Makita 9046 User's Manual
Contents
1. na k fa M Orbital Sander MODEL 9046 003270 DOUBLE INSULATION INSTRUCTION MANUAL A WARNING For your personal safety READ and UNDERSTAND before using SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE SPECIFICATIONS e Specifications may differ from country to country GENERAL SAFETY RULES Model Pad size Orbits per minute Overall length Net weight For All Tools A WARNING Read and understand all 9046 115 mm x 229 mm 4 1 2 x 9 6 000 283 mm 11 1 8 3 0 kg 6 6 Ibs Manufacturer reserves the right to change specifications without notice USA002 2 instructions Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS Work Area 1 Keep your work area clean and well lit Cluttered benches and dark areas invite acci dents Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Keep bystanders children and visitors away while operating a power tool Distrac tions can cause you to lose control Electrical Safety 4 Double insulated tools are equipped with a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit c2. 003295 1 Front grip A CAUTION e Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool Switch action A CAUTION e Before plugging in the tool always check to see that the switch trigger actuates properly and returns to the OFF position when released e Switch can be locked in ON position for ease of operator comfort during extended use Apply caution when locking tool in ON position and maintain firm grasp on tool To start the tool simply pull the switch trigger Release the switch trigger to stop For continuous operation pull the switch trigger and then push in the lock button To stop the tool from the locked position pull the switch trig ger fully then release it Front grip The front grip position can be changed in 90 increments Pull the front grip and rotate it to the desired position ASSEMBLY 003307 1 Conventional type of abrasive paper 2 Clamp lever 3 Pad 003309 003311 1 Hook and loop type of abrasive paper 2 Pad A CAUTION e Always be sure that the tool is switched off and unplugged before carrying out any work on the tool Installing or removing abrasive paper For conventional type of abrasive paper with pre punched holes standard equipment Turn the clamp lever to open the clamper Insert the paper end into the clamper aligning the holes in the paper with those in the pa
3. 418 871 5720 203 Colonnade Road Unit 6 Nepean Ontario K2E 7K3 613 224 5022 1950 Forbes St Whitby Ontario L1N 7B7 905 571 2200 317 Adelaide St S Unit 117 London Ontario N5Z 3L3 519 686 3115 6350 Tomken Rd Unit 8 Mississauga Ontario L5T 1Y3 905 670 7255 8 6115 Fourth St S E Calgary Alberta T2H 2H9 403 243 3995 11614 149 Street Edmonton Alberta T5M 3R3 780 455 6644 11771 Hammersmith Way Richmond B C V7A 5H6 604 272 3104 2131 Hartley Ave 103 Coquitlam B C V3K 2Z3 604 525 7434 1670 St James Street Winnipeg Manitoba R3H OL3 204 694 0402 206A 2750 Faithful Avenue Saskatoon Saskatchewan S7K 6M6 306 931 0111 tact our customer service department Tel 1 800 263 3734 When you need service e Explain the problem in a letter e Enclose the letter with the tool e Package carefully and send prepaid to the nearest Makita factory or authorized service centre DATE PURCHASED 1 800 263 3734 1 800 663 0909 1 800 361 7049 1 888 625 4821 1 888 745 5025 1 800 663 5757 1 888 560 2214 1 800 263 3734 1 800 571 0899 1 800 221 9811 1 800 267 0445 1 888 455 6644 1 800 663 0909 1 800 266 7738 1 800 550 5073 1 888 931 0111 CUSTOMER RECORD DEALER S NAME amp ADDRESS MODEL NO SERIAL NO MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected
4. length and nameplate ampere rating If in doubt use the next heavier gage The smaller the gage num ber the heavier the cord Table 1 Minimum gage for cord Not More Than AWG Ampere Rating More Than 18 13 SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product gained from repeated use replace strict adherence to sander safety rules If you use this tool unsafely or incorrectly you can suffer serious personal injury USB040 4 1 Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord Contact with a live wire will make exposed metal parts of the tool live and shock the operator Do not leave the tool running Operate the tool only when hand held This tool has not been waterproofed so do not use water on the workpiece sur face Ventilate your work area adequately when 2 Always use safety glasses or goggles S Baris sad opera ona Ordinary eye or sun glasses are NOT you p g op safety glasses Use of this tool to sand some products 3 Hold the tool firmly paints and wood could expose user to dust containing hazardous substances Use appropriate respiratory protection SAVE THESE INSTRUCTIONS 4 WARNING MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury FUNCTIONAL DESCRIPTION 003280 1 Lock button 2 Switch trigger
5. the tool on the workpiece sur face Keep the pad flush with the workpiece and apply slight pressure on the tool A CAUTION e Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance To maintain product SAFETY and RELIABILITY repairs car bon brush inspection and replacement any other mainte nance or adjustment should be performed by Makita Authorized or Factory Service Centers always using Makita replacement parts ACCESSORIES A CAUTION e These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of injury to persons Only use accessory or attachment for its stated purpose If you need any assistance for more details regarding these accessories ask your local Makita service center e Abrasive papers with pre punched holes e Hook and loop type abrasive papers with pre punched holes e Dust bag Memo Memo 11 Memo o C O S E a E oo gt h S lt ton sA 4 y W T lt 9 e lt c 2 9 N O N me O Z cu gt O M mn OZ Sta o 9 cs Your answers to the following questions are appreciated 1 This product was purchased from 3 How did you first learn of Makita Power Tools Hardware lumber Store Industrial Supply Magazine Newspaper Catalog Tool Distributor Othe
6. al starting Be sure switch is off before plugging in Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents Remove adjusting keys or wrenches before turning the tool on A wrench or a key that is left attached to a rotating part of the tool may result in personal injury Do not overreach Keep proper footing and balance at all times Proper footing and balance enables better control of the tool in unexpected situations 14 Use safety equipment Always wear eye protection Dust mask non skid safety shoes hard hat or hearing protection must be used for appropriate conditions Ordinary eye or sun glasses are NOT eye protection Tool Use and Care 15 16 17 18 19 20 21 22 Use clamps or other practical way to secure and support the workpiece to a stable platform Holding the work by hand or against your body is unstable and may lead to loss of control Do not force tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Do not use tool if switch does not turn it on or off Any tool that cannot be controlled with the switch is dangerous and must be repaired Disconnect the plug from the power source before making any adjustments changing accessories or storing the tool Such preventive safety measures reduce the risk of starting the tool accidentally Sto
7. and tested before leaving the factory It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase Should any trouble develop during this one year period return the COMPLETE tool freight prepaid to one of Makita s Factory or Authorized Service Centres If inspection shows the trouble is caused by defective workmanship or material Makita will repair or at our option replace without charge This Warranty does not apply e where normal maintenance is required repairs have been made or attempted by others e the tool has been abused misused or improperly maintained e alterations have been made to the tool IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT INCIDENTAL OR CONSEGUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT THIS DISCLAIMER APPLIES BOTH DURING AND AFTER THE TERM OF THIS WARRANTY The Makita Warranty is the only and the entire written warranty given by Makita for the Makita tools No dealer or his agent or employee is authorized to extend or enlarge upon this warranty by any verbal or written statement or advertisement MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A SPECIFIC PURPOSE AFTER THE ONE YEAR TERM OF THIS WARRANTY This Warranty gives you specific rights The provisions contained in this warranty are not intended to limit modify take away fro
8. d Then return the clamp lever to the original position to secure the paper Repeat the same process for the other end of the tool main taining the proper paper tension For hook and loop type of abrasive paper with pre punched holes optional accessory Remove all dirt or foreign matter from the pad Attach the paper to the pad aligning the holes in the paper with those in the pad A CAUTION e Always use hook and loop type of abrasive papers Never use pressure sensitive abrasive paper 003317 1 gt Mark 2 Mark 3 Dust bag 4 Entry port 5 Dust spout OPERATION 003331 MAINTENANCE Dust bag To install the dust bag align the gt mark on the bags entry port with the mark on the dust spout of the tool and fit the entry port onto the dust spout Then turn the dust bag clock wise to secure it in place For the best results empty the dust bag when it becomes approximately half full tapping it lightly to remove as much dust as possible NOTE e If you connect a Makita vacuum cleaner to this tool more efficient and cleaner operations can be performed Sanding operation A CAUTION e Never run the tool without the abrasive paper You may seriously damage the pad e Never force the tool Excessive pressure may decrease the sanding efficiency damage the abrasive paper or shorten tool life Hold the tool firmly Turn the tool on and wait until it attains full speed Then gently place
9. m disclaim or exclude any warranties set forth in any provincial legislation To the extent required by law the provisions in any provincial or federal legislation with respect to warranties take precedence over the provisions in this warranty Makita Corporation 3 11 8 Sumiyoshi cho Anjo Aichi 446 8502 Japan 883989 233
10. ontact a qualified elec trician to install a polarized outlet Do not change the plug in any way Double insula tion EI eliminates the need for the three wire grounded power cord and grounded power supply system Avoid body contact with grounded sur faces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your body is grounded Do not expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not abuse the cord Never use the cord to carry the tools or pull the plug from an outlet Keep cord away from heat oil sharp edges or moving parts Replace damaged cords immediately Damaged cords increase the risk of electric shock When operating a power tool outside use an outdoor extension cord marked W A or W These cords are rated for outdoor use and reduce the risk of electric shock Personal Safety 9 10 11 12 13 Stay alert watch what you are doing and use common sense when operating a power tool Do not use tool while tired or under the influence of drugs alcohol or medication A moment of inattention while operating power tools may result in serious personal injury Dress properly Do not wear loose cloth ing or jewelry Contain long hair Keep your hair clothing and gloves away from moving parts Loose clothes jewelry or long hair can be caught in moving parts Avoid accident
11. r From dealer Other Store display 2 Use of the product is intended for 4 Most favored points are Construction trade Home maintenance Design Makita Brand Industrial maintenance Other Features Power Size Other Price 5 Any comments Certificate of Warranty Mail to Makita Date Purchased Model No Month Day Year 20 Initial Last Name Male Female Single Married Street Address Postal Code AGE Under 19 20 29 30 39 40 49 Over 50 Occupation Dealers Name 8 Address MOODLE SO 5555500155551 L LLL Factory Service Centres Head Office Regional Office Regional Office Montreal Dartmouth Ville St Laurent Montreal Les Saules Quebec Nepean Ottawa Whitby London Mississauga Calgary Edmonton Richmond Coquitlam Winnipeg Saskatoon For the authorized service centre nearest you please refer to the local yellow pages directory under tools or con 1950 Forbes St Whitby Ontario L1N 7B7 905 571 2200 11771 Hammersmith Way Richmond B C V7A 5H6 604 272 3104 6389 boul Couture St Leonard Quebec H1P 3J5 514 323 1223 202 Brownlow Avenue Dartmouth N S B3B 175 902 468 7064 1140 Rue B gin Ville St Laurent Quebec H4R 1X1 514 745 5025 1200 St Jean Baptiste Unit 106 Les Saules Quebec G2E 5E8
12. re idle tools out of reach of children and other untrained persons Tools are dangerous in the hands of untrained users Maintain tools with care Keep cutting tools sharp and clean Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control Check for misalignment or binding of moving parts breakage of parts and any other condition that may affect the tools operation If damaged have the tool ser viced before using Many accidents are caused by poorly maintained tools Use only accessories that are recom mended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool SERVICE 23 Tool service must be performed only by qualified repair personnel Service or main tenance performed by unqualified personnel could result in a risk of injury 24 When servicing a tool use only identical replacement parts Follow instructions in the Maintenance section of this manual Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of electric shock or injury USE PROPER EXTENSION CORD Make sure your extension cord is in good condition When using an extension cord be sure to use one heavy enough to carry the current your product will draw An undersized cord will cause a drop in line voltage resulting in loss of power and overheating Table 1 shows the correct size to use depending on cord
Download Pdf Manuals
Related Search