Lumiscope Blood Glucose Meter 100-040 User's Manual
Contents
1. INTENDED USE The Lumiscope Designer Professional Combo Kit shown on the next page is intended to measure arterial blood pressure 100 040 INS LAB RevC13 100 040 Aneroid Sphygmomanometer with Sprague Style Stethoscope BLOOD PRESSURE Blood Pressure is a measure of the blood s pressure in the circulatory system which changes constantly during the course of the cardiac cycle Blood pressure readings report two values The higher reading systolic pressure shows the highest pressure in the arteries occurring when the heart contracts The lower reading diastolic pressure shows the lowest pressure in the arteries which occurs right before the heart contracts Blood pressure readings are written with the highest value first then the lowest value Readings of 120 80 are considered to be normal with high blood pressure being defined as a systolic pressure which is 140mmHg or more at rest and a diastolic pressure which is 90mmHg or more at rest Only a patient s physician is qualified to determine whether the readings obtained are normal for that person Measuring blood pressure Have the patient while relaxed and ina sitting position extend the arm from which the blood pressure will be taken to the front or laterally with the palm of the hand up Attach the cuff and diaphragm Place the cuff approximately one inch above the bend of the elbow against the skin of the upper arm with the artery marker placed on top of the brac2. LUMISCOPE For The Quality Of Life Designer Professional Combo Kit with Aneroid Blood Pressure Unit and Sprague Style Stethoscope Model 100 040 User Manual Read this manual before operating the Designer Professional Combo Kit Save this manual for future reference CONTENTS SAFETY GUIDELINES PLEASE READ BEFORE USE ssssssssssssssssssesssseessssesssesssseessess 1 INTENDED OS owt cece th ate ea eae ect aa neal eae Penal ceed 1 BLOOD PRESSURE scicsccccciscrsssnstsssisaasienssricannctartemstes Aasiaa KESESER EEEE ETEA ENE TEENE Eiti 2 MAINTENANCE eissernir eE ae erie eit 3 WARRANTY nonninnanannsnn n i SE SEa 4 SAFETY GUIDELINES PLEASE READ BEFORE USE Z WARNING Important Read and understand these instructions before installing or using the Lumiscope Designer Professional Combo Kit If you do not understand any part of these instructions contact your medical professional or Graham Field authorized distributor for direction in the use of this product Z WARNING If components are damaged or missing contact your Graham Field distributor immediately DO NOT use substitute parts Z WARNING Notice for California Customers California Proposition 65 WARNING This product contains a chemical known to the State of California to cause cancer and reproductive or developmental harm Z WARNING GF Health Products Inc assumes no responsibility for any damage or injury caused by improper installation or use of this product
3. fications including the most current version of these instructions please visit our website at www grahamfield com Graham Field and Lumiscope are registered trademarks of GF Health Products Inc GF Health Products Inc Graham Field 2935 Northeast Parkway Atlanta Georgia 30360 GRAHAM FIELD www grahamfield com 2008 GF Health Products Inc
4. hial artery Never place the cuff over clothing Wrap the cuff around the arm and secure the cuff with the touch and hold strap lf the cuff has a metal D shaped ring pull the free end of the cuff through the D ring and close the cuff with the touch and hold strap The cuff should be snug but not too tight If one or two fingers can fit between the cuff and the arm the cuff is properly secured Place the diaphragm of the stethoscope over the brachial artery inferior to the cuff 2 Lumiscope Designer Professional Combo Kit with Sprague Style Stethoscope Inflating the cuff Close the bulb s air valve by turning the air release valve clockwise Squeeze the inflation bulb at a steady rate until the gauge s needle points at approximately 30mmHg above the individual s normal systolic pressure value If the individual s normal blood pressure is not known it is recommended to inflate to 200mmHg Systolic blood pressure reading Open the air release valve slowly by turning it counter clockwise while holding the diaphragm of the stethoscope over the brachial artery Proper deflation rate is vital for an accurate reading The recommended deflation rate is 2 3mmHg per second or a drop of one to two marks on the pressure gauge with each heartbeat Do not keep the cuff inflated any longer than necessary As the cuff begins to deflate listen carefully with the stethoscope Note the reading on the gauge as soon as a faint rhythmic tap
5. it with Sprague Style Stethoscope 3 WARRANTY GF Health Products Inc guarantees the Designer Professional Combo Kit with Aneroid Blood Pressure Unit and Sprague Style Stethoscope Model 100 040 free from defects in material and workmanship for a period of two years from the date of purchase when used for the purpose intended under normal conditions and provided the product receives proper care and maintenance If within such warranty period any such product shall be proven to be defective such product shall be repaired or replaced at Graham Field s option The warranty does not include any labor charges incurred in replacement part s installation or any associated freight or shipping charges to the manufacturer Graham Field s sole obligation and your exclusive remedy under this warranty shall be limited to such repair and or replacement The warranties contained herein contain all the representations and warranties with respect to the subject matter of this document and supersede all prior negotiations agreements and understandings with respect thereto The recipient of this document hereby acknowledges and represents that it has not relied on any representation assertion guarantee warranty collateral contract or other assurance except those set out in this document GF Health Products Inc is not responsible for typographical errors For the most updated and current information on packaging warranties products and speci
6. ping or thumping sound is heard The first sound is the systolic pressure reading Always check with your health care provider to ensure readings are performed correctly Diastolic blood pressure reading Allow the pressure to continue dropping at the same deflation rate Note the reading on the gauge when the last audible thumping swishing or blowing sound is heard this is the diastolic blood pressure reading After a few seconds have passed and no audible thumping swishing or blowing sounds are heard deflate the cuff using the air release valve completely Remove the cuff and stethoscope from the arm Record the systolic and diastolic readings Repeat the measurement two or more times to ensure accuracy Only a patient s physician is qualified to analyze blood pressure MAINTENANCE Recommended care and maintenance Do not drop or pull excessively on the blood pressure unit or stethoscope components Never inflate beyond 300mmHg Do not expose this product to direct sunlight Do not place this product in contact with sharp objects which could pierce the material and cause damage Do not dismantle or disassemble this product Cleaning Wipe off the blood pressure unit stethoscope and bulb with a clean damp cloth Wash the cuff with soap and cold water rinse and air dry Storage Always deflate the cuff completely before storage Store the complete instrument in the provided storage case Lumiscope Designer Professional Combo K
Download Pdf Manuals
Related Search