk pipework using the milk line cleaner Make sure that the milk lines are cleaned regularly and thoroughly Milk contains natural bacteria that will grow when the lines are not sufficiently cleaned Contamination in the unit can be a health risk The milk pipework must be cleaned about once a week The coffee machine will remind you at the correct time Three days before the display will show the message Days until milk ipework cleaning XX The remaining umber of days until the milk pipework eeds to be cleaned will show in the isplay every time the unit is turned on oD 3 0 m Tap the OK button to confirm this message When the number of days left equals 0 the display will show the message Clean milk pipework At this time the function for preparing beverages with milk is blocked m Tap the OK button You c
47. ion size Use the OK button to confirm your individual selections A check mark J placed in front of an ingredient indicates that its quantity will be changed m Tap the arrow keys until Start is highlighted Then tap the OK button The coffee machine will now start preparing your beverage Portion sizes can be set for each selected ingredient when Save appears on the display m Tap the OK button when the cup has been filled to the level you want m Save the portion size required for selected ingredients The portion size and ingredients programmed will now be dispensed every time that particular beverage is selected Setting serving sizes for Caf latte hot milk and milk froth m Place a suitable cup or glass under the main dispensers m Tap m Tap the arrow buttons until the desired beverage is highlighted m Tap the arrow buttons until Beverage size is highlighted Tap the OK button For Caf Latte the quantities for individual ingredients hot milk coffee can be altered as described in Setting serving sizes for cappuccino and latte macchiato For Milk froth and Hot milk proceed as described under Setting the serving sizes for coffee and espresso 31 Setting the serving size Selecting the beverage size in the Parameter menu u Tan O m Tap the arrow buttons until the desired beverage is highlighted Tap the OK button m Tap the arrow buttons until Beverage
48. ith silicone grease Be careful of your clothing when removing or inserting containers or other components from the inside of the unit All surfaces are susceptible to scratching On glass surfaces scratches can lead to breakage All surfaces can become discolored if they are cleaned with unsuitable products Make sure to immediately wipe away any splatters during descaling To better maintain your appliance avoid the following cleaners containing soda ammonia thinners or chlorides cleaners containing descaling agents or lime removers abrasive cleaners stainless steel cleaners caustic oven cleaners scouring pads steel wool hard brushes eraser Sponges metal scrapers Wipe any spills from descaling im mediately 45 Cleaning and care Rinsing the system When a coffee drink has been prepared the coffee machine also rinses itself before turning off This removes any remaining coffee residue You can also manually rinse the system m Tap m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Rinse the system is highlighted Tap the OK button The lines will now be rinsed 46 Milk pipework Make sure that the milk lines are cleaned regularly and thoroughly Milk contains natural bacteria that will grow when the lines are not sufficiently cleaned Contamination in the unit can be a health risk Rinsing the m
49. lly formulated for use in the coffee machine to optimize degreasing They are available from Miele After 200 portions the display will show the message Degrease brew unit This message will be displayed until the brew unit has been degreased Degrease the brew unit regularly to ensure you can prepare aromatic coffee beverages and the coffee machine will function properly m Turn on the unit using the On Off button m Tap m Tap the arrow key A until Maintenance is highlighted Tap the OK button m Tap the arrow keys until Degrease brew unit is highlighted The cleaning program cannot be cancelled once is has started The program has to be carried through to the end m Tap the OK button m Follow the instructions on the display 56 When the display prompts you to Place a cleaning tablet in the ground coffee chute and close the chute m Remove the ground coffee chute cover and open the lid m Drop the cleaning tablet into the chute m Close the lid put the cover back on and close the door m Follow the instructions on the display When the display reads Program finished m tap the OK button The brew unit is now cleaned Cleaning and care Exterior The surfaces can become discolored or otherwise altered if soiling is not cleaned promptly Remove any soiling immediately Make sure no water can penetrate the display All external surfaces are suscep
50. of cups 3 to 8 is highlighted Tap the OK button m Follow the instructions on the display Each cup of coffee will be individually ground brewed and poured Meanwhile the display reports on the process while it is going on You can cancel the process at any time m Tap the OK button or I You can use the Coffee pot function twice After that the coffee machine will need to cool down for an hour to prevent damage to the unit Preparing coffee beverages from ground coffee To make espresso or coffee using ground coffee add a portion of ground coffee to the ground coffee chute This allows you to prepare a decaffeinated coffee even if the bean container is already filled with regular coffee beans for example The coffee machine will automatically recognize that ground coffee has been placed in the chute Only one portion of coffee or espresso can be prepared at a time when using ground coffee 23 Preparing beverages Filling ground coffee Use the scoop supplied with the machine to ensure the correct amount of ground coffee is used Do not add more than one level scoop of ground coffee to the coffee chute If too much ground coffee is filled into the chute the brew unit cannot process It The coffee machine will use all the ground coffee that you have filled into the chute for the next coffee preparation m Open the appliance door m Pull out the
51. off any excess water The result will be visible after about one minute You can now set the water hardness level for the coffee machine Setting the water hardness m Tap Settings m Tap the arrow buttons until Water hardness is highlighted Tap the OK button m Tap the arrow buttons until the desired hardness level is highlighted Tap the OK button The setting is now saved 16 Operation You can operate the coffee machine by tapping the touch buttons with your finger You are in the beverages menu when the display shows Select drink To prepare a coffee beverage tap one of the beverage buttons You can find more beverages in the menu More programs TI Selecting and navigating a menu To select a menu tap the corresponding button You will be able to start actions or alter settings in the selected menu Language Time of day Timer A scroll bar at the right of the display shows that additional options or text is available You can display these by using the arrow keys The check mark V shows which setting is currently selected If you want to select an option tap the arrow keys V and A until the desired option is highlighted To confirm the selection tap the OK button Exit menu or cancel action To exit the current menu tap If a button has not been pressed for a while the coffee machine will revert to the drink menu Filling the water tank If the coff
52. ontacts thoroughly see Cleaning and care Drip tray The door cannot be closed The door cannot be closed The containers are not fully inserted m Check the containers The door hinges are not aligned correctly m Adjust the door hinges see Installation Adjusting the door hinges 65 Frequently asked questions Problem Possible cause and solution The unit suddenly stopped preparing a beverage If the water tank is emptied during beverage preparation the display will show the message Continue preparation yes no after the water tank has been refilled and inserted If you do not confirm this message with yes within 5 minutes the machine will stop preparing the beverage The plumbed water intake is faulty m Check for kinks in the water intake hose and open the water supply all the way The water tank ran empty during beverage preparation but plumbed water supply on is selected and the coffee machine is not connected to a plumbed water supply m Check the plumbed water supply settings see Settings Plumbed water supply Please wait or Preheating appears permanently No beverages can be prepared It is possible that Plumbed water connection on is selected and the coffee machine is not connected to a plumbed water supply m Fill the water tank m Then check the plumbed water supply settings see Settings Plumbed water
53. ored in the current profile The name of the current profile is shown at the top left of the display There are two ways to program the portion amount Using the beverage keys if you prepare a coffee beverage or Selecting Beverage size in the Parameter menu Tip You can cancel the amount programming while Stop is displayed If there is insufficient water in the water tank during preparation the coffee machine will stop the programming The beverage amount will not be saved 30 Setting the serving sizes while preparing beverages Setting the serving sizes for Espresso v Coffee 0 and Lungo coffee I m Place the desired cup under the main dispenser m Tapo D and until the display shows Change The desired beverage is prepared and the display shows Save m Once the cup is filled to your desire tap the OK button The portion size programmed will now be dispensed every time that particular beverage is selected Setting the serving size Setting serving sizes for cappuccino and latte macchiato m Place a suitable cup or glass under the main dispensers m Tap or Buntil the display shows Beverage size The ingredients of the drink are now displayed and their respective quantities can be changed Cappuccino Milk froth Espresso Latte macchiato Hot milk Milk froth Espresso m Use the arrow keys to select all ingredients for which you wish to alter the port
54. played even when the machine is turned off off The time of day is not displayed when the machine is turned off Night dimming The time of day is only displayed during the day Depending on which option you select the coffee machine may consume more energy This is indicated by a message on the display Time format The available options are 24 hour clock 24 hr 12 hour clock 12 hr Setting the time of day Tap the arrow keys to set the hours and minutes Date Tap the arrow keys to set the year month and day Timer Two timer options with the following timer functions are available The coffee machine turns on at a particular time e g in the morning for breakfast Turn on at turns off at a particular time Turn off at turns off automatically after a certain amount of time if no button is tapped or no beverage is prepared Turn off after only available for Timer 1 You can also assign the timer functions to individual days of the week For Turn on at and Turn off at the timer must be activated and at least one weekday must be assigned 39 Settings Select timer The available options are Timer 1 Turn on at Turn off at Turn off after Timer 2 Turn on at Turn off at Turn on at Please note that the coffee machine will not turn on at the required time if you have activated the system lock Tap the a
55. pply before connecting it to the water supply m Remove the water connection cover at the lower rear side of the coffee machine m Check whether the sealing ring is in place If necessary insert it m Screw the supplied brass compression fitting with the end tightly onto the water connector of the coffee machine Tighten the compression fitting by hand do not use a tool The fitting includes an opening for standard 1 4 piping m Connect the compression fitting to the water supply m Slowly open the shut off valve to the water supply and check for leaks If necessary check whether the sealing ring and fittings are tight You can now continue with the installation of the unit see Installation Lead free certificate lead free compliance Miele amp Cie KG Carl Miele Stra e 29 D 3332 G tersloh 77 Electrical connection WARNING Make sure that the power to the THIS APPLIANCE MUST BE machine is OFF before installing or GROUNDED performing maintenance or repairs Important All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations Installation repairs and other work by unqualified persons could be dangerous The coffee system comes equipped with a 6 ft 1 8 m power cord with a NEMA 5 15P molded plug for connection to a 120 V 15 A 60 Hz power supply Verify that the voltage load and circuit rating in
56. r 1 00 Turn off at Day of the week onday Tuesday Wednesday Thursday Friday Saturday Sunday Accept Activate Turn on at yes no Turn off at yes no Timer 2 Activate Turn on at Turn off at Day of the week onday Tuesday Wednesday Thursday Friday Saturday Sunday Accept Activate Turn on at yes no Turn off at yes no Eco mode Eco mode on off Lighting Display brightness Turn off after Info Number of drinks Total portions Espresso Coffee Large coffee Cappuccino Latte macchiato Caf Latte Milk froth Hot milk Hot water No of uses until descaling System lock on off Water hardness soft 1 medium 2 hard 3 very hard 4 Display brightness Set the brightness Volume Buzzer tones Keypad tone 37 Settings Menu item Possible settings Plumbed water connection on off Showroom program Demo mode on off Factory default settings 38 Do not reset Reset Settings Language You can select your language and country for all text displayed on your machine Tip If you have accidentally selected the wrong language follow the flag icon pr to return to the Language option Time of day You can customize the time display the time format and the time of day Display time of day You can choose between the following options on The time of day is always dis
57. ress the brew unit catch downward and carefully pull the brewing unit out 54 Cleaning and care m Carefully pull the brew unit out of the coffee machine If you cannot remove the brew unit or can only do so with difficulty the brew unit is not in the correct position see Frequently asked questions When the brew unit has been pulled out do not alter the position of the brew unit handle This would displace the brew unit and it would not fit back into the coffee machine m Clean the brew unit by hand while running it under hot water Do not use soap m Rub any coffee residue from the filters One filter is located inside the funnel the other to the left of the funnel m Dry the funnel to prevent ground coffee sticking to it during the next coffee preparation m Clean the inside of the coffee machine Use your vacuum cleaner to remove dry coffee grounds To replace the brew unit repeat the previous steps in the reverse order m Push the brew unit back into the coffee machine making sure it is straight m Push the button on the bottom of the brew unit handle and turn the handle to the right m Close the door 55 Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used the brew unit can become blocked quite quickly Use the cleaning tablets supplied to clean the brew unit These cleaning tablets have been specia
58. rew unit motor will automatically move to the correct position m When the message Insert the brew unit is displayed open the door and reinsert all parts into the unit If you cannot remove the brew unit m Turn off the coffee machine using the On Off button D Wait about 2 minutes and then turn it on again 61 Frequently asked questions Fault Possible cause and solution Too much ground coffee There is too much ground coffee in the ground coffee chute If more than one level scoop is put into the ground coffee chute the brew unit cannot process it The ground coffee will be directed into the waste container and a fault will appear in the display m Turn off the coffee machine using the On Off button D m Remove the brew unit and clean it see Cleaning and care Brew unit m Remove the ground coffee from inside the coffee machine for example by using a vacuum cleaner m Use the coffee scoop supplied to measure out the ground coffee Please scoop only one serving of ground coffee into the ground coffee chute Check water intake The plumbed water intake is faulty m Check for kinks in the water intake hose and open the water supply all the way m Remove the water tank and empty it m Push the water tank back into the unit until it clicks into place Push the water container in until it engages The water tank is not sitting properly in the unit m Take the wa
59. rrow keys to set the hours and minutes If the coffee machine has turned itself on automatically three times using the timer function Turn on at but no drinks have been dispensed the machine will not turn itself on again automatically This prevents the coffee machine from turning itself on unnecessarily for example while you are away on holiday The programmed times will however remain in memory and will be reactivated after manually turning the machine on again Turn off at Tap the arrow keys to set the hours and minutes If you are away for a while the stored times will be reactivated after the next time the machine is manually turned on see Turn on at 40 Turn off after The timer function Turn off after is only available with the Timer 1 option If none of the buttons has been pressed or no beverage has been prepared the coffee machine will turn itself off after 30 minutes to save energy You can change this default setting using the arrow keys and select a time between 15 minutes and 9 hours Assign weekdays Days of the week Select the day ofthe week you want The selected weekday is marked as M Once all desired weekdays are checked m Tap the arrow key V until Accept is highlighted Tap the OK button Settings To activate and deactivate the timer If the timer for Turn on at is activated the symbol and the desired turn on time will appear on the display 23 59 hou
60. rs before if the time display has been set to On or Overnight shutdown If the system lock has been activated the timer function Turn on at cannot be selected Select the timer function you want The selected timer function is marked as M m Tap the arrow key V until Accept is highlighted Tap the OK button Eco mode The eco mode is a power saving mode The steam system will only heat up once a coffee beverage or steam for hot milk and milk froth is requested If eco mode is turned off milk froth and hot milk as well as coffee and espresso can be prepared consecutively The steam system remains heated up and uses significantly more energy The coffee machine will indicate the changed energy consumption Lighting The following options are available Adjust the brightness of the lighting while the machine is turned on Adjust the brightness of the lighting while the machine is turned off Specify when the lighting should turn off Turn off after Adjusting the brightness First select Machine turned on Machine turned off Use the arrow keys to adjust the brightness To turn the lighting off m Tap the arrow key V until the white bars are no longer visible and Turned off appears on the display Lighting Setting the turn off time Turn off after You can select for how long the coffee machine should be illuminated after it has been turned off In t
61. sed once it has been safely installed gt If the machine is installed in combination with other appliances a protective base should be installed between the appliance and the unit gt The coffee machine must not be used in mobile installations such as boats gt Only use the coffee machine in ambient temperatures between 50 F 10 C and 100 F 38 C gt Ensure that there is sufficient ventilation around the coffee machine The ventilation openings in the surrounding cabinets and the space below the ceiling must be at least 78 3 4 200 cm Otherwise condensation can form causing damage to the coffee machine or the surrounding cabinets gt Do not place on or near a hot gas or electric burner or in a heated oven gt If the coffee machine is installed in a closed kitchen cabinet use the coffee machine only when the cabinet door is open Do not close the cabinet door when the coffee machine is in operation gt The water supply must be accessible after installation gt Only use Miele original spare parts Only then can the manufacturer guarantee the safety of this machine gt Do not damage or kink the cover of the water intake hose IMPORTANT SAFETY INSTRUCTIONS gt The integrated waterproof system will effectively protect the machine from water damage if the following conditions are met The coffee machine is installed correctly electricity and water supply The coffe
62. size is highlighted Tap the OK button From now on the beverage will be prepared according to the portion sizes set 32 Setting the serving sizes for various profiles You can customize the serving sizes of the individual beverages for each profile m Tap Profile m Select the desired profile The name of the current profile is shown at the top left of the display Now you can either select Beverage size in the Parameter menu or set the serving size while preparing the beverage as described above Creating a user profile If the unit is used by several people with different coffee preferences you can create individual user profiles You can adjust the serving size for each coffee beverage for each profile see Setting the serving sizes The name of the current profile is shown at the top left of the display Accessing profiles m Tap Profile The Profile is illuminated You can now create a profile If you have already created a profile in addition to the standard Miele profile you also have the following options Select a user profile from the pre set profiles already created for the unit Change user profile if you wish to change the name of a profile Delete user profile if you wish to delete a profile Revert to adjust whether the coffee machine automatically reverts to the standard Miele profile or continues to use the most recently selected user profil
63. ter tank out then place it back in the unit If the water tank was not correctly filled and inserted during descaling this fault message will appear m Fill it to the descaling mark S and restart the descaling process If the fault message still appears on the display contact Miele Technical Service 62 Frequently asked questions Unusual performance of the coffee machine Problem Possible cause and solution The light does not The lighting has been turned off illuminate when Turn on the lighting see Settings Lighting the coffee machine is turned on The lighting is defective m Contact Miele Technical Service When the coffee The On Off button D was not tapped long enough system is turned m Tap the depression in the On Off button for at least on using the 3 seconds On Off button the display The plug is not properly plugged into the electrical outlet remains dark m Insert the plug into the outlet The circuit breaker has tripped due to a problem with the coffee machine the electricity supply or another machine m Remove the coffee machine s plug from the electrical outlet m Contact a qualified electrician or Miele Technical Service for assistance The coffee The turn off time programmed into the timer has been machine turns off reached suddenly m f desired set a new turn off time see Settings Timer The plug is not properly plugged into t
64. the gasket m Clean both under running water Insert the supplied cleaning brush into the stainless steel pipe and move it back and forth until all milk residue has been removed m Use the cleaning brush to clean the milk pipework in the lid as well 69 Cleaning clogged milk pipework To reassemble the lid m First insert the gasket in the lid Then insert the milk intake pipe into the gasket Make sure not to slide the beveled end of the milk intake hose into the gasket Step 2 Cleaning the air intake hose and angle section in the door Do not use a needle or similar sharp item These can cause damage to the parts m Pull the main dispenser all the way down m Open the service cover on the back of the door 70 m First detach the air intake hose from the opening Then pull off the angled section m Pull both hoses out of the angled section m Clean the air intake hose using the cleaning brush supplied Blowing through can also shake loose clogged residue m Clean the opening for the air intake hose 3 in the door m Clean the angle section under running water If necessary replace it with the supplied spare part m Insert the brush into the milk hose Move the brush back and forth until all milk residue has been removed Cleaning clogged milk pipework C DE
65. tible to scratching On glass surfaces scratches can lead to breakage All surfaces can become discolored if they are cleaned with unsuitable products Make sure to immediately wipe away any spills during descaling m Turn off the unit using the On Off button m Use only a clean soft sponge with warm water and liquid dish soap to clean the housing Dry all parts with a soft cloth Tip You can also clean the exterior using the Miele micro fiber cloth 57 Descaling Limescale builds up in the coffee machine during use The limescale buildup in the machine will depend on the hardness of your local water supply Limescale must be removed regularly The machine will guide you through the descaling process Various instructions will appear on the display e g you will be prompted to empty the drip tray or fill the water container Descaling is required and takes approximately 20 minutes During the descaling program water containing descaling agent will run out of the main dispenser and the hot water spout This is followed by an activation period before a little more water with descaling agent is dispensed etc The coffee system will remind you on the display when the descaling program needs to be carried out The display will show No of uses until appliance needs descaling 50 The remaining number of beverages that can be made before descaling will show in the display after each beverage is made
66. up The greater the quantity the stronger the coffee or espresso There are various ways to tell whether the amount of coffee is set correctly The ground amount is too small if espresso or coffee flows into the cup too quickly the crema is very pale and uneven the espresso or coffee lacks body Increase the amount of coffee so that more ground coffee is brewed The ground amount is too much if espresso or coffee flows into the cup very slowly the crema is dark brown the espresso or coffee tastes bitter Decrease the amount of coffee so that less ground coffee is brewed 28 m Tap the arrow buttons until Amount of coffee is highlighted Tap the OK button m Tap the arrow keys to change the ground amount Tap the OK button The setting is now saved Brewing temperature The ideal brewing temperature will depend on the type of coffee whether an espresso or a coffee is being prepared and the altitude of the region There are five brewing temperatures Tip Not every coffee can tolerate high temperatures Certain types are too delicate the crema on top would not be as good and the taste would be impaired m Tap the arrow keys until Brewing temperature is highlighted Tap the OK button The check mark V shows which brewing temperature is currently selected m Tap the arrow keys until the desired temperature is highlighted Tap the OK button
67. urned on mode the coffee machine will remain illuminated for another 10 minutes after the last action You cannot change this time Tap the arrow keys to set the hours and minutes 41 Settings Info displaying information In the menu option Info the number of portions prepared for each individual beverage can be displayed You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled Please descale the coffee system Remaining number of servings To return to the previous menu m tap the OK button Locking the coffee system System lock amp You can lock the coffee machine to prevent it being used without your knowledge by children for example Activating and deactivating the system lock amp If the system lock has been activated the timer function Turn on at cannot be selected Temporarilydeactivatelock While the display shows the message To deactivate press OK button for 6 seconds m touch the OK button for 6 seconds As soon as the coffee machine is turned off the system is locked again 42 Water hardness You will find the information on water hardness in the Initial operation chapter Display brightness Use the arrow keys to adjust the display brightness Volume You can adjust the volume of the buzzer and keypad tones with the arrow keys To turn off the sound m Tap the arrow key V until the
68. urning on When you turn the coffee machine on for the first time you will be prompted to set the following after the welcome screen has appeared Language Date Time of day Display time of day m Tap the On Off button The display briefly shows the Miele Welcome message 14 Setting the language m Tap the arrow buttons until the desired language is highlighted Tap the OK button m Tap the arrow buttons until the desired country is highlighted Tap the OK button The setting is now saved Setting the date m Tap the arrow buttons until the current year appears Tap the OK button m Repeat this process for Month and Day until the current date is set The setting is now saved Set Time of day m Tap the arrow buttons until the current time appears Tap the OK button The setting is now saved First steps to use Display You can choose between the following options On The date and time are always displayed even when the machine is turned off Off The display will go dark as soon as the machine is turned off Night dimming The date and time will be displayed between 5 00 and 23 00 m Tap the arrow buttons until the desired display type is highlighted Tap the OK button Depending on which option you select the coffee machine may consume more energy This is indicated by a message on the display The display will then show the message
69. you can make coffee or espresso from ground coffee see Coffee beverages prepared from ground coffee Only fill espresso or coffee beans in the beans container Anything else including ground coffee will damage the grinding unit Caramelized or otherwise pre treated beans or sugar containing beverages must not be filled into the appliance It will damage the coffee system m Pull the bean container out m Slide the lid back then fill the bean container with roasted coffee beans m Slide the cover all the way forward again m Slide the bean container back into the coffee machine m Close the door Turning the coffee machine on and off Turning on Turning off for longer periods When the machine is turned on itheats Of time up and rinses out the pipework This If you will not be using the coffee cleans and heats the pipework to ready machine for a while the machine for coffee preparation m Empty out the drip tray the waste If the coffee machine still has an unit and the water tank operating temperature higher than 140 F 60 C rinsing will not take place m Tap the On Off button Tip If you do not want the water from the rinsing process to flow into the drip tray place a suitable container such as the small cleaning container underneath the coffee dispensers before preparing the first coffee of the
70. you cannot easily fix yourself please contact the Miele Technical Service Department at the contact information on the back of this booklet When contacting the Technical Service Department please quote the model and serial number of your appliance given on the data plate inside the appliance 72 MieleCare USA only MieleCare our Extended Service Contract program gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts Only genuine Miele parts installed by factory trained professionals can guarantee the safety reliability and longevity of your Miele appliance Please note that unless expressly approved in writing by Miele s Service department Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele Our goal is to prevent unauthorized and untrained service personnel from working on your Miele products possibly doing further damage to them you and or your home To learn more about MieleCare Extended Service Contracts please contact your appliance dealer or visit us online at http mieleusa com mielecare set Installation instructions nformation is subject to change Please refer to our website to obtain the most current product spe
71. your appliance available before contacting Technical Service U S A Miele Inc National Headquarters 9 Independence Way Princeton NJ 08540 Phone 800 843 7231 609 419 9898 Fax 609 419 4298 www mieleusa com Technical Service amp Support Nationwide Phone 800 999 1360 Fax 888 586 8056 TechnicalService mieleusa com Miele www miele shop com Miele Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan ON LAK 4V8 www miele ca Customer Care Centre Phone 800 565 6435 905 532 2272 customercare miele ca Germany Manufacturer Miele amp Cie KG Carl Miele StraBe 29 33332 G tersloh 87 CVA 6405 ce en US CA M Nr 09 741 560 02

Miele CVA 6405 Plumbed Built-in Operating and Installation Instructions

Contents

Download Pdf Manuals

Related Search

Related Contents