LightSpeed Technologies REDCAT Classroom Audio System User's Manual
Contents
1. lightspeed Ri3DI EALE Classroom Audio System USING YOUR MICROPHONE REMOVE FROM CHARGER Lightspeed microphones require 8 hours to fully charge Interface seamlessly with computers MP3 DVD TV and other audio devices RCA mo Use your microphone to remotely connect audio to your system POSITION MICROPHONE The position of sA i me Grip the the microphone N WW barrel of the is critical for proper volume adjustment plug RCA T plug ASSISTIVE LISTENING AND RECORDING Send audio directly to an Assistive Listening Device ALD or to a digital recorder for lesson capture and Always re broadcast on school websites connect to the oan MIC or d AUX input A i jack If necessary adjust volume so you can barely hear your own voice ALD Transmitter REMEMBER Volume set too high will result in system feedback squealing a Recording D VCR ALD KG Device TURN OFF AND RETURN TO CHARGER LIGHTSPEED TECHNOLOGIES INC WWW LIGHTSPEED TEK COM 800 732 8999 Eis DI GAVE lightspeed TROUBLESHOOTING GUIDE NOTE Most problems are directly related to low battery power Please run through the Battery Check items first For remaining troubleshoot ing use known good fully charged batteries Battery Check e Confirm batteries are charged each night e Confirm proper batteries are used The REDMIKE require2. 0 732 8999 PHONE 503 684 5538 FAX 503 684 3197 WWW LIGHTSPEED TEK COM REDCAT TIPS ON CLASSROOM AUDIO Speak in a natural voice A normal conversational speech level will provide an adequate signal It is not necessary to increase the intensity of your voice the audio system provides adequate amplification approximately 5 10 dB above ambient room noises Avoid wearing jewelry that may rub or bump against the microphone parent or other classroom visitor You can also cover the LED lens on top of the REDMIKE to block the signal Recharge batteries each night When recharged nightly operating time actual usage for the transmitters will last through a typical school day 2 Turn off the REDMIKE during private conversations with a student Five year Limited Warranty Lightspeed Classroom Audio Systems are guaranteed against malfunction due to defects in materials and workmanship for a period of FIVE 5 YEARS beginning at the date of the purchase invoice If such malfunction occurs the product will be repaired or replaced at Lightspeed s option without charge during the warranty period Warranty on infrared microphones is FIVE 5 YEARS Warranty on Lightspeed rechargeable batteries all external cables and wires provided by Lightspeed is one 1 year Prepaid shipping labels are provided by Lightspeed factory or an authorized warranty service center for warranty repairs Warranty does not extend t
3. o finish appearance items or malfunctions due to abuse or operation other than specified conditions nor does it extend to incidental or consequential damages Repair by other than Lightspeed or its authorized service agencies will void this guarantee Information on authorized service agencies is available from Lightspeed Technologies Inc Our Service Department 800 732 8999 5 a m 5 p m PST will handle all your repair replacement needs LIGHTSPEED TECHNOLOGIES INC WWW LIGHTSPEED TEK COM 800 732 8999
4. s the Lightspeed BA NH2A27 sensing battery for proper charging e Make sure the REDMIKE is turned off while charging so that it will attain a full charge Full charge will last seven hours e Inspect the battery contacts Clean and adjust if necessary Hearing Static e Ensure REDCAT is in optimum location refer to REDCAT placement in manual A single REDCAT will cover a 1200 sq ft enclosed classroom Ensure that no other REDMIKE LT71 HM70 is operating on the same channel If an external microphone is in use try another REDMIKE that is known to be working if available to isolate the problem If static persists with known good microphone the REDMIKE input jack will need service Low Volume or Feedback e Ensure microphone is positioned appropriately just below the collar bone e Check volume level on the amplifier If the volume is too high feedback will occur Adjust accordingly No Sound From Speaker e Ensure the REDCAT is plugged in and is turned on Confirm that the POWER light located on the power switch is on e Confirm signal is being received at the REDCAT The IR signal light will be lit RED indicating a signal is being received e Confirm that REDMIKE is turned on There will be a BLUE LED on the microphone to indicate it is powered on MNO0007US01 0 Classroom Audio System Contact us LIGHTSPEED TECHNOLOGIES 11509 SW HERMAN ROAD TUALATIN OREGON 97062 TOLL FREE 80
Download Pdf Manuals
Related Search