Lightolier IS:40885 User's Manual
Contents
1. READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE INSTRUCTION SHEET NO This fixture is intended for installation in accordance with the National Electrical Code and local regulations To assure full compliance with local codes and regulations check with your local electrical inspector before S m 40885 installation To prevent electrical shock turn off electricity at fuse box before proceeding J Retain these instructions for maintenance reference 0998 Page 1of1 INSTRUCTION SHEET FOR INSTALLATION OF LUMINOSITIES ADA WALL BRACKET SERIES NOTE This instruction sheet covers several fixture 4 Position BACKPLATE over CROSSBAR allowing styles Backplate lamp type and diffuser assembly CROSSBAR MOUNTING SCREWS to come through may vary slightly from that shown although installa holes in BACKPLATE tion is the same CAUTION MAKE CERTAIN WIRES ARE NOT PINCHED BACKPLATE INSTALLATION BETWEEN PARTS 1 Thread CROSSBAR MOUNTING SCREWS into 5 Secure BACKPLATE in position by installing two CROSSBAR as shown Fig 1 BATTERY NUTS over CROSSBAR MOUNTING SCREWS 2 Using appropriate slots in CROSSBAR secure and tighten CROSSBAR to OUTLET BOX using OUTLET BOX 6 Install recommended lamp s SCREWS provided with OUTLET BOX While supporting BACKPLATE make connections black CAUTION MAXIMUM WATTAGE AS MARKED ON fixture lead or fixture lead without tracer marks to hot FIXTURE MUST NOT BE EXCEEDED black suppl2. y lead white fixture lead or fixture lead with tracer marks to neutral white supply lead Uninsulated DIFFUSER INSTALLATION fixture wire is a ground wire and must be connected to 1 Slide METAL FRAME of DIFFUSER ASSEMBLY over outer grounding terminal or ground lead inside OUTLET BOX edge of backplate Use WIRE NUTS local hardware item Push supply 2 Secure DIFFUSER ASSEMBLY in position by tightening wires and connections back into OUTLET BOX two MOUNTING SCREWS on DIFFUSER ASSEMBLY into holes in BACKPLATE BATTERY NUT 2 e MOUNTING SCREW METAL FRAME OUTLET BOX DIFFUSER WIRE NUT ASSEMBLY GROUND WIRE CROSS BAR CROSS BAR MOUNTING SCREW OUTLET BOX SCREW PROVIDED WITH OUTLET BOX BACK PLATE WARNING FOR SUPPLY CONNECTIONS USE WIRE RATED FOR AT LEAST 90 C WARNING RISK OF FIRE MOST DWELLINGS BUILT BEFORE 1985 HAVE SUPPLY WIRE RATED 60 C CONSULT A QUALIFIED ELECTRICIAN BEFORE INSTALLING i C gt j TO l R LIGHTOLIER a GENLYTE company m 631 Airport Road Fall River MA 02720
Download Pdf Manuals
Related Search