Kodak K7600-C User's Manual
Contents
1. Approximate charging times for fully discharged batteries KLIC 5000 170 min KLIC 5001 260 min KLIC 7000 KLIC 7001 90 min KLIC 7002 75 min KLIC 7003 160 min KLIC 7004 160 min KLIC 7005 85 min KLIC 7006 95 min KLIC 8000 210 min Using the Car Adapter Plug Connect the car adapter plug to the bottom of the charger base then plug the other end into your car s 12V socket NOTE Unplug the charger from the 12V socket when the car is not running as the charger may draw current and drain the car battery Troubleshooting e No indicator lights Confirm that the AC adapter or car adapter plug is firmly connected to the charger and either the wall outlet or 12V socket If using the car adapter plug confirm whether the ignition needs to be on Power light only Battery is already fully charged Battery is inserted incorrectly Remove and insert battery correctly Dirt on contacts Clean battery and charger contacts e Power and Charge Status indicators both blink Battery is defective Replace battery e Hissing noise in charge mode Normal operation due to advanced switching circuitry Technical Specifications Input voltage 100 240V 50 60 Hz 280mA Output voltage DC 12V 700mA 8 4VA IMPORTANT SAFETY INSTRUCTIONS Save These Instructions e DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAREFULLY FOLLOW THESE INSTRUCTIONS e For connection to a supply not in the U S A use an attachment plug adapte2. Model K7600 C Compatible with KODAK Li lon Rechargeable Digital Camera Batteries KLIC 5000 KLIC 5001 KLIC 7000 KLIC 7001 KLIC 7002 KLIC 7003 KLIC 7004 KLIC 7005 KLIC 7006 KLIC 8000 Kodak KODAK Li lon Universal Battery Charger Operating Instructions Li lon UNIVERSAL Kodak BATTERY CHARGER 2 F6782 Use the KODAK Universal Li lon Battery Charger to charge KODAK Li lon Rechargeable Digital Camera Batteries Features e Automatic polarity detection e Top off charging for a full charge e LED indicator displays charging mode e Timer protection e Overcharge protection e Abnormal battery detection indicates faulty battery and halts charging Operating Instructions 1 Snap the charging plate into the charger base Charging Plate Charger 3 Connect the AC adapter to the bottom of the charger base then plug into a wall outlet 4 Pull down and hold the battery support then insert the battery so it rests against the stop at the right side of the charging plate The 2 pins on the charging plate must touch the 2 outer contacts on the battery NOTE The charger automatically determines the correct polarity 5 Gently release the battery support to hold the battery securely in place during charging LED Indicators Blinking amber charging Steady amber battery charged Amber 3 6V battery installed Green 7 2V battery installed Green power on Blinking green red error
3. nt generates uses and can radiate radio frequency energy and if not installed or used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 reorient or relocate the receiving antenna 2 increase the separation between the equipment and the receiver 3 connect the equipment to an outlet on a circuit different from that to which the receiver is connected 4 consult the dealer or an experienced radio TV technician for additional suggestions Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product they must be used in order to ensure compliance with FCC regulation
4. r of the proper configuration for the power outlet This battery charger is intended to be correctly oriented in a vertical or floor mount position CAUTION e Charge only compatible Li lon rechargeable batteries Other types of batteries may burst causing personal injury and damage e Risk of electric shock Use only in dry locations e Do not operate charger if it has been damaged e To reduce the risk of electric shock unplug charger from outlet before attempting any maintenance or cleaning e Be sure to use charger with correct voltage AC 100 240V e Do not insert any objects such as a screwdriver or metal wires into the charger e Do not modify or disassemble e If something appears wrong with the charger and or batteries disconnect from the electric outlet immediately e Keep out of reach of infants Children may use only under strict parental supervision e Store in a dry cool place Recommended temperature ranges for use a To use discharge the batteries 32 122 F 0 50 C To charge the batteries 32 95 F 0 35 C To store the batteries Regulatory Information 4 86 F 20 30 C FCC compliance and advisory This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipme
Download Pdf Manuals
Related Search