Lowrance electronic ELITE-7M User's Manual
Contents
1. pi z m 2 z wi Copyright O 2012 Navico All rights reserved Lowrance and Navico are registered trademarks of Navico Fishing Hot Spots is a registered trademark of Fishing Hot Spots Inc Navionics is a registered trademark of Navionics Inc Navico may find it necessary to change or end our policies regulations and special offers at any time We reserve the right to do so without notice All features and specifications subject to change without notice Compliance Statements Lowrance Elite 7M e meets the technical standards in accordance with Part 15 103 of the FCC rules e complies with CE under RTTE directive 1999 5 EC e complies with the requirements of level 2 devices of the Radiocommunications Electromagnetic Compatibility standard 2008 For more information please refer to our website www lowrance com Warning The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipMent generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interfer e2. Chart Operation Elite 7m 20 Chart Settings Controls map data used on the chart screen as well as display settings like grid lines waypoints routes and trails Lowrance Chart data Lowrance COG extension Off Grid lines Waypoints Routes Trails Waypoints Routes Trails Chart Settings menu Chart Data Selects map data that will be used on the Chart display Lowrance or Navionics regional map Go to Navionics com to see a full selection of available charts 21 COG Extension A line extending from the front of the current position icon that esti mates the time and distance to ar eas in front of you Grid Lines Displays base values for ia latitude and longitude making it easier to get a general idea of your location on the latitude longitude scale i 36 14 Chart Operation Elite 7m Waypoints Routes and Trail displays From the Chart Settings menu you can turn on off waypoint route and trail display properties Turning off display properties allows you to get a better view of the map if the screen becomes cluttered with waypoints routes and or trails Waypoints Routes Trails Accesses the Waypoints Routes amp Trails screen Waypoints Routes and Trails are covered in the Chart section Chart Operation Elite 7m Navigation Settings Advanced mode only Controls Arrival Radius and Off Course distance settings and is used to turn on off WAAS MS
3. advanced Advanced mode X Restore defaults features and Browse files settings About Select Language Set Language English US Frangais Espanol Deutsch Selects the language used on Italiano menus and text boxes Dansk English UK Svenska Nederlands e Audio Adjusts volume and turns on off unit audio like key beeps alarm sounds etc Time Time Local time Time format Date format 10 41AM 12 hour MM dd YYYY Save Close Used to set local time and time and date formats for your unit GPS Monitors the location of satellites in view and the quality of the unit s satellite lock on SX WAAS MSAS EGNOS Trip Calculator 2 76 mph Tracks trip time speed and distance when you are moving faster than the selected threshold 0 00 mph 0 00 mph 0 00 00 0 00 mi Advanced Mode Enables features and settings only available with unit in Advanced Mode Restore Defaults Switches the unit back to default settings Restore Defaults e Are you sure you want to restore all defaults No Waypoints Routes or Trails will be lost Restore Cancel Browse Files Allows you to view a list of the files saved to the microSD card Settings Elite 7m Saving Screenshots You can save screenshots to a microSD card by inserting a microSD card into the card slot and pressing Power and then Zoom You must view files on a computer or ot
4. ENTER Edit New Show Start Delete Navigating a route Routes can be navigated in forward or reverse DEE EN 1 Select the desired route on the Route screen and press MENU Chart Operation Elite 7m Save to card Load from card Return to Chart 2 Select Start and press ENTER 3 Select Forward or Reverse and press ENTER 4 Press MENU and select Return to Chart Press ENTER Edit New Route 2 Show gt Start navigating along route forward or reverse Sta Rites Delete Forward Reverse Cancel Delete Route 9 Are you sure you want to delete Benin Route Route 1 Delete all a Delete all routes elete Cance ag arr Save to card Load from card Return to Chart Routes menu Cancel Cancel To cancel navigation 1 Press Menu from the chart screen 2 Select Navigation and press ENTER 3 Highlight Cancel and press ENTER 4 Select Yes and press ENTER Edit and New Route menus Used to edit create routes route names and to turn on off the route display Turns on off route display on map To edit create a route use the keypad to select the Leg Name field and press Enter Add to end gt View Stop editing Done To access the Edit or New Route menu select Edit or New on the Routes menu and press ENTER To finalize changes on the Edit or New Route menus highlight the Accept button and press ENTER Displayed
5. Used to show hide a route on the display which prevents the screen from being cluttered by too many routes Delete and Delete All Delete Route Delete is used to delete individual routes Delete All removes all routes GY re you sure you want to delete Route Route 1 Delete Cancel 17 Chart Operation Elite 7m Trails Screen Used to create edit navigate and delete trails Use the keypad to highlight the Trails tab to access the Trails screen Edit New Show Delete Waypoints Routes Trails Displayed Record Name Z amp Trail 1 Delete all Save to card Load from card Return to Chart Trails menu Trails screen Creating trails When creating a trail you can customize the trail name and color from the New Trail Chart Operation Elite 7m Edit Trail New Trail Trail 1 Trail 3 X Displayed X Displayed X Record Save Cancel Save Cancel X Record Create route Edit New Show Are yo sure you want to delete Trail Delete Delete Cancel Delete Trail Delete All Trails gt Are you sure you want to delete all Delete all Dior Delete all Cancel Save to card Load from card Return to Chart Trails menu Load Waypoints Cancel Cancel To create a trail 1 Select New and press ENTER The New Trail dialog will appear 2 Select Save and press ENTER Edit and New Trail menus Navigating a trail Allows you to edit create
6. W 095 50 579 Save Cancel 13 Chart Operation Elite 7m New Creates a new waypoint at the cursor or vessel as position You can also select MEET TET waypoint name icon and Fr latitude longitude from the new waypoint menu New Waypoint at Vessel Cancel Show Displays the selected waypoint on the map Goto Allows you to navigate to a waypoint Delete and Delete All Delete Waypoint Delete is used to delete a selected waypoint Delete All deletes all waypoints G re you sure you want to delete 27 Waypoint001 Delete Cancel Chart Operation Elite 7m Sort Controls how the waypoints list will be sorted by name or by nearest Nearest Nearest Name Routes Screen Used to create edit navigate and delete routes Use the keypad to highlight the Routes tab to ac cess the Routes screen Edit New Delete Delete all Save to card Load from card Return to Chart Routes menu Routes screen Creating a route Routes can be created by inserting waypoints from the waypoints list or by using the cursor to posi tion new points on the chart You also can add way points to a route by selecting them from the chart screen 14 Inserts waypoint between existing route waypoints Waypoint from list Point using chart N 36925 923 W 95939 901 arning Save Cancel Adds waypoint to end of the route Waypoint from list In
7. 1 From the Chart page press MENU 2 Select Overlay data and press ENTER 3 Select Configure and press ENTER 4 Press Menu and select Add Press ENTER 5 Select a data category and press ENTER 6 Select the desired data and press ENTER 7 Press MENU and select Return to Overlays Press ENTER 8 Press MENU select Done Configuring and press ENTER Customizing Overlay Data You can select a data source add remove data and adjust the size and position of overlay data on the screen Move Select the desired overlay MENER data from the Configure Item Add Locations and Sizes dialog and aes press MENU The configuration menu will appear Data sources Done configuring Data sources Used to select the network device that will supply source data for a selected data type To select a data source 1 Select Data sources and press ENTER 2 Select the data type and press the keypad to the right 3 Highlight the desired data source and press ENTER 11 Pages Elite 7m Chart Operation System Navigation Chart Alarms Units NMEA 0183 New Waypoint at Vessel NMEA 2000 Ts Simulator 004 N 22022222 W TEETE Cancel North up 7 North up New waypoint COG up Waypoints Routes Trails Orientation North up i Overlay data EFE x N 36 22 649 NN i N PV Settings s 24 1mi 308 M i Pie SEE GS rd VSS Chart menu Chart Menu Press MENU from a
8. 5 Software Updates 26 Sort waypoints 14 Standby mode 8 Steer Page 9 System settings 24 T Text entry 7 Time 25 Trail display 22 Trails Screen 18 Turn unit on off 3 U Unit Controls 3 Units 27 W Waypoint display 22 Waypoints Routes Trails 13 Working with menus 6 31 Index Elite 7m Navico Databases License Agreement THIS IS A LEGAL AGREEMENT BETWEEN THE END USER WHO FIRST PURCHASES THIS PRODUCT AS A CONSUMER ITEM FOR PERSONAL FAMILY OR HOUSEHOLD USE YOU AND NAVICO THE MANUFACTURER OF THIS PRODUCT WE OUR OR US USING THE PRODUCT ACCOMPANIED BY THIS LICENSE AGREEMENT CONSTITUTES ACCEPTANCE OF THESE TERMS AND CONDITIONS IF YOU DO NOT ACCEPT ALL TERMS AND CONDITIONS PROMPTLY RETURN THE PRODUCT WITHIN 30 DAYS OF PURCHASE PLEASE RETURN USING THE ENCLOSED UPS SHIPPING LABEL AND INCLUDE PROOF OF PURCHASE NAME ADDRESS AND PHONE NUMBER YOUR PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE REFUNDED PLEASE ALLOW 4 6 WEEKS TO PROCESS YOUR REFUND 1 This License Agreement applies to the one or more databases that your product may contain We refer to these singly as a Database and together as the Da tabases Your product may thus include the WBS Database which contains worldwide background surface mapping data the Indigo Database which contains inland mapping data or other Databases 2 The Databases that your product may contain are licensed not sold We
9. grant to you the nonexclusive nonassignable right to use these Databases for supple mental navigation reference purposes but only as long as you comply with the terms and conditions of this License Agreement We reserve the right to terminate this license if you violate any aspect of this License Agreement You are responsible for using official government charts and prudent navigation for safe travel 3 The Databases housed in your product are protected by the copyright notices appearing on the product or its screen s You may NOT modify adapt trans late reverse engineer decompile disassemble rent lease or resell any Data base and you may NOT create derivative works based upon any Database or its contents Any unauthorized reproduction use or transfer of a Database may be a crime and may subject you to damages and attorney fees 4 This License Agreement will terminate immediately without prior notice from us if you fail to comply with or violate any of the provisions of this Agreement Upon termination you will promptly return all products containing one or more Databases to us 5 Prices and programs are subject to change without notice 6 This License Agreement shall be governed by the laws of the State of Oklahoma and comprises the complete and exclusive understanding between you and us concerning the above subject matter Databases Limited Warranty We our or us refers to Navico the manufacturer of
10. this product You or your refers to the first person who purchases the product as a consumer item for personal family or household use The Databases Limited Warranty applies to the one or more databases that your product may contain We refer to each of these as a Database or together as the Databases Your product may thus include the WBS Database which contains worldwide background surface mapping data the Indigo Database which contains inland mapping data or other Databases We warrant to you that we have accurately compiled processed and reproduced the portions of the source material on which the Databases are based However we are under no obliga tion to provide updates to the Databases and the data contained in the Databases may be incomplete when compared to the source material WE MAKE NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND ABOUT THE ACCURACY OF THE SOURCE MATERIAL ITSELF INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE If there is a defect in any Database your exclusive remedy shall be at our option either a refund of the price you paid for the product containing the defective Database or a replacement of such product WE WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO ANY ONE FOR ANY SPECIAL CONSEQUENTIAL INCIDENTAL OR OTHER INDIRECT DAMAGE OF ANY KIND Some states do not allow the exclusion or limitation of incidental or consequent
11. to fg Brightness 10 Night mode C access the Backlight dialog Select Standby and press ENTER Standby Power off Press any key to resume normal or operation NOTE Leaving your unit in Standby mode when your boat is not is use will run down your battery lt Restore defaults Resets unit options and settings to defaults Pages Direction to cursor Current Track Compass 0 o 47 CRS ETA PM 2 56 01 SOG mph Going To Cursor Navigation information Your location Steer Page The Steer page has a compass that shows your current track the direction to your destination and a digital data navigation panel Current location Depth contours N 36 22 64 W 96 10 299 24 1mi 308 M i Current location distance to cursor Zoom Waypoint Range Chart Page Consists of map that moves in real time as you move By default the map is shown from a birds eye view with North at the top of the screen Pages Elite 7m Overlay Data Used to select data shown on the Chart page mpl 0 00 Overlay data Show Enables disables the display of overlay data allowing you to remove overlay data from the screen without deleting the current overlay data configuration North up gt Orientation Overlay data Settings Show x Configure Configure Allows you to select customize overlay data Pages Elite 7m 10 To add overlay data
12. to the MOB page menus waypoint You must cancel navi ENTER finalizes menu selections gation to terminate the function save waypoint at cursor position PAGES allows you to select a page to view ENTER Adjusting This unit has 10 backlight levels MOB press and hold both Zoom keys the Press the LIGHT POWER key to to create a Man Overboard waypoint backlight switch backlight levels OG ZOOM Keys used to zoom in zoom out Select Mute Audio from the microSD slot insert a blank microSD card to System menu and press ENTER save screen captures or insert a microSD map ping card to use mapping data See illustration Selecting a on page 2 GPS Source Select GPS from the System settings menu Highlight GPS source and press ENTER Select the desired source 3 Introduction Elite 7m Inserting microSD cards Carefully slide the microSD card into the slot until it clicks into place To remove carefully push in the card until it clicks out of place Introduction Elite 7m 4 Basic Operation Page menus The Steer and Chart pages have menus that can Setup wizard only be accessed when those pages are displayed The Setup wizard will appear when the unit is turned on for the first time To choose your own settings do not run the setup wizard To restart the Setup wizard restore defaults New waypoint Waypoints Routes Trails Orientation North up Overlay data Settings Cha
13. trails select trails names A trail must be saved as a route before it can be trail color trail display and the trail being recorded navigated You can also convert a trail into a route from the Edit Trail menu To save a trail as a route 1 Highlight the desired trail on the Trails screen and press ENTER The Edit Trail menu will appear 2 Highlight Create Route and press ENTER The Edit Route menu will appear Highlight Done and press ENTER Edit Trail Turns on X Di Record Turns on off trail Create route off trail 4 For navigation instructions refer to the display Save Cancel recording Navigating a route segment on map eee Edit Trails menu Displayed and Record Displayed allows you to show hide trails on the map display preventing the screen from being cluttered with trails 19 Chart Operation Elite 7m The Record command allows you to record or Overlay Data resume recording a desired trail J Allows you to select data course over ground etc to be displayed on top of the Chart page Delete and Delete All 60 Delete is used to remove Ba aLi re you sure you want to delete Trail individual trails Delete KODEKA All removes all trails 2 Trail 1 Delete Cancel Cotogah Ne r Orientation Allows you to select North Up or Course Over Overlay data setup is covered in the Pages section Ground COG as the map orientation Settings Accesses the Chart settings menu
14. 1 for each character 3 When entry is completed highlight OK NOTE Press the MENU key to Exit and press ENTER menus Switches letters to uppercase lowercase Dialogs Dialogs are used for user input fil Switches keyboard or for presenting information to fre sa i EET ARE ll des the user Depending on the type Segel ayou Cancel of information or entry different HULEN methods are used to confirm Close cancel or close the dialog Cursor The keypad moves the cursor around the display allowing you to scroll the map select map items Entering text and review sonar history Some functions like naming a waypoint route or Press MENU and select Return to vessel or Exit cur trail will require you to input text sor mode to clear the cursor 7 Basic Operation Elite 7m Goto cursor Used to navigate to the cursor 1 Move the cursor to a desired location and press MENU 2 Select Goto cursor and press ENTER Advanced Mode Enables advanced features and settings The following features are enabled when Advanced mode is turned on e Navigation Enables arrival radius off course distance and Bearings setting e Alarms Enables arrival off course and anchor alarm options e NMEA 0183 Output e Units Enables distance speed depth temperature and bearings options Basic Operation Elite 7m Standby mode Lowers power consumption by turning off sonar and the display Press the PWRI LIGHT key
15. AS EGNOS Arrival Radius Off Course JOWN to adjust digit DOWN to adjust digit RIGHT to move RIGHT to move Press ENTER when satisfied or ress ENTER when satisfied or U fi iti press MENU for additional N or additional options 0050 Feet 0 0094 mi 0100 Feet 0 0190 mi Arrival radius 50ft Off course distance 100ft Bearings METIE g Magnetic variation Auto 4 6 E z Navigation Settings menu True Manual 0 0 W Magnetic Auto 4 5 E 22 Arrival Radius Sets the arrival radius threshold for the Arrival alarm The arrival alarm will sound when your ves sel comes within a selected distance arrival radius of the destination waypoint Off Course Distance Sets Off Course Distance threshold for the Off Course alarm When the selected off course dis tance is exceeded the Off Course alarm will sound when the alarm is enabled Bearings Controls whether bearing will be calculated using True North or Magnetic North Magnetic North should be used when navigating with a compass course or heading otherwise use the default set ting True North Magnetic Variation Controls whether magnetic variation will be calcu lated using Automatic or Manual settings Magnet ic variation is the angle between magnetic north and true north The automatic setting reconciles the variation for you D WARNING You should only use the Manual magnetic variation setting if you have variation information from a verif
16. C Transmit Power 250W RMS Voltage Input 10 to 17V Power Requirement Mapping card microSD and microSDHC slot 16 parallel channel internal optional SPa Antenna external GPS antenna sold separately Fishing Hot Spots NauticPath amp Navionics Hotmaps Premium and Gold Waypoints Up to 3000 waypoints 100 routes and Routes amp Trails 100 retraceable plot trails Mapping compatibility Specifications Elite 7m Index About 26 Advanced Mode 8 Alarms 26 Anchor alarm 27 Arrival alarm 27 Arrival Radius 23 Bearings 23 Browse Files 25 C Cancel navigation 17 Chart 21 Chart Data 21 Chart menu 21 Index Elite 7m Chart Page 9 COG Extension 21 Creating a route 14 Creating trails 18 Cursor 7 D Data Port 25 Dialogs 7 Dropdown menus 7 E Editing waypoints 13 G Goto cursor 8 Goto waypoint 14 GPS Source 25 GPS Status 25 Grid Lines 21 Language 25 M Magnetic Variation 23 Man Overboard waypoint 3 Man Overboard way point 3 microSD cards 4 Mute Audio 25 30 N Navigating a route 16 Navigating a trail 19 Navigation 22 Navigation menu 22 New Waypoint 12 NMEA 0183 27 NMEA 2000 27 Data sources 28 O Off Course alarm 27 Off Course Distance 23 On Off features 6 Orientation 20 Overlay Data 10 20 Configure 10 Customizing 11 Show 10 P Page menus 5 R Route display 22 Routes Screen 14 S Saving Screenshots 26 Scrollbars 6 Setup wizard
17. VHW Units v Baud rate Allows you to select the unit of measure used by the unit Unit options vary depending on whether the unit is in basic or advanced mode 7 NMEA 2000 istance Miles X US Standard Speed MPH i US Standard Death With the unit connected to a NMEA 2000 network dagene Ie RI you can select a GPS antenna on the network as Basic Mode Advanced Mode your GPS source and share newly created way points with other display units on the network 27 Settings Elite 7m You will not be able to share existing waypoints Only waypoints created while the unit is connect ed to a NMEA 2000 network can be shared and only with units on that network Data Source Selection GPS Outo Elite 7 HDI Display HDS Gen2 10 iGPS Selecting a GPS source Data sources Allows you to select the source this unit will use for GPS data Device list Used to view data for devices connected to your NMEA 2000 network Settings Elite 7m 28 Simulator Simulates GPS and or sonar activity Simulations can be customized on the Simulator options menu Elite 7m 5 3 H 234mm x 9 2 W 136mm 5 9 H 151mm with bracket 7 diagonal 16 bit color Full VGA Solar MAX 800x480 color TFT Waterproof stan IPX7 dard Backlight LED 10 levels Case Size Display Communications ME NMEA 0183 Output Declaration of Part 15 103 FCC rules amp CE RTTE directive Conformity 1999 5 E
18. age menus scssceeeeeererrereereerrererrene e e 9 Accessing the Settings Menu RT oCo PAGE e EEE 9 Accessing menu items e Pee 9 Working with MENUS 2222 e Overlay Pre 10 OOS eenean a O 7 1 Table of Contents Elite 7m Chart Operation rannnnnnnnennnvnnnnnn 12 Chart Menu ccccssscccseeeceseesseeeenees 12 Waypoints Routes Trails 13 Routes SCION cccsececeseeceeeeeseeeesees 14 Trails Screen rranrrnnnrornnnrovnnrnvnnnrnnnnere 18 Orientation ssssssesseeeeeeerrernernner 20 Chart Settings rrranrrnnnrnnnrrvanrnnnnnnnre 21 Navigation Settings cc cece eees 22 SEUNGS se 24 Settings MenuU rurrnnrnnnrrnnennrrvnernnnennner 24 SV SUC esissssineaisiariniemabarsinciiceesinertingiicwasnewsnianimaniind 24 Table of Contents Elite 7m PRAMAS aainsdneetedeanspescayunarindionantebaeduededuepes 26 Saving Screenshots 26 Specifications nrnnrnnnnnnnnnnnnennevnnenn 29 IndeX EE 30 Unit Controls Getting Started LIGHT POWER controls backlight To turn on off the unit press and level and turns unit on off Turn unit old the LIGHT POWER key for on off three seconds KEYPAD controls cursor amp selects l items on menus Press the ZOOM IN and ZOOM OUT keys at the same time to set Man a Man Overboard waypoint Your Overboard system will automatically create MENU opens settings context and waypoint an active route back
19. her microSD compatible device NOTE You cannot save screenshots to a Navionics card or other mapping cards lt About Displays software information about this unit Before attempting a software update you can check the version of software your unit is using by accessing the About screen Lowrance periodically updates unit software to add features and improve functionality To see the latest available software version go to www lowrance com Settings Elite 7m 26 Alarms Enables alarms and selects alarm thresholds Arrival Off Course and Anchor alarms are only available in Advanced mode Off Course OWN to adjust for val 1200 Feet 0 2273 mi Enabled Radius Arrival Enabled X Distance 100ft Off course gt Anchor Alarms menu Enabled Distance p 100 Feet 0 0190 mi NMEA 0183 Output sounds alarm when you are within a selected You can select the NMEA 0183 sentences the unit Arrival distance of your destination Advanced will use when connected to a VHF radio or other Mode only NMEA 0183 device Off sounds alarm when course exceeds a i selected off course threshold Advanced You can also adjust the Baud rate but the default Mode only setting works best under most conditions Anch sounds alarm when vessel moves a selected nehor distance Advanced Mode only Course NMEA 0183 Output Sentences A GLL A GGA X RMC and RMB X GSA and GSV X BWC X viw X
20. ial damages so the above limitations or exclusions may not apply to you This warranty does NOT apply in the following circumstances 1 when the product has been serviced or repaired by anyone other than us 2 when the product has been connected installed combined altered adjusted or handled in a manner other than according to the instructions furnished with the product 3 when any serial number has been effaced altered or removed or 4 when any defect problem loss or damage has resulted from any accident misuse negligence or carelessness or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner s manual for the product We reserve the right to make changes or improvements in our products from time to time without incurring the obligation to install such improvements or changes on equipment or items previously manufactured This warranty gives you specific legal rights and you may also have other rights which may vary from state to state Your remedies under this warranty will be available so long as you can show in a reasonable manner that the defect occurred within one 1 year from the date of your original purchase and we must receive your warranty claim no later than 30 days after such 1 year period expires Your claim must be substantiated by a dated sales receipt or sales slip Contact information Customer Service 1 800 628 4487 8 a m to 5 p m Centra
21. ied source 23 Chart Operation Elite 7m Settings Settings menu Accesses installation and configuration settings for your unit Chart data Lowrance COG extension Off Grid lines Waypoints Routes Trails Waypoints Routes Trails Distance Miles Speed MPH Depth Feet Fahrenheit Magnetic Temperature Bearings Advanced mode only Data sources Device list Settings Elite 7m Language Audio Time GPS Trip calculator Advanced mode Restore defaults Arrival radius 50ft Off course distance 100ft Browse files About Bearings Magnetic Magnetic variation Auto 4 6 E p Arrival gt Off course gt Anchor gt NMEA 0183 NMEA 2000 Simulator Settings menu Advanced mode only Simulate Options System Adjusts unit settings like language mute audio and advanced mode Time 10 41AM 12 hour z MM dd YYYY Save Close Local time Time format Date format 2 76 mph 0 00 mph 0 00 mph 0 00 00 0 00 mi Restore Defaults re you sure you want to restore all defaults No Waypoints Routes or Trails will be lost Restore Cancel 24 System menu Displays software information Select Language English US Frangais Espanol Deutsch Italiano Dansk English UK Svenska Nederlands e Language Audio Time GPS Enables Trip calculator
22. l Standard Time M F Canada 1 855 361 1564 canada navico com 8 a m to 5 p m Eastern Standard Time M F Ordering Accessories http store navico com Visit our website www lowrance com Visit our website www lowrance com x 9988 10433 00 1
23. nce to radio communications However there is no guarantee that the interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that of the receiver e Consult the dealer or an experienced technician for help WARNING When a GPS unit is used in a vehicle the vehicle operator is solely responsible for operating the vehicle in a safe manner Vehicle operators must maintain full surveillance of all 1 pertinent driving and boating conditions at all times An accident or collision resulting in damage to property personal injury or death could occur if the operator of a GPS equipped vehicle fails to pay full attention to travel conditions and vehicle operation while the vehicle is in motion Table of contents Introduction immmmtummmu BENTE HAG gt REE 7 Unit Controls PQ Tr 7 Inserting microSD cards cccccccseeeeeeeee MOM 8 Basic Operation cc p Advanced MOQE uuespnams ntememn 8 Setup Wizard scenerne 5 Standby mode uu seein 8 Pages ccecccccesceseseessescersersereerserserenseeneaees 5 Restore defaults 0 0 eee 8 P
24. ny Chart pages to open the New Waypoint Chart menu Creates a waypoint at your current location or at the cursor position When the cursor is on the screen waypoints will be saved at the cursor position conversely if the cursor is not displayed onscreen waypoints will be saved at your current position Chart Operation Elite 7m 12 Waypoints Routes Trails Used to create edit navigate and delete way points routes and trails Press the keypad left right to toggle between waypoint routes and trails tabs Edit New Show Goto Delete Sort Nearest Delete alll New Waypoint at Cursor Name 004 4s L N 36908 971 W 095950 582 Save Cancel Delete Waypoint 7 Are you sure you want to delete 2 Waypoint001 Delete Cancel Delete All Waypoints Are you sure you want to delete all waypoints Delete Cancel Edit New Show Goto Delete Sort Edit waypoint Name 001 vo N 36908 971 W 095 50 579 Save Cancel eae ok Nearest Nearest 2 Nearest KERIS Delete all Find Save to card Waypoints Screen Find Save to card Load from card Return to Chart Waypoints menu Load from card Return to Chart Waypoints Load Waypoints Routes Trails Cancel Edit Edit waypoint Allows you to edit the name fe icon and latitude longitude Bm of a selected waypoint PI v L N 36 08 971
25. rt menu Installation Do you want to run Chart page the setup Wizard No New waypoint Waypoints Routes Trails Pages Settings Steer menu This unit has two pages Steer and Chart Press the pages key to switch pages Steer page 5 Basic Operation Elite 7m Accessing the Settings menu System Navigation Chart Alarms Units NMEA 0183 NMEA 2000 Simulator Accessing menu items The keypad and ENTER key are used to select menu items and open submenus Use the keypad to highlight the desired item and press ENTER System Chart data Lowrance COG extension Off Grid lines Navigation Chart Alarms Units NMEA 0183 NMEA 2000 Simulator IK Waypoints Routes BEE Trails Waypoints Routes Trails Basic Operation Elite 7m Working with menus There are several menu types used to make adjustments to options and settings including scrollbars on off features and dropdown menus Scrollbars Select the scrollbar and press the keypad left decrease or right increase On Off features Language Select the on off item and press ENTER to turn it on off Mute Audio Time Dropdown menus To input text Select the dropdown menu 1 Use the keypad to select the desired He dee s dr Advanced mo gas character and press ENTER own to select the desire item Press ENTER Tmp Spd port Tmp Spd input 2 Repeat Step
26. sert 7 gt Point using chart Edit Waypoint Add to end 9 Are you sure you want to remove NE waypoint 001 from the route Remove Goto View Stop editing DONE Route waypoint emeren Starts navigation EG menu g Leg distance bearing to the selected Latitude Longitude route waypoint To create a route from waypoint list 1 2 Press MENU from the Routes screen Select New and press ENTER Press the keypad down to select the Leg Name field and press ENTER Press MENU select Add to End and press ENTER 15 Leg Name field X Displayed emmer ko Nans Add to end Vie Waypoint from list Point using chart lew Stop editing Done 5 Highlight Waypoint from list and press ENTER 6 Select the desired waypoint and press ENTER 7 Press MENU and select Add to end to add another waypoint to the route 8 When the route is complete press MENU select Stop Editing and press ENTER 9 Select Save and press ENTER Chart Operation Elite 7m Creating a route using points from chart 1 Repeat Steps 1 4 from the instructions for Creating a route from waypoint list 2 Select Points from chart and press ENTER The chart page will appear 3 Move the cursor to the desired location Press ENTER to set a waypoint 4 Repeat Step 3 to add more route waypoints 5 Press MENU and select Stop adding Press ENTER 6 Highlight the Save button and press
Download Pdf Manuals
Related Search