Kohler K-19896 User's Manual
Contents
1. Installation toilet supply shank Water Supply Hose Bottom Inlet Type 8 Connect the supply shut off valve to the supply hose and connect supply hose to Water Supply Hose Rear Inlet Type 9 Incistern Rear Water Inlet K 19896 Rear Water Inlet K 3735 K 4346 Bottom Water Inlet K 3736 Tank Hose Stop Valve Bottom Water Inlet Optional 148794A NA Kohler Co 5 1102602 A2 A Install the Push Buttons 1 Remove the tape and protective pad protective pad Tank Cover 2 Press down on the large button 3 Pull out and remove the small button pa 5 Press the large button on to the black rod Large Button PP S Black Rod 6 Press the small button on to the green rod A smal Button G reen Rod T Insert the rod into the holes in the push button housing 8 Press down on the push buttons until they click into place 1102602 A2 A Kohler Co Install Flush Valve 1 Release flush valve by turn right and pull straight up on the canister Kohler Co 7 1102602 A2 A THE OF New Zealand Kohler New Zealand Ltd Phone 64 9 980 6888 0 800 100 382 Fax 64 9 980 6899 Australia Kohler Co Phone 61 1300 362 284 Fax 61 1300 652 284 BOI DLOOK KOHLER 2008 Kohler Co 1102602 A2 A2. Installation amp User Guide Dual Flush Toilet EBOLDIOOK KOHLER OT 1102602 A2 A Tools and Materials A amp EO A 10 Adjustable Supply Tape Level Sponge Pipe Wrench Wrench Shut Off Measure Valve NY Plus FJ N e Connector JA Metal File Safety Drill and e 1 2 Nut Driver Socket Tubing Cutter Glasses assorted bits e Hacksaw e Screwdriver Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality Please take a few minutes to review this manual before you start installation If you encounter any installation or performance problems please don t hesitate to contact us Our phone numbers are listed on the back cover Thanks again for choosing Kohler Company Before You Begin CAUTION Risk of personal injury or product damage Handle with care Vitreous china can break or chip if the product is handled carelessly O Observe all local plumbing and building codes O Carefully inspect the new toilet for damage O If the existing toilet does not have a supply shut off valve below the cistern install one before installing the new toilet 1102602 A2 A 2 Kohler Co Installation 1 Remove the existing toilet Turn off the water supply and flush the toilet then sponge out all remaining water from the cistern Disconnect the supply shut off valve ifpresent and remove the old pan and cistern CAUTION Risk of hazardous gases If the new to
3. ilet is not installed immediately temporarity stuff a rag in the closet flange 2 Define the position of connector Place the connector onto the pan position between outlet and waste pipe Case 1 N Finished Case 2 N Finished Wall N Wall Connector a ____ Waste Pipe L N Connector min 90mm max 150 mm For this model there are two types of connector You can choose one of the above pictures which is most suitable to your local plumbing and building codes 3 Position the template on the floor to ensure the rear pan against the wall Mark the mounting hole centerline on the floor Connector to Wall Connector to Floor Kohler Co 3 1102602 A2 A Installation 4 Drill 3 8 10 mm mounting hole 5 Install thewasher and insert the hexagon between the mark locations on the screw into the bracket then tighten the floor and insert the anchor screw Hexagon Lag Screw Washer Anchor 6 Install the sleeves tighten the screw and attach the caps Hole 0 a Sleeve P Screw T Position the cistern on the pan by centering the gasget on the pan inlet Assemble the retaining washer and sealing washer to the screw Securely tighten the screws so the cistern is level Retaining Plan Gasket Washer 1102602 A2 A 4 Kohler Co
Download Pdf Manuals
Related Search