Home

McIntosh MVP871 User's Manual

1. GROUP TITLE MPEG JPEG rears WMA MP3 HDMI 480P 576P FVG IEEE1394 DV 720P 1080i Indicates Indicates Title Indicates the Indicates the type of Digital when the Number on the current Multi Signal being decoded by the Pause Disc and the Channel Sound MVP871 which includes DTS Mode is Group Number track is down Dolby Digital Packed Pulse active on DVD Audio mixed and avail Code Modulation PCM Linear Discs able at the 2CH PCM MPEG and MP3 Outputs as a ste reo audio signal Indicates Indicates the Indicates Track or Indicates the current Track When the indicator is On Steady the Source Progressive Chapter Number Time Remaining Track actual communication is occurring Video Signal Scan Video of the Disc Time Total Disc Playing between MVP871 HDMI Output Type F for Processing Time and various other Infor and the TV Monitor s HDMI Film based Circuit is mation Input When the indicator is just V for Video active flashing the HDMI Output is se based or G lected with no communication oc for Graphic curring between components based Note Items not identified above are for use with other McIntosh Components Ile Remote Control Push Buttons Use to change the brightness of Use to select NTSC or PAL the Front Panel Alphanumeric Use to toggle the video output format Display from bright to off power On and Off to the MVP871 Use to access the Setup Use to access the standard or Menu one of five pres
2. Audio Video Player Manufactured under license from Dolby Laboratories Dol DTS and DTS Digital Surround are registered trademarks by MLP Lossless and the double D symbol are trademarks of DTS Inc of Dolby Laboratories HocD HDCD High Definition Compatible Digital and HDMI the HDMI long and High Definition Multimedia Microsoft are either registered trademarks or trademarks of Interface are trademarks or registered trademarks of HDMI Microsoft Corporation Inc in the United States and or other Licensing LLC countries HDCD system manufactured under license from Microsoft Corporation Inc This product is covered by one This product incorporates copyright protection technology or more of the following In the USA 5 479 168 5 638 074 that is protected by U S patents and other intellectual property 5 640 161 5 808 574 5 838 274 5 854 600 5 864 311 rights Use of this copyright protection technology must be 5 872 531 and in Australia 669114 Other patents pending authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by DivX DivX Certified and associated logos are trademarks of Macrovision Reverse engineering or disassembly is prohib DivX Inc and are used under licence ited MVP871 Owner s Manual McIntosh Laboratory Inc 2 Chambers Street Binghamton New York 13903 2699 Phone 607 723 3512 FAX 607 724 0549 The lightning f
3. Power On The Red LED above the STANDBY ON switch lights to indicate the MVP871 is in Standby mode To Switch ON the MVP871 press the STANDBY ON Push button on the Front Panel or on the Remote Control either the PWR Power or POWER ON Push button Refer to figures 71 and 72 Notes When AC Power is initially applied to the MVP871 the unit will momentarily switch On and then go into the Standby Mode If a disc has already been loaded in the MVP871 just press the PLAY Push button on the Front Panel or Remote Control and the player will switch On and the disc will start playing How to Load a DVD SACD or CD Disc 1 Press the OPEN CLOSE Push button The disc tray will slide out allowing a disc to be loaded Refer to figures 71 and 73 Note When the player is in Standby Mode the MVP amp 71 Power will automatically Switch On when the OPEN CLOSE Push button is pressed 2 Press the OPEN CLOSE Push button and the disc tray will close If the tray contains a DVD disc it will start playing the first track How to Play a DVD Disc BACK PLAY NEXT With a disc already loaded into the MVP871 press the PLAY gt Push button on the Front Panel of the MVP871 or the Remote Control Refer to figures 71 and 72 Note When a DVD Video or to play without pressing the PLAY Push button When a SACD or CD disc E m oN m a is in the tray the disc s O GO Table of Contents number UT ot of tracks and tota
4. 5 Next continue to the AUDIO VIDEO SYNC Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Audio Video Sync Due to the difference in the amount of time it takes for the processing of the Video and Audio signals they can be out of synchronization which is especially noticeable with dialog The MVP871 allows for the correction of any loss of sync There are separate settings for HDMI Digital Video Analog Video both Interlaced and Progressive Scan modes and OTHER which is a variable setting with an offset delay 0 200ms The variable delay is useful when multiple video connections such as Interlaced Progressive and Digital are all used simultaneously The default setting is Analog Progressive Scan Video To change from the default setting perform the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Video Menu Icon Tab Refer VIDEO SETUP to figure 24 TV ASPECT WIDE 16 9 _IVASPECT w Note If there TV TYPE MULTI is a Disc COMPONENT VIDEO OUT PROGRESSIVE playing AUDIO VIDEO SYNC PROGRESSIVE _ i SQUEEZE MODE OFF in the PROGRESSIVE MODE AUTO MVP871 PIXEL CROPPING _OFF l press EXIT SETUP RETURN the SELECT AV lt 4 gt SET ENTER STOP Figure 2
5. The MP3 WMA Audio CD Formats allow the plac ing of more tracks on a CD Disc by using the technique of lossy compression applied to the original audio informa tion A special version of WMA allows for lossless verion of the original audio information The MP3 Track after compression 1s applied results in lower audio quality than the original recording The JPEG Photo File Format is used by a majority of Digital Photo Cameras on the market and the Photos are easily viewed on a variety of consumer products Some of the Kodak Picture CDs and Fujifilm Fujicolor CDs may also playback on the MVP871 The Video CDs allow for the playback of Live Video copied from devices such as Camcorders and some Digital Cameras The DivX DVDs allow for playback of movies videos downloaded via the internet and recorded onto a DVD recordable disc MP3 WMA Audio Playback The MVP871 will display the Folder Structure and Tracks from a CD Disc with MP3 format to make the song selec tion process easier To play a MP3 disc perform the follow ing steps 1 Load a MP3 WMA Disc into the MVP871 about 5 to 20 seconds later a Disc Information On screen Icon will appear on the Monitor TV indicating the Folder Tracks Organization of the Disc Refer to figures 80 and 81 2 Use the Right or Left4 Up or Downw directional Push buttons to highlight the desired Folder or Track followed by pressing the SELECT Push button If a Folder was sele
6. trol The labeling of Push buttons on some McIntosh Remote Controls and Keypads are different from the supplied MV P871 Remote Control Refer to the follow ing listing and illustrations MVP8 amp 71 Remote Control Control Center Preamp Keypad Play Play Next Next Back Back Stop Stop Review Review 0 9 0 9 Pause E 10 Review Disc Information 1 Compact Discs that are not round e g Novelty discs with octagonal or heart shapes will not play properly in the MVP871 and should not be tried as possible damage may occur 2 The MVP871 Audio Video Player is designed to play all standard CD Audio Discs that conform to the Of DIGITAL AUDIO 3 The MVP871 will play most of the following discs how ever some recorded discs may not be able to play due to the condition of the recording Super Audio CD SACD HDCD CD R CD RW Video CD Picture CD Kodak Fujicolor CD WMA Windows DVD Audio DVD Video DVD R DVD R DVD RW DVD RW and DivX 4 The MVP871 plays DivX Videos including DivX 3 4 5 and 6 as well as purchased or rented DivX Movies CD Audio Discs recorded in the MP3 Format will play back on the MVP871 except discs that contain multi session recordings 6 The CD audio side of the Dual Disc does not meet the Compact Disc Digital Audio specifications found in the industry Redbook the MVP871 may not read the CD side of a Dual Disc 7 Several of the DVD DVD Audio and SACD perfor mance features avai
7. 16 9 setting use the UpA or Down directional Push buttons followed by the SELECT Push button select the TV ASPECT Menu Refer to figures 24 and VIDEO SETUP WASPECTIUE O o J TV TYPE 4 3 LB COMPONENT VIDEO OUT WIDE 16 9 AUDIO VIDEO SYNC SQUEEZE MODE PROGRESSIVE MODE PIXEL CROPPING EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 25 4 3 PS Conventional Screen Mode with Pan and Scan Format refer to figure 25 4 3 LB Conventional Screen Mode with Letter Box Format refer to figure 26 16 9 Wide Screen Mode Format refer to figure 27 Note The title of the icon but ton bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Video Setup Menu by pressing the Up amp directional Push button 5 Next continue to the TV TYPE Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode TV Type This selects the proper video signal format to match the capabilities of the connected TV Monitor To change from the default setting of MULTI perform the following steps Notes The TV Type for use in U S and Canada is NTSC for use in parts of Europe is PAL and the MULTI Mode will automatic select the proper video signal format If the TV Monitor is displaying an image witho
8. Press STOP twice for a complete stop and return to the beginning of a disc Note With a DVD Disc Video information from the disc will be muted during the Stop Mode but will resume when the PLAY Push button is pressed and playback starts Using the Pause Push button instead of the Stop Push button will retain the video on the screen for viewing It is not advisable to keep the MVP871 in the Stop Mode one push button press for any length of time as the Laser Transport is still active PAUSE II Push button to stop playback SUPER DVD 2 Press the FF Fast Forward gt or ic REV Reverse Push button to oes activate the Rapid Frame Ad GROUP TITLE TRACK CHAP ANGLE D MIX PROG RAND TOTAL SING REM HDCD DI DIGITAL lets L PCMP PCM L c R LFe MPEG JPEG su s sr WMA MP3 HDMI 480P 576P IEEE1394 DVI 720P 1080i vance Figure 73 41 How to Operate the MVP871 con t On Screen Icon Display There are On Screen Icons available to indicate the current audio transport operating conditions and some also provide the ability to make changes to the disc currently being played These On Screen Icons are accessible by pressing the DISP TIME AUDIO or SEARCH Push button on the supplied Remote Control For each of the disc types played there is at least one On Screen Icon If there are more than one On Screen Icons for a given disc type they are ac cessed by a
9. Push button twice to return to the Digital Interface Setup 7 Next continue to the DIGIT OUTPUT Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Digital Output The defaut setting for the Coaxial and Optical Digital Au dio Outputs is to pass through the selected Dolby Digital or DTS Digital Bitstream Signals for external decoding The optional setting is for sending out a two channel PCM Digital Signal 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the Audio Setup Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button followed by the Right di 4 rectional Push button on the Remote Control to select DIGI TAL OUTPUT Refer to figure 49 AUDIO SETUP DIGI _ OUTPU NORMAL 3 Use the Right EXIT SETUP RETURN directional SELECT Nala SET ENTER Push button Figure 49 followed by the UpA or Down directional Push buttons to select PCM Then press the SELECT Push button 4 Next continue to the DOWN SAMPLING Setup Menu item If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SE
10. Control until the desired track s format title appears Multi Stereo or CD on the alphanumeric display Refer to figures 71 72 and 73 Note The MVP amp 71 remembers the layer selected SACD Multichannel SACD Stereo or CD from the last SACD Disc played The next SACD played will start with the same layer selected The Player will load the Table of Contents Number of tracks and Total Playing Time at this time To start play ing the desired format press the PLAY Push button Note Changing between the formats can be accomplished at any time by performing the above procedure How to Play a CD Disc With a disc already loaded into the MVP871 press the PLAY gt Push button on the Front Panel of the MVP871 or Remote Control Refer to figures 71 and 72 How to Pause a Disc This feature allows the temporary stopping of disc play back Refer to figures 71 72 and 73 1 When playing a Disc press the PAUSE II Push button to temporarily stop playback Note After the Pause Feature is activated with a DVD Video Disc in the MVPS amp 71 each additional press of the PAUSE II Push button will permit the video to advance one frame at a time 2 Press the PLAY gt Push button to cancel pause and resume playing the disc DVD Video Rapid Frame Advance The MVP871 allows for rapid scanning of DVD Video Frames both forward or backward directions at different speeds 1 When a disc is playing press the Note If the FF Fast Forward o
11. E poke COMPONENT VIDEO OUT P AUDIO VIDEO SYNC l the SQUEEZE MODE AUTO STOP VIDEO1 PIXEL CROPPING ze Push button EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 34 twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the PROGRESSIVE MODE Menu Refer to figure 34 3 To change from the default setting use the Right directional Push button followed by UpA or Down directional Push buttons and then press the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the PIXEL CROPPING Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Pixel Cropping A small number of TV Monitors might exhibit some horizontal instability jitter This can be removed by Pixel Cropping Circuitry in the MVP871 To activate perform the following 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Video Menu Icon Tab Refer to figure 24 Note If there e Disc VIDEO SETUP playing in the TV ASPECT TV
12. ENTER ush button Figure 63 twice before PE CNIS press OTHER SETUP ing the SETUP Push button 2 Use the Down direc tional Push button on the Remote Con Figure 64 trol to select the PLAYER ZS OTHER SETUP MODE Menu Refer to figure PLAYERMODE oh EXIT SETUP RETURN SELECT AV lt gt SET ENTER CAPTIONS VIDEO 65 WALL PAPER SCREEN SAVER 3 To change from i the default AUTO POWER MODE l setting use the EEE Right direc EXIT SETUP RETURN tional Push but PESAMA SET ENTER ton followed Figure 65 by UpA or Down directional Push buttons and then press the SELECT Push button Note The title of the icon button bar will change color exit the setup mode Captions Some DVD Discs offer On screen captions of the dialog adding enjoyment to the movie To activate the Caption feature perform the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the OTHER Setup Menu Icon Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the CAPTIONS Menu Refer to figure 66 3 To change Aa amp A A onii OTHER SETUP default setting of OFF press WALL PAPER ON the Right SCREEN SAVER i DISPLAY dire
13. JERE oe OTHER SETUP the default setting of 5 sec onds press the WALL PAPER l Right direc tional Push but AUTO POWER MODE l ton and then EE the UpA or EXIT SETUP RETURN Down direc SELECT AV lt gt SET ENTER tional Push but Figure 70 tons to select the desired time followed by the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Other Setup Menu by pressing the UpA directional Push button 5 If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode 39 How to Operate the MVP871 eee Your McIntosh MVP871 has been configured for default operating settings that will allow you to immediately enjoy superb video and high fidelity audio from a wide variety of discs If you wish to make changes to the default settings a Setup feature is provided to customize the operating settings using On Screen Menus refer to the Setup instruc tions in this manual on page 18 Most operations that can be performed with the Front Panel Push buttons can also be performed with the Remote Control Note Some of the MVPS amp 71 operating functions such as Disc Languages Video Angle or Menu Language are active only if the function is supported by data encoded on the disc
14. Push button to exit the Picture Adjustments Figure 89 Figure 90 Note The Picture Setting changes are stored in memory until new values are entered 49 Audio Specifications Number of Channels 2 and 5 1 Output Level 2 0Vrms Balanced 2 channel Output 2 0Vrms Unbalanced 2 channel Output and 5 1 Channels Output Impedance 600 ohms Balanced 2 channel Output 600 ohms Unbalanced 2 channel Output and 5 1 Chan nels Audio Frequency Response DVD Video 4Hz to 22 000Hz 48kHz Sampling Linear Audio 4Hz to 44 000Hz 96kHz Sampling Linear Audio Audio Frequency Response DVD Audio 4Hz to 88 000Hz 192kHz Sampling SACD Frequency Response 4Hz to 100 000Hz CD Frequency Response 4Hz to 20 000Hz Signal to Noise Ratio 115dB Dynamic Range 110dB Harmonic Distortion 0 002 Channel Separation Better than 110dB 1 000Hz Video Specifications Signal System NTSC PAL Region Code 1 Component Video Output Level Y Output Level 1 0Vp p 75 OHM P C Output Level 0 648Vp p 75 OHM P C Output Level 0 7Vp p 75 OHM S Video Y Output Level 1Vp p 75 OHM 50 S Video C Output Level 0 286 Vp p 75 OHM NTSC Composite Video Output Level 1Vp p 75 OHM General Specifications Digital Output Optical 15dbm to 21dbm Coaxial 0 5V p p 75 ohm Digital Signal Format Sampling Frequencies 44 1kHz 48 0kHz 96 0kHz and 192kHz Transport Laser Beam Wavelength 630nm 810nm Lase
15. Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Other Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the SCREEN SAVER Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Screen Saver When the Screen Saver Mode is active the MVP871 will display a randomly placed DVD Audio Video Icon on the screen approximately 5 minutes after the transport has been Stopped or Paused To activate the screen saver per form the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the OTHER Setup Menu Icon Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the SCREEN SAVER Menu Refer to figure 68 3 To change from the default setting press the Right directional Push button and the UpA or Down directional Push buttons to select ON followed by the SELECT Push button OTHER SETUP BLUE EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 67 38 Note The titl
16. RGB setting expands the range of the luminace picture information from black to white The Enchanced setting may provide a slightly improved image with some TV Monitors Notes The output signal format needs to be set to the RGB Mode Not all TV Monitors will support the RGB Mode To make changes using the Front Panel Selector SELECT and FORMAT Push buttons exit the SETUP Mode 3 To change from the NORMAL setting use the UpA or Down directional Push buttons followed by the SELECT Push button Refer to figure 8 Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item DIGITAL INTERFACE SETUP NORMAL HDMI AUDIO SETUP ENHANCED HDMI AUTO FORMAT EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 8 21 Digital Interface Setup con t 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the AUDIO SETUP Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Audio Setup The Audio Setup selects the number of channels and ad ditional settings of the Digital Audio Signal leaving the MVP871 through the connection 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press
17. STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the OSD LANGUAGE Menu 3 To change from the default setting use the Right directional Push button followed by UpA or Down directional Push buttons and then press the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Language Setup Menu by pressing the Left lt followed by the UpA directional Push buttons 5 Next continue to the DIGITAL INTERFACE SETUP Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode RGB Setting 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the Digital Interface Setup Tab Refer to fig ures 5 and 7 P Note If there DIGITAL INTERFACE SETUP is a Disc playing HDMI RGB SETTING NORMAL l in the HDMI AUDIO SETUP 2CH MVP87 HDMI AUTO FORMAT PANEL RES press the STOP Push EXIT SETUP RETURN buton SELECT AV lt 4 gt SET ENTER twice Figure 7 before pressing the SETUP Push button 2 Use the Down directional Push button followed by the Right directional Push button on the Remote Control The
18. TYPE MVP871 COMPONENT VIDEO OUT __ press AUDIO VIDEO SYNC the SQUEEZE MODE PROGRESSIVE MODE elas Push hon EXIT SETUP RETURN SELECT AV lt gt SET ENTER twice before Figure 35 pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the PIXEL CROPPING Menu Refer to figure 35 3 To change from the default setting use the Right directional Push button followed by Up amp or Down directional Push buttons and then press the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 29 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the AUDIO SETUP Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Audio Setup SSS SS SSS a EE SE ee The MVP871 has built in Digital Audio to Analog Audio Decoding Circuitry for the various Digital Audio Formats used on todays CD and DVD Discs These included SACD DVD Audio Dolby Digital DTS Digital MP3 WMA HDCD and DivX The Audio Channel Setup selects the number of Channels Loudspeaker Configuration and Delay Time Settings of the Analog Audio Signal leaving the MVP871 Audio Channel 1 Press the SETUP Push button on the suppli
19. The DVD Data is read into memory from the disc at twice the normal rate Likewise CD Audio Data is read into memory at four times the normal rate The fast read speeds help to insure better disc tracking and error correction processing e Video Output with Up Scaling to 1080p The MVP871 s special video processing circuitry scales the native 4801 resolution image quality of a DVD disc to 480p 720p 10801 or 1080p via the Digital Video Output e Multiple Video Outputs The Component Video Output has switchable Progressive Scan Processing and offers the highest possible analog pic ture quality available There are also S Video and Compos ite Video Outputs for a variety of applications e Advanced Video Circuitry An advanced technology 12 Bit DAC Digital Analog Con verter operating at 216MHz with Multi Directional Diago nal Filter together with Pixel Image Correction performs video signal processing for enhanced DVD picture quality e 24 BIT Burr Brown Audio DAC The MVP871 has three built in Burr Brown 2 channel Digital to Analog Converters are capable of sampling rates up to 192kHz with 24 Bits of resolution e Balanced Outputs The MVP871 has Balanced Outputs for the Left and Right Channels when playing a CD When a Multichannel Disc is playing the Balanced Left and Right Outputs provide a two channel mix down of the Multichannel Recording e Built in Dolby Digital and DTS Digital Decoders The MVP871 provides built in deco
20. press the SUBWOOFER oda Right or SW 100B orr Cedie EXIT SETUP RETURN SELECT AV lt gt SET ENTER tional Push but Figure 42 tons to select the MANUAL Selection Mode f ti CHANNEL LEVEL l or operation TESTTONE MANUAL Refer to figure FRONTLCH OT 43 CENTER og FRONTRCH Oc Note The pro SURROUND RCH 0cB_ cedure SURROUNDLCH 0cB_ SUBWOOFER oa used for AOR oF mak EXIT SETUP RETURN ing the SELECT AV lt gt SET ENTER Loud Figure 43 speaker Level Adjustments is similar for both the Manual and Automatic Modes The only difference is in the Manual Mode the selection of the Loudspeaker is performed by using the Up amp or Down direc tional Push buttons before adjustments are made 31 vite How to Set the Audio con t In the Auto SPEAKER SETUP matic CHANNEL LEVEL Mode AUTO h FRONT LCH ow CENTER od MVP871 FRONT RCH og will SURROUNDRCH oa ay SURROUNDLCH odB SUBWOOFER oa to the SW 10dB OFF Hewi EXIT SETUP RETURN SELECT AV lt 4 gt SET ENTER Loud speaker Figure 44 three seconds after user adjustments have stopped Refer to figure 44 if the Automatic Mode will be used 3 Use the Down directional Push button to select the different Loudspeakers and the Right or Left directional Push buttons to adjust the Loudspeaker Volume Level to match the volume level of the other Loudspeakers This may take several cycle
21. provides even Front Panel Illumination and is designed to ensure the pristine beauty of the MVP871 will be retained for many years Dimensions Dimensions The following dimensions can assist in determining the best location for your MV P871 There is additional in formation on the next page pertaining to installing the MV P871 into cabinets 1 7 1 2 44 45cm McIntosh l MVP871 AUDIO VIDEO PLAYER SELECT HOMIeFORMAT 3 8 O Front View of the MVP871 o l 13 69cm 15 24cm SACD CD REV Hea FF BACK NEXT STOP PLAY OPEN CLOSE STANDBY ON APEA ONE MME WL OW MAE D PNE AMD MA Se 6 pees i far E e E a E a mens i marmar ee CJ Bd ae DVD pem dts Hi E SP od HOM Bvx Moorea FT GITAL Digital Surround DIETA WDE SUPER AUDIO CD LJ a ae PAUSE 17 43 18cm 4 5 8 11 75cm UNBALANCED AUDIO OUTPUTS 5 1CH r eee T DIAITAT AUDIO SUTRUTS Dolby MLP id the double D symbol are trademarks of Dolby Lab t OPTICAL COAXIAL Dolby MLP Los the double D symbol are trademarks of Dolby Laboratories m Intosh MVP871 120V 50 60H2 60W AUDIO VIDEO PLAYER CLASS 1 ii McINTOSH LABORATORY INC LASER PRODUCT O 2 BINGHAMTON NY MADE IN USA 0 0 SERIAL F T D DHHS RULES AND 1040 11
22. sesiisasmsriicans TTT EEPE EEE AE PAE A ETEN 32 E E E a AE EA A EAA 32 Surround L Ch LO A AE E A 32 Surround R Ch O a 32 SUDWOOTET ssacisdvsccvessevenses das i a TEE E E E 32 Default oo eeeee cee OO ESE AENA 32 Digital Qut actacocteteseseeaccasend Normi eneee ae 33 Down Sampling O ecestote tat a a a 33 Source Direct wo eee OUT EAI ENTIE I EEA 33 Bass Enhancer 008 OTT IAEN IEE E A T 34 COmMmpression sacnccnsnconcandsanaects O a NEET EIEE ETR 34 Ratings Name Selection Refer to Page Ratne Leve lerinen S No LIMit essruseiieisirssnieaias 33 Password sncccuccetinestencsseaosnies C Dano E arice 35 REGIST AlIOMN lt ceacnencereasdavecss Show 42 OCC se cesacacece contanecenoesencncs 36 Other Setup Name Selection Refer to Page Player Mode sucses Aud Oseere 37 Captions 5 ciconcsatseiadiecneeaeae COTA EAE E EE EET a Wall Papel chcsnnccaccnsaientseceenes tesa acs teense ees a7 BCTCCN SAVE ccccesesssonasicetentes OT ETE E AE E E 38 Display uongee OTE ee S 38 Auto Power Mode OTE a E 38 Slide Show ou eee eee ee co 6 TAEA E eS 39 Language Setup a This is to select the Language of the Soundtrack Subtitles Disc Menus and On Screen Display OSD Dialog This selects the dialog language that will be heard when the DVD Disc is played Note The Alternate Languages of French Spanish and others may not be available on all DVD Discs 1 Press the SETUP Push button on the su
23. the MVP871 the unit will momentarily switch On and then go into the Standby Mode 2 Press the SETUP Push button on the Remote Control and the LANGUAGE SETUP Menu will appear on the Monitor TV screen Refer to figures 2 amp 3 Note There are six Main Menu Icon Tabs located at the Top of the On Screen Setup Display The Icon Tabs are named Language Setup Digital Interface Setup Video Setup Audio Setup Ratings and Other Setup Access the desired Main Menu Icon Tab by pressing the Right or Left directional Push buttons on the supplied Remote Control Then use the UpA or Down directional Push buttons followed by the SELECT Push button for the desired choice Note Some menu choices require more than one step to complete After all the desired setup adjustments are complete press the SETUP Push button to exit the Setup Mode Note Some changes made to the menu options will not occur until after the SETUP Mode has been exited Main Menu Icon Tabs LANGUAGE SETUP D o 90000 J vV gt N m a n O m Z r Y McIntosh Figure 2 EXIT SETUP RETURN SELECT AV lt gt Figure 3 SET ENTER SETUP and Default Settings Setup Mode Default Settings eee a I NO The following listings indicate the factory default settings Refer to the listed page number f
24. 00kHz setting Then press the SELECT Push button 4 Next continue to the BASS ENHANCER Setup Menu item If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Bass Enhancer The MVP871 Bass Enhancer redirects low frequency sounds to the Subwoofer when a two channel audio source or other source without Low Frequency Effects LFE is playing The Subwoofer needs to be active refer to Loud speaker Configuration on page 30 The defaut setting for Bass Enhancer is Off to activate the Bass Enhancer Direct feature perform the following 1 Press the SETUP Push button on the supplied Re mote Control to access the Figure 51 On Screen AUDIO SETUP Language AUDIO CHANNEL Setup Menu DIGITAL OUTPUT DOWN SAMPLING Then aul the SOURCE DIRECT Right direc OFF tional Push but ELMS e ton to select the gt EXIT SETUP RETURN Audio Setup SELECT AV lt gt SET ENTER Tab Note If there Figure 52 is a Disc playing in the MVP871 press the STOP Push but ton twice before pressing the SETUP Push button 2 Use the Down directional Push button followed by the Right directional Push button on the Remote Control to select BASS ENHANCER Refer to figure a2 34 3 Use the Right directional Push button followed by the UpA or Down directional Push buttons to select the ON setting Then pre
25. 13903 MADE IN USA To AC Outlet McIntosh A V Control Center OQ OO OOO OO OOOO TAPE VCR DVD C gt R BAL L SAT CD 2 PH AUX TUNER NTOSH LABORATORY IN BALANCED OUTPUTS 120V 50 60Hz 65 WATTS KEYPADS A ACC BACK SURR CENTER FRONT BACK SURR CENTER FRONT ot e O 6 OOOO6 OOOO IR POWER RS232 OFF ON ie nr Oe OOOO OOOO SUB MULTI CHANNEL AMP SUB IR INPUTS CONTHOL OUTPUTS EXTERNAL INPUTS ZONE A OUTPUTS Notes Selects the video sig nal output resolution at the HDMI Output Selects the video signal output at the HDMI Output Front Panel Displays and Push buttons IR Sensor receives commands from a Remote Control Disc Tray opens to load and unload a disc Standby Power On Indicator SACD CD Ci DVD firm dts di AUDIO VIDEO McIntosh MVP871 AUDIO VIDEQ PLAYER ic E STOP SELECT HDMI FORMAT gt gt Haa mpl REV FF BACK NEXT Digital Surround DIGITAL VIDEO n gt PAUSE PLAY QS hc Horm eva OPEN CLOSE STANRBY ON Selects the SACD Move rapidly Move forwards Stops disc Starts disc STANDBY ON or CD Audio forward through one track chapter playback playback Push button switch Layer from a a track during at a time es the MVP871 ON hybrid disc playback or OFF Standby and resets the micro processors Move rapidly Mo
26. 4 Push 8 button twice before pressing the SETUP Push but ton 2 Use the Down directional Push button on the Re mote Control to select the AU a DIO VIDEO SYNC Menu IvaspecT sd TV TYPE COMPONENT VIDEO OUT PROGRESSIVE Refer to figure 31 3 To change from the default setting use the Right direc tional Push but ton followed by SQUEEZE MODE INTERLACAD PROGRESSIVE MODE HDMI PIXEL CROPPING OTHERS EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 31 28 UpA or Down directional Push buttons to select one of two other presets Interlaced or HDMI followed by pressing the SELECT Push button If a different delay value is needed use the UpA or Down directional Push buttons to select OTHER followed by VIDEO SETUP the SELECT caspecT O TV TYPE COMPONENT VIDEO OUT Push button Use the Up or Down direc tional Push but tons to enter the offset delay value followed by the SELECT Push button Refer to figure 32 Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Video Setup Menu by pressing the Left followed by the UpA directional Push buttons 5 Next continue to the SQUEEZE MODE Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mo
27. 71 s Componet Video Output jacks is capable of displaying a Progressive Scan Signal Failure to do so could result in pos sible damage to the TV Monitor If you are not sure about the capability of the TV Moni tor connected to the MVP amp 71I Component Video Output refer to the Owner s Manual supplied with the set and or contact your McIntosh Dealer for assistance In order to switch the MVP871 Component Video Output to the Interlace Mode non Progres sive Scan the MVPS871 will first have to be connected to a TV Monitor having either Progressive Scan capability or can except either S Video or Composite Video Signals 3 To change from the default setting use the Right directional Push button followed by UpA or Down directional Push buttons and then press the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item Not all High definition TV Moni tor sets are fully compatible with the MVP8 amp 71 and may cause artifacts to be displayed in the picture In the case of Progressive Scan picture problems it is recommened to switch off the Progressive Scan feature in the MVP871 and instead use the built in Progressive Scan feature of the TV moni tor For additional information please contact your McIntosh Dealer 27 Video Setup con t 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons
28. AL AUDIO OUTPUTS OPTICAL COAXIAL UNBALANCED AUDIO OUTPUTS BALANCED prvi OUTPUTS 5 1CH HDMI OUT McIntosh mvPs71 AUDIO VIDEO PLAYER McINTOSH LABORATORY INC BINGHAMTON NY MADE IN USA SERIAL NUMBER MVP871 to the 4 connector on the McIntosh A V Control Center To provide a Video Signal for making a recording for viewing in Zone B and or a TV Monitor without either a Component Video Input and or Input then connect as fol lows 3 Optionally connect a S Video Cable from the MVP871 S VIDEO OUT jack to the DVD S Video input jack on the McIntosh A V Control Center 4 Optionally connect a Video Cable from the MVP871 VIDEO OUT jack to the DVD Video input jack on the McIntosh A V Control Center 5 Connect the MVP871 power cord to a live AC outlet Note When AC Power is initially applied to the MVP amp 71 the unit will momentarily switch On and then go into the Standby Mode 120V T 60W Em 1 Em PRODUCT COMPLIES WITH DHHS RULES 21 CFR 1040 10 AND 1040 11 CENTER SURR FRONT CE AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR OWER VIDEO SVIDEO C MPONENT VIDEO OUT PE i ki E R R R OUT P C P C SUBWOOF P 00000 Q c ZONE A REC FIXED QQ MONB MONA REC 7 MONB MONA REC HDMI VIDEO PO COO O00000 MON A COMPONENT OUTPUTS COMPONENT INPUTS DIGITAL OUTPUTS DIGITAL INPUTS McIntosh mx120 AN Feli CENTER Sica NY
29. CE 3 Use the Down EXIT SETUP RETURN Push buttons SURROUND RCH 0aB directional SESE Ale SELES SUES 1 SURROUND LCH l eKe 5 l to adjust the SUBWOOFER _0dB_ Push but Figure 18 Loudspeaker ton to select EXIT SETUP RETURN ra Volume Level iFeiisetbalgia DISTANCE Stall AlB to match the then press the SEENE volume level of Figureto Right or FEET te other Loud QSA Fomo aa i Left direc FRONTRCH 2f speakers This may take several cycles through all the tional Push but CENTER Cee SURROUND LCH 10 ft Loudspeakers to achive the desired results If one of tons to select AROUND RERA EO the Loudspeakers is quieter than the others use it as a the desired SUBWOOFER 12ft reference to match the other loudspeakers to meau Pa pet et 4 When all the Loudspeakers are at the same volume increments SELECT AV lt gt SET ENTER level press the RTRN Return Push button to stop the either Feet or Figure 19 Channel Level Adjustments and then press the RTRN Meters Refer to Push button again to return to the SPEAKER CON figure 19 FIGURATION Menu 4 Use the Down directional Push button to select FRONT LCH then use the Right or Left direc DELAY TIME ADJUSTMENTS tional Push buttons to enter in the distance of the The following Delay Time Adjustments will electronically Loudspeaker from the Listening Viewing Area Refer compensate for different Loudspeaker distances from the to figure 20 Listening Viewing Area Refe
30. E 8 E MPEG JPEG ISOISIISR Pil AB E 1 E E E E E 8 i E 8 E a H 7 oem au ua a a u a WMAMP3HDMI 480P 576P FVG E E BENNE EENEN HENEN CLLD E JEEE1394 DVI 720P 1080i Figure 77 43 How to Operate the MVP871 con t SACD and CD Disc Program Playback Mode This feature allows for the playback of Tracks of SACD and CD Discs in the desired order Refer to figure 78 Notes 1 The MVP871 must be in full STOP Mode two presses of the i STOP cS Push but ton with 2 the Disc 3 Table of Contents 6 TOC read 9 before the MY P aoran ES Playb ack Figure 78 Mode Fea ture can be activated 2 When programming Hybrid SACD Discs first choose the format Multichannel Stereo or CD so the correct TOC can be read as some discs have different selec tions 1 Press the PGM Program Push button to access the On Screen Program Mode Note It is possible to enter a Program using just the Front Panel Alphanumeric Display however the On Screen Icon Display allows viewing of the whole program at one time 2 Using the Numeric Push buttons enter the desired Track Selection for the first Program Step Note The MVP871 automatically stores into memory each of the program steps as they are entered 3 In a similar manner enter the remaining desired Tracks Note The CLEAR Push button may be used to delete a selected Program Step 4 To start playback of the just entered program press the PLAY gt Push button Note To mome
31. HDMIAUTOFORMAT of SC S MAXRES other changes ae are to be made in Setup Mode at this time exit MEZURAN by pressing the SELECT AV lt gt SET ENTER RTRN Return Figure 22 Push button Note The SETUP Push button may also be pressed to exit the setup mode 25 vite Video Setup TV Aspect This selects the proper display ratio of height and width to match the TV Monitor connected to the MVP871 To change from the default setting of Wide 16 9 perform the following steps 1 Press the SETUP Push button on the Remote Control to access the Language On Screen Setup Menu Then press the Right directional Push button to select the Video Setup Menu Icon Tab Refer to figure 23 Note If there Aa A 0 BO B LANGUAGE SETUP DIALOG ENGLISH SUBTITLE OFF PN ea ENE ENGLISH OSD LANGUAGE ENGLISH EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 23 VIDEO SETUP TV ASPECT WIDE 16 9 MUT TV TYPE MULTI COMPONENT VIDEO OUT PROGRESSIVE AUDIO VIDEO SYNC PROGRESSIVE l SQUEEZE MODE OFF PROGRESSIVE MODE AUTO PIXEL CROPPING l OFF EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 24 is a Disc playing in the MVPS871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button followed by the SELECT Push button on the Remote Control to 2 3 To change 26 from the Wide
32. Loudspeaker Size for the nol o to J Figure 13 Front Loudspeakers connected in the system Using igures 15 an the directional push buttons and the On Screen Menu 14 Aal v Haaj Ala proceed to the remaining Loudspeakers in the system 2 Use the CHANNEL LEVEL and select Large Small or None Down direc Note If the Front Loudspeakers are set to small the tional Push CENTER ow Center and Surround Loudspeaker will automati button to select ONT RCH cally switch to small with the Large Menu Setting TEST TONE SURROUND REH e fo B grayed out The Subwoofer setting is fixed to the then press the SUBWOOFER o On setting as this is required to playback DVD Au Right or ee ere dio Discs properly Left lt q direc SELECT AV lt gt SET ENTER 3 Use the Down directional Push button to select Honi P alebit TEEST CROSSOVER press the Right directional Push but iom toscedi ton followed by using the the UpA or Down direc the tional Push buttons followed by pressing the SELECT MANU Aa_ Push button to select the crossover frequency between AL Se tania o m EEVET the subwoofer and the Front Surround Loudspeakers lection _MANUAL Refer to the Owner s Manuals that came with your Modaal Ca fRonTich f oas Loudspeakers and or contact your McIntosh Dealer for op FRONTRCH oa 5 z SURROUND RCH 0 dB l assistance in determining the appropriate Crossover aration yy SURROUNDLCH oas Frequency Relerio S
33. NTOSH LABORATORY INC S BINGHAMTON NY 13903 MADE IN USA REETA MONB MONA REC FN F L COMPONENT OUTPUTS COMPONENT INPUTS Ie VO i k W nes DIGITAL DO NOT OPEN i I OUTPUTS DIGITAL INPUTS D 7 E x PR px a o SurpuTs OOO Q AUX Pt 420V 50 60Hz 65 WATTS A ACC BACK SURR CENTER FRONT BACK SURR CENTER FRONT oe GO OOQO OOOO POWER RS232 D A Q O Q OQO Q000 B VIDEO SUB MWLTI CHANNEL AMP SUB POWER ZONE B IR INPUTS CONTROL f OUTPUTS EXTERNAL INPUTS ZONE A OUTPUTS vite How to Connect Video and AC Power How to Connect Video and AC Power ea a a a a a a a 1 Connect component video cables between the MVP871 and the McIntosh A V Control Center as follows Note The MVPS amp 71 s default setting for the Component Video Output Signal is Progressive Scan Before connecting AC Power to the MVP871 please refer to the Setup Section entitled Component Video Out on page 27 of this Owner s Manual for im portant information A Connect a cable from the MVP871 Y OUTPUT to the Component Video Input of the McIntosh A V Control Center B Connect a cable from the MVP871 P C OUTPUT to the P Component Video Input of the McIntosh A V Control Center C Connect a cable from the MVP871 P C OUTPUT to the P Component Video Input of the McIntosh A V Control Center 2 Connect a cable from the OUT connector on the DIGIT
34. Push button Refer to figure 10 The last setting MULTIchannel LPCM will decode the Digital Audio Signal from the disc and will re encode it into a digital PCM Audio Signal It will also allow ad justments for Speaker Configuration Channel Level and Delay Time The circuitry in the MVP871 queries the Inputs of all the components connected looking for the number of channels The number of channels displayed On Screen and their possible adjustments are determined by the re sults of the query 4 To change from 2CHannel setting to the MULTIchan nel LPCM use the Up amp or Down directional Push buttons followed by the TTA m A SELECT Push HDMI SPEAKER SETUP button Refer to SPEAKER CONFIGURATION figure 10 CHANNEL LEVEL l 5 The HDMI DELAY TIME i Speaker Setup Menu will now appear On R fi EXIT SETUP RETURN Screen erer SELECT AV lt gt SET ENTER to figure 11 l Notes The Figure 11 title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item The following steps for Multichannel Loud speaker Adjustments Speaker Configuration Channel Level and Delay Time are also the same for a 2 Channel Loudspeaker System If the query detected a 2 Channel Audio component connected only the Front Left and Right Menus items will be adjustable LOUDSPEAKER SIZE CONFIGURATION In the steps below the size of the Loudspeakers will be entered into setup The LA
35. Push button and the Marker On Screen Icon will appear Refer to figure 76 2 Press the SELECT Push button to enter the first start ingloca tion The iy highlighted dot on the left side will ty change toa 144 number 1 3 Press the Right di Me et Figure 76 How to Operate the MVP871 con t rectional Push buttons to highlight the second dot from SACD or CD Repeat the end of the left side Press the SELECT Push button This allows repeating a SACD CD Track or the Disc on a to enter the second starting location continuous basis Refer to figure 77 4 Enter a third starting point if desired Up to eight 1 Start playing the disc or the part of the disc you desire Markers can be stored in memory to have repeated Note If you wish to erase a MARKER use the Left4 2 Press the RPT Repeat Push button once to activate or Right directional Push buttons to select the the Track Repeat 1 press the RPT Push button twice desired Marker and press the CLEAR push button to activate the Disc Repeat All Refer to the On To start playback from a desired Marker Location perform the following steps Screen Text 3 To cancel the previously selected Repeat Mode press 1 Press the MRKR Marker Push button to select the the RPT Repeat Push button until the On Screen Marker On Screen Icon if not already displayed On Text message indicates REPEAT Off or the word Screen REPEAT in the lower right hand corn
36. Push button to Melntosh MVP871 AUDIO VIDEO PLAYER O a gt e lt Haa gt j SACD CD REV FF BACK NEXT V O U O QO DVD d COMPACT Ac ISG AUDIO VIDEO und DIGITAL VIDEO a i STOP PAUSE Figure 83 O m n m 4 e pej oO m a D x 3 000 0000 GD 0000 cy i 4 w gt OQ A PLAY NEXT STOP u gt Cc wn m a L O ep m ag JI m lt ag o mu j e000 lollo O 6 McIntosh S Z Figure 84 gt PLAY OPEN CLOSE STANDBY ON 3 O O O 47 vite MVP871 Video Settings and Adjustments con t access the F w Memory e SA ie STD Mi M2 M3 M4 M5 ay i a j RS eh y 1 Picture Adjust 1 Settings Refer to figure 86 3 Press the Downw directional Push but ton to activate Contrast Setting use the Up4 or Downw al directional Push but tons to adjust the Contrast from a setting of 6 to 6 4 Press the Right directional Push button to select the Picture Brightness Setting Use the Up4 or Downw Figure 86 directional Push buttons to adjust the Brightness from a setting of 0 to 12 5 Press the Right directional Push button to select the Picture Sharpness Mid which effects the range of medium freq
37. RD ASEI0 dD EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 57 at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to 2 Use the is a Disc A A BB LANGUAGE SETUP playing in the DIALOG ENGLISH MVP 87 1 SUBTITLE OFF DISC MENUS ENGLISH press OSD LANGUAGE ENGLISH the STOP Push button EXIT SETUP RETURN SELECT AV lt 4 gt SET ENTER twice before Figure 54 press ing the _Aa A 4 RATINGS SETUP Push RATING LEVEL 8 NO LIMIT ution PASSWORD _ _ REGISTRATION Down direc tional Push button on the Remote Con trol to select EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 55 the RATING LEVEL Menu 1 RATINGS Y figure O LOCK ALL RATING LEVEL f l 3 Select the PAsswoRD de decd rating REGISTRATION 3 l level of 3 by using the UpA wt Down EXIT SETUP RETURN aciwt directional SELECT aV4 gt SET ENTER Push buttons Heme 56 followed by the SELECT Push button exit the setup mode Password The Password of 0000 used in the previous Rating Level example or any other previously entered password may be changed at any time To change the current password perform the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Ratings Menu Icon T
38. RGB Red Blue and Green RGB Video Signal PC Res Computer RGB Video Signal at 60Hz The HDMI FORMAT Push Button allows the selection of different video signal resolutions Video Signal Available Resolutions hoe Oe Om 480 5761 480 576p 720p 10801 1080p and AUTO RGB 480 5761 480 576p 720p 10801 1080p and AUTO PC Res VGA XGA WXGA SXGA Always refer to the TV Monitor Owner s Manual for information on the correct video signal format and resolu tion when setting the MVP871 HDMI Output as this will provide the best possible image quality In the event the in formation is not available set the MVP871 HDMI Format to AUTO MVP871 Video Settings and Adjustments Note When the MVP871 HDMI Output is ac tive the video signal at the Component Video Output will au tomatically switch to the Interlaced Mode even though the word Progressive is illu minated on the Front Panel Information Display Video Adjustments A MVP871 option allows the adjustment of various video parameters not un like the adjustments on a TV Monitor These custom adjustments can be stored into one of five memory locations To enter custom settings perform the follow ing steps 1 Press the PIC ADJ Pic ture Adjustment Push button to access the On Screen Icon Refer to figure 84 and figure 85 on the next page 2 Press the Right directional Push but ton to select the M1 Memory Location followed by pressing the SELECT
39. RGE Setting refers to the Loudspeaker capability for reproducing bass frequencies down to 35Hz within 3dB of the midrange frequencies If a Loudspeaker can not reproduce bass frequencies down to SETUP con t 35Hz within 3dB of the midrange frequencies it is consid the Listening Viewing Area either by listening or with a ered SMALL sound pressure meter Level adjustments are made in small 1 Use the UpA or Down directional Push button to se steps 1dB by using the MVP871 Remote Control Up or lect SPEAKER CONFIGURATION followed by press Down directional Push buttons The level can be adjust ing the SELECT Push button on the Remote Control ed over a 10dB range Refer to figures 11 and 12 Note Before performing the Loudspeaker Level adjust 2 Press the ments you must first have completed the Loudspeak Down direc Aa er Size adjustments tional Push piel a SPEAKER CONFIGURATION _ ise the Downy 5 button and FRONTS fo directional Aal E Halaj Ala thenpressthe F _CENTERSP__ smat Push button to P _SUBWOOFER SPEAKER CONFIGURATION Right direc SURROUND SP select CHAN CHANNEL LEVEL tional Push but Rossore NEL LEVEL DELAY TIME ton followed followed by by the Up amp EXIT SETUP RETURN pressing the or Down SELECT AY lt gt SET ENTER SELECT Push directional Figure 12 button on the EXIT SETUP RETURN Push button Remote Con SELECT AY lt 4 gt SET ENTER to select Large or Small
40. TH 4 FEET ON BOTTOM COVER IMPORTANT PLASTIC lt Read Above FOOT 4 ee 10 32 x 3 4 SCREW WITH WASHER 4 I BOTTOM PAD INSIDE CARTON Quantity l 4 Part Number 033838 033837 033836 033725 034301 017937 400159 404080 Description Shipping carton only End cap Inside carton only Top pad Bottom pad Plastic foot 10 32 x 3 4 screw 10 7 16 Flat washer END CAPS INSIDE CARTON SHIPPING CARTON 51l McIntosh Laboratory Inc 2 Chambers Street Binghamton NY 13903 The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice Printed in the U S A McIntosh Part No 04101801
41. TS Music Discs The defaut setting for Source Direct is Off When actived the Loudspeaker Configuation Settings previously made are overriden The Front and Surround Loudspeakers are configured as Large with the Subwoofer set to On The High Frequency response is extended to 50kHz or 100kHz depending on the choice made To acti vate the Source Direct feature perform the following Note If the Front and Surround Loudspeakers in your system are considered small refer to additional infor mation on page 30 Loudspeaker Size Configuration do not activate Source Direct as distortion and or SET ENTER Figure 50 damage could occur 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the Audio Setup Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button a2 How to Set the Audio con t a 2 Use the Down directional Push button followed by the Right directional Push button on the Remote Control to select SOURCE imram DIRECT Refer AUDIO CHANNEL to figure 51 DIGITAL OUTPUT l 3 Use the Right DOWN SAMPLING SOURCE DIRECT directional BASS ENHANCER Er Push button COMPRESSION 100KHz followed by the UpA or EXIT SETUP RETURN SET ENTER SELECT AV lt gt Down direc tional Push but tons to select either the 50kHz or 1
42. TUP Push button may be also pressed to exit the setup mode Down Sampling The defaut setting for Down Sampling is Off When a non copyrighted DVD disc without protection is played the MVP871 will pass through the 192kHz or 176 4kHz signal If the DVD disc is copyright protected those signals would not become available however the MVP871 will down sample the signal to 48kHz To activate the down sampling feature select On for Down Sampling 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the Audio Setup Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button followed by the Right directional Push button on the Remote Control to select DOWN SAMPLING Refer to figure 50 EXIT SETUP RETURN 3 Use the Right EZMA directional Push button followed by the UpA or Down directional Push but tons to select ON Then press the SELECT Push but ton 4 Next continue to the SOURCE DIRECT Setup Menu item If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Source Direct The MVP871 Source Direct Feature when active repro duces the full range of sound when playing SACD and D
43. UBWOOFER _ oaB 4 Press the RTRN Return Push button to return to the figure EXIT SETUP RETURN SPEAKER CONFIGURATION Menu 15 SELECT AV lt gt SET ENTER Figure 15 CHANNEL LEVEL ADJUSTMENTS A properly setup Home Theater Surround Sound System Note The procedure used for making the Loudspeaker should have all Loudspeaker levels adjusted to the same Level Adjustments is similar for both the Manual starting reference volume level in the Listening Viewing and Automatic Modes The only difference is in Area The MVP871 includes a built in test signal genera the Manual Mode the selection of the Loudspeaker tor which can have its output switched into each Loud is performed by using the Up amp amp or Down direc tional Push buttons before adjustments are made speaker manually or automatically The desired test signal P y y 8 In the Automatic Mode the MVP871 will switch volume levels of each Loudspeaker can be determined in 23 vite Digital Interface Setup con t to the next Loudspeaker three seconds after user DELAY TIME adjustments have stopped Refer to figure 16 if the followed by Aa LIA aj Automatic Mode will be used pressing the 3 Use the Down directional Push button to select SELECT Push _SPEAKER CONFIGURATION _CHANNELLEVEL the different button on the Louspeakers HDMI SPEAKER SETUP Remote Con and the Right TEATE O trol Refer to or Left FRONTLCH oc figure 18 directional
44. URN SELECT AV lt 4 gt SET ENTER cursor color Figure 33 to blue indicating the selected item 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the PROGRESSIVE MODE Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Progressive Mode When the Component Video Output Analog Video is connected to the TV Monitor and the Progessive Mode is set to Auto default setting the MVP871 will produce the best possible picture quality The two additional Modes of Progressive Scan Videol and Video2 allow for manual override when the Progressive Scan Circuits can not detemine whether the video signal is film or video based Videol setting will look best with Video Source material and Video2 will look best with Film Source material For additional important information on using the Component Video Outputs and the Progressive Scan Mode refer to Component Video on page 27 To switch Off the Proges sive Scan Mode perform the following 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Video Menu Icon Tab Refer to figure 24 Note If there is a Disc playing VIDEO SETUP in the TV ASPECT MVP87 1 wre o oS S i
45. ab Refer to figure 55 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the PASSWORD Menu Refer to figure 58 3 Use the Right gt IZERESsITAREDE e 5 RATINGS directional Push button RATING LEVEL followed by the PASSO O SELECT Push button Then enter using the Numeric Push buttons on the Remote Control the current password 0000 followed by the SELECT Push but ton Refer to figure 59 on the next page EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 58 33 How to Set the Ratings 4 Again using the NUMERIC Push buttons on the Re mote Control enter the new password to Aa amp fA 4 RATINGS ENTER A 4 DIGIT PASSWORD NEW PASSWORD E confirm it Then Pene the EXIT SETUP RETURN SELECT Push SELECT AY 4 gt SET ENTER button Refer to i l Figure 59 figure 60 5 Press the SE O LECT Push MECE INAEDE button 6 Return to the ENTER A 4 DIGIT PASSWORD Ratings Menu CONFIRM PASSWORD by pressing the Up A direction al Push button 7 Next continue EXIT SETUP RETURN to the REG SELECT AV lt gt SET ENTER ISTRATION Figure 60 Menu If no other changes are to be made in Setup Mode at this time exit by pressing the Down directional Push button to select the EXIT SETUP menu choice fol lowed by th
46. aying Press the SEARCH Push button on the Remote Control until the Chapter On Screen Icon appears then use the NUMERIC Push buttons to select the desired Chapter DVD Audio Direct Track Selection The MVP871 Front Panel Display indicates the Disc Track currently playing Use the Remote Control NUMERIC Push button s to enter the desired Track Number Note The desired disc Tracks may also be selected by using the On Screen Icon Press the SEARCH Push button on the Remote Control and then NUMERIC Push buttons DVD Audio Group Track Selection To select a desired Group from a DVD Audio Disc on the MVP871 press the DISP TIME Push button to access the On Screen Icon Press the Right or Left lt directional Push buttons to highlight either the Group or Track On Screen Icon Use the Remote Control NUMERIC Push button s to enter the desired Track Number followed by the SELECT Push button SACD and CD Direct Track Selection The MVP871 Front Panel Display indicates the Disc Track currently playing Use the Remote Control NUMERIC Push button s to enter the desired Track Number Note The desired disc Tracks may also be selected by using the On Screen Icon Press the SEARCH Push button on the Remote Control and then NUMERIC Push buttons How to Set and Activate Markers This feature allows establishing up to eight different start ing places on a disc where playback can start other than at the beginning of the disc 1 Press the MRKR Marker
47. ccscaversamncseravaccs Bp AAE TEE 24 De ai einna D EAE E T E eee 24 HDMI Auto Format Panel ROS isoscc ten scanonssncastensavetessenas ZS Video Setup Name Selection Refer to Page TV ASDC ves seessensiacinvnsseitcors Wide CIGD ccinessonacescoonisonnivsnndeonss 26 TV Ty Pe icetsstedecsareetencdestssess ILM citec EEE 26 Component Video Out PFORTESSIVE sai00222c0esdenddeteesdeesdaseds 21 Audio Video Sync PLOSTESSIVE sa5sceeeicinacdsosdecesdavestaes 28 Squeeze Mode OLE E T 28 Progressive Mode PAULO ez sc pcasty sis aessndadendcketeedinsaaseseees 29 Pixel Cropping ooooo0anenn OD eoe E EE 29 Audio Setup Name Selection Refer to Page Audio Channel Multi channel eee 30 AUDIO SPEAKER CONFIGURATION SETTINGS Speaker Size Name Selection Refer to Page OI erae WAT 2 E E EO 30 C ea e a EEE E E E 30 Subwoofer stundeisnscsasarentesias BY PTEE ETE E 30 SUrround reiini E T a EIEE T T 30 THOS SOY Cl pairon BTA EE A A A 30 Speaker Level Name Initial Level Refer to Page Front L Cl oosscossriciioentntcinness al E PEE E EAE eee ed 31 C eN OCS EEPE PEE EE 31 Front CM scaccteaccuconanasonees AN E E ese eee E E E 31 Surround R Ch OCS SEEE EEE 31 Surround L Ch OU E P AAE 31 SUD WOOLCT sccccscasastcntacesnacsas OC PAPE EA AE 31 SWF sincan E eer aie enses 32 Speaker Delay Time Name Delay Time Refer to Page Front LC Wi ssccsancsssenocsansiateat TZUN AEE E NE 32 Front R CH
48. consid ered SMALL 1 Use the UpA or Down directional Push button to se lect SPEAKER CONFIGURATION followed by press ing the SELECT Push button on the Remote Control Refer to figure 39 2 Press the the Down directional Push button and then press the Right directional Push button followed by the UpA or Down directional Push button to select Large or Small Loudspeaker Size for the Front Loud speakers connected in the system Using the direction al push buttons and the On Screen Menu proceed to the remaining Loudspeakers in the system and select Large Small or None Refer to figure 40 Note If the Front Aa HDMI SPEAKER SETUP Loud SPEAKER CONFIGURATION speak LARGE pune CENTERSP SMALL SUBWOOFER set to SURROUND SP small CROSSOVER the Center and Se EXIT SETUP RETURN SELECT AV lt 4 gt SET ENTER round Loud Figure 40 speaker will automatically switch to small and the Sub woofer setting is fixed to the On setting as this is required to playback DVD Audio Discs properly 3 Use the Down directional Push button to select CROSSOVER then press the Right directional Push button Using the UpA or Down directional Push buttons followed by pressing SELECT to make a change from the default setting of 80Hz This sets the crossover frequency between the subwoofer and the Front Surround Loudspeakers Refer to the Owner s Manuals that came with your Loudspeakers and or contact your McInt
49. cted use the direc tional push buttons to select the desired Track within FOLDER 1 C FOLDER 2 Figure 80 the folder then push the SROOT FOLDER 1 SELECT Push EE R MP3_11 A MP3_02 button The A MP3 03 selected Track A MP3_04 A MP3 _05 will now start A MP3 06 playing R MP3_07 a Note The gt see A MP3_09 Column MEEI on the left side Figure 81 of the Disc Information On screen Icon indicates any folders on the Disc The right side column indi cates Tracks located in the open Folder The basic transport functions such as Next Back Fast For ward Reverse Stop Pause Play and Random Playback continue to function as normal The Next and Back Push buttons will select Tracks within the current folder To play Tracks in other Folders use the direction push buttons to select the desired folder first JPEG Photo CDs The MVP871 will display the Folder Structure and Photos from a CD Disc with JPEG file format To view a JPEG Photo disc perform the following steps 1 Load a JPEG Disc into the MV P871 about 5 to 20 seconds later a Disc Information On screen Icon will appear on the Monitor TV indicating the Folder Photo Organization of the Disc 2 Use the Right or Left lt Up4 or Down directional Push buttons to highlight the desired Folder or Photo followed by the pressing the SELECT Push button Ifa Folder was selected use the directional push buttons to select the desired Photo with
50. ction Push button to move backward forward up or down through an on screen menu Select Press the SELECT Push button to confirm and activate a setup option or options indicated by the on screen icons Note The SELECT push button is also referred to as Re turn when working within the Setup Mode Top Menu When a disc is loaded in the player press the TOP MENU Push button to access the main DVD Title menu disc dependent Display Time Press the DISPlay TIME Push button to access vari ous disc times text information on SACD CD and audio modes displayed on screen disc dependent Audio Press the AUDIO Push button to access various audio modes displayed on screen disc dependent REV and FF Press a REV Reverse or FF Fast Forward gt gt Push but ton to start moving rapidly through a chapter or track on a disc Note Audio level is automatically muted during this operat ing mode with a DVD disc A B Repeat Press the A B Repeat Push button once to establish the starting point of the repeat loop and press the A B Repeat Push button a second time for the ending point and that segment of a disc to be repeated continuously 17 How to Operate the Setup Mode _ SS SS Your McIntosh MVP871 has been factory configured for default operating settings that will allow you to immedi ately enjoy superb video and high fidelity audio from a DVD Video It also reproduces DVD Audio SACDs and CDs with u
51. ctional AUTO POWER MODE Push button SLIDESHOW and the UpA or MEIRAU Doon direc SELECT AV lt D gt SET ENTER tional Push but Figure 66 tons to select ON followed by the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Other Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the WALL PAPER Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Wall Paper When the MVP871 is in the Stop Mode there is uniform video background To change from the default color of blue perform the following steps 1 Press the SETUP Push button on the supplied Remote 37 How to Set the Other Setup Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the OTHER Setup Menu Icon Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the WALL PAPER Menu Refer to figure 67 3 To change from the default setting press the Right directional Push button and the Up or Down directional Push buttons to select the desired color followed by the SELECT
52. cts the video signal format available at the Com ponent Video Jacks to match the capabilities of the con nected TV Monitor To change from the default setting of Progressive perform the following steps Note The Progressive Scan Circuitry in the MVPS amp 71 of fers the highest possible analog video picture quality available when the Component Video Outputs of the MVP871 are connected to a TV Monitor capable of Progressive Scan Unlike a conventional TV with Odd and Even Scanning Lines that are interlaced together to form a picture the Progressive Scanning Mode scans all the lines of picture information both Odd and Even at one time non interlaced 1 Press the SETUP Push button on the Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Video Setup Menu Icon Tab Refer to figure 24 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the COMPONENT VIDEO OUT Menu Refer to figure 30 VIDEO SETUP TV ASPECT TV TYPE PROGRESSIVE AUDIO VIDEO SYNC INTERLACED SQUEEZE MODE PROGRESSIVE MODE PIXEL CROPPING EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 30 CAUTION DO NOT use the MVP8 amp 71 DVD Player s Progressive Video Display Mode unless you are certain the TV Monitor connected to the MVP8
53. dditional presses of the DISP TIME Push but ton Refer to figures 74 and 75 Once the On Screen Icon ap pears changes iia Ties to items such as NASS ee the Track Play gf i his ing the Chapter TN loc ee Playing the Bs i a Group Playing the Elapsed Time into the disc or the Audio Mode etc may be accomplished The highlighted item or another item can be selected by using the DIREC TIONAL SELECT AND NUMERIC Push buttons on the Remote Control After the desired changes have jas been made the gt last press of the DISP TIME AUDIO or SEARCH Push button will switch off the On Screen Icon CHAPTER 71 28 LLS 01 15 TITLE ELAPSED 0 08 42 Figure 74 AUDIO 1 4 y ud efi k A EER es Ky x j ni eh ia 2 BBs Y i IN dy x if iif P r ia a i E f gt i i me AY a bias F x i N LaS TRS TNN i f aki LA S i Er 4 PS Figure 75 DVD Video Direct Title Selection The MVP871 Front Panel Display indicates the Disc Title currently playing Use the Remote Control NUMERIC Push button s to enter the desired Title Number Note The desired disc Title may also be selected by using the Search Function Press the SEARCH Push button on the Remote Control until the Title On Screen Icon appears then use the NUMERIC Push buttons to select the desired Title 42 DVD Video Direct Chapter Selection The MVP871 Front Panel Display indicates the Disc Chapter currently pl
54. de Squeeze Mode When the MVP871 is connected to a TV Monitor with ei ther a Component Video or HDMI connection and the TV Aspect Ratio is set to 16 9 and a video source with an As pect Radio of 4 3 is displayed the image will be stretched out The Squeeze Mode will compensate by displaying the 4 3 image in the center of the screen The default setting is Off with additional choices of On or Auto To change from the default setting perform the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Video Menu Icon Tab Refer to figure 24 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the SQUEEZE MODE Menu Refer to figure 33 3 To change from the default setting use the Right directional Push button followed by UpA or Down directional Push buttons and then press the SELECT Push button AUDIO VIDEO SYNC PROGRESSIVE SQUEEZE MODE INTERLACAD PROGRESSIVE MODE HDMI EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 32 SETUP con t Note The title of the VIDEO SETUP icon button TV ASPECT bar will RALHS COMPONENT VIDEO OUT change AUDIO VIDEO SYNC color OFF PROGRESSIVE MODE ON from PIXEL CROPPING AUTO yellow the EXIT SETUP RET
55. ding of Dolby Digital and DTS Digital Sound Tracks e Digital Audio Outputs There are Coaxial Optical and Digital Audio Outputs for external decoding of Dolby Digital DTS Digital Signals PCM or MP3 Signals from CDs e On Screen Setup and Calibration Level and Time Delay Adjustments are available for Dolby Digital DTS Digital DVD Audio and SACD Disc Signals and effect the multichannel analog audio outputs e Power Control The Power Control Input connection provides convenient Turn On Off of the MVP871 when connected to a McIn tosh System with Power Control e Remote Control The Remote Control with illuminated push buttons pro vides control of the MVP871 operating functions A Data Port Connection to a McIntosh A V Control Center or Preamplifier allows for convenient system operation using one Remote Control An External IR Sensor Input allows for remote operation when the MVP871 is located behind closed doors e Special Power Supply A fully regulated Power Supply with a special R Core Power Transformer ensures stable noise free operation even though the power line varies e Machined Side Panels The sides of the MVP871 are machined from thick alumi num panels with a smooth black finish e Fiber Optic Solid State Front Panel Illumination The Illumination of the Glass Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and extra long life Light Emitting Diodes LEDs This
56. e of the icon button bar will change color from yellow the EXIT SETUP RETURN SELECT AV lt gt S A o A OTHER SETUP SET ENTER cursor color to blue indicating the selected item 4 Return to the Other Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the DISPLAY Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Figure 68 Display The Display On Off feature is not used in the MVP871 1 Next continue to the AUTO POWER MODE Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Auto Power Mode The MVP871 has a feature to switch itself Off 30 minutes after a disc has stopped playing the stop mode To acti vate the Auto Power Mode feature perform the following Steps 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the OTHER Setup Menu Icon Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Remote Control to select the AUTO POWER MODE Menu R
57. e SELECT Push button and the MVP871 will return to normal operation Note The SETUP Push button may be also pressed to exit the setup mode Registration The eight digit Registration Code is used when leasing or purchasing DivX Video On Demand VOD format files for additional information use the Internet and go to http www divx com vod To view the Registration Code perform the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Ratings Menu Icon Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the REGISTRATION Menu with the eight digit code Refer to figures 61 and 62 3 Return to the Ratings Menu by pressing the UpA directional Push button 36 4 Next continue to the OTHER SETUP Menu If no other changes are to be made in Setup Mode at this time exit by pressing the Down direc tional Push but ton to select the EXIT SETUP menu choice followed by the SELECT Push button and the MVP871 will return to nor mal operation Note The SETUP Push button Aa A 4 RATINGS RATING LEVEL PASSWORD REGISTRATION ll EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 61 RESISTRATION CODE DivX V
58. e the Down directional Push button on the Re mote Control to select the SUBTITLE Menu Refer to figure 6 20 3 To change from the default set ting use the Right directional Push button followed by UpA or Down directional Push buttons and then press the SELECT Push button Note The title of the icon but ton bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Language Setup Menu by pressing the Left followed by the Up direc tional Push buttons 5 Next continue to the DISC MENU Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to ac exit the setup mode os amp _ HDMI FMT D x mej gt Cc N m 6 Disc Menus This selects the language of the menus that will be seen on the TV Monitor Note The Alternate Languages of French and Spanish MeIntosh Figure 5 may not be available on all DVD Discs ISNA i Pressthe RE LANGUAGE SETUP UP Push button Ee OFF on the supplied DISC MENUS ENGLISH Remote Con OSD LANGUAGE FRENCH SPANISH trol to access the Language JAPANESE OTHERS Setup Menu EXIT SETUP RETURN SET ENTER SELECT AV lt gt Refer to figures 4 and 5 2 Use the Down direc tional Push butt
59. ed Re mote Control to access the On Screen Language Setup Menu Then press the Aa A 4 B LANGUAGE SETUP Right direc tional Push but ton to select the Audio Setup Tab Refer to figures 5 on page 20 36 and 37 DIALOG ENGLISH SUBTITLE OFF DISC MENUS ENGLISH OSD LANGUAGE ENGLISH EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 36 AUDIO SETUP AUDIO CHANNEL MULTI CHANNEL DIGITAL OUTPUT DOWN SAMPLING EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 37 Notes If there is a Disc playing in the MVP87I press the STOP Push button twice before pressing the SETUP Push button When the HDMI MULTI LPCM Mode has been selected this AUDIO CHANNEL Setup is not active 2 Use the Down directional Push button followed by the Right directional Push button on the Remote 30 Control to select Audio Setup Refer to M fia figure 38 o NNN MUCHANNEL MULTICHAN jee NEL is the default SOURCE DIRECT EEANN BASS ENHANCER COMPRESSION menu selection and has adjustments for Speaker Configura tion Channel Level and Delay Time used after decoding Multichannel Digital Audio Signals into 5 1 Analog Audio Channels The 2CH VSS OFF setting passes thru a two channel digital audio signal or two channel digital audio signal down mixed from a multichannel disc with no additional audio signal processing The 2CH VSSI ON and the 2CH VSS2 ON setti
60. efer to figure 69 3 To change from the default setting of OFF use the UpA or Down directional Push buttons to select ON followed by the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to green indicating the selected item 4 Return to the Other Setup Menu by pressing the UpA directional Push button SETUP con t 5 Next continue to the SLIDE Aa amp fA 6 SHOW S OTHER SETUP et tings If PLAYERMODE al aia CAPTIONS l other changes WALL PAPER l SCREEN SAVER are to be made i in Setup Mode AUTO POWERMODE J at this time exit C Oar e a by pressing the EXIT SETUP RETURN RTRN Return SELECT AY lt 4 gt SET ENTER Push button Figure 69 Note The SETUP Push button may be also pressed to exit the setup mode Slide Show The MVP871 has a feature to view photos from a disc and the interval time between photos is adjustable from 5 to 15 seconds To change the interval time perform the following steps 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the OTHER Setup Menu Icon Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the SLIDE SHOW Menu Refer to figure 70 3 To change from
61. er of the Front 2 Using the Left lt or Right directional Push buttons to Panel Alphanumeric Display is extinguished select the desired Marker Starting Location then press the SELECT Push button Disc A B Repeat 3 Press the MRKR Marker Push button to exit the This feature allows the repeating of a specific disc segment Marker On Screen Icon on a continuous basis Refer to figure 77 1 Start playing the part of the disc you desire to have DVD Video Repeat repeated This allows repeating a DVD Chapter or the Title the en 2 Press the A B Push button once to enter the A starting tire movie on a continuous basis Refer to figure 77 point and press the same push button a second time B 1 Start playing the disc or the part of the disc you desire ending point Refer to the On Screen Text to have repeated 3 To cancel A B REPEAT function press the A B 2 Press the RPT Repeat Push button once to activate Push button once again The On Screen Text message the Chapter Repeat 1 press the RPT Push button indicates A to BCANCELED twice to activate the Title Repeat All Refer to the On Screen Text Message Random Playback 3 To cancel the previously selected Repeat Mode press This feature allows for listening to Tracks of a SACD or the RPT Repeat Push button until the On Screen CD Disc in a Random Order It also allows for the play Text Message indicates REPEAT Off or the word back of Tracks in a Group on a DVD Audio Disc
62. et user defined video settings Use to switch power On Access any numbered and Off to the MVP871 operating function To access Track Numbers on CDs and DVD Audio Discs Use to Clear the last greater than 10 programmed track Use to view on screen the current title chapter group or track number along with direct access to change it using the number push buttons Press to select between various On screen pag es of information on DVD Audio Discs Return to the previous setup menu screen Use to view and or change the on screen subtitle language Use to view or change the current Audio Selection Use to move the on screen cursor up down left right also use to select the highlighted on screen menu item Access the on screen Top Menu from the disc disc dependent Access the on screen Disc Menu from a DVD disc a a ears Use to select various disc information including time It is displayed on screen and on the Front Panel Alphanu meric display Use to quick stop full stop or pause the disc playback Also use to activate the Still Image Video Mode Move forward or backward through a disc chapter or track also use to set the Still Video Image step rate Starts Playback of a disc and allows moving forward or back ward one chapter at a time on a DVD Video or one track at a time on DVD Audio SACD and CD Discs Use to preselect program from an audio disc the desired tracks for p
63. hambers Street Binghamton New York 13903 Phone 607 723 3515 Fax 607 723 1917 Copyright 2007 by McIntosh Laboratory Inc Table of Contents salety INSIrOCONS ne ee eer 2 Thank You and Please Take a Moment ccceeeec eee eee 4 Technical Assistance and Customer Service 088 4 Table of Contents ccccccecccceeccceseccccesscccssccccussccesacesenanecs 4 General TM POLIMAUION srecna eee iiri aaa 5 Disc Inl ormatiON eactacceic ssc secs ate ctinat base cnedeaSoosincwnddadedesaee 6 Connector and Cable Information cc cece cceeeecce eee es 6 MO CUO ooo sessed eE E NAE TENS 7 Perlormance POAC ESS encreire nn ennea iiai I Dimensions so stice ee eecstteecctstysntsnaatecccetutanesGenseeactenssectneeecesetence 8 BAAS CAN ONG scrclos cnerrerstered ge adeseteau cise scuthacehetenctenenewersestccteaeteeieen 9 Connections Rear Panel Connections eieiencndossctesceesesiadnascschestaciesaneesetes 10 How to Connect Control Analog and Digital Audio 11 How to Connect Video and AC Power c ceeeeeeeeeeeees 12 Front Panel Features Front Panel Indicators and Push buttons 14 Front Panel Information Display ccccccccccccccceeeeeeee 15 Remote Control Remote Control Push buttons ccccccccccccceeeseeesestneees 16 How to Operate by Remote Control ccc cceeee 17 Setup How to Operate the Setup Mode uu ccccccceeeeeeeee 18 Der SEM noS a
64. he nearest foot or tenth of a meter Use the Down directional Push button to select DELAY TIME followed by pressing the SPEAKER SETUP SELECT Push _SPEAKER CONFIGURATION button on the CHANNEL LEVEL Remote Con trol Refer to figure 46 EXIT SETUP RETURN directional SELECT AV lt 4 gt SET ENTER Push button to select DIS TANCE then press the Right or Left directional Push buttons to select the desired measurement increments either Feet or Meters Refer to figure 47 Figure 46 DELAYTIME 4 Use the Down DELAY TIME DISTANCE directional FRONTLCH_ 12t Push button to _FRONTRCH 2ft CENTER 12 ft select FRONT SURROUNDLCH 10ft SURROUND RCH __10ft LCH then use SUBWOOFER 12 the Right or DEFAULT on Left direc oe ae SET ENTER tional Push but tons to enter in the distance of the Loudspeak er from the Lis aa DELAY TIME tening Viewing DISTANCE FEET 12 gt Area Refer to ON Rl figure 48 CENTER nrt Nore To qiesel SURROUNDLCH 10 SURROUND RCH __10ft _ all the SUBWOOFER 12t Loud DEFAULT o peaker EXIT SETUP RETURN SELECT AY lt gt SET ENTER Delay Time Figure 48 settings to the default settings first select DEFAULT menu choice and then press the SELECT Push button 5 Enter in the distances for the remaining Loudspeakers 32 SETUP con t 6 When all the Loudspeaker distances are entered press the RTRN Return
65. i i CENTER SURR ee a en Rear View of the MVP871 Q00 GE OOO 4 SUBWOOF HOCD High Digital are either trademark tered duct is Trademark 308 574 1341 4 33 65cm 15 7 8 40 32cm 14 1 2 36 83cm 6 Side View of the MVP871 3 16 4 13 16 12 22cm 0 48cm 13 16 _ O O 2 06cm 10 1 2 1 15 16 5 08cm 26 67cm 4 92cm p j Installation Installation The MVP871 can be placed upright on a table or shelf standing on its four feet It also can be custom installed in a piece of furniture or cabinet of your choice The four feet may be removed from the bottom of the MVP871 when it is custom installed as outlined below The four feet togeth er with the mounting screws should be retained for pos sible future use if the MVP871 is removed from the custom installation and used free standing The required panel cutout ventilation cutout and unit dimensions are shown Always provide adequate ventilation for your MVP871 Cool operation ensures the longest possible operating life for any electronic instrument Do not install the block the ventilation holes on the top and bottom cover Allow 1 inch 2 54 cm in front of the mounting panel for clearance When the DVD CD tray is opened the panel clearance required in front of moun
66. ideo On Demand Your registration code is E To learn more visit www divx com vod EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 62 may be also pressed to exit the setup mode SETUP con t How to Set the Other Setup Player Mode Some DVD Audio Discs offer additional different play back features such as viewing photo gallery song lyrics and or videos Depending on the disc some of features may only be available when the MVP871 Player Mode is set to the Video Mode To change from the default setting of Audio Player Mode to Video Player Mode perform the following steps from yellow the cursor color to blue indicating the selected item 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the CAPTIONS Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the OTHER Setup Menu Icon Tab Refer to figures 63 and 64 Aa fA amp B N Ifth LANGUAGE SETUP ote ere isa Disc WPL NEN laws SUBTITLE OFF Pic ins DISC MENUS ENGLISH in the OSD LANGUAGE ENGLISH MVPS amp 7I1 press the STOP EXIT SETUP RETURN Puen SELECT AV lt gt SET
67. in ran REPEAT in the lower right hand corner of the Front dom order Refer to figure 77 Panel Alphanumeric Display is extinguished Note The MVP871 must be in STOP Mode with the Disc Loaded Table of Contents read first before the Ran DVD Audio Repeat dom Playback Mode Feature can be activated 1 After the Table of Contents has been read with the This allows repeating a DVD Track or the Group a selec tion of tracks on a continuous basis Refer to figure 77 1 Start playing the disc or the part of the disc you desire 4 i to have repeated 2 Press the PLAY gt Push button to start Random Play 2 Press the RPT Repeat Push button once to activate back after all the tracks have been played the MV P871 the Track Repeat 1 press the RPT Push button twice will stop oo to activate the Group Repeat All Refer to the On 3 To cancel the Random Playback function first press the STOP Push button twice followed by RANDOM Push button transport in the full stop mode press the Stop Push button Twice press the RANDOM Push button Screen Text Message 3 To cancel the previously selected Repeat Mode press the RPT Repeat Push button until the On Screen Text Message gyperovp group TME TRACK CHAP ANGLE DINIX PROG RAND TOTAL SNG REM HDD DIGITAL tas indicates REPEAT Off AUDIO VCD E E ELLI EENEN HENNE LLLE E L PCMP PCM LLC RILFE E E E E E E E 48
68. in the folder then push the SELECT Push button The selected Photo will appear now Notes The column on the left side of the Disc Informa tion On screen Icon indicates any folders on the Disc The right side column indicates Photos located in the open Folder The basic transport functions such as Next Back Stop Pause and Play continue to function as normal The Next and Back Push buttons will select Photos within the current folder To view Photos in other Folders use the direction push buttons to select the desired folder first Kodak is a trademark of Eastman Kodak Company Fujifilm and Fujicolor are trademarks of the Fuji Company 45 How to Operate the MVP871 con t Video CDs To start playback of the Video CD Disc perform the fol lowing steps 1 Load a Video CD Disc into the MVP871 about 5 to 20 seconds later a Disc Menu On screen Icon will appear on the Monitor TV indicating the available choices for playback 2 Use the Right or Left Up4 or Downw directional Push buttons to highlight the desired Video followed by pressing the SELECT Push button The selected Video will start playing Notes The basic transport functions such as Fast For ward Reverse Stop Pause and Play continue to function as normal DivX DVD Discs To start playback of the DivX Video Disc perform the fol lowing steps 1 Load a Video CD Disc into the MVP871 about 5 to 20 46 seconds later a Disc Menu On sc
69. irectional Wa a Push but h fee TERR A ton to select the Moving Pictures Experts Group MPEG Noise Reduction NR Level Setting Use the Up4 or Down w directional Push buttons to reduce noise of the contours arround letter charcters and other similar objects present in the image the setting is ON or OFF 14 Press the Right directional Push button to select the Setup Level Use the Up4 or Down directional Push buttons to adjust intensity of the Color Black in the image the setting is OIRE or 7 5IRE 15 Press the Right directional Push button to select the Image s Horizontal Position on the screen Use the Up4 directional Push button to shift the image to the right or use Down w directional Push buttons to shift the image to the left range of adjustment is 7 to 7 Note The Horizontal Position adjustment is active for the Component Video Outputs with the Progressive Scan Mode active and HDMI Outputs 16 Press the Right directional Push button to select the Image s Vertical Position on the screen Use the Up4 directional Push button to shift the image up or use Downw directional Push buttons to shift the image down range of adjustment is 7 to 7 Note The Vertical Position adjustment is active for the Component Video Outputs with the Progressive Scan Mode active and HDMI Outputs To exit the Memory 1 Adjust 3 Mode press the SELECT Push button To make additional video adjustments use the Right directional Push b
70. l Cable from the MVP871 DIGITAL AUDIO COAXIAL OUTPUT to the DVD Coaxial DIGITAL INPUT of a McIntosh A V Control Center Note An optional connecting method is to use an optical cable from the MVP871 DIGITAL AUDIO OPTI CAL OUTPUT to the Optical Digital Input of a McIntosh A V Control Center eS DIGITAL AUDIO OUTPUTS UNBALANCED AUDIO OUTPUTS 5 1CH HDMI OUT McIntosh A V Control Center A OPTICAL COAXIAL Me nto 5 h MVP871 120V 0 eow AUDIO VIDEO PLAYER ASS McINTOSH LABORATORY INC aaa BINGHAMTON NY MADE IN USA SERIAL BALANCED AUDIO OUTPUTS NUMBER CMDS WITH DHHS RULES CENTER SURR FRONT L R i l L L L OOO AZ POWER 566 16 QTE SS oe feces E oe o O00000 c OO OX a 4 Connect Audio Cables from the MVP871 UNBAL ANCED 2CH AUDIO OUTPUTS to the DVD Inputs on a McIntosh A V Control Center 5 Optionally connect Audio Cables from the MVP871 BALANCED 2CH AUDIO OUTPUTS to the Zone A Balanced 1 Inputs on a McIntosh A V Control Center 6 Connect Audio Cables from the MVP871 UNBAL ANCED 5 1CH AUDIO OUTPUTS all six channels to the External AUDIO INPUTS on a McIntosh A V Control Center 1 CFR 1040 10 AND 1040 1 PTET E3 E3 3 FKeD oe MON A OUT HDMI IES 5 MONB MONA REC TAPE VCR DVD TV SAT CD 2 PH AUX TUNE al c N lor Yor cIntosh w MX120 4 A V CONTROL CENTER R Ol McI
71. l playing time will be indicated on the Front Panel Alphanu meric Display Press the PLAY Push button for playback of a CD Note Ifa CD is placed in the tray and the PLAY Push button is pressed instead of the OPEN CLOSE Push button the tray will close and the disc will start 000 0000 OD 0000o CHD 0000 E o 8 S e GS m E 33 rt lt x T 3 0000 HORO 000 Audio Disc is first started the Disc s On Screen Menu will usually appear allowing for the choice of selections and various Audio Video Playback Parameters McIntosh Figure 72 McIntosh MVP871 AUDIO VIDEQ PLAYER SELECT HDMI FORMAT lt Haa ppl SACD CD REV BACK NEXT Figure 71 40 Co a in gt STOP PAUSE PLAY OPEN CLOSE STANDBY ON 3 O O O O SZ HDMI How to Operate the MVP871 How to Play a SACD Disc With a disc already loaded into the MVP871 press the PLAY gt Push button on the Front Panel of the MVP871 or Remote Control The Disc will start playing the first selec tion of the SACD Layer this could be either the Multi channel Tracks or 2 Channel Tracks depending on the disc contents To change from the default Multichannel Tracks to either SACD 2 Channel or CD Tracks press the SACD CD Push button on the Front Panel or Remote
72. lable on the MVP871 are active only if the Disc includes the supporting encoded information DVD Video Discs are designed to only play in certain region s of the world A region may be a single country or a group of countries Usually on the back cover of the DVD Video Disc container is a Globe Symbol with Number s or the word All inside it The MVP871 is designed to play discs for Regions 1 and All 9 Certain Dolby Digital and DTS Encoded Discs display their own unique Audio Mode Selection menu every time the disc is loaded into the player If you do not make a choice from this menu the disc will revert to its default Audio Mode when play is started GN CoO Disc Information Connector and Cable Information Connector and Cable Information XLR Connectors Below is the Pin configuration for the XLR Balanced Output Connectors on the MVP871 Refer to the diagram for connection PIN 1 Shield Ground PIN 2 Output PIN 3 Output Power Control Connector The MVP871 Power Control Input Output Jacks receive send Power On Off Signals when con nected to other McIntosh Components sald a A 1 8 inch stereo mini phone plug is N C used for connection to the Power Con trol Input Output on the MVP871 Note The Data ad Power Control Connecting Cable is avail able from the McIntosh Parts Department Data and Power Control Cable Part No 170 202 Six foot shielded 2 conductor with 1 8 inch stereo mini ph
73. lash with arrowhead The exclamation point within an within an equilateral triangle is equilateral triangle is intended to intended to alert the user to the h Ov VGREOIN 1 alert the user to the presence of im presence of uninsulated danger RISK OF ELECTRIC SHOCK portant operating and maintenance ous voltage within the product s DO NOT OPEN servicing instructions in the litera enclosure that may be of sufficient ture accompanying the appliance magnitude to constitute a risk of electric shock to persons AVI S RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR WARNING TO REDUCE RISK OF NO USER SERVICEABLE PARTS FIRE OR ELECTRICAL SHOCK DO INSIDE REFER SERVICING TO NOT EXPOSE THIS EQUIPMENT TO QUALIFIED PERSONNEL RAIN OR MOISTU RE To prevent the risk of electric shock do not remove cover or back No user serviceable parts inside CAUTION CLASS 3R INVISIBLE LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS AVOID DIRECT EYE EXPOSURE CAUTION invisible Laser Radiation when open DO NOT stare into the beam or view directly with optical instruments Use of controls or adjustments or performance of proce dures other than those specified in the Owners Manual may result in Hazardous Radiation Exposure ws LUOKAN 1 LASERLAITE SOE KLASS 1 LASER APPARAT CLASS 1 LASER PRODUCT VAROITUS Laitteen kayttaminen muulla kuin tassa kaytt
74. layback Press for random playback of tracks from Video and Audio CDs Press to enlargen the video image from the disc Use to review the preselected tracks from the disc on the Front Panel Alphanumeric display while in the program mode Selects the SACD or CD Audio Layer from a hybrid disc Use to mark up to five starting points on a disc Selects the video sig Selects the video signal output nal output at the HDMI resolution at the HDMI Output Output Select a different picture Angle Use to select one of Use to set a starting and ending time segment various repeat modes on a disc for continuous repeat play Note Push buttons whose function is not identified above are for use with other McIntosh Components How to use the Remote Control How to use the Remote Control The Remote Control is capable of performing both basic Operating Functions and Setup Options for the MVP871 Disc Player Notes Refer to the How to Operate and How to Operate Setup Mode Sections of this manual for additional information using this Remote Control Play With a disc loaded press the PLAY gt push button to start the disc playing Stop Press the STOP Push button once to stop disc playback Press PLAY and the disc will start playing again from the disc time where Stop was pressed Press STOP twice for a complete stop and return to the beginning of a disc Numbered Push buttons Press through 9 t
75. log audio to connect to Balanced Inputs of other com ponents Rear Panel Connections Y OUTPUT connects to the Y Component Input of the TV Monitor or other video component P C OUTPUT connects to the P C Component Input of the TV Monitor or other video component P C OUTPUT connects to the P C Component Input of the TV Monitor or other video component Connect the MV P871 power cord to a live AC outlet Refer to informa tion on the back panel of your MVP871 to deter mine the correct voltage for your unit 120V 50 60Hz 60W CLASS 1 LASER PRODUCT COMPLIES WITH DHHS RULES 21 CFR 1040 10 AND 1040 11 AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR RS 232C RS 232C connector for connection to a remote control device IR INput for connecting an IR Receiver POWER IR DATA CONTROL IN IN OUT IN olo oX DATA IN receives op erating data from a MclIn tosh Control Center POWER CONTROL IN receives turn on signals from a McIntosh compo nent and POWER CON TROL OUT sends turn on signals on to another McIntosh Component How to Connect Control Analog and Digital Audio How to Connect Control Analog and Digital Audio 1 Connect a Power Control Cable from the MVP871 POWER CONTROL IN to the POWER CONTROL ACC Output jack of a McIntosh A V Control Center 2 Connect a Data Cable from the MVP871 DATA IN jack to the DVD DATA jack on the McIntosh A V Control Center Connect a Coaxia
76. ngs pass thru a two channel digital audio signal or two chan nel digital audio signal down mixed from a multichannel disc with the addition Synthesized Surround Sound Signal Processing To perform the MultiChannel adjustments press the Right directional Push button followed by the SELECT Push button then proceed to step 4 To change from the default setting of MultiChannel to one of the 2CH modes perform step 3 3 Use the UpA or Down directional Push buttons to select the desired 2CH followed by the SELECT Push button then proceed to step 7 on page 33 4 The Speaker EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 38 Setup Menu l SPEAKER SETUP will now z appear On CHANNEL LEVEL Screen Refer DELAY TIME to figure 39 Notes If the Source Dir eci EXIT SETUP RETURN Audio SELECT AV lt 4 gt SET ENTER Setup Fi a igure Menu 5 Option is set to 50kHz or 100kHz the Speaker Configuration is not active The title of the icon button bar will change color from yellow the cur sor color to blue indicating the selected item LOUDSPEAKER SIZE CONFIGURATION In the steps below the size of the Loudspeakers will be entered into setup The LARGE Setting refers to the SETUP con t Loudspeaker capability for reproducing bass frequencies down to 35Hz within 3dB of the midrange frequencies If a Loudspeaker can not reproduce bass frequencies down to 35Hz within 3dB of the midrange frequencies it is
77. nparalleled sonic purity If you wish to make changes to the factory default settings a Setup feature is provided to customize the operating settings using the On Screen Display OSD Menus The On Screen Menuing System 1s interactive and the ability to change a given setting or whether some menus appear 1s dependent on the operational state of the player and the choices made in other menu items If a disc is play ing in the MVP871 and the STOP Push button is pressed once the disc playback is paused some but not all menu items are available for change To make all of the menu items available for possible change the playback of the disc must be stopped which requires two presses of the STOP Push button Notes The MVP871 must be connected to a MONI TOR TV either through an A V Control Center or directly for setup and use The Remote Control supplied with the McIntosh MVP871 has several Push buttons that are labeled differently than as indicated on the On Screen Menu please refer to the following Setup Instructions in this Owner s Manual for the correct Push button 1 The Red LED above the STANDBY ON switch lights to indicate the MVP871 is in Standby mode To Switch ON the MVP871 press the STANDBY ON 7 Push button PLAY OPEN CLOSE STANDBY ON on the Front Panel or on the Remote Con AX trol either the 7 Homi PWR Power or POWER ON TY Push button Refer to figures 1 and 2 Note When AC Power is initially applied to
78. ntarily stop playback press either the Pause Il Push button or the STOP Push but ton once To resume Program Playback press the PLAY Push button 5 To cancel the Program Playback Mode press the STOP Push button twice followed by pressing the PGM Program Push button DVD Audio Disc Program Playback Mode This feature allows for the playback of pre selected Groups and or Tracks of a DVD Audio Disc in the desired order Refer to figure 79 Notes 1 The MVP871 must be in full STOP Mode two presses of the STOP Push button with the Disc Table of 44 Contents DVD AUDIO PROGRAM TOC SELECT GROUP GROUP TRACK read GROUP 1 1 before the GROUP 2 2 p GROUP 3 3 FOGTAM GROUP 4 4 Playback GROUP 5 5 Mode Fea a ture can be 8 activated 3 10 2 If a DVD T PRESS PLAY TO START CLEAR ALL Audio disce N an d igure has both formats DVD Audio and DVD Music Video only the DVD Audio Groups Tracks are programmable 1 Press the PGM Program Push button to access the On Screen Program Mode 2 Use the the UpA or Down directional Push buttons to select the first desired Group followed by the SE LECT Push button Use the the UpA or Down direc tional Push buttons to select the first desired Track of the previous selected Group Note The MVP871 automatically stores into memory each of the program steps as they are entered 3 In a similar manner add any additional Groups Tracks Note To remove a given Grou
79. o directly access one of the first nine Disc Tracks Chapters using the On screen Icon For track numbers greater than 10 press the 10 Push button first and then the required number For example to access Disc Track Chapter 23 press 10 twice and then 3 Clear Press the CLEAR Push button to erase a selected track or incorrect setting Pause Press the PAUSE II Push button to temporarily stop disc playback at any time When a DVD 1s playing each ad ditional time the Pause Push button 1s pressed the player will proceed to the next Still Video Image Note The Still Video Image step rate may be changed by us ing the REV Reverse or FF Fast Forward gt gt Push button Back and Next Press the NEXT Push button to move forward or the BACK Push button to move backward one chapter track at a time on the disc Return Press the RTRN Return Push button to return to the previous setup menu Setup Press the SETUP Push button to access the Initial Setup Menu Subtitle Press the SUBTITLE Push button to access the Subtitle menu and the Subtitle icon will appear at the top of the screen Marker While a disc is playing use the MRKR Marker Push button to establish in memory up to five different starting points on a disc where you wish play to start Angle If the DVD being played supports the Angle Feature press the ANGLE Push button to select the desired video picture angle Four Direction Arrows Press an Arrow dire
80. olution that all incom ing video signals are converted to The MVP871 allows for both manual and automatic selection of video resolution The default setting PANEL RES will output the Digital Video signal at the native resolution of the TV Monitor The MAX RES will set the video output resolution to the maximum resolution the TV Monitor process When the Front Panel Format is set to Y Ce C AUTO the circuitry inside the MVP871 will automatically select the appropriate resolution 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push but ton to select the Digital Interface Setup Tab Refer to figures 5 on page 20 and 21 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push Aa button DIGITAL INTERFACE SETUP 2 Use the HDMIRGB SETTING NORMAL Down direc HDMI AUDIO SETUP 2CH HDMIAUTOFORMAT PANELRES tional Push button on the Remote Control to select HDMI EXIT SETUP RETURN Auto Format SELECT AV lt gt SET ENTER Refer to figure 22 3 Use the Right directional Push button followed by the Up or Down directional Push buttons to select MAX RES Then press the SELECT Push button 4 Next continue to the Video Aa DIGITAL INTERFACE SETUP Figure 21 Setup Menu HDMI RGB SETTING item starting on HDMI AUDIO SETUP page 26 If no
81. on on the Remote Control to select the DISC MENU item 3 To change from the default setting use the Right directional Push button followed by UpA or Down directional Push buttons and then press the SELECT Push button Figure 6 SETUP con t Digital Interface Setup Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item This selects the various options when the MVP871 is con nected to the TV Monitor either directly or thru a McIn tosh A V Control Center using the connection 4 Return to the Language Setup Menu by pressing the Left lt followed by the UpA directional Push buttons 5 Next continue to the OSD LANGUAGE Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode OSD Language This selects the language of the on screen menus that will be seen on the TV Monitor To change from English to another language perform the following steps Note The Alternate Languages of French and Spanish may not be available on all DVD Discs when viewing their menus 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the OSD Setup Menu Icon Tab Refer to figures 4 and 5 Note If there is a Disc playing in the MVP871 press the
82. one plugs on each end Ground Data P Data and IR Input Port Connectors Sanal The MVP871 Data In Port receives Re NIG mote Control Signals A 1 8 inch stereo Data mini phone plug is used for connection Ground The IR Ports also use a 1 8 inch stereo mini phone plug and allow the connec IR Data tion of other brand IR Receivers to the C MVP871 Ground RS232 DB9 Connector Pin Layout l N C 6 N C RS232 Connector 2 Data Out TXD 7 N C i I P 3 Data In RXD 8 N C ol ao JO 4 N C Q N C Pin 9 Pin 6 5 Gnd Introduction and Performance Features Introduction i a S The McIntosh MVP871 Audio Video Player offers the latest in audio video technology providing state of the art reproduction of digital video and audio program sources A full complement of performance features allows for the enjoyment of DVDs SACD DVD Audio Audio CDs special audio and special video formats are all reproduced with flawless realism The advanced mechanical design of the transport ensures many years of smooth trouble free operation Performance Features e Twin Laser Pickup The MVP871 incorporates two laser elements with differ ent wavelengths that are focused through one lens as sembly This unique design allows reading many different types of Audio and Video Disc Formats e Advanced Transport The MVP871 has a new vibration resistant Transport with an advanced digital servo for faster quieter and accurate operation
83. oohjeessa mainitulla tavalla saattaa altistaa kayttajan dQ D turvallisuusluokan 1 ylittavalle O es r h nakymattomalle lasersateiiylle VARNING Om apparaten anvands pa annat satt an i denna bruksanvisning specifi cerats kan anvandaren utsattas for osynbg laserstraining som overskrider gransen for laserklass 1 This product incorporates an embedded m CLASS 3R Laser IEC60825 1 T 00O o SIH MN B WN ee 10 11 12 13 IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radia tors heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A ground ing type plug has two blades and a third ground ing prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician f
84. or replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience re ceptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when mov ing the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time A D 14 15 16 17 18 Refer all servicing to qualified service person nel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the appara tus has been exposed to rain or moisture does not operate normally or has been dropped Do not expose this equipment to dripping or splashing and ensure that no objects filled with liq uids such as vases are placed on the equipment To completely disconnect this equipment from the a c mains disconnect the power supply cord plug from the a c receptacle The mains plug of the power supply cord shall remain readily operable Do not expose batteries to excessive heat such as sunshine fire or the like Thank You Your decision to own this McIntosh MVP871 Audio Video Player
85. or instructions on how to change a default setting MAIN SETTINGS FOR Language Setup Name Selection Refer to Page DANO scconnecunstgartateuieracsetedees English cantoatecussseascansecatcetieseestasses 20 SUDU E eain Oa E TA A E 20 DISC MGI sscncrcnoidecteressace FAG FIG TA E 20 OSD Language FIRS FIG Ul E E nena 21 Digital Interface Setup Name Selection Refer to Page HDMI RGB Setting NOrmal usorem 21 HDMI Audio Setup DOT a tees deettcos pe SPEAKER CONFIGURATION SETTINGS Speaker Size Name Selection Refer to Page FOIE ies cane sannnsesessaenn neces NPAT e E E E E sean 29 STILE PEE EEN a SG T 23 Subwoofer Sp 00000000000 N29 T EE TET 23 Surround Sp ccccceceeees Large ees eeortoseneennidetecentanects 23 CTOSSOVET siccnsiscensunossbonvsseons CU a CE musactannsaeas ian 23 Speaker Level Name Initial Level Refer to Page Front L CMe odes osccscaesscataseeni Us ener nee erence eee 23 COMET scteestensictacacsdrdessrdeces VTS E TE A E 23 Front RC Misiossieinrari Ael o PO E 23 Surround R Ch VED aineenaan 23 Surround L Cfa Eal e E E E N 23 Speaker Delay Time Name Delay Time Refer to Page Front LC Musmos IE eee nee rer een reteset eer 24 Front R Ci ccsesasecansccesn ces 4 a eee eee ee eee one ee 24 CINE casesne ep ietetuaeeect E eee ne ene A ete ee 24 Surround L Ch POU oerien enni a 24 Surround R Ch 0 TOE eea E 24 DUD WOOL sec
86. osh Dealer for assistance in deter mining the appropriate Crossover Frequency 4 Press the RTRN Return Push button to return to the SPEAKER CONFIGURATION Menu CHANNEL LEVEL ADJUSTMENTS A properly setup Home Theater Surround Sound System should have all Loudspeaker levels adjusted to the same starting reference volume level in the Listening Viewing Area The MVP871 includes a built in test signal genera tor which can have its output switched into each Loud speaker manually or automatically The desired test signal volume levels of each Loudspeaker can be determined in the Listening Viewing Area either by listening or with a sound pressure meter Level adjustments are made in small steps 1dB by using the MVP871 Remote Control Up or Down directional Push buttons The level can be adjust ed over a 10dB range Note Before performing the Loudspeaker Level adjust ments you must first have completed the Loudspeak er Size adjustments 1 Use the Down directional Push button to SPEAKER SETUP select CHAN SPEAKER CONFIGURATION NEL LEVEL _CHANNELLEVEL _DELAYTIME followed by pressing the SELECT Push button on the EXIT SETUP RETURN Remote Con SELECT AV lt gt SET ENTER trol Refer to figures 41 and 42 Figure 41 2 Use the SPEAKER SETUP Downy drec CHANNEL LEVEL OFF tional Push FRONTLCH o CENTER oa button to select ee E TEST TONE SURROUNDRCH oa SURROUNDLCH 0dB then
87. p Track Program Step use the Right Push button followed by the Up or Down directional Push buttons to select the Pro gram Step to be removed Then press the CLEAR Push button to delete it 4 To start playback of the just entered program press the PLAY gt Push button Note To momentarily stop playback press either the Pause Il Push button or the STOP Push but ton once To resume Program Playback press the PLAY Push button 5 To cancel the Program Playback Mode press the STOP Push button twice followed by pressing the PGM Program Push button Reset of Microprocessors In the unlikely event the controls of the MVP871 stop functioning the microprocessors can be reset by perform ing the following 1 Press and hold in the STANDBY ON Push button until the STANDBY ON LED is no longer illumi nated Then release the STANDBY ON Push but ton Note This can be performed with the MVP871 On or in the Standby Mode 2 The MVP871 will automatically switch On and normal operation will resume How to Operate the MVP871 con t MP3 WMA Audio CD JPEG Photo CDs Video CD and DivX DVD Playback The MVP871 has the ability of playing back special types of disc formats that are created primarily on a computer The ability to successfully playback these discs on the MVP871 Player is dependent upon using the correct hard ware and software Please refer to the maker of the com puter and software publisher to insure proper results
88. pplied Remote Control to access the Language Setup Menu Refer to figures 4 and 5 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the Dialog Menu 3 To change d from the Aa amp A lB LANGUAGE SETUP default set ting use the DIALOG _ ENGLISH Right direc tional Push OSDLANGUAGE ENGLISH button fol lowed by UpA or Down EXIT SETUP RETURN directional SELECT AV gt SET ENTER Push buttons and then press the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Language Setup Menu by pressing the Left lt followed by the Up directional Push buttons 5 Next continue to the SUBTITLE Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Figure 4 Subtitle This selects the language that will be seen on the TV Mon itor when a DVD Disc is played and the Subtitle Mode is active Note The Alternate Languages of French Spanish and others may not be available on all DVD Discs 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Refer to figures 4 and 5 2 Us
89. r Power CLASS I Power Requirements 100 Volts 50 60Hz at 60 watts 110 Volts 50 60Hz at 60 watts 120 Volts 50 60Hz at 60 watts 220 Volts 50 60Hz at 60 watts 230 Volts 50 60Hz at 60 watts 240 Volts 50 60Hz at 60 watts Note Refer to the rear panel of the MVP871 for the correct voltage Overall Dimensions Width is 17 1 2 inches 44 45cm Height is 6 inches 15 24cm Depth is 15 7 8 inches 40 32cm Note When the Disc Tray is opened the panel clearance required in front of mounting panel is 6 3 4 inches 17 2cm Weight 27 5 pounds 12 5Kg net 43 9 pounds 20 0Kg in ship ping carton Shipping Carton Dimensions Width is 26 1 2 inches 67 3cm Depth is 24 1 4 inches 62 2cm Height is 11 3 4 inches 29 9cm Packing Instructions Packing Instructions In the event it is necessary to repack the equipment for shipment the equipment must be packed exactly as shown below It is very important that the four plastic feet are at tached to the bottom of the equipment This will ensure the proper equipment location on the bottom pad Failure to do this will result in shipping damage Use the original shipping carton and interior parts only if they are all in good serviceable condition If a shipping carton or any of the interior part s are needed please call or write Customer Service Department of McIntosh Laboratory Refer to page 4 Please see the Part List for the correct part numbers TOP PAD UNIT WI
90. r REV Reverse Push button is pressed several times the speed of the Frame Advance will increase An On Screen Icon will appear during the Rapid Frame Advance Mode indicating the advance speed 3 To cancel the Rapid Frame Advance Feature press the PLAY gt Push button Back Track Chapter Advance back to the beginning of the Track Chapter currently playing by momentarily pressing the BACK M4 Push button on the MVP871 Repeated momentary presses of the BACK M4 Push button will allow for rapid selection of the desired previous Tracks Chapters Next Track Chapter For each momentary press of the NEXT gt Push button the MVP871 will advance to the next Track Chapter Repeated momentary presses of the NEXT Push button will allow for rapid selection of the desired Track Chapter Fast Forward or Reverse Press and release the FF Fast Forward gt or REV Re verse Push button to search back and forth rapidly through a Track Chapter on a disc at 2 times normal speed An On Screen Icon will appear on the screen and the audio will be muted If the FF Fast Forward or REV Re verse Push button is pressed and released several times the speed will increase to a maximum of 5 times normal speed To return to normal playback press the PLAY gt Push button Stop Mode Press the STOP push button once to stop disc playback Press PLAY gt and the disc will start playing again from the disc time where Stop was pressed
91. r to figure 17 Delay Time is Note To reset LA 4 fl HDMI SPEAKER SETUP measured in feet or all the DELAY TIME Th l Loud DEIANA FEET meters he delays 2 a ES can be adjusted wer FRONTRCH 2t O man ee ar feet in one foot hs SURROUNDRCH 10 increments for each a SUBWOOFER S MM2 to the DEFAULT on Loudspeaker default EXIT SETUP RETURN Note Before cine SELECT AV lt gt SET ENTER perform first Figure 20 ing the l n De lay Distances between Speakers select oo ak lacaiterenineniccina Arsa E deals choice and then press the SE l ush button ust t Figure 17 A adie 5 Enter in the distances for the remaining Loudspeakers aia hen all the Loudspeaker di d first have completed the Loudspeaker Size and Level 6 When all the Loudspeaker ADEE MEENET prees adjustments the RTRN Return Push button twice to return to the 1 Measure the distances of the Loudspeakers used in the Digital Interface Setup Home Theater System from the Listening Viewing 7 Next continue to the HDMI AUTO FORMAT Settings Area to each Loudspeaker to within the nearest foot or If no other changes are to be made in Setup Mode at ee ae this time exit by pressing the RTRN Return Push 2 Use the Down directional Push button to select button 24 SETUP con t Note The SETUP Push button may also be pressed to exit the setup mode Auto Format TV Monitors with Fixed Pixel Display such as DLP LCD LiCos and Plasma all have native res
92. ranks you at the very top among discriminating music listeners You now have The Best The McIntosh dedication to Quality is assurance that you will receive many years of visual and musical enjoyment from this unit Please take a short time to read the information in this manual We want you to be as familiar as possible with all the features and functions of your new McIntosh Please Take A Moment The serial number purchase date and McIntosh Dealer name are important to you for possible insurance claim or future service The spaces below have been provided for you to record that information Serial Number Purchase Date Dealer Name Technical Assistance If at any time you have questions about your McIntosh product contact your McIntosh Dealer who is familiar with your McIntosh equipment and any other brands that may be part of your system If you or your Dealer wish additional help concerning a suspected problem you can receive technical assistance for all McIntosh products at McIntosh Laboratory Inc 2 Chambers Street Binghamton New York 13903 Phone 607 723 1545 Fax 607 724 0549 Customer Service SS St If it is determined that your McIntosh product is in need of repair you can return it to your Dealer You can also return it to the McIntosh Laboratory Service Department For assistance on factory repair return procedure contact the McIntosh Service Department at McIntosh Laboratory Inc 2 C
93. reen Icon will appear on the Monitor TV indicating the available choices for playback Refer to figure 82 Use the Right or Left Up SROOT FOLDER 1 or Downw R Divx_01 directional R Paan Ky DivX_03 Push buttons A Divx_04 Il Divx_05 to highlight the pee desired Video A Divx_07 Il DivX_08 followed by ae pressing the Bi Divx_10 SELECT Push button The Figure 82 selected Video will start playing Notes The basic transport functions such as Fast For ward Reverse Stop Pause and Play continue to function as normal How to Operate the MVP871 con t MVP871 Video Settings and Adjustments HDMI Settings The MVP871 HDMI Digital Video Settings allow for matching the requirements of a wide variety of TV Moni tor types in use today These include CRT DLP LCD and Plasma TV Monitors each with different Aspect Ratios and native resolutions For TV Monitors with Digital Video Input s the MVP871 HDMI Video Output Signal will provide the best possible image quality The HDMI SELECT and HDMI FORMAT Push buttons on the Front Panel of the MVP871 or the HDMI SEL INTRO and HDMI FMT INPUT Push buttons on the Remote Control allow for matching the exact Digital Video requirements Refer to figures 83 and 84 The HDMI SELECT Push button switches the HDMI Video Signal On and Off and allows the selection of differ ent types of video signals Video Signal Description pa Car em Component Format Video Signal
94. rrr A TAE 19 NAO ASS SED assise s 20 Digital Interface SeNi acces sicedecacacensaceansatienavestecatacansctates 21 NY SO Candace sate cae ge ge ENE 26 ANO TSC GU eer T 30 Pe US I T EE E E I E 35 RT 6 UD eraran E AES 37 Operation How 10 DOG Al astan Eara EE 40 Video Settings and Adjustments ccccccccccccccceeeeeeeees 47 Additional Information SPECIE AN ON eii een E ree 50 PPC TS IC UoN spennan a an AARE 51 General Information and Disc Information General Information E 1 For additional connection information refer to the McIntosh Remote Controls for A V Control Centers and Pream owner s manual s for any component s connected to plifiers the MVP871 Audio Video Player 2 If the MVP871 will be connected to a TV Monitor us ing the Component Video connections please refer to Sige the Setup Section entitled Component Video Out on m C C page 27 of this Owner s Manual for important informa e A f 2nd VODE nie w 3 The Super Audio Compact Discs SACD Audio Signals OT amp are converted internally from Digital to Analog wee m2 ver ronz 4 A PCM version of the decoded MP3 Signal is available me 7 at the Digital Audio Outputs 5 The MVP871 has built in 192kHz 24 Bit DACs Digital 06000 0009 SELECT pe
95. ru to Analog Converter to allow playing of DVDs re corded with a higher bit and sample rate by using the wen Analog Audio Outputs STOP BACK NEXT PLAY 6 Some Multichannel DVD DVD Video DVD Audio HW e and Super Audio Compact Discs might contain Low C J e Frequency Audio Signals below 80Hz in the Center GJ GJ G Wwe and or Surround Channels If the Loudspeakers in your GG amp Cz sound system are not capable of reproducing those Low o w o o Frequencies distortion and or possible damage to the G ED a a o Oo p Loudspeakers may occur Refer to page 22 For addi piso Tack OO OO BAK nor D aew tional information consult with your Dealer or refer to ee the Owner s Manual for your Loudspeakers McIntosh 0 7 The DVD Audio and Super Audio Compact Discs 000o Audio Signals are converted internally from Digital to Analog The Six Channel Analog Signals are available J at the UNBALANCED AUDIO OUTPUTS 5 1CH 8 The MVP871 basic transport functions may also be MWeIntosh controlled by using the Remote Control that comes with a McIntosh Control Center or Preamplifier McIntosh A Keypads can also be used to remotely control the basic transport functions of the MVP871 Remote Controls of certain McIntosh Control Centers or Preamplifiers also have additional Push buttons including Direction Keys Select Title Display and Menu that perform the same functions as the supplied MVP871 Remote Con
96. s through all the Loudspeakers to achive the desired results If one of the Loudspeakers is quieter than the others use it as areference to match the other loudspeakers to If the volume level of the subwoofer can t be adjusted to match the other Loudspeakers with the setup level adjustment set to maximum return it to 0dB and then switch the SW 10 setting to On and then readjust the Subwoofer level to match the other Loudpeakers WARNING Distortion from the subwoofer is possible if the SW 10dB boost is activated 4 When all the Loudspeakers are at the same volume level press the RTRN Return Push button to stop the Channel Level Adjustments and then press the RTRN Push button again to return to the SPEAKER CON FIGURATION Menu DELAY TIME ADJUSTMENTS The following Delay Time Adjustments will electronically compensate for dif ferent Loudspeaker distances from the Listening View ing Area Refer to figure 45 Delay Time 1s measured in feet or meters The delays can be adjusted from 0 foot Distances between Speakers to 27 feet in one and the Ideal Listening Viewing Area foot increments for each Loudspeaker Figure 45 3 Use the Down Note Before performing the Delay Time adjustments you must first have completed the Loudspeaker Size and Level adjustments Measure the distances of the Loudspeakers used in the Home Theater System from the Listening Viewing Area to each Loudspeaker to within t
97. ss the SELECT Push button 4 Next continue to the COMPRESSION Setup Menu item If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode Compression Watching a movie with a wide dynamic range late at night could disturb others not viewing the movie The MVP871 Compression feature reduces the dynamic range allowing enjoyment of the movie without disturbing others Select the Dolby Digital Sound Track DVD Disc Menus and to activate the Compression feature perform the following 1 Press the SETUP Push button on the supplied Remote Control to access the On Screen Language Setup Menu Then press the Right directional Push button to select the Audio Setup Tab Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button followed by the Right directional Push button on the Remote Control to select COMPRESSION Refer to figure 53 3 Use the Right directional RIGGS ERIE Push button AUDIO CHANNEL followed by DIGITAL OUTPUT the Up Aor DOWN SAMPLING SOURCE DIRECT Down direc BASS ENHANCER tional Push but OFF ON tons to select L the ON setting EXIT SETUP RETURN Then press the SELECT AV lt gt SET ENTER SELECT Push Figure 53 button 4 Next continue to the RATINGS Setup Menu i
98. t Opening for Ventilation Pe 1 1 16 2 0cm _ amp 5 8 94 91cm 15 1 2 39 37cm Cutout Opening for Ventilation Chassis Spacers 15 1 16 38 26cm 31 27cm vite OPTICAL DIGITAL HDMI OUT supplies AUDIO OUTPUT digital video and digi sends signals to a Con tal audio signals to an trol Center with a D A Input of an A V Con Converter or a decoder C OAXIAL DIGI TAL AUDIO OUT PUT sends signals to a Control Center with a D A Con verter or a decoder DIGITAL AUDIO OUTPUY OPTICAL COAXIAL UNBALANCED AUDIO O 5 1CH CENTER SURR FRONT SUBWOOF UNBALANCED UTPUTS UNBALANCED AUDIO OUT PUT supplies Two Channels of Ana log Audio and con nects to the Analog Input of an A V Control Center AUDIO OUTPUTS supply Six Channels of analog audio and connects to the Exter nal Input of an A V Control Center trol Center or other au dio video component S VIDEO OUTPUT supplies video signals to a S Input of an A V Control Center or oth er video component Melntosh mvPs71 AUDIO VIDEO PLAYER McINTOSH LABORATORY INC BINGHAMTON NY MADE IN USA BALANCED AUDIO OUTPUTS NUMBER 2CH L R HDMI OUT C E VIDEO S VIDEO COMPONENT VIDEO OUT OUT OUT Y P C P C o e VIDEO OUTput sup plies video signals to connect to a Com posite Input of an A V Control Center or other video com ponent BALANCED AUDIO OUTPUTS supply two channels of ana
99. tem If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may be also pressed to exit the setup mode SETUP con t How to Set the Ratings Rating Level Some DVD Movie discs have encoded rating levels that al low setting the MVP871 to prevent children from viewing inappropriate movies in your absence A password protect ed lock function set by you determines the rating limit for disc playback In the example below the default setting of No Limit Rating Level will be changed to Level 3 Note A Rating Level of 8 allows viewing of all DVD Movies and a Level of I plays movies suitable for children It is advisable to write down the password for future refer ence as once a password has been entered it will stay in effect until removed or changed 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then press the Right directional Push button to select the Ratings Menu Icon Tab Refer to figures 54 and 55 Note If there 3 Using the NUMERIC Push buttons on the Remote Control enter the default password 0000 followed by SELECT Pushbutton Refer to figure 57 4 Return to the Rating Menu by pressing the UpA direction al Push button 6 Next continue to the PASS WORD Set tings If no other changes are to be made in Setup Mode Aa A 4 ENTER A 4 DIGIT PASSWO
100. the Right directional Push but ton to select the Digital Interface Setup Tab Refer to figures 5 on page 20 and 9 DIGITAL INTERFACE SETUP HDMI RGB SETTING NORMAL HDMI AUDIO SETUP 2CH HDMI AUTO FORMAT PANEL RES l EXIT SETUP RETURN SELECT AV lt gt SET ENTER Figure 9 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button followed by the Right directional Push button on the Remote Control to select Audio Setup Refer to figure 10 The 2CH default setting passes thru a two channel digital audio signal and a two channel digital audio signal down DIGITAL INTERFACE SETUP mixed from a multi HDMI RGB SETTING HDMI AUDIO SETUP f channel disc HDMI AUTO FORMAT MULTINORMAL Note If either of MULTILPCM the MUL TIchannel settings helo ware EXIT SETUP RETURN h n SELECT AV lt gt SET ENTER chosen the MVP87I Au Figure 10 dio Setup s Audio Channel Menu item automatically switches to MULTI CHANNEL and will use the same settings as 22 the Audio Setup for Speakers Configuration Channel Levels and Delay Time the only exception being there is no SW 10dB adjustment The MULTIchannel NORMAL setting passes thru the digital audio signal unaltered 3 To change from 2CHannel setting to the MULTIchan nel NORMAL use the UpA or Down directional Push buttons followed by the SELECT
101. ting panel is 6 3 4 inches 17 2cm Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the draw ing 17 1 16 ae 43 34cm MVP871 directly above a heat gen erating component such as a high MVP871 Front Panel Custom Cabinet Cutout MVP871 AUDIO VIDEO PLAYER SELECT HDMI FORMAT 4 7 8 gt 12 38cm PLAY OPEN CLOSE STANDBY ON LPOMPPON powered amplifier If all the compo OOO nents are installed in a single cabinet a quiet running ventilation fan can be a definite asset in maintaining all the system compo nents at the coolest Cabinet Panel Front possible operating temperature A custom cabinet installation should provide the fol MVP871 Side View in Custom Cabinet Cutout Opening for Custom Mounting lowing minimum spacing dimen sions for cool operation Allow at least 2 inches 5 08cm above the top 2 inches 5 08cm below the bot tom and inch 2 54cm on each side of the Audio Video Player so that airflow is not obstructed Do not Shelf MVP871 Bottom View in Custom Cabinet Note Center the cutout Horizontally on the unit For purposes of clarity the above illustration is not drawn to scale Support st jt 7 62cm Cutou
102. tional Push button to select the Picture Black Level Setting Use the Up4 or Downw directional Push buttons to adjust the darkness of the colors in the dark areas of the image from a setting of 5 to 5 Note The Black Level adjustment is active for the Com ponent Video Outputs with the Progressive Scan Mode active and HDMI Outputs 10 Press the Right directional Push button to select the Chroma Level Setting Use the Up4 or Down direc tional Push buttons to adjust the intensity of the Colors in the image from a setting of 6 to 6 11 Press the Right directional Push button to select the Enhancer Setting Use the Up4 or Downw directional Push buttons to adjust contours of the image from a setting of 0 to 11 Note The Enhancer adjustment is active for the Com ponent Video Outputs with the Progressive Scan Mode active and HDMI Outputs To exit the Memory 1 Adjust 2 Mode press the SELECT Push button To make additional video adjustments use the Right directional Push button to select Memory 1 Adjust 3 and press the SELECT Push button If no other adjustments are to be made at this time exit by pressing PIC ADJ Push button Refer to figure 88 12 Press the Down directional Push button to activate the Dynamic Noise Reduction DNR Setting use the Up4 or Downw directional Push buttons to adjust the reduction of noise in the image from a setting of 0 to FI How to Operate the MVP871 con t 13 Press the F a Right d
103. uencies in the Video Signal Use the Up4 or Downw directional Push buttons to adjust the Sharpness from a setting of 6 to 6 Note The Sharpness Mid is not active for the HDMI Outputs only 6 Press the Right directional Push button to select the Picture Sharpness H1 which effects the range of high frequencies in the Video Signal Use the Up4 or Downw directional Push buttons to adjust the Sharp ness from a setting of 6 to 6 Note The Sharpness Hi is active for the Component Video Outputs with the Progressive Scan Mode active and HDMI Outputs 7 Press the Right directional Push button to select the Picture Hue Tint Setting Use the Up4 or Downw directional Push buttons to adjust the Hue from a set ting of 6 to 6 Note The Hue Setting is not active for the Component Video Output with the Interlaced Mode active 48 To exit the Memory 1 Adjust 1 Mode press the SELECT Push button To make additional video adjustments use the Right directional Push button to select Memory 1 Adjust 2 and press the SELECT Push button If no other adjustments are to be made at this time exit by pressing PIC ADJ Push button Refer to cu 87 8 Press the Downw am ton to activate the Picture FAT White U Level Set gt 4 ting use Ad the Up Jai Figure 87 or Downw directional Push buttons to adjust the brightness of White Areas of the image from a setting of 5 to 5 9 Press the Right direc
104. ut color and or a loss of Horizontal Vertical Synchronization refer to the TV Monitor Owner s Manual to determine the correct setting to be used 1 Press the SETUP Push button on the supplied Remote Control to access the Language Setup Menu Then SETUP con t press the Right directional Push button to select the Video Menu Icon Tab Refer to figure 24 Note If there is a Disc playing in the MVP871 press the STOP Push button twice before pressing the SETUP Push button 2 Use the Down directional Push button on the Re mote Control to select the TV TYPE Menu Refer to figure 29 3 To change from the default VIDEO SETUP setting use the Right direc TV ASPECT Nse tional Push COMPONENT VIDEO OUT PAL l button fol EN MULTI SQUEEZEMODE lowed by Up PROGRESSIVE MODE or Down PIXELCROPPING directional EXIT SETUP RETURN Push buttons SELECT AV lt gt SET ENTER and then press Figure 29 the SELECT Push button Note The title of the icon button bar will change color from yellow the cursor color to blue indicating the selected item 4 Return to the Video Setup Menu by pressing the Left followed by the Up directional Push buttons 5 Next continue to the COMPONENT VIDEO OUT Settings If no other changes are to be made in Setup Mode at this time exit by pressing the RTRN Return Push button Note The SETUP Push button may also be pressed to exit the setup mode Component Video Out This sele
105. utton to select Memory 1 Adjust 4 and press the SELECT Push button If no other adjustments are to be made at this time exit by pressing PIC ADJ Push button Refer to figure 89 The last Picture Adjustment is known as Gamma Cor rection This effects the linearity of Gray Scale values in an image A Gray Scale consists of an image containing the color Black and the color White with different intensi ties of the color Gray e g Black and White Movie The Gamma Correction Adjustment in the MVP871 allows for very fine adjustment of 10 different segments in the Gray Scale one segment at a time When these adjustments are me Ei Be Mik LEN i TY Ny Rei woe WN LLS Figure 88 used spar ingly they can make a significant im provement in the appearenc es of the video image over use can also have the op posite effect 17 Press the SELECT Push button to select the On Screen Gamma Graph Use the Right or Left lt directional Push buttons to highlight the desired adjustment point on the Gamma Curve Use the Up or Downw directional Push buttons to make fine adjustments to image Press the SELECT Push button to return to the Gamma Display The values indi cated are for each of the ten adjustment points on the Gamma Graph Refer to figure 90 When the desired adjustments are complete press the SE LECT Push PF T button to exit poama the Gamma u rey aA Oe settings and ek is press the PIC ADJ
106. ve backwards Front Panel Use to Pause Opens and Closes backward through one track chapter Information during play the disc tray for a track during at a time Display back loading or un playback loading discs Indicates the type of disc loaded CD CD Video DVD DVD Audio or DVD Video Indicates when the Play Mode is active SUPER DVD GROUP TITLE AUDIO VCD Front Panel Information Display E lt Indicates when Indicates when Indicates Indicates when the two digits be the disc con the Random the numeric low are display tains multiple Play Mode display is in ing the Group or viewing angles is active dicating the Title Number current Track Playing Time Indicates the Re Indicates Indicates Indicates Indicates peat Mode selected when the two the Pro when the when the Repeat All Repeat digits below gramed numeric numeric 1 Track or Repeat are display Track display is display is from point A to ing the Track Group indicating indicat point B on the disc or Chapter Play Mode the Total ing the Number is active Playing Remaining Time Playing Time ANGLE D MIX PROG RAND TOTAL SING REM HDCD Indicates when the CD Disc playing is HDCD encoded Indicates the channels of sound available on the disc which includes Front Left Front Center Front Right Surround Left Mono Sur round Surround Right and Low Frequency Effect Channel L PCMP PCM L c R ILFE SLI S SR

McIntosh MVP871 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents