Home

Metz LCD-TV None User's Manual

1. 17 General Picture Settings 18 Picture Settings for Progr via TV Menu 22 Picture Settings for Progr via Station Table 23 General Sound 24 Sound Settings for Progr via TV Menu 28 Sound Settings for Prog via the Stat Table 31 Automatic 2 32 Childlock Voces co nO Ca Rc 33 35 Timer 36 Setting the Time and Date 37 Recording 38 Special Functions 40 41 Timer Overview 41 Direct Recording 43 Picture 44 Picture 46 Programming the Function Keys 47 Sound Settings Mute Function A8 Data Logic Settings model 2 49 EPG M eise aq ee Ent 50 Activating the EPG 50 Collecting EPG 52 Using the 54 Using the EPG Recording a Programme 57 Setting the Country and Language 58 Setting Stations Setting the reception mode 59 TV Standard for analogue stations 60 Analogue TV 61 Colour standard for analogue stations 62 Automa
2. ES Caution This may cause an existing connection diagram to be modified If so you must reconnect the AV devices accordingly 74 25 1 Removing AV Devices Opening the menu t This menu item is not available in a 2 menu MENU If desired you can change the factory settings for C AV devices a video recorder on the EURO1 socket and a DVD player on the EURO2 socket Removing an AV device from the TV set Press the MENU key to open the TV menu Press the yellow key to open the menu AV devices Use the cursor control key to select the device you wish to remove and press the OK key The cursor is on the line Connect Press the OK key again A message is displayed a wa asking if you really want to s change the connected devi 3 Picture Volume e Press the OK key again to remove the connected devi Siction table ce Press the EXIT key to clo se the TV menu 0 9 8 7 6 5 4 3 2 gt Timer n Configuration 5 Ee 1 EXIT The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 75 Opening the menu 26 Initial Programme Position MENU e gt kkk j Picture Volume 5 JN devices 5 Station table 1 0 9 8 7 6 5 4 3 2
3. In normal TV mode the WOW function can be preselected by pressing the yellow key and then switched on and off with the key SRS a registered trade mark of SRS Labs Inc The SRS WOW technology is used by Metz under a licence from SRS Labs Inc 2 Possible only on sets equipped with this function 93 94 38 Glossary Tone settings The tone can be set to either Normal or Speech In the setting Speech the bass and treble components of the sound signal are set to make speech as easy to understand as possible The setting Normal is recommended for music programmes VCR The VCR function provides an optimal picture qua lity when playing back recordings from tape devi ces such as camcorders or video recorders Volume correction The various stations broadcast their sound at diffe rent volumes The TV set can automatically com pensate for these differences in the volume This function remains active even if the standard sound settings are recalled 39 Technical Data Mains voltage 230 240 VAC 50Hz Antenna input 75 Ohms unbalanced DIN 45325 Channel coverage Standard channels 2 12 21 69 Special channels S1 S20 21 S41 S42 46 Belgium channels OIR Power 5 F consumption Bu x 89 88 2992 99 gg ed E S e 3 nuc Milos 26 ML 2x12W Tulio 25 ML PS E ee ew Milos 32 ML 2x20W Puros 32 ML 129W 2 12 5 Mi
4. Do not display still images logos 4 3 pictures with stripes etc over an exten ded period These still images can result in marks on the screen 3 The Remote Control a oT elo 0 TV R 00 amp 3 O 1 2 ete 9 eee RSS DIGITAL TECHNOLOGIES The remote control sends commands to the TV set by means of an infrared sig nal You must point it towards the TV set when using it Note that the remote con trol may interfere with the operation of other devices which use infrared signals such as infrared headphones Sunlight falling directly on the TV set may interfere with the operation of the remote control since the TV set cannot detect the infrared signals from the remote control under these conditions The TV set must be switched on with the main power switch before it can be con trolled with the remote control The most important keys for normal use ON Switches the TV set on with program me position 1 or the programmed initial programme position selected or switches it OFF to the standby sta te Q Numeric keys direct station selection P P Selects the next previous pro gramme position Volume control Setting can be changed in the menu Back to the previously selected station Displays the station table te control Do not insert rech
5. Opening th 35 1 Connecting a Hifi pouce Amplifier AV Receiver Registering the AV Device with the TV MENS Enter the TV menu by pressing MENU Dp Press the yellow key to open the AV Devices A menu Use the cursor control key A to select Hifi Amplifier in the device selection e Press OK twice use the cursor control key A to select Signal Types and press OK For connection type select the signal type Signal IN SPDIF For connection type select the signal type Signal IN Stereo Confirm the setting by pressing OK FIT Press the EXIT key to close E the TV menu Sound XC Picture Volume To configure sound set c YT As tings of the LCD TV press 205 table M the yellow key and use S uns E the cursor control key W to hs E 15 0 NI X select the menu item Sound E via EM Wa c o o i For connection type use Eae HiFi amplifier Ster the key to select Sound via Hifi The speakers of the LCD TV are muted The sound AC3 or stereo sound is rendered over the spea kers of the Hifi set gt For connection type use the key to select Sound via surround The speakers of the LCD TV are used as the centre box The sound AC3 or stereo sound is rendered over the speakers of the Hifi unit 88 36 Copying between AV Devices Direct recording Opening the menu If you wish to copy a recording from one of the
6. Press the MENU key to ce devices open the TV menu i Station table Press the red key to open the menu Configuration Use the corresponding numeric key to select the eee appropriate reception mode Analogue TV DVB T or DVB C The number of subjects and sections depends i on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 59 22 1 Setting Stations Opening the menu TV Standard 2 for analogue stations MENU Various TV standards for picture and sound are used in different countries If the wrong TV stan dard is selected you will not be able to hear the sound or it will be distorted The TV standard L also uses a different standard for transmission of the picture The TV standard must therefore be set o before you execute a station search The TV set is set in the factory to the TV standard B G Setting the TV standard Press the MENU key to open the TV menu 4 ze j Picture Volume E A devices Press the red key to open the menu Configuration Use the corresponding numeric key in the exam ple to select Analogue TV The menu item Search set PTV standard B G tings is already selected Press the OK key and in the setting window use the key to select the desired TV standard
7. 39 Technical Data Audio Scart Front AV Comp Audio DVI Audio Analog Stereo Audio Center IN Analog mono 39 1 Conversion possibilities DVB S digital conversion set 029 NM 1119 for the reception of digital satellite stations for TV and radio programs The DVBD conversion set is installed in the TV set and you do not need any additional remote control for it DVB T C analogue conversion set 070 NM 1061 for the reception of digital terrestrial digital cable and analogue stations for TV and radio pro grams The DVBD conversion kit is installed in the TV set and you do not need any additional remote control for it Ask your local dealer about any further upgrade kits You can also find further information on our homepage www metz de 97 40 Removing CA Modules The LCD TV has two slots C11 CI2 for CA Chip Sma tcard 3 Front view EEE i 1 S Back top view without lid di S My AUI a a n lads LI Back view without lid with inserted module 98 modules at the top card reader for smartcards or decoder cards To insert the CA module open the lid on the top of the LCD TV and insert the CA module in one of the slots as shown in the pictures Press the CA module down until the unlocking bar is lifted up Close the lid The LCD TV is now ready to decode the respecti
8. EXIT Press the OK key to confirm your selection C Press the EXIT key to close the TV menu Station table Ny Timer P Configuration 0 9 8 7 6 5 3 2 1 The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 2 Possible only on sets equipped with this function 60 22 1 Setting Stations Analogue TV Terrestrial station search Opening the menu The terrestrial station search automatically searches MENU the entire range of available reception frequencies C for stations All stations which are found are placed in the station table which is displayed at the end of the search operation If you are not satisfied with the 5 order in which the stations are displayed you can move them to other positions or delete unwanted o stations see Section 24 Sorting stations Executing a terrestrial station search Press the MENU key to open the TV menu Press the red key to open the menu Configuration Use the corresponding numeric key in the example to select Analogue TV me Use the corresponding hai numeric key in the exam Ec i ple to select Terr station search 5 Picture Volume Press the OK key and in id devices the setting window confirm EX Seine the menu item SP tim
9. as video recorders DVD players DVD recorders etc and which can be connected to TV sets All commonly available AV devices are listed in the menu AV devices Note that you must always connect AV devices exactly as shown in the connection diagram in the TV menu of your TV set SVHS Hi8 and Data Logic video recorders must always be connected to the EURO socket of TV set In the factory the EUROT socket is programmed for a video recorder and the EURO2 socket is pro grammed for a DVD player Registering an AV device on the TV set gee Press the MENU key to open TV menu 4 Picture Volume 5 _ Press the yellow key to ona open the menu AV devices 75 mum 3 Ny Timer 2 i to select the AV device you iE 1717 wish to register and press the OK key Use the cursor control key onnect as follows Press numeric key and use the key to select the appropriate signal types OUT IN for this device and press OK to confirm your selection For details of the sig nal types see page 66 and the operating EXIT instructions for the AV device being connected If desired press numeric enter a diffe U3 Caution Connection of rent name for this AV device and press OK a new device may cau Use the cursor control key to select Connect se an existing connec and press the OK key Then connect the AV tion
10. order and numbered differently instructions for the TV set 106 2 Setting the stations Updating the data With the menu item General settings you can specify whether or not the data are to be saved in the non volatile memory of the TV set when trans mission parameters are changed Calling the menu m zZ c This update function applies to stations which use different transmission parameters at different times of the day such as when they transmit regional programmes Setting the data update function Press the MENU key to open the TV menu Press the red key to open the menu Confi guration Press the appropriate nume A va ric key in this example to E a select DVB S EEK 3 Picture Volume oov The cursor is located on the line LNB supply voltage ce devices Press the appropriate nume 2 station table ric key in this example to select General settings In the setting window use the key to set Update data PP Update data to Press the OK key to confirm the new setting Press the EXIT key to close the TV menu EXIT dD in OP OLD New The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 107 Problem TV set does not react to commands from
11. such as the channel assign ments the order in which the stations are stored etc Setting language and country Press the MENU key to open the TV menu e Press the red key to open the menu Configuration Use the corresponding numeric keys to select Language or Country Press the OK key and then use the cursor control key to select the desired language or country Press the OK key to con firm your selection Press the EXIT key to close the TV menu 22 Setting Stations Setting the reception mode This TV set is capable of operating in three diffe rent reception modes Opening the menu Analogue TV The broadcasting technology which has been used for many years The signals can be received via a rooftop antenna or a cable DVB T The new digital broadcasting technology whose signals can be received via an existing analogue rooftop antenna or an indoor antenna depending on the strength of the available signal For more details please consult your local TV dealer or search for DVB T in the Internet DVB C The new digital broadcasting technology whose signals are received via a cable connection For further details please consult your local cable provider or TV dealer or search for DVB C in o the Internet T Select the reception mode to match the broadcasting tech nology available in your area Setting the reception mode cae
12. Depending on the configuration of the TV set the various Press the OK key to save the new setting menu items may be displayed in a different order and numbered differently Press the EXIT key to close the TV menu 3 See glossary for an explanation 5 Available only for DVB stations 7 Available only for analogue stations 17 Opening the menu 11 General Picture Settings MENU 0 Some of the menu items are not available C in a 2 menu The picture settings brightness contrast colour intensity sharpness and noise reduction can be set generally for all programme positions and saved as standard values which can be recalled at any gt time by pressing the OK key Opening the picture settings menu y This example describes how the brightness is adjusted The other picture settings can be adjusted in a similar manner Press the MENU key The TV menu appears on the screen Press the blue key The menu Picture and sound and the menu item Gene ral picture settings are pre selected Brightness Use the cursor control key Standard value 50 to select the menu item puse as default value Yes s ii Brightness The various menu items can be selected with the aid of the numeric keys 5 AV devices Station table gt Timer E Configuration Oo gt WOO o In the setting window use the key to change the setting Use the cur
13. Press the OK key to con firm your selection Press the EXIT key to close the TV menu ES Caution This may cause an existing con nection diagram to be modified If so you EXIT must reconnect the AV devices accordingly C 2 ES Caution This may cause an existing connection diagram to be modified If so you must reconnect the AV devices accordingly Opening the menu no Signal 73 25 Registering AV Devices Setting signal types YUV Connection of external devices with YUV compo nent output to the COMPONENT IN RCA jacks Opening the menu MENU t The signal type always refers to the input C and output of the AV device AV devices equipped with a YUV jack can be con 2 nected to the LCD TV by means of a YUV cable A see page 86 In the AV Devices menu the con nected AV device must be registered with signal OUT YUV Setting the YUV Signal Type Enter the TV menu by pressing MENU Press the yellow key to open the AV Devices menu Use the cursor control to select the AV device whose signal type you want to change and press OK Press numeric key use the cursor control to select Signal OUT and use the Je Picture Volume 6 d key to set YUV AV devices _ 5 Confirm the setti i RIS table ioe ii pes fn gt ae f 7 Exit the TV Menu by pres Configuration sing EXIT 4 are Signal OUT YUV Signal IN no Signal g g 9 EXIT
14. Pressing the key once again restores the volume to its original level 19 1 Data Logic Settings Opening the menu Data Logic Mode 1 Mode 2 Factory setting is Mode 1 MENU If the recording is stopped by the Data Logic Videorecorder self dependent 5 10sec after the start of the recording switching to Mode 2 could solve this problem ep Q I o Function for F3 Function for F2 wt NEUEN CERTE qr EY Function for F1 Tuc 3 Picture Volume P DVB C CI dialogue via E AV devices 5 aie settings alog i erating H Cs 1 Country Sound settings 2 language HiFioupu b Configuration Operating Init prog position Nu Timer lee value with OK sus P Data Logic mode 2 0 EXIT J 49 20 EPG EPG Electronic Program Guide is an electronic TV guide covering all major channels The guide may be made up of details from NexTView and or DVB SI The NexTView information is broadcast by various channels and also includes information for other broadcasting organizations DVB SI Digital Video Broadcasting Service Infor mation is a service provided by different broad casters Programme details are broadcast digitally by each broadcaster exclusively for those pro grammes it offers NexTView and DVB SI are similar in principle but their content may differ in the detail offered 20 1 Activating the EPG Th
15. Timer E d 4 Use the key to set the Configuration picture format setting to Press the OK key to save the new setting Automatic Press the EXIT key to close the TV menu E Q v devices MENU gt Picture format Auto mode EXIT The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 3 See glossary for an explanation 9 92 38 Glossary AV programme position AV devices have one or more connection sockets depending on the model The designations of the se sockets are marked on the device e g AV1 On the AV device you can select which socket you want to use The selected socket is shown on the display of the AV device e g Al for socket AV 1 Code The settings for the childlock function are protec ted by a four digit code you can enter any des ired code but you should note it for future use If you have forgotten your code please consult your local dealer Forced mono It may happen that your TV set switches to stereo mode although the programme you are watching is not broadcast with stereo sound This is normal ly due to the local reception conditions If you set the selected programme position to forced mono all programmes received at this programme posi tion are reproduced with
16. Use the cursor control key lt to select Code and enter your personal 4 digit code with the numeric keys EXIT Make a note of this code Press the OK key to save the new setting e Press the EXIT key to close the TV menu The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 33 Opening the menu 14 Childlock b Permitted programmes Activate the childlock as described in step Use the corresponding numeric key to select the menu item Permitted xx progs xx TV radio or AV Press the OK key and in the setting win dow enter the programme positions with the numeric keys or use the key fo select the des ired programme positions Press the OK key to save the new settings c TV start TV end m Activate the childlock as des M va cribed in step a In the setting m M window use the cursor control key to select the start and end 9 times and enter the desired 5 AV devices times with the numeric keys Press the OK key to save the i Station table settings 1 idi ul Protecting the childlock a settings with your code Use the cursor control key to select Code and enter your personal code with the numeric keys 02 Make a note of this code since the child lock can be deactiva
17. You can switch the TV set between its various ope rating modes with the keys TV AV and V AVR ep ap aD You can also switch from standby mode to the desired operating mode with these keys TV TV mode AV TV mode with input from AV devices e g video tape recorder DVD player etc R DVB Radio mode 1 Possible only in DVB mode 8 6 Station Selection Station selection and manage ment of programme positions The TV set can store the settings for up to 2000 TV stations and 2000 radio stations in so called programme positions You can select any of these programme posi tions with the numeric keys with the oval rocker key P P or from the station table If you use the numeric keys for station selection the first digit you enter is nor 6 Station Selection mally the thousands digit If less than 1000 programme positions are occupied it automatically becomes the hundreds digit If less than ten programme positions are occupied the first digit you enter automa tically becomes the units digit After pressing any numeric key you have three seconds to press further numeric keys Opening the menu Selecting stations from the station table In normal TV or radio mode you can display the station table by pressing the white key Press the white key repeatedly to display a vir tual keyboard Use the respective key to sort the station list alphanumerically
18. the remote control The message Enter code is displayed when the TV set is switched on The TV set will not switch to a selected programme position A teddy bear is dis played instead You have switched off the TV set with the key but the green LED remains on Possible cause No line of sight between the remote control and the TV set e Sunlight is shining directly on the infrared window of the TV set Batteries of the remote control are exhausted TV set has been switched off with the main power switch Fault in the internal processor The childlock is active and was programmed to disable all stations The childlock is active and was programmed so that only the stations shown in the list beside the teddy bear may be selec ted EPG data are currently being collected from the programmed EPG station Remedy Remove any obstacles between the units Prevent sunlight from shining on the set Replace the batteries Switch on the TV set with the main power switch Switch off the TV set with the main power switch wait a few seconds and then switch it on again Enter the code you used when programming the childlock Enter the code you used when programming the childlock None When all data have been collected the TV set will switch itself off automatically Direct recording of an analogue terrestrial station received via roof antenna or cable
19. tive station broadcasts such informa tion Repeatedly press the green key to Erster Durchgang des dritten Springens view additional information about the 54 tournee auf der Bergisel Schanze in Innsbruck f llowin roam d the Pr4 Stereo 13 45 14 40 prog RTL Skispringen Top 50 respective station broadcasts such infor 04 01 06 11 35 12 14 40 15 00 Skispringen Die Entscheidung mation This information can also be accessed while a programme is running To hide the information press EXIT EXIT C 2 Not possible with an external receiver 56 20 3 Using the EPG Recording a Programme Opening the menu Selecting a programme for recording If you have a video recorder with the dialogue system the EPG permits you fo start a recording by pressing a single key EPG Press the EPG key to open the EPG Use the cursor control key to select the program me you wish to record A v If a video recorder with dialogue system is con nected see also Section 25 Recording Yes Switch on the video recorder fj B Reminder No Insert a cassette _ i Das Erste Press the red key on the remote 13 Date 01 05 control 2 T Start 22 45 ba End 23 40 If a normal video recorder is connec E 6m nn ER VPS no ted ow Mes ot Recording device Videorecorder Change with select OK save the timer Switch on the video
20. with Data Logic does not work The Data Logic video recorder is not connected to the roof antenna or cable outlet with a suitable cable Connect the Data Logic video recorder to the roof antenna or cable outlet with a suitable cable 108 Possible cause The AV device has not been registered in the TV set Problem General problems with an external AV device connected to the TV set Remedy Open the menu AV devices select the devi ce with the cursor set the signal types OUT IN correctly and press the OK key Make sure that you con nect the AV device as shown in the connection diagram The Data Logic video recorder with data transfer has not been registered correctly Data Logic does not work The Scart cable does not have all pins connected through AV device video rec independently breaks off recording Wrong data logic setting see also ch 19 1 Open the menu AV devices and register the Data Logic video recorder as video recor der 1 with Data Logic Use a Scart cable in which all pins are con nected through Set the data logic setting to Mode 2 from Mode 1 A film in 16 9 format is played back from an AV device but is displayed in 4 3 for mat The picture format for this pro gramme position has not been set correctly in the TV menu The AV device has been regis tered in the TV menu with the signal type Composite vide
21. In order to find these pages quickly you can set marks to suit your personal requirements To do this open a page for which you want to set a mark Press the red key for Set to place a mark on this page The number of the mark you have just set is displayed above the window containing the num ber of the Teletext page In the case of multiple pages the mark is always set and displayed for the currently dis played sub page us Up to 10 marks can be set for each programme position Scrolling through marked Teletext pages 9 With the Teletext window open you can step sequentially through the marked pages with the green 9 key An even easier method is by pressing the TEXT key while the TV programme is displayed Each time you press this key the next marked page is displayed After the last marked page the TV picture is displayed again 6 Not possible with an external receiver 13 9 Teletext Displaying all Teletext marks 9 If you have set marks for a programme position you can display an overview of these marks by pressing the F3 key The displayed list shows whe re the marks are set Press F3 again to hide the list You can select the individual marks in the list with the numeric keys Clearing Teletext marks 9 Open the Teletext page whose mark is to be dele ted and press the red key Delete to delete the mark Subtitles in Teletext Your TV set is capable of displaying subtitles W
22. In the table which is then displayed you can use the oval rocker key P P or the numeric keys to select the desired station and then press the OK key to display this station If the station table contains more than 20 stations you can display the next 10 stations by pressing the oval cursor con trol key 4 gt Back to the last station You can use the red key to switch back and forth between the last two sta tions you have selected ARD c 55 Hessen 3 m 22 Select with ore Confirm with ok 1 Possible only in DVB mode 9 Opening the Info INFO ep 7 User Help Information During the design of this TV set we have made every effort to make it as easy a possible for you to use it and we hope that you will enjoy familiari sing yourself with your new TV set With the Information menu the TV set is able to answer the many questions which may come up during installation and setup To display this menu simply press the INFO key for the table of contents The Information menu user help Information Contents Index Station selection Picture settings Sound settings V pla Back Recording facilities Timer recordin Died recording AV Teletext Function keys DVB radio mode Electronic Programm Guide Select the underlined text with the cursor further information Visited pages back x forward table
23. The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 2 Possible only on sets equipped with this function 76 You can define an initial programme position in this TV set This initial programme position is used primarily to select the AV programme position if you use an external receiver Setting the initial programme position EX This menu item is not available in a 2 menu Select a receiver satellite or set top box in the menu AV devices and connect the receiver to the TV set see also Section 25 Registering AV Devices Press the AV key Use the numeric keys to select the position Sat Set top in the AV menu Press the MENU key to open the TV menu e Press the red key to open the menu Configuration e Use the cursor control key to select Operation and then Initial programme posi tion Press the OK key and in the setting window use the key to select Yes Press the OK key to save the new setting Press the EXIT key to close the TV menu t The AV programme position will now be selected automatically when you switch on the TV set with the main power switch 27 Sound via HiFi Amplifier ea Opening the menu HiFi output pening On the rear of the TV set you will find audio MENU sock
24. from standby mode into AV mode Display the Information window In the Information window back to the table of contents 1 Possible only in DVB mode 7 4 Daily Operation Switching on Switch on the TV set with the main switch The TV set is now in standby mode and the red standby indicator lights After about five seconds the TV set swit ches to programme position 1 or to the programmed initial programme position If you press no further keys on the remo te control a window requesting that you do so is displayed after about 10 minu tes If you do not do this the TV set swit ches back to the standby state Use the numeric keys to select any des ired programme position Pressing the key selects programme position 1 or if it is programmed the initial program me position see page 76 Switching off Press the key to switch the TV set to standby mode If you do not intend to use the TV set for a longer period switch it off with the main power switch Adjusting the volume The volume can be adjusted with the key Adjusting the picture and sound settings Call the picture settings with the blue key or the sound settings with the yellow key The setting box with the various functions is then displayed at the bottom left of the screen Use the rocker key P4 P to select the desired function and then use the key to adjust the setting 5 Selecting the Operating Mode
25. further data The number of subjects and sections depends on the selected scope of operation Depending After input of the station data use the cursor control on Foe Hal set eae key to select the menu item Station search and press TUE Xm die enly etree the OK key to confirm your selection equipment The station settings are saved 64 22 3 Setting Stations Automatic DVB C station search The DVB C station search operation searches the Opening the menu entire frequency band for TV and radio stations MENU All stations which are found are placed in separa te TV and radio station tables See Section 28 for details of DVB radio mode If you are not satisfied with the order in which the stations are displayed you can move them to other positions or delete unwanted stations see o Section 24 Sorting stations Executing the automatic search Press the MENU key to FER open the TV menu See Press the red key to open ES the menu Configuration 3 Picture Volume AV devices Press the numeric key to select DVB C The cursor is now on the menu line Search settings Press the OK key and Oriana the setting window use the Symbol rate 13 16900 Precision o key to select All FTA Symbol rate 2 6875btart station search only FTA CICAM see Symbol rate 3 also page 63 Press the OK key and then
26. mono sound Noise reduction This function allows you to improve the picture quality of snowy pictures which result from poor reception conditions Various levels of noise reduction can be selected and the settings can be made separately for each programme position Panorama The panorama function can be used to expand normal TV programmes broadcast in the 4 3 format to fill the full width of a 16 9 screen This is done by expanding the picture width accordingly 38 Glossary Picture position vertical With widescreen films subtitles are sometimes transmitted in the black area at the bottom of the screen You can move the picture upwards on the screen to ensure that these subtitles remain visible Standard values The standard values are the settings such as brightness sound volume colour etc which are the same for all programme positions Spatial sound This function can be used to create an artificial stereo effect for programmes with sound in mono Stereo wide For stereo broadcasts the distance between the speakers can be increased artificially in order to achieve a wider stereo effect SRS WOW 2 WOW is an audio system developed by SRS Labs Inc which provides a unique listening expe rience The sound becomes fuller and the bass is deeper and more voluminous Activation of the WOW function allows you to hear a lot of spatial and environmental audio information which is lost in normal stereo mode
27. of contents In the table of contents or the index you can select the item of interest with the cursor control key Use the cursor right key to scroll for wards through the contents or index Use the cursor left key lt to scroll back wards through the contents or index Use the cursor up key to select the last underlined item Use the cursor down key W to select the menu lines and then press the OK key to display 10 the explanation of the selected item You can select any underlined word in the table of contents the index or the explanation of a selec ted item with the cursor Pressing the OK key then displays the explanation for this word You can also scroll forwards and backwards through previously displayed pages with the aid of the red and green keys 8 Menu Control Opening the menu With the TV menu we provide you with an MENU assistant to help you find your way through the many possible settings of the TV set Don t be afraid to change any settings in the various menus No changes will be saved unless you press the OK key to confirm them If you are not sure whether you want to keep a changed setting you can exit from the menu at any time without saving any changes by pres 7 devices sing the EXIT key ki Station table Within the TV menu you can gt Timer return to the previous main m lod enm menu item at any time by pressing the MENU key If
28. of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 102 1 2 Set up of satellite system Selecting satellites You can set up to four satellites in the menu Con figuration No satellite is set in the factory MENU Calling the menu The LNB frequency is used to switch between the high and low frequency bands The default fre quencies Low band 9 75 GHz and High band 10 60 GHz are set in the factory D O Selecting satellites o e Press the MENU key to open the TV menu Press the red key to open the menu Confi guration Press the appropriate nume ric key in this example to 9 select DVB S Press the appropriate nume eet 9 8 x x B ric key in this example to P select Satellite 2 l AV devices 5 Use the key to select the r desired satellite The most 2 station ao common satellites are dis 2 played one after the other if together with the symbol E Batellite A cn yl Fai io add E pen Low band 9 75 GHz Symbol rate 2 g on satellite may High band 10 60 GHz Symbol rate 3 be necessary to set additio nal symbol rates manually if the selected satelli te uses different symbol rates and you wish to find the related transponders in an automatic station
29. recorder Insert a cassette Press the red key on the remote control to programme the TV timer see also Direct recording OTR On AV programme position of the video recorder programme a timer with the data and time of the programme which will be provided by the TV timer Not possible with an external receiver 57 Opening the menu MENU w nee 32 Picture Volume E devices Station table gt Timer e Oo 00 Selected language English aire E Picture Volume E AV devices 5 Station table Ny Timer Selected country Great Britan The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 58 21 Setting the Country and Language t The menu items Language and Country are not available in a 2 menu Selecting the language in the TV menu You can select any of the available languages for the TV menu All texts in the menu and in the help screen Information are then displayed in the selected language Setting the country After installation of the TV set you must enter the country in which it is installed such as Great Britain in order to assign certain basic settings
30. satellite tuner is installed Setting up the Satellite Antenna System LNB Supply 101 Al 1 Setting up the Satellite Antenna System DiSEqC 102 1 2 Setting up Satellite Antenna System Selecting 103 A 2 Setting Stations Search Settings 104 Setting Stations Automatic Search 105 Setting Stations Manual Search 106 Setting Stations Updating the Data 107 Problems Possible Causes Remedies 108 lile amean an e wale sande nitet bd 4 111 Cometa PE ssc 113 Portal stations 114 1 Installation Take care that no bright artificial light or sunshi ne falls directly on the screen This could cause reflections which have a negative effect on the brilliance of the picture The best viewing distance is three times the screen diagonal i e Approximately 2 m 6 ft for 26 screens Approximately 2 4 m 8 ft for 32 screens Approximately 2 8 m 10 ft for 37 screens The antenna cable and any other components such as a video recorder connected between the antenna socket in the wall and the TV set must comply with the European standard EN 60966 2 4 The antenna cable used for connecting the TV set must have a screening attenuation of at least 75 dB The use of non approved cables will invalidate the operating permission for the TV set For details o
31. search Use the cursor control key to select Low band or High band The settings depend on the components installed in the satellite antenna For the correct settings please consult the data sheet or the label of the LNB s being used Press the OK key to confirm the new settings Press the EXIT key to close the TV menu The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 103 Calling the menu 3 Picture Volume 3 AV devices Station table gt Timer T Configuration EXIT C 2 The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 104 N O faut Stations Free to air only A2 Setting the stations Search settings Before executing a DVB station search you must make the appropriate search settings Depending on the features installed in the TV set and your personal requirements you can make the following settings All search for all stations on the selected satelli te FTA only search only for unencrypted free to air stations on the selected satellite FTA Cl search for all FTA stations and stations which can be rece
32. the green key to T SS ES ad kkk E Picture Volume E AV devices 5 Station table BILE L open the Timer menu Press the numeric key to select Time settings Press the OK key and then in the setting window enter the current time with p the numeric keys E eM You can then start the internal clock precisely by pressing the OK key when the time you have entered is reached Press the numeric key to select Current date P Time 20 00 00 In the setting window enter the date with the numeric keys Press the OK key to save the settings Press the EXIT key to close the TV menu The local time offset is the difference between the local time where the TV set is installed and EXIT Greenwich Mean Time GMT The TV set nor am i mally detects this time offset and also the addi tional changeover to summer time The time needs to be set manually only if it is not detected automatically 37 Opening the menu 16 2 Recording Control EX This menu item is not available in a 2 menu In the menu item Recording control you can set a lead time and an overrun time for timer recordings The TV set is automatically switched to the pro gramme position from which the recording is to be made at a time which is the number of minutes programmed as the lead time before the pro grammed starting time for the recording At the end of the programmed recording tim
33. the programmed time a window with the reminder is displayed on the screen You can close this window by pressing any key on the remote control EXIT c t If you do not want the reminder fo appear every day you must clear the time in the menu by pressing the ll key The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 35 Opening the menu 16 Timer Control t The menu items On time and Off time are not available in a 2 menv MENU In the menu item Timer control you can pro gramme a switch on time a switch off time and a sleep timer switch off after The switch on time is the time at which the TV set is to be switched on automatically The switch off time is the time at which the TV set is to be switched off automatically The sleep timer switch off after switches off the TV set after a programmed delay which can be set in steps of 15 minutes Setting the on time and off time Press the MENU key to open the TV menu 32 Picture Volume te devices Press the green key to 2 IM table open the Timer menu gt O Press the numeric key to BE select Timer control Press the OK key and then in the setting window enter the desired time four digits with the numeric keys Time Press th
34. width and spatial sound t The menu points base width and spatial sound are only shown when the function SRR WOW is turned off Base width In the case of stereo transmissions the base width spatial distance between the loudspeakers can be artificially widened to achieve a larger stereo triangle Spatial sound In the case of mono transmis sions an artificial stereo effect RD EST Md can be produced CM 5 Picture Volume Activate base width spatial 4 Station tabl sound 3 ation table j gt Timer Press the MENU key 2 The TV menu appears on the g Configuration screen Press the blue key The menu Picture and sound and the menu item General picture settings are pre selected Press the numeric key to select General sound settings Select Spatial sound or Base width with key allocated in the example or n the setting window use the key to change the setting Press the OK key to save the changed setting Press the EXIT key to close the TV menu Opening the menu MENU em P Spatial sound EXIT ep The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 2 Possible only on sets equipped wi
35. 07 11 12 HOME ENTERTAINMENT Operating instructions for all LCD TV ML and Puros sets M L Edition 606 47 2030 A1 Foreword Dear customer thank you for selecting a Metz LCD TV set We have equipped this TV set with a menu system which uses file cards and believe that this will provide you with a user interface that is easy to under stand If you have any problems you can press the INFO key to display a help function that will assist you in setting up your TV set However you should read at least sections 1 to 8 of the Ope rating Instructions before putting your new TV set into service This LCD TV is HD ready and supports HDTV broadcasts 8 The HD ready Logo is a Trademark of EICTA Your METZ WERKE Metz Werke GmbH amp Co KG Postfach 1267 D 90506 Zirndorf Germany Fon 49 911 97060 Fax 49 911 9706340 www metz de info metz de Basic functions Extended functions Config Contents Installation ame Er ue aes 4 Safety notes 5 The Remote 6 Daily Operation 8 Selecting the Operating 8 Station 9 User Help 10 Menu 11 Teletext era as eA IR GARS 12 AV 15 AV Playback VCR
36. AV devices connected to your TV set such as a Ay DVD player to another connected AV device such as a video recorder you must do this by means of a direct recording operation In this case the signal arriving at one of the EURO sockets is redi e rected to the other EURO socket from where it can be recorded Example you have a DVD player and a video recorder connected to the EURO sockets of the TV set see Section 25 Programming a direct recording for copying Press the AV key and use the corres ponding numeric key to select the DVD Pley r Videorecor DVD player playback device Press the F2 key pes with Briefly pressing F2 executes the func tion which is programmed for this function key F2 see Section 18 Programming function keys Pressing and holding F2 for about three seconds displays all functions available for this function key Press numeric key to open the 7 7 sa timer menu The timer window dis EY by Reminder plays the AV programme position ips EE DVD player the current date and a 2 Aha time window of two hours 5 Date 01 05 J T E Tos Start 22 45 If two hours is insufficient for the LE se End 23 40 copying operation use the numeric VPS keys to enter later end time _ Wap uu Recording device Videorecorder Change with sselect OK save the timer 89 90 36 Copying between AV
37. Devices Direct recording Use the cursor control key W to select the line Recording device If only one such device exists it is then display ed If further recording devices exist you can select the desired device with the aid of the key Press the OK key to save the settings On the playback device in this example the DVD player start the film which is to be copied On the recording device in this example the video recorder select the AV programme posi tion in most cases On the recording device start a direct recor ding by pressing the appropriate button REC or OTR etc The TV set is now set up so that the signal coming from the playback device is connected directly to the recording device 37 Setting the Picture Format Opening the menu US Some of the following menu items are not available on a 2 menv Setting the picture format Select the AV programme position which deli vers the picture by pressing the AV key and then pressing the numeric key corresponding to the device you want to use Press the MENU key The TV menu appears on the screen Press the blue key to open the menu Picture and sound The menu item General picture settings is preselected Press numeric key to select the menu item Pict settings for Pr Use the corresponding numeric key in the exam ple to select the func 29 table tion Picture format gt
38. all free slots 2 Timer 2 uration Operating In the menu retain is dis DEG NexiView amp DVB SI Pr selection in stationtable played i e when you make NextView prog Kabel 1 retain an adjustment this change ibs secon a is displayed in plain text after it is confirmed by selecting OK in the menu SES 0 Retain is then displayed in E the menu as an indication KKK that the previously confir med setting has been retai devices 5 ned 0 4 Station table 5 L e In countries where NexTView oe 2 data is unavailable the menu Operating setting should read EPG CT eee DVB SI Pr select tation DVB SI as illustrated DVB SI selection n Not possible with an external receiver 51 20 2 Collecting EPG data NexTView data is transmitted by various broadcasting organizations DVB SI data is broadcast by each chan nel corresponding to its own content Information may therefore correspondin gly vary Switch on your TV so that EPG data can be compiled and or updated While data is being compiled the green LED is lit TV sets with one receiver unit If a NexTView slot has been set Switch the TV to standby mode using the mains key on your remote If no NexTView slot has been set and only DVB SI details can be received switch the set to standby us After switching on the TV data compilation will continue stop u
39. alue 32 Sound 1 Sound 2 When receiving a dual language pro gramme you can switch between the two sound channels In TV mode press and hold the yellow key until the sound function Sound mode is selected Nm Vol Sound mode Then use the key to select Sound 1 Spatia or Sound 2 2 Spatial Sound mode Cannel 2 Balance 83 84 33 Cleaning the TV Set t Before cleaning the set always switch it off with the mains switch Incorrect treatment and cleaning of the screen sur face can cause irreparable damage to it You should therefore always observe the following instructions for treatment and cleaning of the set Treatment Always treat the screen surface very carefully Take care not to damage it mechanically by shocks impact scratching or scraping Keep sharp pointed and hard objects away from the surface of the screen Keep the surface of the screen clean For cleaning the case and the screen use only a soft dry cloth For removing stubborn marks you may moisten the cloth slightly Cleaning and care The surface of the screen may be cleaned only with a soft dry cloth such as a microfleece duster If any marks cannot be removed with this dry cloth you may moisten the cloth slightly Take care that no water or other liquid can enter the TV set since this can cause serious damage to the set If any liquid or other foreign object pieces of metal etc enters th
40. argeable batteries in the battery compartment of the remo Use only two dry batteries of the type LRO3 AM4 AAA 1 5V 3 The Remote Control Overview of the functions of the keys Switch to DVB radio mode Switch on from the standby state into radio mode Function keys F1 F2 F3 press briefly to call the functions set in the factory F1 F2 F3 press and hold to display a selection of special functions AV press to select one of the previously configured AV devices Cursor control key in the Information window and the TV menu OK confirmation key Volume control values can be set in the TV menu 9 Exit key exit from the menu without saving any changes you have made Open the TV menu In the menu back to the main menu f Open the electronic programme guide EPG 2 Open the Teletext window 3 Mute Freeze frame Back to the previously selected station In the TV menu open the Configuration menu Display the date and time In the TV menu open the Timer window Display the station table In the TV menu open the station table or the station features window Display the sound functions In the TV menu open the AV devices window Display the picture functions In the TV menu open the picture and sound window Back to the TV picture Switch from radio mode to TV mode Switch on from standby mode into TV mode Display the AV menu Replay record Switch on
41. at an error has occurred but any attempt to correct this would have the wrong result Example If the information is encoded as 000 and is received as 101 the receiver would assume that this should have been 111 and will then decode it incorrectly as 1 To sum up several programmes are transmitted by a single transmitter in the form of digital packets Additional information is trans mitted to permit complete correction of a certain number of transmission errors Simultaneous broadcasting network For DVB T the programmes are not trans mitted on a modulated carrier frequency instead one channel with a width of 8 MHz contains 8 192 individual carrier frequencies Some of the signals reaching the receiver come directly from the transmitter others are signals which have been reflected from obstacles in the vicinity and some are even those transmitted by other trans mitters Normally these signals reinforce each other In extreme cases however if they are out of phase and have the same amplitude the signals can cancel each other out 99 41 Basic differences between analog terrestrial reception and DVB T Addition ENA Gee TAY ENG RE NIS Cancellation CUN DE NI 27294725 12757 In most cases only a few of the 8 192 carrier frequencies will be fully cancelled out and the information which is lost can be reconstructed by the error correction function of the receiver Reception beco mes i
42. ction on the AV device This AV selection remains active until you switch to any other programme position After watching the film from the AV device press the TV key to return to normal TV mode 16 10 1 AV Playback VCR function t The menu item VCR is not available in a M 0 O0 Picture quality when playing back from Opening the menu tape devices MENU The VCR function ensures an optimum picture quality when playing back recordings from tape O devices such as video cassette recorders or cam ww corders Setting the VCR function Select the appropriate AV level by pressing the AV key and using the numeric keys to select the AV device M 5 ad irr kkk which is to supply the pictu Picture Volume ba cen devices Press the MENU key to S Stotion table o 3 open the TV menu LE Timer 1 the menu item General Lud gt VCR settings 1 picture settings are pre selected Use the corresponding numeric key in the example to select the menu item Pict set tings for Pr OK ibl Press the blue key The menu Picture and sound and Use the corresponding numeric key in the OK example to select the menu item VCR EXIT Use the key to select Opt 1 If this setting C does not produce a satisfactory result you can The number of and sections depends try using Opt 2 on the selected scope of operation
43. deleted You can also mark a contiguous block of positions by moving the cursor to the programme position at the end of the block Briefly press the OK key to mark the programme position in the example position 0006 Press and hold the OK key to mark all programme positions in the previously selected block To copy this programme position use the cursor fo select the programme posi AV devices PRO 7 FRANKEN tion before or after which d RIL 2 TELE 5 the selected station is to be RTL inserted If the station s 0 5 Station table SuperRTL you have selected were Se Timer k Configuration Kabel 1 previously in programme positions with lower num bers than the insertion Select station with OK hold down to select a block Select new position with positi on th ey are in serted the cursor move copy ll delete Delete all marks with EXIT 68 before this position if they previously had higher numbers they are inserted after this position To move the selected station s select the pro gramme position to which the station s is are to be moved Use the key to copy or move the sta tion s To delete a station press the Il key Press the EXIT key to close the TV menu 25 Registering AV Devices Opening the menu audio video devices are external devices which deliver video and or audio signals such
44. diagram to be device to the corresponding EURO socket changed If so you must reconnect the AV devices accordingly 69 25 Registering AV Devices Data Logic t This menu item is not avai Data Logic video recorder lable in a 2 menv Opening the menu Data Logic is a system which provides a dialo gue between a TV set and a video recorder This intelligent system offers the features such as Automatic transfer of the settings for terrestrial or cable TV stations not DVB to the video recorder Immediate recording the video recorder records the programme currently displayed on the TV screen Automatic switching to the AV programme posi tion Direct control of the video recorder from the timer menu of the TV set Automatic switching off of the video recorder when the TV set is switched to the standby state In the menu AV devices check X to the left of the field Data Logic for Video recorder 1 and connect the video recorder to the EURO1 socket t Data Logic will function correctly only if the AV 1 socket on the video recorder is con nected to the EURO 1 socket on the TV set Comparable dialogue systems are QLink Pan asonic EasyLink Philips Megalogic Grundig SMARTUNK Sony Registering a Data Logic video recorder on the TV set 32 Picture Volume 6 Press the MENU key lo AV devices 5 open the TV menu i Station table Press the ye
45. dle key 13 Signal type Euro sockets 72 Sleep 36 Sound 1 Sound 2 83 Sound 28 Sound effects 24 Sound settings 8 24 Spatial sound see sound settings 24 5 5 25 Standard picture settings 18 Standard sound settings 24 Station 67 Station search automatic 61 63 65 105 Station search manual 64 66 106 Station selection 9 Sialiomitable ionic esed 15 Stations moving copying and deleting 68 Stations sorting 68 Stereo wide 24 Summer time see time settings 37 Switching elt 8 Switching 8 Switching voltage devices with 15 Switching voltage devices without 16 Thunderstorms 5 Timer 36 Timer setting manually 37 Tone settings see Sound settings 29 TV 11 TV 60 VCR 17 Video recorder connecting 69 Video recorder picture quality 17 Teletext 12 Teletext clearing 14 Teletext font size 13 Teletext overview of marks 14 Teletext scrolling by marks 13 Te
46. e Start station search by fig da pressing the OK key The TV set starts to search for available stations A station table with the new ly found stations is displayed on the left half of the screen If a station table already existed before the search the newly found stations are automatically appended after the last existing station N O 010 000 gt SIS stadion search The number of subjects and sections depends After completion of the search all stations which 2 the selected scope of operation Depending h b found d on the configuration of the TV set the various ave been found are sorted menu items may be displayed in a different You can delete any unwanted stations from the station table by selecting them with cursor 2 le only on sets equipped with this control key and pressing the Il key 61 Opening the menu MENU FIT and Picture Volume Stidwest The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 62 Hessen 3 0 22 1 Setting Stations Colour standard for analogue stations The TV set will normally detect the colour standard PAL SECAM NTSC NTSC44 PAL60 PAL M automatically If this automatic selection does not provide satis factory results which should happen only rare
47. e OK key to save the setting Press the EXIT key to close the TV menu d At the programmed on time the TV set is switched on from the standby state red LED lights You must confirm this automatic action by pressing any key on the remote control If this is not done the TV set will switch back to the standby state after 10 minutes This ensures that the TV set does not stay on if you are not at home EXIT J The number of subjects and sections depends on the selected scope of operation Depending Jf you do not want to have the TV set switch on the configuration of the TV set the various menu items be displayed different itself on each day you must clear the on and order and numbered differently off times in the menu by pressing the ll key 36 16 1 Setting the Time and Date Opening the menu Normally the TV set will determine the current date and time from the Teletext signals of the currently selected station providing this station sends Teletext Note For this the device must be turned on with the mains switch m Z If this is not case or if an incorrect date or time is displayed you can set the date and time manually In almost all cases you will not need to do this Even the changeover between winter time and summer time is executed automatically 9 Setting the time and date manually Press the MENU key to open the TV menu Press
48. e the TV set remains set to this programme position for the period programmed as the overrun time For VPS recordings the TV set is automatically switched to the programme position from which the recording is to be 5 Picture Volume made at a time which is the number of minutes programm hati ed as the VPS lead fine before i Siation table the programmed starting time gt Timer for the recording By default z Configuration the TV set switches to this pro gramme position about one hour before the programmed gt Lead time 5 min start time for a VPS recording Setting the lead time VPS lead time and overrun time Press the MENU key to open the TV menu Press the green key to open the Timer menu Use the corresponding numeric key in the MENU 2 e e example to select the menu item Recor ding control Use the cursor control key to select the desired menu item Press the OK key and then in the setting win dow use the key to set the desired lead or overrun time The number of subjects and sections depends the selected scope of operation Depending Press OK key to save the settings on the configuration of the TV set the various menu items may be displayed in a different e Press the EXIT key to close the TV menu order and numbered differently 38 16 2 Recording Control Application example You wish to record a programme received v
49. e TV menu appears on the screen Press the blue key The menu Picture and sound and the menu item Gene ral picture settings are pre selected gt UDN OW Use the cursor control key to select the menu item Brightness The various menu items can be selected with the aid of the numeric keys Use the key to change the settings for Pictu re improvment Press the OK key to save the new settings The picture shows the factory settings Press the EXIT key to close the TV menu 11 General Picture Settings t Some of the menu items are not available in a 2 menu The picture settings zoom vertical position auto matic zoom and panorama can be set and saved as general settings for all programme positions Setting the zoom panorama mode Press the MENU key The TV menu appears on the screen Press the blue key The menu Picture and sound and E the menu item General picture settings are 32 selected ee devices 4 Use the cursor control key 205 we d to select the menu item gt Timer 2 Brightness i e Configuration Picture settings gen Press the corresponding Zoom value Panorama Yes numeric key to select Picture pos vert ox Pan mode Non linear Zoom Panorama Automaticzoom o Zoom Panorama Press the OK key to save the new settings The picture shows the factory settings Pr
50. e function is activated by pressing the button marked EPG NexTView details Before NexTView details can be received a new programme slot must be created in the menv If the menu does not contain a slot for NexTView the following text applies A message will appear for all slots programmed to receive NexTView 8 NexTView is transmitted by the following broadcasting organizations D and A Kabel CH SFI TSR1 TSI TV5 Canal M6 TV5 Status as of 18 Aug 2006 gt Accept this programme as an EPG programme Yes Any other key close the window In this way the TV asks whether this slot should be used to compile the information for the EPG pro gramme guide Not possible with an external receiver 50 20 1 Activating the EPG Opening the menu Pressing the green key for yes activates the slot in order to receive NexTView The message will MENU not appear again C 2 If you know the NexTView slot you can also enter it using the numeric keys in the TV menu You can overwrite existing programme slot num bers or delete them with the Il key DVB SI details To receive DVB SI data no slot the TV menu is needed FIT Factory EPG settings A va EPG NexTView amp DVB SI ZI XEM kkk 7 juod 5 Picture Volume 6 HL AV devi 5 e DVB SI selection TV pi E d Station t Prog selection in the chan pu dE nel table
51. e set immediately disconnect the mains plug from the wall outlet Never insert your hands or tools into the set since this may result in electric shocks 34 Connections on the Left Milos left side 1 Headphone socket diameter 3 5 mm 2 FBAS Video in e g digital camera or camcorder 3 Audio in R L e g camcorder 4 S VHS or Y C in e g camcorder Service socket for use by your dealer Antenna socket vesesseees OO 7199 35 Connections on the Rear of the Set covered by a flap Viewed from below Video IN Audio IN E r eee DVI I connector DVI I connector 7 Signal type DVI D Video IN DVI I connector Signal type DVI YUV HDMI connector Signal type HDMI Video IN EURO sockets for connection of external AV devices Video and audio IN OUT t With the aid of an optical audio cable Toslink cable available from your dealer the digital audio signal AC3 provided by the TV set can be extracted for external processing 86 35 1 Connecting Hifi Amplifier AV Receiver Metz LCD TV OD t FM COAXIAL R FRONT SURROUND uc MULTI CH IN HiFi amplifier AV Receiver 87
52. e stations n 63 22 2 Setting Stations Manual DVB T station search For a manual station search you must know the MENU channel number or the frequency of the station you wish to find Opening the menu Executing the manual search Press the MENU key to open the TV menu Press the red key to open the menu Confi Use the corresponding numeric key in the example to select DVB T n the setting window Antenna you can switch the supply voltage for an antenna on or off with 5 jin 4 the key FIT Use the corresponding 9 0 numeric key in o ple to select search 8 settings 7 34 Picture Volume 6 In the setting window use Y YI the key to select All TT i FTA only or gt see also page 63 gt Timer 2 a Press the OK key and use the corresponding numeric Channel 05 Frequency 177 500 Nig Key in the example 0 to Mod Parameter auto pp tart station search select Manual search z In the setting window use _ the numeric keys to enter the channel number or the frequency 8k Mode _ Mod Parameter manuell Guard Intervall 1 8 RIPE If you know further data of the desired sta tion select the menu item Mod parameter and use the key to change the setting there to Manual You can then enter
53. e various menu items may be displayed in a different order and numbered differently 7 Available only for analogue stations 30 12 2 Sound Settings for Prog via the Station Table E gt Some of the menu items are not available MENU in a 2 menu Opening the menu Making sound corrections Select the programme position whose sound set tings you wish to change C 2 F2 Press the MENU key gt The TV menu appears on the screen Press the white key The station table is dis played with the currently active programme position highlighted Press the F2 key to enable editing of the station table e Use the cursor control key gt to move to the subjects side R Doo VI Use the corresponding 2 Si numeric keys in this exam ple for sound correc fig TN tions to select the desired Configuration mee folume correction 0 Tone settings gen In the setting window use Forced off the cursor control key to select the desired functions The use of the key to change the selected set ting gen means here that the new setting will overwrite the general sound settings see pages 24 and 26 t The individual settings made here which EXIT differ from the standard values remain C saved The TUN subjects aN sections on the selected scope of operation Depending Press the OK key to save the new settings o
54. er ty to select the desired m menu items icture sharpness gen Noise reduction gen In the setting window use Colour offset 0 the cursor control key to _ select the desired function e Use the key to change the setting gen means here that the new setting will overwrite the related general picture setting f see pages 18 tS The individual settings made here which Bayern 3 0 9 3 7 6 4 3 2 1 differ from the general settings remain EXIT saved C Press the OK key to save the new settings The number of subjects and sections depends on the selected scope of operation Depending Press the EXIT key to close the TV menu on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 3 See glossary for an explanation 5 only for DVB stations 7 Available only for analogue stations 23 Opening the menu MENU ep 5 Picture Volume ce devices 5 Station table gt Timer 2 E configuration Volume Standard value 50 Eg 7 se as default value Yes The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 2 Possible only on sets equipped with this function 3 See glossary for an explanation 4 Ava
55. erently 7 Available only for analogue stations 28 12 1 Sound Settings for Programmes via TV Menu t Some of the menu items are not available in a 2 menu Tone setting The tone setting can be set to Normal or Speech The setting Speech should be used primarily for stations which broadcast mainly pro grammes with a lot of speech such as news sta tions The setting Normal is better for music pro grammes Adjusting the tone setting E 0 The TV menu appears 9 the screen devices Press the blue key The menu mum 3 SO Timer 2 s Picture and sound and the Tem menu item General picture settings are pre selected Use the corresponding numeric key in the exam ple to select Sound settings for Pr Use the corresponding numeric key in the example to select Tone settings In the setting window use the key to change the setting Press the OK key to save the new settings Press the EXIT key to close the TV menu 08 Individual sound settings can also be made in the station table Opening the menu MENU o 3 5 Station table Sound set progpposn settings Speech EXIT C 2 The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items moy be d
56. ess the EXIT key to close the TV menu t The functions Panorama and Zoom can be combined with each other Use the cursor control key to select the desired menu items Use the key to change the settings for Opening the menu MENU dD EXIT C 2 The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 3 See glossary for an explanation 21 Opening the menu MENU v 32 AV devices Station table gt Timer Configuration 11 1 Picture Settings for Programmes via TV Menu t Picture settings for individual programme positions are not available in a 2 menu If the standard values do not provide a satisfacto ry picture in some programme positions you can make different settings for these positions which override almost all of the general picture settings These individual settings apply only to the pro gramme position for which they are made and they cannot be overwritten with the standard values In addition to the general picture settings the individual settings also include the settings colour offset colour standard and VCR Individual picture settings for programme position xy Select the programme posi tion whose picture settings you wish to change un g
57. ets and a digital audio out socket see page 86 which can be used to connect the TV set to a HiFi system HiFi amplifier Settings need to be made in the menu items HiFi output and Sound settings only if the TV set is connected to a HiFi system If you want adjust the sound settings exclusively on the HiFi system you must set the HiFi output to constant ovv You can then no longer adjust the volume and tone with the Metz remote control The mute function remains active E kkk If you want to be able to chan Picture Volume E AV devices ge the sound settings with the Metz remote control you must set the HiFi output to variable Setting the HiFi output Press the MENU key to open the TV menu 5 Station table Ny Timer P configuration gt OO SO IFi output constant Output level 50 mm e Press the red key to open the menu Configuration e Use the cursor control key to select Initial programme position Use the corresponding numeric key in the example to select HiFi output n the setting window use the key to set the desired parameters EXIT Press the OK key to save the new settings Press EXIT key to close TV menu The number of subjects and sections depends In normal TV Mode the function Sound via on the selected scope of operation Depending can be activated temporarily by p
58. f how to connect peripheral devices such as video recorders DVD players etc press the INFO key to call the help function select Connecting AV devices with the cursor and press OK to display the information Only use Metz bases as a stand for the LCD TV Use the Metz wall bracket item no 604 99 0286 A1 or a suitable OmniMount wall bra cket to hang the LCD TV on the wall For an OmniMount wall bracket you also need the Metz adapter plate 013ZM1091 2 Safety notes Always place the monitor on a solid stable surface If a cold TV set is moved to a warm room always allow any condensation on the screen to evaporate before swit ching it on The TV set is intended for use in a dry room If in exceptional circumstances you use it outdoors take care that is protected against moisture rain splas hed water dew TV sets need adequate ventilation Never cover the openings on the rear of the set with curtains doilies new spapers etc Also take care that the slits in the bottom of the case are freely accessible so that the intake of the cooling air is not hindered If you place the TV set in a wall unit leave sufficient space on all sides for the circulation of cooling air Do not place the TV set close to a radi ator since this would effect adequate cooling Do not place burning candles or vessels containing liquids vases etc on top of the TV set since any hot wax or water drippin
59. fer Programme position The number of subjects and sections depends Press the OK key to transfer the programme on selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently positions from the TV set to the video recorder 71 25 Registering AV Devices Setting signal types RGB t The signal type always refers to the input and output of the AV device Opening the menu Some AV devices may use a composite video sig nal FBAS for recording and playback operations and an RGB signal for displaying their menus It is not possible to make a general statement in this respect The operating instructions of the AV device concerned may provide some indication If you connect such an AV device with the signal type composite video FBAS and recordings are played back correctly but you cannot see the menu of the AV device you must change the sig nal type in the menu AV devices to RGB Setting the signal type Press the MENU key to open the TV menu Press the yellow key to open the menu AV devi ces nee 9 Use the cursor control key to select the AV device whose signal type you wish to change and press the OK key Press numeric key use the cursor control key to select Signal OUT and Signal OUT RGB Signal IN use the key to change the setting to RGB Press t
60. from adjusting the volume each time with the remote control you can activate automatic volume correction With this function active there is little difference in the volume levels for the normal programme and the commercials The setting made here applies to all programme positions Opening the volume correc tion menu Press the MENU key The TV menu appears on the screen Press the blue key The menu Picture and sound and the dent Volume control 3 menu item General picture The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 2 Possible only on sets equipped with this function 3 See glossary for an explanation A Available only if SRS WOW is switched off 26 settings are pre selected Use the corresponding numeric key in the example to select General sound settings Use the corresponding numeric key in the example to select Volume correction In the setting window use the key to change the setting Press the OK key to save the new setting Press the EXIT key to close the TV menu U3 The function Volume correction in the menu General sound settings does not overwrite the function Volume correction in the menu Sound settings for Pr 12 General Sound Settings Base
61. g into the set could cause serious damage to the electronic components and could also jeopardize the electrical safety of the set Lightning can damage electrical equip ment A lightning flash entering the power cable or the aerial cable can damage the TV set even if it is swit ched off You should therefore discon nect the power cable and aerial cable from their outlets or from the TV set in the case of a thunderstorm The monitor may be opened and repaired only by a qualified person CAUTION HIGH VOLTAGES CAN KILL If repairs should be necessary consult your local dealer Always switch off the TV set before cle aning it Do not hold the remote control directly in front of your eyes and press a but ton The remote control emits infrared radiation Do not place rechargeable batteries in the battery compartment of the remote control Use only two 1 5 V dry batte ries of the type LRO3 AM4 AAA Micro The TV set is intended only for the reception and reproduction of picture and sound signals The TV set may be operated only from a mains voltage of 230 240V VAC 50 Hz Australia 240 VAC For maintenance and repair work the power plug or the power cord input of the TV represents a means to disconnect the device from the mains and must therefore be kept in a usable state in line with appli cable standards Lay the power cable so that nothing stands on it and no one can trip over it
62. guration of the TV set the various antenna the LNB supply voltage must menu items ma be displ layed i different always he set to order and numbered differently 101 A1 1 Set up of satellite system DiSEqC system DiSEqC makes it possible to control the satel lite antenna digitally via the existing antenna cable and is a prerequisite for the reception of signals from more than two satellites e g Astra Eutelsat Hotbird Calling the menu p MENU If you wish to receive signals from ot least three em satellites e g ASTRA 19 2 Eutelsat 16 Hot bird 13 the antenna system can be controlled L_ only with the aid of DiSEqC This menu item is not available in a 2 o o menu 3 Picture Volume 3 AV devices Station table Switching DiSEqC on and off Press the MENU key to open the TV menu Press the red key to open the menu Configuration Press the appropriate nume ric key in this example to p select DVB S eb us Use the cursor control key to T Configuration i select DiSEqC system and press the OK key to confirm P gt DiSEqc system the selection The cursor is now located in front of DiSEqC system in the set ting window Use the to select Yes or No Press the OK key to confirm the new setting EXIT N O 010 f Press the EXIT key to close the TV menu The number
63. h OK am Tone settings gen displays a list of all available functions 47 Opening the menu MENU o s r NOUR gt Picture Volume E YN devices Station table Timer Mute two stage The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 48 on 19 Sound Settings Mute Function In the menu Sound settings you can activate a two stage mute function When this function is active the volume in TY mode can be reduced in two stages with the mute key Activating the mute function Press the MENU key to open the TV menu Press the red key to open the Configura tion menu Press the OK key to move to the right side of the menu Use the cursor control key A or the corresponding nume ric key in the example to select the menu item Sound settings In the setting window use the key to set the func tion Mute 2 stage to Press the OK key to save the setting Press the EXIT key to close the TV menu In normal TV mode the mute key is used as Sound via Loudsp follows Press it once to reduce the volume by 12 scale divisions Press it again within five seconds to reduce the volume to 00
64. he HDMI or the DVI D socket If a digital TV station DVB C or DVBT is display ed on the screen it is possible to call up the pictu re of any AV set regardless of the socket it is con nected to D Activating the PIP function The F1 key is pre programmed with the picture in picture function You can use the cursor control keys lt 4 gt to move the PIP picture on screen The last position to which this picture was set is saved By pressing the OK key you can set the frame of the PIP picture to active red or inactive white The contents of the PIP picture can be changed only if its frame is active red if you wish to display the picture from a connected AV device as a picture in picture press the AV key and then use the numeric keys to select the desired AV device Pressing the red key swaps the contents of the two pictures Pressing the green key causes the PIP picture EXIT to expand to fill the screen and terminates the C PIP function To close the PIP picture press the EXIT key 40 17 Special Functions Opening the menu Normal Speech F2 Selection of Normal or Speech is des cribed in Section 12 1 Tone Settings Special functions 2 In this menu you can temporarily select Normal Speech Normal or Speech The selection remains active until you switch to another programme position switch to standby mode o
65. he OK key to confirm your selection Press the EXIT key to close the TV menu 32 Picture Volume 6 AVdevicss i ce gt Station table Ny Timer 2 z Configuration EXIT C 2 U3 Caution This may cause an existing connection diagram to be modified If so you must reconnect the AV devices accordingly 72 25 Registering AV Devices Setting signal types DVI HDMI t The signal type always refers to the input and output of the AV device AV devices equipped with a DVI or HDMI socket can be connected to the LCD TV with the aid of a DVI or HDMI cable respectively The connected device must be registered in the menu AV devices with Signal OUT set to DVI or HDMI as applicable Connection via a DVI or HDMI interface permits digital transfer of the picture signal from the device to the TV set The sound signal must be connected with an addi tional Cinch or optical Toslink audio cable Setting the signal type DVI or HDMI Press the MENU key to open the TV menu Press the yellow key to open the menu AV ar devices ws e Use the cursor control key s to select the AV device rui signal e Um M to change and press the OK key dA Station tabl Press numeric key use S the cursor control key to 2 2 select Signal OUT and Configuration X use the key to change H the setting RGB PSigncl OUT Signal IN
66. hen a programme for which subtitles exist starts the TV station displays a box showing the Teletext page on which these can be found Press the TEXT key to open Teletext e If this is a TOP Text station the card file is dis played Press the OK key and open any avai lable page Use the numeric keys to enter the number of the page containing the subtitles 6 Not possible with an external receiver 14 10 AV Playback Opening the menu AV playback devices with switching voltage MENU U3 Before they can be used AV devices must gt be registered and assigned to the appropri ate input sockets in the menu AV devices Playing back a recording from a video cassette DVD etc on a connected AV device is called AV playback o In order to see the picture you must programme your TV set to execute an automatic programme change at the EURO socket to which mum FIN 0 rid 9 8 the AV device is connected Programming a programme 34 Picture Volume change ce devices 5 4 This menu item isnot A 25 available in a 2 Timer 2 menu see Section 30 Configuration 1 Scope of Operation t The automatic program EAT gt Change stations on me change is set in the factory to ON for all The TV menu appears on the screen e Press the red key The menu EURO sockets Configuration is displayed Use the correspo
67. ia DVB T The programme starts at 22 45 hours ends at 23 40 hours and is broadcast on ITV Set up a manual timer as described in Section 17 Special Functions 2 or set a timer with the aid of the EPG as described in Section 20 3 Using EPG Recording a Programme The timer recording does not use VPS Set the lead time to 3 minutes and the overrun time to 1O minutes At the programmed start time minus the pro grammed lead time of three minutes the TV set is either switched on from the standby state red LED lights with the programme position for ITV selec ted whereby the screen remains dark but the programme is sent via the EURO socket to your recorder or switched to the programme position for ITV if it is already switched on At the programmed end of the recording at 23 40 hours the programme position for ITV remains selected for the programmed overrun time of 10 minutes 08 t is not possible to switch to another pro gramme position during the programmed lead and overrun times 39 17 Special Functions Opening the menu D pening Picture in Picture In the case of TV sets with one front end the pic ture in picture function PIP can only be used for the superimposition of an AV set In this regard the following superimposition options are possible analogue TV station is displayed on the screen it is only possible to call up the picture of an AV set which is connected either to t
68. ilable only if SRS WOW is switched off 24 12 General Sound Settings t Some of the menu items are not available in a 2 menu The sound settings volume treble bass stereo wide and spatial sound can be set generally for all programme positions and saved as standard values which can be recalled at any time by pres sing the OK key Opening the sound settings menu Press the MENU key The TV menu appears on the screen e Press the blue key The menu Picture and sound and the menu item General picture settings are pre selected Use the corresponding numeric key in the exam ple to select General sound settings NUU OO SO Use the corresponding numeric keys to select the desired menu items in the right hand column Press the OK key to open the selected menu item for editing In the setting window use the key to change the setting Use the cursor control key W to select the third line Save as standard value If you wish to save the new setting use the key to select Yes Press the OK key to save the new settings as standard values Press the EXIT key to close the TV menu t If the standard values do not provide satis factory results for some programme posi tions you can make different individual set tings for these positions See sections 12 1 12 General Sound Settings Opening the menu t Some of the menu items are n
69. ing numeric keys in this example for the Bachlight control to select Pu Press the blue key The menu Picture and sound and the menu item Gene the desired menu items Use the key to change the settings for ok Backlight control EXIT Press the OK key to save the changed setting C as a standard value Press the EXIT key to close the TV menu Die Anzahl der Themen und Kapitel ist abh n gig vom eingestellien Bedienumtang Die Anordnung der einzelnen Men punkte kann sich abh ngig von der Ger teausstattung in der Reihenfolge und Nummerierung ndern 19 Opening the menu MENU CD E WAV devices 5 Station table gt Timer x Configuration gt Picture improvment on D The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 20 11 General Picture Settings E gt Some of the menu items are not available in a 2 menv Depending on the brightness of the picture shown with the setting Picture improvment on there is an extension of the bright area in the case of dark picture contents As a result dark pictures are reproduced with greater accuracy of detail The picture improvement can be set to on or off Setting the Picture improv ment Press the MENU key Th
70. ings Press the OK key and in the setting window use the key to select All FTA only or CICAM see also page 63 Press the OK key and use the corresponding numeric key in the example to Cable channe Channel 05 Blech amp Frequency 64 500MHz Symbol rate 6900 select Manual search Madulation Auto mode The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently depending on equipment 66 tart station search x e The cursor points to Chan nel In the setting window use the numeric keys to enter the channel number or special channel number or the frequency of the desired station If you know further data of the desired station select the menu items Modulation and Symbol rate and use the key or the numeric keys to change the settings there After input of the station data use the cursor control key to select the menu item Station search and press the OK key to confirm your selection The station settings are saved 23 Station Logo Opening the menu With the aid of the VPS signal a station logo with a maximum length of 15 characters is automati cally assigned to each station If this automatic assignment does not work or if you want to use a different logo you can change the setting manual
71. ion Sport L C Use the cursor control key or the cor responding numeric key to select one Users 2 of the subjects Record 1 Up to 9 subjects Use the cursor control key gt to move PONSET uL Ld comedy game quiz contest_ motor sports to the other side magazine fourism travel winter sports Use the cursor control key or the corresponding numeric keys to select one of the subjects and mark X it by pressing the OK key Up to nine subjects of interest can be mar ked for each user You can delete a mark X by pressing the OK key again Press the red key to save the selections Not possible with an external receiver 55 Opening the menu 20 3 Using the EPG Programme Information Now Showing After switching to a channel a box is displayed at the bottom of the screen as shown in the picture BI This box contains the following infor mation Channel number in this example 4 Audio mode Start end time of the programme femme nT m The time bar shows the elapsed pro Skispringen Top 50 gramme time 04 01 06 11 35 12 14 40 15 00 Skispringen Die Entscheidung Broadcasting station Programme title Date and time Time details and title of the following programme Press the green key to view additio nal information about the programme currently showing provided the respec
72. isplayed in a different order and numbered differently 7 Available only for analogue stations 29 12 1 Sound Settings for Opening the menu Programmes via TV Menu MENU E gt Some of the menu items are not available C in a 2 menu Forced mono It may happen that your TV set switches from mono to stereo in the middle of a programme alt hough no stereo sound is being transmitted This is Oo e generally caused by the local reception condi tions If you activate Forced mono for the selec ted programme position all programmes from this station will be reproduced in mono Activating forced mono Press the MENU key ld devices The TV menu appears on Station table the screen gt Timer Press the blue key The Configuration menu Picture and sound and the menu P gt Forced mono item General picture set tings are pre selected Use the corresponding numeric key in the example to select Sound settings for Pr Use the corresponding numeric key in the OK example to select Forced mono In the setting window use the key to change EXIT the setting Press the OK key to save the new settings Press the EXIT key to close the TV menu The number of subjects and sections depends t Individual sound settings can also be made on the selected scope of operation Depending in the station table on the configuration of the TV set th
73. ived with the Cl module The menu item FTA CI is available only if a Cl module has been installed and a CA module is plugged into it Making the search settings Press the MENU key to open the TV menu Press the red key to open the menu Configuration Press the appropriate nume ric key in this example to select DVB S Press the appropriate nume ric key in this example to select Search settings Use the key to select the desired setting Press the Ok key to confirm the new setting Press the EXIT key to close the TV menu 2 Setting the stations Calling the menu Automatic search 9 The DVB S station search scans the entire recep tion band for TV and radio stations and stores them in separate TV and radio station tables For details of the DVB radio mode see Section 29 in the operating instructions for the TV set If you are not satisfied with the order in which the stations are stored you can move stations to other positions in the table or delete them For further details see Section 24 Sorting stations in the operating instructions for the TV set m Z ez oov t The station search will function correctly only if the LNB frequencies have been set and sto red correctly Lm Executing the automatic sta tion search Press the MENU key to open the TV menu Press the red key to open the menu Configuration Press the appr
74. key in this exam ple Q to select DVB S The cursor is located on the line LNB supply voltage oo ol Press the appropriate nume ric key in this example Q to select Manual search The cursor then moves to Satellite If more than one satellite is available use the key to select the desired satellite In the setting window use the cursor control key gt to select the menu line Fre quency kkk gt Picture Volume 5 AV devices 2 Station table ila Timer uus Satellite 9 i Frequency 836 18 Use the numeric keys or key to set the frequency In the setting window use the cursor control key V to select the line Polarisation and use the key to select H Horizontal or V Vertical In the setting window use the cursor control key 4 to select the line Symbol rates and enter the symbol rate with the numeric keys In the setting window use the cursor control key to select the line Start station search and press the OK key to start the search The station is placed in the station table If des The number of subjects and sections depends ired you can sort or move stations to other posi on the selected scope of operation Depending tions in the table or delete unwanted stations on the configuration of the TV set the various For details see Section 24 of the operating menu items may be displayed in different i
75. l Functions Recording a programme with a timer Record The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently Use the key to set this menu item to Yes If desired press cursor control key and use the key to activate the reminder function If the reminder Pr 6 SAT 1 Date 01 05 function is active a reminder window is displayed on the screen one minute 3 Start 22 45 g End 23 40 VPS Yes Recording device Videorecorder select 0 9 set time FT timer clear timer edit 42 before the start time programmed for the timer Use the numeric keys to select the pro gramme position see the station table of the TV set which is to make the pro gramme available for recording Press the cursor control key W and use the numeric keys to enter the date start time and end time of the programme you want to record t If you inadvertently enter a wrong time you can delete it with the Il key or overwri te it with the numeric keys Press the cursor control key W and use the key to select the recording device connected to the TV set which is to be used for the recording Press the OK key to save the programmed set tings The settings are stored in the timer memory Press the EXIT key to clo
76. letext setting marks 13 Volume 28 Volume correction automatic 26 Winter time 37 DOOM nso eu oes tuere aptus 26 Connect To connect PC to the LCD TV you must first regi ster the PC with the LCD TV see Chapter 25 Registering AV Devices Set the signal type for the PC to DVI A analogue with VGA cable or DVI D digital with DVI cable depending on the connection type Use a suitable connection cable to connect the PC to the LCD TV Power on the LCD TV press AV and select the PC connection with the respective number key Power up the PC and wait Usually the LCD TV will recognise the PC and display the image If possible select a resolution of 1366 x 768 pixels 60 Hz If these steps do not result in a satisfactory display of the PC image proceed as follows 1 Before you connect the PC to the LCD TV set the resolution to 1024 x 768 pixels and the refresh rate to 60 Hz For graphics cards with two out puts e g VGA and DVI set the operating mode to clone to display the same image on both outputs 2 Install the latest graphics cards driver Most graphics cards have an ATI or nVidia graphics chip For all ATI based graphics cards the drivers can be downloaded from www ati com often catalyst drivers The latest drivers for all nVidia based graphics cards are available at www nvidia com 3 If you use the analog
77. llow key 9 to gt Timer open the menu AV devices Use the cursor control key to a select the AV device to be connected and press senna ere OK key 70 25 Registering AV Devices Data Logic Opening the menu Press numeric key use the key to select the correct signal types OUT IN and press the OK key See also the operating instructions of the AV device EXIT If desired press numeric key enter a new C name for the AV device and press the OK key Use the cursor control key to select Data Logic and press the OK key Use the cursor control key to select Connect and press the OK key Then connect the AV device to the corresponding EURO socket Note In the menu Configuration in the menu point Data logic settings 1 is set This factory ep setting is valid for most AV devices e Should the AV device break off the recording after about 5 10 secs select the setting Mode 2 Data Logic transferring the 24 station table 9 E M Press the MENU key to gt Picture Volume E A devices open the TV menu e Press the red key to _ aed the menu Configura T Stotion table OO S Timer Press numeric key to select Analogue TV Press the OK key and then press numeric key to select Data Logic gt Start data trans
78. los 37 ML 2x20W Puros 37 ML 199 W 2 125 Wy The power consumption was determined with backlight control turned off see p 19 The figure provided here can turn out to be lower with backlight control dynamic and automa tic depending on the parameters set there and as a result lead to power saving Energy consumption per hour Wh Multiply the power consumption in W by 1 hour Stand by 2W 95 96 39 Technical Data Supported Signal Standards Video HDMI a 720x480i p 60Hz RGB b 720x480i p 60Hz YCbCr 4 4 4 4 2 2 c 720x576i p 50Hz RGB d 720x576i p 50Hz YCbCr 4 4 4 4 2 2 e 1280x720p 50 60Hz RGB f 1280x720p 50 60Hz YCbCr 4 4 4 4 2 2 g 1920x1080i 50 60Hz RGB h 1920x1080i 50 60Hz YCbCr 4 4 4 4 2 2 i 640x480p 60Hz RGB Video DVI D a h from Video HDMI and 640x480p 60Hz RGB DVI D analog 800x600p 60Hz RGB DVI D analog 1024x768p 60Hz RGB DVI D analog 1366x768p 60Hz RGB DVI D analog 1280x720p 50 60Hz YCbCr analog 1920x1080i 50 60Hz YCbCr analog Video Scart RGB 720x576i 50 Hz 720x480i 60 Hz Video Scart Y C FBAS Front AV 720x576i 50 Hz PAL SECAM 720x480i 60Hz NTSC Video Component IN 720x576i p 50 Hz 720x480i p 60 Hz 1280x720p 50 60Hz 1920x1080i 50 60Hz Audio HDMI Linear PCM Stereo 32 kHz Linear PCM Stereo 44 1 kHz Linear PCM Stereo 48 kHz Audio S PDIF Linear PCM Stereo 32 kHz Linear PCM Stereo 44 1 kHz Linear PCM Stereo 48 kHz
79. ly Setting the station logo Press the MENU key Press the white key to open the station table Press the F2 key to enable editing of the station table Select the programme position whose logo you wish to change Press the cursor control key gt to move to the other column Use the corresponding TV France numeric key in the exam RIL ple Q to select RTL Logo input The various letters and digits can be selected with the aid of the cursor control key lt gt You can delete single cha racters with the red key or the complete logo with the Il key Set the desired logo by repeatedly pressing the various numeric keys The lowercase letters are displayed after the uppercase letters Press the OK key to save the new logo Press the EXIT key to close the TV menu EXIT The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 67 Opening the menu 24 Sorting Stations You can move copy and delete individual stations or groups of stations within the station table Moving copying and deleting stations Press the MENU key to open the TV menu Press the white key to open the station table Use the cursor control key to select the pro gramme position which is to be moved copied or
80. ly you can select the colour standard manually for each programme position The colour standard is set in the factory to Auto matic Setting the colour standard Press the MENU key to open the TV menu Press the white key to open the station table Press the F2 key to enable j editing of the station table Use the cursor control key to select the programme posi tion whose colour standard you wish to change Press the cursor control key gt to move to the left column Use the corresponding numeric key in the exam ple to select Colour standard e Use the key to select the desired colour stan dard or to step through the available colour standards until the picture is displayed clearly Press the OK key to confirm your selection Press the EXIT key to close the TV menu 3 See glossary for an explanation 5 Available only for DVB stations 7 Available only for analogue stations 22 2 Setting Stations Automatic DVB T station search The DVB T station search operation searches the entire frequency band for TV and radio stations MENU All stations which are found are placed in separa C te TV and radio station tables See Section 28 for details of DVB radio mode If you are not satisfied with the order in which the stations are displayed you can move them to other positions or delete unwanted stations see O Opening the menu Section 24 Sorting
81. mpossible only if very strong reflec tions cause the loss of too many carrier frequencies The phase relationship between two sig nals depends on the path taken by these signals on their way to the receiver If a rooftop antenna is used almost all of the signals reach the receiver by the same path If an indoor antenna is used the signals reaching the receiver may have been reflected from objects outside the building objects such as thermally insulated windows coated with metal films reinforced concrete parts of the building persons in the vicinity or the furnishings of the room 100 The signals may also have come from a different transmitter In such cases the reception quality depends not only on the actual signal strength but also on how many carrier frequencies are cancelled out Such problems can often be corrected by adjusting the position and the alignment of the antenna In general moving the antenna a few centimetres to one side or tilting or turning the antenna can impro ve reception far more than the use of an additional antenna amplifier Simply moving the antenna a few centimetres to one side can often cause the signals to be added together instead of cancelling each other out A1 Set up of satellite system LNB supply voltage us Annex A only in the case of corresponding equipment or conversion Calling the menu The settings of the satellite antenna sy
82. n REC OTR etc Opening the menu Recording Reminder Pr 6 SAT 1 Date Start End VPS Yes No 01 05 22 45 23 40 no Recording device Videorecorder Change with select OK save the timer A3 17 Special Functions Opening the menu Picture format Adjusting the picture format F3 Press the F3 key If you press F3 briefly the function programmed for F3 see Section 18 Programming the Func tion keys is executed If you hold down F3 for about two Picture format seconds all possible selections are dis Pic form vertikal played Special functions 3 Press numeric key to select the function Picture format menu Use the P P rocker key to select the desired function After selection of a picture format you can also adjust the zoom setting by pressing the key within five seconds The settings made here except for the automatic zoom set in the TV menu remain active until you switch to a diffe rent programme position or switch off the TV set Zoom Picture position After selecting the function Zoom you can adjust the zoom factor with the key In addition you can move the picture order for example to keep the station logo or the subtitles visible To change the picture position press and hold F3 key until the selection is displayed Then press numeric key and use the rocker key to move the picture v S
83. n the configuration of the TV set the various Press the EXIT key to close the TV menu menu items may be displayed in a diferent order and numbered differently 3 See glossary for an explanation 5 Available only for DVB stations 7 Available only for analogue stations 31 Opening the menu 13 Automatic zoom t The menu item Automatic zoom is not available in a 2 menu m Z c When the automatic zoom function is active pro grammes in a widescreen format such as pro grammes in 16 9 are expanded to fill as much of the screen as possible If the function is inactive the programmes are dis played in their original format Activating the automatic zoom 2 Press the MENU key The TV menu appears on the screen eum e Press the blue key The menu Picture and sound and the menu item General picture settings are pre selected Ov adir 5 Picture Volume E devices Station table gt Timer Configuration Use the cursor control key gt to select the menu item Brightness 0 9 3 7 6 5 4 2 1 Use the corresponding numeric key in the exam Zoom value 0 Panorama Yes Picture pos vert 0 mode Non linear ple to select the func PpAviomatic zoom on tion Zoom Panorama Use the cursor control key W to select the menu item Automatic zoom EXIT Use the key to change the setting P
84. nding numeric key in this example to select the menu item Press the MENU key EURO sockets Use the cursor control key to select EURO 1 or OK EURO 2 Press the key and then in the setting win dow use the key to select Programme chan ge The number of subjects and sections depends on the selected scope of operation Depending Press the OK key to save the new setting on the configuration of the TV set the various menu items may be displayed in a different Press the EXIT key to close the TV menu order and numbered differently 15 Opening the menu 10 AV Playback If you now start to play back a recording on the connected AV device the TV set changes automa AV tically from any other programme position to the J playback mode AV playback devices without switching voltage HDMI U3 Before they can be used AV devi DVI ces must be registered and assig Front ned to the appropriate input sok YCbCr ee kets in the menu AV devices wie In order to see the played back picture py DuDrideorec 1 you must switch the TV set to playback J Select with mode o Confirm with OK Select any programme position Press the AV key Use the corresponding numeric key to select the AV device you want to use The TV set now changes from the current pro gramme to the selected playback device Start the replay fun
85. ntil it is switched to standby again Special notes The TV channel table lists all availa ble channels in the programme guide provided you do not make another selection in the channel table menu Channels broadcasting on a time shared basis e g arte Kinderkanal must be saved in separate programme slots see 24 If you include all channels in the EPG you won t be able to see very far ahead You can decide which channels should appear in the EPG programme guide As a rule the collection process gathers data for all free channels The following options are available to exclude selected channels from the EPG programme gui de Solution 1 Press the MENU key The TV menu appears on the screen Press the white key The menu channel table appears with the active programme slot selected Press F2 to permit editing of the chan nel list e Press gt to switch to the menu page Using A and Y select Include channel in EPG and dedeselect rows marked x with OK To exclude other channels from the EPG programme guide use 4 gt A and V to select the channel and repeatthe procedure Not possible with an external receiver 52 20 2 Collecting EPG data Solution 2 Press the MENU key The TV menu appears on the screen Press the white key The menu channel table appears with the active pro gramme slot selected Follow the steps described unde
86. nu are available and are supple mented by the following functions gt Childlock Oo Timer control sleep timer Automatic station search Transfer of the TV station 9 table from the TV set to a a Data Logic video recorder Editing functions in sta 5 Picture Volume tion table cen devices 3 This is the opera 775 ting scope for per gt Timer sons who are inter configuration ested in technology a who want to be able to use the full Operating range of functions of the TV set Setting the scope of operation Press the MENU key to open the TV menu EXIT 0 9 8 7 6 5 4 3 2 Press the red key to open the menu Confi guration Use the cursor control key gt to move to the menu line Initial programme position Press the numeric key to select Scope of operation In the setting window use the key to select the desired scope of operation Press the OK key to save the new setting The number of subjects and sections depends Press the EXIT key to close the TV menu on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 81 82 30 Operation without the Remote Control Operation without the remote control is provided as an emergency measure in case the batteries of your remote control a
87. o The menu of a con nected AV device such as a DVD play er is not visible on the TV screen Select the AV program me position and set the picture format to 16 9 or Automatic see Sec tion 37 Register the AV device with the signal type RGB see page 68 109 Index Automatic station search 61 63 65 105 AV devices connecting registering 69 AV devices removing 75 AV programme position 16 AV playback devices with switching voltage 15 AV playback devices without switching voltage 16 Batteries for the remote 6 Brigbingss iusso ders 7 18 Camcorder connecting 69 85 Childlock 33 Childlock activating 33 Childlock deactivating 34 Childlock permitted programmes 34 Cleaning 84 Code for childlock 34 Colour 62 Connect a PC 113 Connections on front and rear 85 86 Copying recordings 89 Country 58 Datalogic video recorder 70 Decoder D Box connecting 69 Direct recording OTR 43 Double font size 13 DVD player connecting 69 DVD player removing 75 Electronic Programme Guide EPG 50 EURO sockets 15 86 Exte
88. opriate nume ric key in this example to select DVB S Press the appropriate nume ric key in this example to select Automatic search In the setting window use the key to select desired satellite Use the cursor control key gt to move to the EXIT 1 Mi ES 2 kak E Picture Volume 5 AV devices Station table S Timer configuration or nu Satellite 19 2 We Start station search menu line Start station search Press the OK key to start the station search The TV set searches for the specified stations and places them in a station table which is then displayed If desired you can sort or move stations to other positions in the table or delete unwanted stations The number of subjects and sections depends For details see Section 24 of the operating on the selected scope of operation Depending for the TV set on the configuration of the TV set the various instructions tor the IV set menu items may be displayed in a different order and numbered differently 105 A2 Setting the stations Manual search For the manual search you must know the fre quency the symbol rate and the polarisation of the station for which you want to search Calling the menu m Z c Executing the manual search Press the MENU key to open the TV menu Press the red key to open the menu Confi guration Press the appropriate numeric
89. ot available in a 2 menu MENU Setting SRS WOW 2 a7 Press the MENU key The TV menu appears on the screen Press the blue key The menu Picture and sound and the menu item General picture set tings are pre selected Press the numeric key to select General sound set tings Use the corresponding numeric key in the example to select SRS WOW 2 In the setting window use fig the key to change the Configuration setting 2 3 Press the OK key to save PSRS WOW on the changed setting Press the EXIT key to close the TV menu t If the SRS WOW function is active the menu items stereo wide and spatial sound are disabled 3 A devices 2 Station table r S Timer 2 1 deir m ep The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 2 Possible only on sets equipped with this function 3 See glossary for an explanation 4 Available only if SRS WOW is switched off 25 Opening the menu MENU E AV devices Station table gt Timer Configuration 12 General Sound Settings Automatic volume correction Some TV stations transmit their commercials at a higher sound volume than that for the normal pro gramme In order to save you
90. ou can step through these sub pages with the cursor control key 9 Teletext Double font size You can double the size of the font used for Teletext pages with the F1 key Pres sing this key once displays an enlarged picture of the upper third of the page Pressing ita second and third time dis plays the centre and lower thirds of the page Pressing a fourth time displays the entire page again Riddle key display hidden text Function key F2 is programmed in the factory to display hidden text such as the answers to riddles Back to the last index page You can return directly to the last index page you have displayed by pressing the numeric key Stop page scrolling The Il key or the OK key can be used to stop the automatic scrolling executed by some pages and to enable this again Page selection with the cursor Press the OK key to stop page scrol ling The cursor is now positioned at the top left corner of the page and you can use the cursor control key 4 gt A V to position it anywhere on the displayed page This function is useful on index pages such as pages 100 200 etc in order to select a page you want to see After positioning the cursor on the des ired page number press the OK key to display its contents Setting marks in Teletext 9 As a user of Teletext you will probably want to visit certain pages such as stock market news news pages or the weather forecast regularly
91. press the corres ponding numeric ley in the example to select Automatic search The cursor is now on the line Symbol rate 1 Station table 1 NOO gt Oe N OO gt t The most common symbol rates are already preset Usually these settings do not need to be modified If the symbol rate settings do not yield the desired result set other sym bol rates and save them by pressing OK Ask your cable operator for details 2 Press the cursor control key to select the menu The number of subjects and sections depends line Start station search on the selected scope of operation Depending en on the configuration of the TV set the various Press the OK key to start the search The TV menu items may be displayed in a different set now searches for available stations order and numbered differently depending on equipment 65 Opening the menu MENU D 3 Picture Volume E AV devices Station table gt Timer gt Ore NO 22 3 Setting Stations Manual DVB C station search For a manual station search you must know the channel number or the frequency of the station you wish to find Executing the manual search Press the MENU key to open the TV menv e Press the red key to open the menu Configuration Use the corresponding numeric key in the example to select DVB C The cursor is on the menu line Search sett
92. r 24 Sort channels to sort and save your favourite channels so that they appear at the top of the list for example sort 1 50 and save them Select EPG Settings from the Confi guration menu and under Prog select in the channel table select Channels 1 50 using the key and save by pressing OK The collection process will be halted if videotext is opened a recording has been programmed under AV Recording a preset recording is running or will begin in an hour the videotext subtitle function is active If the TV is switched to standby during the collection process the green LED will appear to indicate that the process is still running Not possible with an external receiver 53 Opening the menu 20 3 Using the EPG Once all of the EPG data have been collected briefly pressing the EPG key displays the EPG with the current programme on the selected pro EPG gramme position highlighted The following keys have special functions in EPG mode Sp Select a programme View the selected programme or set reminder for it ER Scroll to earlier or later program 4 Di Mi Do Fr Sa So 29 04 aret 11 15 mmm Schleswig Holstein Magazin mes 0 9 Enter a time for display of the All programmes programmes starting at or after selection this time A interest Back to the previous programme Use
93. r switch the TV set off completely This setting has no effect of the setting described in Section 12 1 Tone Set tings Timer Overview Direct recording 17 Special Functions roe Opening the menu Recording a programme with a timer If you wish to record a programme which your F2 video recorder or DVD recorder cannot receive directly because it does not have a suitable tuner such as DVB T or DVB C you can use the Timer overview to make such programmes available to the recording device Fl Setting a timer manually for a recording C Press the F2 key If you press F2 brie EZET 1723 fly the function programmed for F2 d F Mon Tue Wed Thu Sat Sun 29 04 see Section 18 1 Programming the function keys is executed If you hold down F2 for about two par seconds all possible selections are 2 p displayed VPS If all possible selections are display Recording aevice K Videorecorder ed press the corresponding numeric Change with f key in the example toopenthe RA a timer menu If a timer already exists press the F1 The number of subjects and sections depends key on the selected scope of operation Depending i the configuration of the TV set the various The cursor is located at the left of the first line menu items may be displayed in a different order and numbered differently 41 Opening the menu Recording Reminder 17 Specia
94. re exhausted or the remote control is not readily available You will find the local control on the bottom of the TV set on the left side Milos or behind a flap Puros Talio which is opened by pressing Switching on Press the main power switch on the TV set After about five seconds the TV set is switched on with programme position 1 or the programmed initial programme position selected You can also use the following functions directly on the TV set without a remote control For func tions which require further adjustments the func tion remains preselected for ten seconds Programme selection Press the buttons Volume Press and hold the preselection key F until the bar display for the volume appears on the screen Then press the or button to adjust the volume Contrast Press and hold the preselection key F until the bar display for the contrast appears on the screen Then press the button to adjust the contrast 31 Connecting Headphones The headphone socket is located behind flap on the left side of the TV set see Section 35 Tilt the flap on the Milos up with your fingernail On the Puros or Talio open the flap by pressing eee See also ch 35 We recommend the use of headphones with an impedance of at least 32 Q The use of headpho nes with a lower impedance will reduce the dyna mic range of the sound You can save the headphone volume as a stan dard v
95. ress the OK key to save the new setting Press the EXIT key to close the TV menu The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered differently 32 14 Childlock Opening the menu With the aid of the childlock function you can determine whether or not the TV set can be swit MENU ched on and which stations may be selected at which times The childlock can be set such that a it is always active b one to six TV radio or AV programmes Prog A Prog F are exempted from the locking func tion permitted programmes or c all programmes or programmes which are not locked may be viewed during a permitted time period TV start TV end The childlock must be saved once with a 4 digit code password a Activating the childlock Press the MENU key The TV menu appears on the screen E 4 _ Press the green key to Picture Volume open the menu Timer TT deis gt 0 Use the cursor control key gt 9 to select Settings and S Tine press the OK key gemere In the setting window use the cursor control key to viewing fime RUD CNN viewing time select the menu item Acti Activation vate and then use the key to set the childlock to Active
96. ressing the yel on r set eee By menu items displayed in low key and using the key order and numbered differently 77 27 Sound via HiFi Amplifier HiFi output On the rear of the TV set you will find audio MENU sockets and a digital audio out socket see page 81 which can be used to connect the TV set to a HiFi system HiFi amplifier Opening the menu If you wish to play back the sound only via a HiFi system HiFi amplifier which is connected with the aid of a Cinch cable you must select the function Sound via HiFi If you wish to play back the sound only via a HiFi system HiFi amplifier which is connected with the aid of an optical audio cable Toslink available as an accessory the follo wing settings should not be made 3 Picture Volume E A devices Setting sound via HiFi Press the MENU key to open the TV menu Station table ip e Press the red key to open Timer 2 the menu Configuration NOUR Press the OK key to move to the right hand column Mute two stage on p gt Sound via HiFi Use the cursor control key A or the corresponding nume ric key in the example to select Sound settings 0 In the setting window use the cursor control key EXIT gt to select the menu item Sound via J Use the key to select Sound via HiFi Press the OK key to sa
97. rfunk Fernsehen 4 Sport Bayern Schlagzeilen bersicht 100 ProSieben 56 Bl talk 0 56 S 0 S Style amp H Dm 7 Computer Wurm TED Brauchen wir Schutz Weitere Meldungen 00 01 02 03 04 05 06 07 08 09 Page number Sub pages 12 9 Teletext Teletext is an additional service provided free of charge by many TV stations It is an electronic magazine through which you can browse in various ways Opening Teletext Press the TEXT key If the selected station offers TOP Text a card file is displayed see the picture on the left If TOP Text is not available Teletext page 100 is displayed see the pictu re below Impressum 2t In the TOP Text card file you can select the desired cards with the cur sor control key or with the numeric keys Press the OK key to open the selec ted card Controlling Teletext with pages displayed mm Blue key next subject Yellow key next section White key next page After pressing the coloured pre selec tion key you can step through the sub jects sections or pages with the cursor control key or with the numeric keys If you wish to select a specific page enter its page number on the numeric keys If sub pages exist for the selected page the page numbers are displayed in black In the example shown here there are five sub pages Y
98. rnal devices playback 15 External devices connecting 69 86 Font size double 13 Forced mono 30 Freeze frame 7 Function 7 47 Glossary s EEA 92 Headphones 83 85 Helper ete eaten 10 HiFi 77 Info Information 10 Initial programme position 76 Interests see 55 Language for TV menu 58 Marks in Teletext clearing l4 Marks in Teletext overview 12 Marks in Teletext scrolling by 13 Marks in Teletext setting 13 Menu language 58 Menu menu control 11 Multiple pages sub pages 12 Noise reduction 18 20 OM Nites edt eles See tees 36 On HiME eoo b ees 336 Operating mode 8 19 45 PC connect 113 Picture A4 Picture A4 Picture quality from video recorder 17 Picture settings 8 18 20 21 Picture sharpness 18 Playing back from external devices 15 16 Premiere decoder see AV device Programme guide 50 Programme switching for AV devices 9 Radio mode with DVB 79 Reception type 59 Recording with the EPG 57 35 55 Rid
99. rs of the selected station Record Show all following programmes amp of the selected station F1 Forward to the following pro gramme of the selected station blue Select all programmes yellow Programme selection on the basis of the selected user and his interests white User can set interests green Select user father mother teenager child red Make the selected programme available for recording see page 57 EXIT Back to the TV picture Scroll by days trough the EPG EXIT Not possible with an external receiver 54 20 3 Using the EPG Opening the menu Selecting a programme and viewing or setting a reminder In the EPG you can select a programme with the cursor control key Press the OK key in order to view the programme if it is already running or set a reminder for it if it has not yet started A green check mark is displayed after the start time Press the TEXT key to display and hide a des cription of the programme This may not be possible for some programmes Setting a user profile By pressing the green key several times it is possi ble to set up the EPG for the current user father mother teenager child Setting interests Each user can set up the EPG to reflect his or her special interests 9 3 ES idis 8 7 All programmes 5 Press the white key 6 Select
100. scope of operation can be set to various levels which are identified by asterisks 1 Just watching TV in other words it is not possible to open the TV menu and only the functions available on the remote control can be used Zapping Selection of programme positions with the nume ric keys the oval P P rocker key or the white key Opening Teletext Displaying help information INFO Playing back films from a video recorder or DVD player by pressing the AV key Selecting Special functions 1 by pressing the F1 key Selecting Special functions 2 by pressing the F2 key Selecting Special functions 3 by pressing the F3 key Selecting connected AV devices by pressing the AV key Calling the standard picture functions by pres sing the blue key og the standard sound functions by pressing the yellow key Calling the EPG function with the EPG key If the scope of operation is set to a 1 menu and you subsequently want to open a menu then Press and hold the MENU key for at least five seconds to open the TV menu The menu item Operation is automatically selected 29 Scope of Operation Opening the menu Use the key to select the desired scope of operation and press the OK key to save the MENU new setting C 2 This menu permits you to configure the use of the TV set to a certain degree All of the functions listed for the 1 me
101. se the TV menu Clearing a timer Press the F2 key Press numeric key to open the timer menu Use the cursor control key to select the timer you wish to clear and press Il to mark it for deletion A window is displayed on the screen asking whether you really want to clear this timer Confirm the intended action by pressing the appropriate key 17 Special Functions Direct recording of a programme If you wish to record the programme you are cur rently watching you can start a direct one touch recording to make the current programme availa ble to a recording device connected to the EURO sockets Starting a direct recording Press the F2 key If you press F2 briefly the function programmed for F2 see Section 18 Programming the Func tion keys is executed If you hold down F2 for about two seconds all possible selections are displayed Press numeric key to open the timer menu window The timer menu window displays the programme position the date and the EPG data for the current pro gramme or for the next two hours If there is more than one AV device connected to your TV set use the cur sor control key W to select the propo sed recording device and use the 8 key to select the desired device Press the OK key to save the settings U3 On the recording device e g video recor der select the AV programme position and start the recording by pressing the appro priate butto
102. sor control key W to select the third line Save as standard values If you wish to save the new setting use the EXIT key to select Yes C 2 Press the OK key to save the changed setting as a standard value Press the EXIT key to close the TV menu tS f the standard values do not provide a satisfac The subjects os picture in some programme positions you on tne selected scope or operation Dependin PU opes ofthe TV Ep Vu can make settings for these positions which dif menu items may be displayed in a different fer from the standard valves See the next sec order and numbered differently tions 11 1 and 11 2 18 11 General Picture Settings Opening the menu t Some of the menu items are not available in a 2 menu MENU The backlight control factory setting off can be set to dynamic or automatic With dynamic the backlight control is adjusted according to the picture contents With automatic the backlight control is adjusted according to the ambient brightness gt The backlight control can be set generally for all programs and saved r aee Set backlight control 3 HL NIRE Press the MENU key e em The TV menu appears on 29 table the screen 5 ral picture settings are pre iE gt Backlight control off selected Use the cursor control key to select the menu item Brihtness Use the correspond
103. stations Executing the automatic station search Press the MENU key to open the TV menu Press the red key to open the menu Confi guration Use the nume g ric key in the example 0 to select DVB T HN 1 9 In the setting window Anten x 8 na you can switch the sup 7 f Picture Volume 6 ply vo or an antenna on f or off with the key d devices mmo Normal setting Off i Station table 4 3 2 The setting On may be used SO Timer only if you have an active indoor antenna which needs a supply voltage for its inter nal ampli ier Start station search Use the corresponding numeric key in the exam ple to select Search settings In the setting window use the key to select one of the following All search for all stations FTA only search for only unencrypted free to air stations FTA CICAM search for FTA stations and sta tions which can be decoded with a Cl module accessory The number of subjects and sections depends Press the OK key and use the corresponding on the selected scope of operation Depending numeric key in the example to select on the configuration of the TV set the various Automatic search menu items may be displayed in a different order and numbered differently Press the OK key to start the search The TV depending on equipment set now searches for availabl
104. stem must be entered in the menu Configuration so that the TV set knows them MENU i These settings should always be made in the C D order in which they are shown in the right hand column of the menu starting at the bottom i e LNB supply voltage DiSEqC system etc LNB supply voltage 0K The LNB voltages for selection of the polarisation hori OK zontal H 18V vertical V 14V are already set and do not nor A vn mally need to be changed he e If the cable to the satellite 200 antenna is very long the vol Picus volume 5 A devices tages reaching the LNB may be too low In such cases the voltages can be increased by 3 05 1 V by activating the line gt Timer compensation function NB ae voltage Power compensation as follows Changing the settings Press the MENU we to open the TV menu Press the red key to open the menu Confi guration NOU gt C p Press the appropriate numeric key in this exam ple Q to select DVB S Press the OK key and in the setting window use the key to switch the LNB supply voltage on or off C Press the Ok key to confirm the new setting Press the EXIT key to close the TV menv The number of subjects and sections depends i on the selected scope of operation Depending I If the TV set is connected to a community on the confi
105. t Noise reduction light Press the MENU key The TV menu appears on P d C 2 Possible only on sets equipped with this function 3 See glossary for an explanation 5 Available only for DVB stations 7 Available only for analogue stations 22 the screen Press the blue key The menu Picture and sound and the menu item General picture set tings are pre selected Use the cursor control key A to select the menu item Pic settings for Pr And press the OK key Use the corresponding numeric keys in this example for noise reduction to select the desired menu items In the setting window use the key to change the setting Press the OK key to save the new setting Press the EXIT key to close the TV menu 11 2 Picture Settings Programme via Station Table PEn ng the menu Individual picture settings for MENU programme position xy Select the programme position whose picture settings you wish to change Press the MENU key The TV menu appears on the screen Press the white key The station table is dis played with the currently active programme position highlighted Press the F2 key to enable editing of the station table v ofl Press the cursor control key gt to move to the subject side 5 Picture Volume 2 Use the corresponding pow pu numeric keys in this exam amp ple for the picture quali gt Tim
106. tandard 4 3 This is the standard setting for all programmes in the 4 3 picture format 44 17 Special Functions Picture format Panorama With the aid of the panorama function you can expand programmes broadcast in 4 3 format to fill the screen of a 16 9 TV set The picture is expanded uniformly in the horizontal direction You can also zoom the picture The panorama function can be activated and deactivated in the menu Standard 4 3 5 item General picture settings of the panorama menu Picture and sound 16 9 full picture 2 ciem Panorama 16 9 full picture Zoom 16 9 Full picture This function serves to display pictures from external devices such as a 16 9 video recor der with the correct aspect ratio Opening the menu A5 Opening the menu F3 46 17 Special Functions Picture Position If desired the picture can be shifted up or down in order for example to make subtitles visible or to hide ticker displays Adjusting the picture position Press the F3 key If you press F3 briefly the function programmed for F3 see Section 18 Programming the Function keys is executed Special functions 3 Picture format UT Press numeric key to select the function Picture position vertical You can now use the key to move the picture up and down on the screen so that for example the station logo or the subtitles are visible 087 This setting is not sa
107. ted only if the correct code is entered Press the OK key to save the settings Press the EXIT key to close the TV menu Switch off the TV set with the key t childlock is not fully activated until the TV set is switched off Deactivating the childlock s If the childlock is active a window requesting your personal code is displayed each time the TV set is amp E switched on Entering the correct code enables the S TV set and it can then be used dad until it is 5 E switched off again To cancel the childlock func Er tion proceed as described in step a above and Dye set the childlock to Inactive 15 Reminder Opening the menu t The menu item Reminder is not available MENU in a 2 menu C If you wish to be reminded of something while watching TV you can set a reminder for any des ired time At this time a window with the remin der appears on the screen Setting the reminder time Press the MENU key to open the TV menu Press the green key 9 to open the Timer menu mm Press the numeric key to select Reminder 4 are Press the OK key and EKK then in the setting window Picture Volume enter the desired time four AV devices digits with the numeric b Station table Press the OK key to save a Reminder 5 4 3 this setting M configuration 1 D Reminder Press the EXIT key to close gt the m TV menu At
108. th this function 3 See glossary for an explanation 4 Available only if SRS WOW is switched off 27 12 1 Sound Settings for Opening the menu Programmes via TV Menu MENU E gt Some of the menu items are not available C in a 2 menu Volume correction Various TV stations broadcast their programmes with different sound volumes This volume diffe rence can be minimised by correcting the volume o This adjustment remains active even if the stan dard sound values are recalled Adjusting the volume correc 9 tion 25 Press the MENU key The TV menu appears gt Picture Volume the screen 5 AV devices i Press the blue key The Station table rae gt Timer Picture and sound and the configuration menu item General picture settings are P Volume correction 15 pre selected Use the corresponding numeric key in the exam ple to select Sound settings for Pr Press the OK key and then in the setting widow use the key to change the setting Press the OK key to save the new settings 8 Press the EXIT key to close the TV menu EXIT 02 Individual sound settings can also be made C 2 in the station table The number of subjects and sections depends on the selected scope of operation Depending on the configuration of the TV set the various menu items may be displayed in a different order and numbered diff
109. tic DVB T station search 63 Manual DVB T station search 64 Automatic DVB C station search 65 Configuration Worth knowing Contents Manual DVB C station search 66 Station 67 Sorting Stations 68 Reg AV Devices 69 Data Logic rne 70 Setting the signal types RGB 72 Setting the signal types DVI HDMI 73 Setting the signal types YUV 74 Removing AV Devices 75 Initial Programme 76 Sound via HiFi Amplifier HiFi output 77 DVB Radio Mode 79 Scope 80 Operation without Remote Control 82 Connecting Headphones 83 Sound 1 Sound 2 83 Cleaning the TV 84 Connections on 85 Connections on the Rear of the Set 86 Connecting a Hifi Amplifier AV Receiver 87 Copying between AV Devices Direct recording 89 Setting the Picture Format 91 Glossary lou be 92 Technical Data 95 Upgrade Kits 97 Inserting Removing CA Modules 98 Basic differences between analog terrestrial reception and DVB T 99 Appendix for DVB satellite reception applicable only if a
110. ue VGA graphics card output use a fully wired 15 pin VGA cable in order to ensure that the information exchange between the PC and the LCD TV works DDC 113 Portal stations Various pay TV stations broadcast portal stations These portal stations are filled with sub stations or optional channels In station search see ch 22 in Search settings the setting all only free or free CICAM must be set so that these stations can be found too o AEk After a station search the portal sta SEI tions and the accompanying optional 355 channels may also be identified in the s station table as SID xy will be shown ATI in the station table on various program Portalsender 3 places 1 ARD h done 1 56 Hessen 3 We have programmed a simple way for you to find optional channels quik kly E O If you select a portal station via the sta E PPM tion table see p 9 a suitcase symbol appears next to the station logo This suitcase can be opened by pressing the white button repeatedly All optional channels inclu ded in this suitcase then appear in the station table Other stations are not shown simultaneous ly In this way you can switch quickly bet ween the optional channels Es Optionskanal 4 A Optionskanal 3 eth NEUE m n 2 Optionskanal 1 Best tigen mit OK 114 Your Metz product was de
111. ve station 41 Basic differences between analog terrestrial reception and DVB T Information for our dealers and interested customers In order to understand how the behaviour of DVB T receivers differs from that of the analog terrestrial receivers used until now two things are important digital transmission and the simultaneous broad casting network Digital transmission A DVB transmitter does not transmit only a single programme but a set of pro grammes normally six to eight The information for each programme the picture the sound and teletext is con verted into a digital format i e into numerical values which are grouped together in packets The packets of the various programmes are then transmitted sequentially in a so called transport stre am Further information which permits the receiver to detect and correct any errors which occur during transmission is added to this transport stream Example If the information or 1 is to be transmit ted the could be encoded as 000 and the 1 as 111 If one of the three digits numbers is falsified during transmission i e the receiver receives for example 010 instead of 000 the receiver can decide that the presence of at least two zeros indicates that the intended informa tion value was and correspondingly that at least two ones indicates the infor mation 1 If two of the numbers in a block are chan ged the receiver can detect th
112. ve the new setting Press the EXIT key to close the TV menu The number of subjects and sections depends on the selected scope of operation Depending 4 In normal TV Mode function Sound via menu items may be displayed in a different can be activated temporarily by pressing the yel order and numbered differently low key and using key 2 Possible only on sets equipped with this function 78 28 DVB Radio Mode Opening the menu To switch from TV mode to DVB radio mode press the R key R The screen is automatically blanked after about 30 seconds To switch from DVB radio mode to TV mode press the TV key Setting DVB radio stations The available DVB radio stations are automatical ly detected during a station search see Section 22 and stored in a separate station table at the operating level for radio mode The radio station table can be sorted see Section 24 and the station logos can be changed see Section 23 gt DVB radio stations are administered in the same basic way as DVB TV stations The functions described in Sections 12 12 1 15 to 17 2 and 18 Special functions Normal speech Timer overview and Direct recording are also available for radio sta tions 79 80 29 Scope of Operation The adjustable scope of operation for the TV set can be a great help in finding your way around the complex operating functions of the TV set The
113. ved If you wish to save it as a global setting use the procedure described in Section 11 to set it 18 Programming the Function Keys Opening the menu The remote control has four function keys F1 F2 F2 F3 and AV You can programme these function C keys with any of the available functions V d Special functions 2 If you press and hold any function key a window with the available functions is dis played The picture on the left shows the functions available for the F2 key Normal Speech Programming function key F1 F2 F3 or AV with a function Timer overview Press the MENU key to open the TV SSE 5 Direct recording menu Y Press the red key to open Confi guration menu MENU Press and hold the F1 key to display the availa ep ble functions Use the cursor control key WA or the correspon 5 ding numeric keys to select desired Func FI tion for in this example F2 C Press the OK key and then use the cursor con trol key to select one of the available functions v Press the OK key to assign this function to the selected function key the selected function is marked with X Press the EXIT key to close the TV menu gt Picture Volume t If a function key is pro 7 devices grammed with func Y Se tion this function can be amp n called by briefly pres a m sing the function key Configuration aie value wit
114. veloped and manufactured with high quality materials and components which can be recycled and or re used This symbol indicates that electrical and electronic equipment must be disposed of separately from normal garbage at the end of its operational lifetime Please dispose of this product by bringing it to your local collection point or recycling centre for such equipment This will help to protect the environment in which we alll live Errors excepted Subject to changes 115 Metz Werke GmbH amp KG Postfach 1267 D 90506 Zirndorf Fon 49 911 97060 Fax 49 911 9706340 www metz de info metz de Errors excepted Subject to changes Printed in Germany Metz always first class 4 T a Metz Werke GmbH amp Co KG Zirndorf near N rnberg Core competence in the areas of electronics and plastics technology to form the basis of the excellent reputation of the Metz Werke that has been built up throughout the world over a period of many decades Metz offers quality made in Germany Consumer electronics mecablitz flash units plastics technology and industrial electronics
115. you are not sure what a menu item does press the INFO key for more information Cursor Subject Section OC FG ON Related numeric keys In order to return to the menu press the INFO key twice You can open each of the five main sections of the menu with the key of the corresponding colour The card file which is then displayed is subdivi ded into Subjects on the left and Sections on the right and you can select these by moving the red triangular cursor with the oval cursor control key or with the numeric keys When you press the OK key the current setting for the selected item is shown in the Setting win dow below the card file and can be adjusted with the key You can save the new setting by pressing the OK key which also returns you to the list of sections If you do not want fo save the new setting press the The number of subjects and sections depends MENU key to return to the corresponding main on the selected scope of operation Depen ding on the configuration of the TV set the menu or press the EXIT key to close the menu 779 0 ee ge You can delete any incorrect inputs with the Il key different order and numbered differently 11 Opening the menu Subjects chapter Pages Next BookMar select mark 100 4 v Subjects Chapter Pages Next BookMar select mark A 100 wv BR Intern H

Metz LCD-TV None User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents