LG E2711PY User's Manual
Contents
1. LG Life s Good OWNER S MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference LCD MONITOR MODEL Pei y www lg com WARNING This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling Safety Precautions Please read these safety precautions carefully before using the product AN Warning Failure to follow those warnings may result in death serious injury or damage to the product or other property Q Electrical Power Related Precautions A Warning m Use only the power cord supplied with the unit or another manufacturer authorized cord Failure to do so may result in fire or electrical shock or damage to the product m Use only a properly grounded plug and receptacle If you do not you may be electrocuted or injured Or the product might be damaged Do not use a damaged or loose plug This may cause electrical shock or fire m Operate the display only from a power source i e voltage indicated in the product specification Otherwise the product can be damaged fire can occur or you may be electrocuted If you are not sure what type of power supply you have consult a certified electrician E In the presence of thunder and lightning never touch the power cord and signal cable because it can be very dangerous It can cause electric shock2. TOTAL CO2 REDUCTION 16g RESET Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values E x TOTAL POWER REDUCTION 20W 55 TOTAL CO2 REDUCTION 16g o E Exit Exit lt P Move Select another sub menu OK Select TOTAL POWER REDUCTION How much power is saved during using the monitor TOTAL CO2 REDUCTION Change the TOTAL POWER REDUCTION to CO2 On Screen Display OSD Selection and Adjustment NOTE SAVING DATA W h SUPER SAVING 6 LED SAVING Saving Data depends on the Panel So those values should be different from each panel and panel vendor LG accumulate those values using integrated function with 10 minutes broadcast video signal LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function Troubleshooting Check the following before calling for service No image appears Is the power cord of the Check and see if the power cord is connected display connected properly to the power outlet Is the power indicator Press the Power button light on Is the power indicator e If the display is in power saving mode try moving flickering the mouse or pressing any key on the keyboard to bring up the screen e Try to turn on the PC Do you see an OUT OF This message appears when
3. 3 BRIGHTNESS gt 100 ORIGINAL RATIO 4 WIDE 1 2 gt ee Nae ee ORIGINAL Change the input image signal ratio to m original O 50 i een _ ps This function works only if input resolution is lower than monitor ratio 16 9 COLOR TEMP USER RED Set your own red color levels GREEN md VOLUME CO O O A BRIGHTNESS e 00 Set your own green color levels w ORIGINAL RATIO 4 WIDE gt me 4 USER 1 2 gt OO BLUE Set your own blue color levels 50 z 50 PRESET Select the screen color e WARM Set the screen to warm color temperature e MEDIUM Set the screen to medium color temperature m dis V e COOL Set the screen to cool color m MOVE Select another sub menu pape ANG On Screen Display OSD Selection and Adjustment Main menu Description CONTRAST MENU D SUB 1024 X 768 60Hz 9 CONTRAST U Ej To adjust the contrast of the screen LANGUAGE 4 ENGLISH gt FACTORY RESET BLACK LEVEL only for DP input SAD beeen sapes sooo You can set the offset level If you select Seer a HIGH the screen will be bright and if you we BLACK LEVEL CGH select LOW the screen will be dark LANGUAGE 4 ENGLISH gt EN ETEA o Offset As the criteria for video signal it is the darkest screen the monitor can show LANGUAGE D SUB 1024 X 768 60Hz To choose the language in which the gt CONTRAST 0 control names are displayed LANGU
4. Do not connect several extension cords electrical appliances or electrical heaters to a single outlet Use a power bar with a grounding terminal designed for exclusive use with the computer A fire can break out due to overheating Do not touch the power plug with wet hands Additionally if the cord pin is wet or covered with dust dry the power plug completely or wipe dust off before plugging in the cord You may be electrocuted due to excess moisture E If you don t intend to use the product for a long time unplug the power cable from the product Covering dust can cause a fire or insulation deterioration can cause electric leakage electric shock or fire m Insert the power plug firm so it cannot come loose A loose connect can cause fire m Hold the plug when pulling out the power cable Do not pull the plug out by the wire Do not bend the power cord with excessive force or put heavy objects on the power cord The power line can be damaged which may cause electric shock or fire m Do not insert conductive material ea metal chopstick into the product opening into one end of the power cable while the other end is plugged in Additionally do not touch the power cable right after plugging into the wall input terminal You may be electrocuted m The power supply cord is used as the main disconnection device Ensure that the socket outlet shall be installed near the equipment and shall be easily accessible Do not u
5. If the monitor head touches the Stand Base then the Stand Base could crack Head section Stand SOCtION lt creeeeeeeeeeeceeeeeeeees Y Connecting the Display Connecting with the PC 1 Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices is turned off 2 Connect signal input cable 1 and power cord 2 in order then tighten the screw of the signal cable Q Connect DVI D Digital signal Cable Connect D sub Analog signal Cable Connect Audio Cable Connect DisplayPort Cable Separate purchase NOTE a This is a simplified representation of the rear view a This rear view represents a general model your display may differ from the view as shown When using a D Sub signal input cable connector for Macintosh gt MAC Mac adapter For Apple Macintosh use a separate plug adapter is needed to change the 15 pin high density 3 row D sub VGA connecior on the supplied cable to a 15 pin 2 row connector Varies according to model SS Connect the signal input cable and tighten DISPLAY it up by turning in the direction of the arrow as shown in the figure Warning a Please pull the DVI cable first then pull DisplayPort cable for protect your finger Connecting the Display 3 Press the power button on the front panel to turn the power on When monitor power is turned on
6. back of the monitor to connect peripherals USB mouse USB keyboard etc to the monitor not to the computer Two USB Downstream ports Connect these ports to a mouse USB keyboard memory stick with current spec under 100mA One USB Upstream port Connect this port to the downstream port of a computer laptop or USB monitor Your computer or USB monitor must support USB and have USB ports 2 The monitors USB terminal supports USB 2 0 and High Speed cables NOTE a This is a simplified representation of the rear view a This rear view represents a general model your display may differ from the view as shown Control Panel Functions Front Panel Controls MONITOR SETUP 3 el amp gt SUPER MENU ENERGY AUTO INPUT EXIT SAVING Q MENU Button OSD LOCKED UNLOCKED This function allows you to lock the current control settings so that they cannot be inadvertently changed Press and hold the MENU button for several seconds The message OSD LOCKED should appear You can unlock the OSD controls at any time by pushing the MENU button for several seconds The message OSD UNLOCKED should appear SUPER ENERGY Use this button to enter SUPER ENERGY SAVING SAVING Button menu For more information refer to page 22 Control Pane
7. the signal from the RANGE message on PC video card is out of horizontal or vertical the screen frequency range of the display See the Specifications section of this manual and configure your display again Do you see a CHECK This message appears when the signal cable SIGNAL CABLE between your PC and your display is not message on the connected Check the signal cable and try again screen Do you see a OSD LOCKED message on the screen Do you see OSD e You can secure the current control settings LOCKED when you so that they cannot be inadvertently changed push MENU button You can unlock the OSD controls at any time by pushing the MENU button for several seconds the message OSD UNLOCKED will appear Troubleshooting Display image is incorrect The screen color is e Check if the signal cable is properly connected mono or abnormal and use a screwdriver to fasten if necessary e Make sure the video card is properly inserted in the slot e Set the color setting higher than 24 bits true color at Control Panel Settings The screen blinks e Check if the screen is set to interlace mode and if yes change it to the recommend resolution IMPORTANT Check Control Panel gt Display gt Settings and see if the frequency or the resolution were changed If yes readjust the video card to the recommend resolution If the recommended resolution optima
8. AGE 4 ENGLISH 1 17 gt FACTORY RESET 4 NO FACTORY RESET D SUB 1024 x 768 60Hz Restore all factory default settings except CONTRAST 70 LANGUAGE Press the lt q gt buttons to reset LANGUAGE moust gt immediately FACTORY RESET 4 NO a Exit Exit 4 gt V Move Select another sub menu On Screen Display OSD Selection and Adjustment mm YOU were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons icon names and icon descriptions of the all items shown on the Menu MONITOR SETUP Press the SUPER ENERGY SAVING Button then the main menu of the OSD appears SUPER ENERGY SAVING ON OFF TOTAL POWER REDUCTION 20W Menu Name l Sub menus RESET TOTAL CO2 REDUCTION 16g Icons A Button Tip EXIT Exit u lt gt Move 4 Restart to select sub menu NOTE OSD On Screen Display menu languages on the monitor may differ from the manual On Screen Display OSD Selection and Adjustment Main menu Sub menu Description eee ON Turn on the SUPER ENERGY SAVING fuction When current setting value is ON the SUPER SAVING color is ON OFF RESET green OFF Turn off the SUPER ENERGY SAVING function Now the monitor is LED SAVING function When current setting value is OFF the SUPER SAVING color is gray TOTAL POWER REDUCTION 20W
9. GINAL RATIO COLOR TEMP MONITOR SETUP RED GREEN BLUE Press the discretionary Button then the main menu of the OSD appears To access a control use the corresponding Buttons Use the lt gt Buttons to adjust the image to the desired level Use the Button to select other sub menu items 3 4 Press the EXIT Button to exit from the OSD On Screen Display OSD Selection and Adjustment The following table indicates all the On Screen Display control adjustment and setting menus CAT D SUB Analog signal input DVI D Digital signal input BJJ DP DisplayPort signal input Main menu Sub menu Supported input Description VOLUME GST To adjust the volume 1 re Hovo 1 To adjust the brightness of the BRIGHTNESS 1 TE Bee j I l I I ae a re E a ee RE Pe EN I RS EAs Gey CRG cong pate eta aM EI ge eae BE Woes eerie a ORIGINAL RATIO 1 To adjust the image size CE 2 ee ee eee ee COLOR TEMP To customize the color of the reen USER PRESET a I I To adjust the contrast of the i screen i To customize the screen status _ for a user s operating x i environment I I I I I I Turn on the SUPER ENERGY 1 SAVING function l zela Turn off the SUPER ENERGY SAVING function Initialize the SUPER ENERGY SAVING and set to OFF mode NOTE The order of icons may differ depending on the model 18 24 On Screen D
10. ct You may be electrocuted or the product can be damaged m Make sure to remove all cables before moving the product You may be electrocuted or the product can be damaged m When lifting or moving the product do not hold it upside down while holding only the stand This may cause the product to fall resulting in damage or injury m Do not shock the product when moving it You may be electrocuted or the product can be damaged Safety Precautions m Make sure the panel faces forward and hold it with both hands to move If you drop the product the damaged product can cause electric shock or fire Contact an authorized the service center for repair Do not place the product face down This may damage the TFT LCD screen Q Precautions in Using Cleaning the Product A Warning m Do not attempt to disassemble repair or modify the product yourself Fire or electric shock can occur Contact the service center for repair m When cleaning the product unplug the power cord and scrub gently with a soft cloth to prevent scratching Do not clean with a wet cloth Or spray water or other liquids directly onto the product An electric shock may occur Do not use chemicals such as benzene paint thinners or alcohol m Keep the product away from water Fire or electric shock accident can occur m Avoid high temperatures and humidity m Do not put or store flammable substances near the product There is a danger
11. e without taking proper measures electrical shock or fire can occur m If you dropped the product or the case is broken turn off the product and unplug the power cord If you continue to use without taking proper measures electrical shock or fire can occur Contact the service center m Do not drop an object on or apply impact to the product Do not throw any toys or objects at the product It can cause injury to humans problems to the product and damage the display m Keep out of reach of children and do not place toys near the product m Make sure the product ventilation hole is not blocked Install the product more than 10cm from the wall If you install the product too close to the wall it may be deformed or fire can break out due to internal heat build up m Do not cover the product with cloth or other material eg plastic while plugged in The product can be deformed or fire can break out due to internal overheating inside the product m Place the product on a flat and stable surface that is large enough to support the product If the product is dropped you may be injured or the product may be broken m Install the product where no Electromagnetic Interference occurs m Keep the product away from direct sunlight The product can be damaged m Do not place the product on the floor Small Children and others may trip over it Precautions in Moving the Product A Warning m Make sure to turn off the produ
12. isplay OSD Selection and Adjustment ma You were introduced to the procedure of selecting and adjusting an item using the OSD system Listed below are the icons icon names and icon descriptions of the all items shown on the Menu MONITOR SETUP Press the MENU Button then the main menu of the OSD appears D SUB 1024 X 768 60Hz BRIGHTNESS gt 100 ORIGINAL RATIO 4 WIDE gt 4 gt Menu Name Icons Sub menus e COLOR TEMP USER G EEO GREEN J E Zz 50 EXIT Exit lt gt Adjust Decrease Increase SET WV Select another sub menu t Restart to select sub menu NOTE OSD On Screen Display menu languages on the monitor may differ from the manual On Screen Display OSD Selection and Adjustment Main menu Sub menu Description VOLUME MENU D SUB 1024 X 768 60Hz ad VOLUME U E 3 BRIGHTNESS gt 100 ORIGINAL RATIO 4 WIDE gt To adjust the volume of headphone Speaker COLOR TEMP 4 USER gt E 50 _ 50 50 BRIGHTNESS HENE D SUB 1024 X 768 60Hz To adjust the brightness of the screen aq VOLUME 50 3 BRIGHTNESS lt r 100 ORIGINAL RATIO 4 WIDE gt e COLOR TEMP 4 USER gt a 50 aa 50 a 50 ORIGINAL RATIO WIDE Switch to full screen mode according to MENU D SUB 1024 X 768 60Hz input image signal ad VOLUME SO
13. it on a soft cloth or a cushion to avoid surface damage 2 Separate the head and the stand with the use of a screwdriver Installing the Wall mount plate 3 Install the Wall mount plate Wall mount plate Separate purchase This is stand type or wall mount type and is connectable with Wall mount plate Please refer to the installation guide for more details which is provided when Wall mount plate is purchased Ce SA Ns CD Wall Mount pad a Ow Ay I 1 Ped 24 _ ay E T E j e VESA AxB Kensington Security Slot Connected to a locking cable that can be purchased separately at lt Screw Mounting Interface Dimension gt most computer stores Hole spacing 200 mm x 100 mm NOTE a VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications a Please use VESA standard as below 784 8 mm and under 30 9 inch Wall Mount Pad Thickness 2 6 mm Screw amp 4 0 mm x Pitch 0 7 mm x Length 10 mm 787 4 mm and above 31 0 inch Please use VESA standard wall mount pad and screws Digitally yours saan La
14. l Functions AUTO Button PROCESSING AUTO IMAGE ADJUSTMENT O INPUT Button SOURCE Hot key 5 EXIT Button O Power Button amp Power Indicator AUTO IMAGE ADJUSTMENT When adjusting your display settings always press the AUTO button before entering the On Screen Display OSD Only Analog Mode This will automatically adjust your display image to the ideal settings for the current screen resolution size display mode The best display mode is E2711PY 1920 x 1080 When two input signals are connected you can select the input signal D SUB DVI DP you want When only one signal is connected it is automatically detected The default setting is D Sub Exit the OSD On Screen Display Use this button to turn the display on or off The power indicator stays white if the display is running properly On Mode If the display is in Sleep Mode Energy Saving the power indicator is blinking white On Screen Display OSD Control Adjustment Screen Adjustment Making adjustments to the image size position and operating parameters of the display is quick and easy with the On Screen Display Control system A short example is given below to familiarize you with the use of the controls The following section is an outline of the available adjustments and selections you can make using the OSD To make adjustments in the On Screen Display follow these steps D SUB 1024 X 768 60Hz BRIGHTNESS ORI
15. l resolution is not selected letters may be blurred and the screen may be dimmed truncated or biased Make sure to select the recommend resolution The setting method can differ by computer and O S Operation System and resolution mentioned above may not be supported by the video card performance In this case please ask to the computer or the video card manufacturer Do you see an Unrecognized monitor Plug amp Play VESA DDC monitor found message Have you installed the e Be sure to install the display driver from the display display driver driver CD or diskette that comes with your display Or you can also download the driver from our web site http Awww l g com e Make sure to check if the video card supports Plug amp Play function Specifications TFT Thin Film Transistor LCD Liquid Crystal Display Panel Anti Glare coating 68 6 cm visible diagonal 27 inch 0 3114 x 0 3114 mm Pixel pitch Horizontal Freq Vertical Freq Input Form Signal Input Input Form Max Recommend 30 kHz to 83 kHz Automatic Analog Digital 56 Hz to 75 Hz Automatic DisplayPort 56 Hz to 61 Hz Automatic Separate Sync Digital 15 pin D Sub Connector DVI D Connector Digital 20 pin DisplayPort Connector RGB Analog 0 7 Vp p 75 ohm Digital DisplayPort VESA 1920 x 1080 60 Hz VESA 1920x 1080 60 Hz DDC 2B Digital DisplayPort DDC2AB Anlaog USB2 0 On Mode Sleep M
16. nplug the power cord while the product is in use Electrical shock can damage the product As long as this unit is connected to the AC wall outlet it is not disconnected from the AC power source even if the unit is turned off Safety Precautions Q Precautions in installing the Product AN Warning m Keep away from heat sources like electrical heaters curdles or other open flames Electrical shock fire malfunction or deformation may occur m Keep the packing anti moisture material or vinyl packing out of the reach of children Anti moisture material is harmful if swallowed If swallowed by mistake force the patient to vomit and visit the nearest hospital Additionally vinyl packing can cause suffocation Keep it out of the reach of children Do not put heavy objects on the product on sit upon it If the product collapses or is dropped you may be injured Children must pay particular attention m Do not leave the power or signal cable when someone can trip over it The passerby can falter which can cause electrical shock fire product breakdown or injury m Install the product in a neat and dry place Do not use near water Dust or moisture can cause electrical shock fire or product damage m Do not add accessory that have not been designed for this display m If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact the service center If you continue to us
17. ntact your dealer User s Guide Cards 15 pin D Sub Signal Cable To set it up this signal cable may be attached to this product before DVI D Signal Cable This feature is not available in all tries countries shipping out Audio Cable USB Cable Cable Holder NOTE a This accessories may look different from those shown here a User must use shielded signal interface cables D sub 15 pin cable DVI D cable with ferrite cores core in the connector to maintain standard compliance for the product Connecting the Display Before setting up the monitor ensure that the power to the monitor the computer system and other attached devices are turned off Connecting the stand base or Removing the stand base 1 Place the monitor with its front facing downward on a cushion or soft cloth 2 Align the hooks on the Stand Body with the matching slots in the Stand Base 3 Insert the hooks into slots Stand Body Stand Base Slot Connecting the Display 4 Attach the monitor to the Stand Base by turning the screw to the right Screw Turn the screw by using the screw handle 5 Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable you re attaching 6 Take the screw out by turning to the left to separate the monitor and Stand Base IMPORTANT a This illustration depicts the general model of connection Your monitor ma
18. ode Off Mode With Stand Width 64 4 cm 25 35 inch Height 45 08 cm 17 75 inch Min 56 08 cm 22 08 inch Max 40 W Typ 0 3 W 0 3 W IN IA Without Stand Width 64 4 cm 25 35 inch Height 38 72 cm 15 24 inch Depth 27 0 cm 10 63 inch Depth 6 35cm 2 5 inch Weight excl packing 7 6 kg 17 Ib Tilt Swivel Height 5 to 22 355 110 mm 4 33 inch AC 100 240 V 50 60 Hz 1 5 A Specifications Operating Conditions Temperature 10 Cto35 C Humidity 10 to 80 non Condensing Storage Conditions Temperature 20 C to 60 C Humidity 5 to 90 non Condensing Attached Detached O Wall outlet type NOTE a Information in this document is subject to change without notice Preset Modes Resolution M E2711PY Display Modes Resolution Horizontal Freq kHz Vertical Freq Hz 1 720 x 400 31 468 70 2 640 x 480 31 469 60 3 640 x 480 37 500 75 4 800 x 600 37 879 60 5 800 x 600 46 875 75 6 1024 x 768 48 363 60 7 1024 x 768 60 023 75 8 1152 x 864 67 500 75 9 1280 x 1024 63 981 60 10 1280 x 1024 79 976 75 11 1680 x 1050 65 290 60 12 1920 x 1080 67 500 60 Recommend Mode Indicator MtO B LED Color On Mode White Sleep Mode White Blinking Off Mode Off Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device 1 After moving the product to face downward make sure to place
19. of explosion or fire m Keep the product clean at all times m Take a comfortable and natural position when working with a product to relax the muscles m Take a regular break when working with a product for a long time Do not press on the panel with a hand or sharp object such as nail pencil or pen or make a scratch on it m Keep proper distance from the product and rest from time to time Your vision may be impaired if you look at the product too closely or fpr too long m Set the appropriate resolution by referring to the User s Guide Your vision can be impaired m Keep small accessories out of the reach of children m Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn in Make sure to use a screen saver on the product Burn in and related problems are not covered by the warranty on this product m Spray water onto a soft cloth 2 to 4 times and use it to clean the front frame wipe in one direction only Too much moisture may cause staining CHEMICALS On Disposal Do not dispose of this product with general household waste E Disposal of this product must be carried out in accordance to the regulations of your local authority Safety Precautions NOTE m The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the use
20. r s authority to operate the equipment NOTE m This equipment has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help NOTE m For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces Accessories Thank for selecting LGE products Please make sure the following items are included with your monitor If any items are missing co
21. the Self Image Setting Function is executed automatically Only Analog Mode z PROCESSING SELF IMAGE SETTING Power Button NOTE Self Image Setting Function This function provides the user with optimal display settings When the user connects the monitor for the first time this function automatically adjusts the display to optimal settings for individual input signals AUTO Function When you encounter problems such as blurry screen blurred letters screen flicker or tilted screen while using the device or after changing screen resolution press the AUTO function button to improve resolution Connecting the Display To arrange the cables Connect the power cord and the signal cable as shown in the figure and then fix them to the cable holders 1 and 2 1 Please insert the cable holder1 2 Please put the power cord and into the hole the signal cable in the cable holder 1 Cable holder 1 3 Please put the power cord and the signal cable in the cable holder 2 While pressing the bottom of cable holder 2 with one hand pull the top of it with the other hand as shown in the picture NOTE a Use the cable holder to organize the cables in order to use the pivot function properly This picture shows how to organize cables generally and may look different from your product Connecting the Display Connecting the USB Universal Serial Bus Cable 1 You can use the USB port at the
22. y differ from the items shown in the picture a Do not carry the product upside down holding only the stand base The product may fall and get damaged or injure your foot Connecting the Display Positioning your display After installation adjust the angle as shown below 1 Adjust the position of the panel in various ways for maximum comfort a Tilt Range Please be sure to remove the Locking pin to adjust the height Connecting the Display A a When adjusting the angle of the screen do not put your finger s in ao the head of the monitor and the stand body You can hurt your inger s a When adjusting the height of the screen do not put your finger s in T the head of the monitor and the stand base You can hurt your inger s WARNING You do not need to replace the Locking pin after it is removed to adjust its height ERGONOMIC a It is recommended that in order to maintain an ergonomic and comfortable viewing position the forward tilt angle of the monitor should not exceed 5 degrees Connecting the Display Using the Pivot function The pivot function allows you to rotate the screen 90 degrees clockwise 1 Lift the monitor to its highest height to utilize the Pivot function 2 Landscape amp Portrait You can rotate the panel 90 clockwise Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function
Download Pdf Manuals
Related Search