Kobe Range Hoods CH7730SQ User's Manual
Contents
1. Impeller Impeller Impeller Impeller Control Button 6 6 6 6 Duct Freee e e e Oil Container 22 4 4 4 4 Accessories J Additional Purchase _Back panel e e e 6 Round Charcoal Filter e e e e Multi Duct Exhaust 6 Round Topp e e e e T Round Top e e e e 34 x 10 Top e e e e 34 x 10 Rear poe gt e When used with optional 6 round charcoal filter CH 177 Models Konn CFM A Sone 127W 154W 168W 205W SP 3 1 Sone is equivalent to sound of a refrigerator at 40 decibels 14 1 2 3 4 DISCLAIMER CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING DELIVERY NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS RECEIPT REQUEST SIGNATURE OF THE CARRIER S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM Upon acceptance by the carrier he she assumes responsibility for its safe arrival Damages should be reported to carrier and a claim filed Failure to do this could result in the carrier refusing to honor your claim The carrier will furnish you with necessary forms for filing a claim DAMAGES CAUSED DURING TRANSIT WILL NOT COVERED UNDER OUR WARRANTY PLEASE INSPECT CONTENTS OF PACKAGE S CAREFULLY UPON RECEIVING We must be notified in writing of any damages and or missing parts within the allocated days upon receipt of pa2. fitness for purpose imposed on the sale by the laws of the state of sale are limited to two years from the date of original purchase Some states do not allow limitations on the duration of implied warranties This warranty gives you specific legal rights and may have rights that vary from State to state SERVICE For service contact Should you require technical assistance please call your dealer or KOBE Range Hoods KOBE Range Hoods 1039 South San Gabriel Blvd San Gabriel CA 91776 Tel 1 626 309 1356 Monday thru Friday 9 a m to 5 p m Pacific Standard Time Excluding holidays amp company off days Email info koberangehoods com www koberangehoods com 17
3. steel cleaner To clean hood fans turn on high speed and spray a mild degreaser into the fans Liquid residue will accumulate in the oil containers located at the back of the safety screen These slide easily in and out for cleaning The round transparent holders attached to the fan cover can be unscrewed turn counterclockwise for cleaning To replace just screw back in turning clockwise until it clicks mto place To clean the fan safety screen remove the screw leave in a safe place and slide safety screen out Both oil containers and fan safety screen should be washed with warm soapy water and completely dry before returning in place Both are top rack dishwasher safe CAUTION Never put your hand into the area housing the fan while the fan is operating For the most efficient operation of your range hood clean the range hood surface fans and optional filters regularly CAUTION Drain oil holders before oil can overflow Changing the Light Bulb 1 Make sure all control switches are off and range hood 16 unplugged CAUTION Wait until light is cool to the touch before changing 2 Use a flat head screwdriver to pop out the protective covering 3 Gently pull out the defective halogen light and discard Plug in new halogen light 12V 20W max 4 Replace protective cover 5 Plug in range hood Keyhole 12V20W Troubleshooting Guide Problem Solution Light does not turn on e Check power 15 plugged in e Check lig
4. the black power wire to the black wire and the white power wire to the white wire located in the electrical wiring compartment Align any frayed strands or conductors Screw on conductors push wires firmly into connectors when starting Stop when the bottom of the connector reaches conductor Follow all codes 4 Plug into electrical outlet Turn on power and check operation of fans and light White Wire Neutral Black Wire Power Fig 7 Green Wire Ground Congratulations your KOBE range hood 16 ready to use OPERATING INSTRUCTIONS This KOBE hood 15 equipped with a 10 second time delay operation four control buttons located on the front of the hood powerful centrifugal turbine impellers with safety screen covers bright 12 volt 20 watts halogen lights and 4 oil containers The four control buttons from left to right are the Light Control the Speed Control cycles through Low Medium High QuietMode alternate Speed Control cycles through Low QuietMode High Medium and the Power Control buttons Turn On 1 Press Power Control button If another control button is not pressed within 10 seconds power will turn off automatically 2 Press either Speed Control button once will start on Low speed for fan control See Fig 4 3 Press Speed Control button to cycle from QuietMode through high speed See Fig 4 4 Press Light Control button to turn light on Turn Off 1 Press Power Control button on
5. ITH ANY SOLID STATE SPEED CONTROL DEVICE INSTALLING THE RANGE HOOD Keep all packing materials for return or exchange Temporarily wire the hood to test for proper operation before installing Before installing please peel protective film off the hood first if any NOTE The recommended distance from range hood bottom to top of the cooking surface is between 28 30 Fig la Fig 1b Fig lc WARNING As the hood is heavy we strongly recommend using all 8 mounting holes to install the hood Installation may require more than 1 person For Mounting on a Cabinet with a Flush Bottom 1 If you need to move the cooking range to work on the cabinet turn off the power for an electric range at the main electrical box SHUT OFF THE GAS BEFORE MOVING A GAS RANGE 2 To make an electrical line access opening please refer to section Electrical Power Line Access 3 Use 1 wood screws for mounting the hood Puncture the eight indented mounting holes Measure amp create access opening for electrical wires under the cabinet 4 a For top venting Cut rectangle opening required for 6 7 or 3 X 10 duct Remove temporary plastic vent cover on the top of the hood Replace with the plastic multi duct exhaust vent piece that came with the hood Cut along the indented outline for the size of the duct opening that you need Fig 2 Fasten plastic multi duct exhaust vent piece with the raised surface facing outward
6. KOBE KOBE Brand Range Hood CH 177 Models CH7730SQ CH7736SQ CH7742SQ CH7748SQ Professional Style Range Hood INSTALLATION INSTRUCTIONS AND OPERATION MANUAL READ AND SAVE THESE INSTRUCTIONS READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING ALL WIRING MUST BE DONE BY A PROFESSIONAL AND IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PERSONAL INJURY OBSERVE THE FOLLOWING 1 Installation work and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards including fire rated construction 2 When cutting or drilling into wall or ceiling be careful not to damage electrical wiring or other hidden utilities 3 Ducted fans must always be vented to the outside a Before servicing or cleaning unit open the light panel and SWITCH POWER OFF AT SERVICE PANEL b Clean fan optional filter and grease laden surfaces frequently To reduce the risk of fire and to disperse air properly make sure to vent air outside DDO NOT vent exhaust air into wall spaces attics crawl spaces or garages NOTE This warranty is invalid without an authorized agent s receipt or unit is damaged due to misuse poor installation improper use mistreatment negligence or any other circumstances beyond the control of KOBE RANGE HOODS authorized agents Any repair
7. accident incorrect installation or failure to follow the operating instructions 11 connected to improper inadequate or faulty electricity service or exhaust ducts or flues or operated using incorrect or contaminated lubricants 111 installed maintained or operated otherwise than in accordance with the instructions furnished by KOBE Range Hoods including the improper use of detergents bleaches cleaners or other additives g For damage to the range hood during transit delivery installation or removal h Damaged by or resulting from attempted repairs conducted by anyone other than our Authorized Service Agent 3 The purchaser shall be responsible for any expenses involved in making the range hood readily accessible for servicing and where the range hood 1s installed outside the main sales territory of the retailer or service territory of the nearest approved KOBE Range Hoods Agent as applicable for any traveling expenses and any costs of transporting the range hood or parts thereof to and from the dealer or Service Agent 4 The purchaser must produce proof of purchase together with this warranty certificate when making the claim 16 CONSEQUENTIAL DAMAGE The warrantor 1s not responsible for any consequential damage SOME STATES DO NOT ALLOW THE EXCLUSION OF CONSEQUENTIAL DAMAGE SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU IMPLIED WARRANTIES STATE LAW Any implied warranties including the implied warranty of merchantability and
8. back onto the top of the hood See Fig 2 qo 6 Fig 2 Multi Duct Exhaust Base included Remove Temporary vent cover b For rear venting Unscrew the rectangular plastic vent portion at the back of the hood Fig 4 Turn the vent piece over so that the flat surface is facing you Cut along the indented outline until there is a 3 4 X 10 opening Fasten plastic vent piece with the raised surface facing outward back onto the hood a g SU Fig 4 Fig 5 Rear Venting 5 Remove bottom panel amp carefully place aside 6 Take the hood place electrical power line through access opening Fig 1b and use eight 1 wood screws for mounting the hood Fig le CAUTION MAKE SURE THE HOOD IS SECURE BEFORE RELEASING 7 Replace bottom casing 8 Slide each oval oil container into the oil container slots at the back of the safety screen Fig 5 9 Finally place a round oil container with the three prongs into the larger holes in the specially made openings in the center of the screen amp turn clockwise until it snaps into place Do the same for the other round oil container Fig 6 For Mounting on a Cabinet with a Recessed Bottom 1 If you need to move the cooking range to work on the cabinet turn off the power for an electric range at the main electrical box SHUT OFF THE GAS BEFORE MOVING A GAS RANGE 2 Measure the space under the cabinet between the inside front edge and in
9. carried out without the supervision of KOBE RANGE HOODS authorized agents will automatically void the warranty KOBE RANGE HOODS will not hold responsible for any damages to personal property or real estate or any bodily injuries whether caused directly or indirectly by the range hood CAUTION FOR GENERAL VENTILATION USE ONLY DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS TO REDUCE THE RISK OF FIRE USE ONLY METAL DUCTWORK SUFFICIENT AIR IS NEEDED FOR PROPER COMBUSTION AND EXHAUSTING OF GASES THROUGH THE FLUE CHIMNEY OF FUEL BURNING EQUIPMENT TO PREVENT BACK DRAFTING FOLLOW THE BEATING EQUIPMENT MANUFACTURER S GUIDELINE AND SAFETY STANDARDS SUCH AS THOSE PUBLISHED BY THE NATIONAL FIRE PROTECTION ASSOCIATION NFPA AND THE AMERICAN SOCIETY FOR HEATING REFRIGERATION AND AIR CONDITIONING ENGINEERS ASHRAE AND CODE AUTHORITIES IMPORTANT SAFETY INSTRUCTIONS WARNING TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE TOP GREASE FIRE Keep fan optional filter and grease laden surfaces clean Always turn hood ON when cooking at high heat Use high settings on cooking range ONLY when necessary Heat the oil slowly on low to medium setting Do not leave cooking range unattended when cooking Always use cookware and utensils appropriate for the type and amount of food preparing Use this unit only in the manner intended by the manufacturer Before servicing switch power off at service pan
10. ce panel lights will flash for 10 seconds before power will completely shut off 2 Press Power Control button twice all power will shut off immediately 3 Ifonly lights are on pressing Power Control button once will turn power off immediately The QuietMode feature offers continuous ventilation at a greatly reduced noise level Light Control Speed Control Cycles through Low Medium High QuietMode Speed Control Cycles through Low Quiet Mode High Medium Power Control Fig 4 MAINTENANCE OF THE HOOD SAFETY WARNING INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES PLEASE WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE HOOD FOR CLEANING OR SERVICING Cleaning To clean the hood surface use only mild soap or detergent solutions Dry up surfaces using soft cloth CAUTION Never use abrasive cleaners pads or cloths If the hood looks splotchy stainless steel hood use an orange base cleaner to clean the surface of the hood make sure the cleaner does not get on any control switches Spread a light coating over the surface of the hood and leave on for a few minutes do not leave on too long or there might be damage to the hood finish Use a soft towel to wipe off the cleaning solution gently rubbing any stubborn spots Use a slightly damp towel to get rid of any cleaning solution Use a dry soft towel to dry the hood To bring the glow back into a stainless steel finish use a stainless
11. ckage s Contact your local KOBE dealer or distributor or call KOBE for the time limit CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS NOTE This item was thoroughly tested and carefully packed in our factory Products must be returned m good working condition with ALL original parts amp documentation packed in ALL original cartons fillers amp shipping cartons A restocking fee of 25 may be different at time of return will be charged for all returned items with any missing parts or documentation EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS MISSING BE SURE TO INSPECT THE HOOD FOR DAMAGES AND DEFECTS BEFORE INSTALLATION Appearance flaws of the hood found after installation and not affecting hood performance 15 not covered under our warranty for returns or exchanges Service visits not covered under warranty will carry a service charge YOUR CLAIM FOR CONCEALED DAMAGE MUST BE REPORTED WITHIN FIFTEEN 15 DAYS OF DELIVERY YOU MUST BE ABLE TO PROVE UNIT WAS DAMAGED WHEN YOU RECEIVED IT A Before Installation Return for exchange or refund please see above for acceptable returns B After Installation NO exchange or refund 15 WARRANTY CERTIFICATE KOBE Range Hoods warrants all products manufactured or supplied by it to be free from defects in workmanship and materials Its obligations pursuant to this warranty are limited to a period of two years from the date of purchase and to the repair or replac
12. el and lock service panel if possible to prevent power from switched on What to Do In The Event Of A Range Top Grease Fire 1 SMOTHER FLAMES with a close fitting lid cookie sheet or metal tray then turn off the burner KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES If the flames do not go out immediately EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911 2 NEVER PICK UP A BURNING PAN You may get burned 3 4 DO NOT USE WATER including wet dishcloths or towels a violent steam blast will result Use an extinguisher ONLY 1f a You know you have a Class ABC extinguisher and you already know how to operate tt b The fire is small and contained in the area where it started c The fire departments have called d You can fight the fire with your back to an exit What to Do If You Smell Gas Extinguish any open flame Do not try to turn on the lights or any type of appliance Open all doors and windows to air out any amount of gas Call the Gas Company and Fire Department right away CAUTION Turning on any switch may cause ignition or an explosion CONTENTS OF RANGE HOOD PACKAGE Must keep all materials for returns or refunds 1 KOBE Range Hood 2 Two Impeller Safety Screen 3 Two Round and Two Oval Oil Containers 4 Halogen Lights 12V20W 5 One Plastic Multi Duct Exhaust Base 6 Round 7 Round or 3 x 10 Options 6 Installation Owner s Manual amp Warranty Card 7 Packa
13. ement at its option and subject to the terms and conditions stated below of any component part which its examination shall disclose to be so defective TWO YEAR WARRANTY SERVICE PERIOD Any covered failure occurring within two years of origmal purchase arising from defective workmanship or material in manufacture will be repaired or at our option the unit will be replaced free of charge by an authorized KOBE Range Hoods Agent or KOBE Range Hoods as applicable Keep proof of purchase or origmal invoice handy for inspection If the original purchaser sells the range hood during the warranty period the new owner 5 protected until expiration of the original purchaser s warranty CONDITIONS The following conditions apply only in relation to the warranty expressly given in this certificate 1 This warranty applies only a Within U S A and Canada b To range hoods used for PRIVATE SINGLE FAMILY USE if used for COMMERCIAL or MULTIPLE FAMILY USE or other purposes warranty 1s void 2 Repair of any fault to be provided under this warranty shall not be provided a Ifthe identification number attached to the range hood has been altered rendered illegible or removed b Ifnotice of the defect has not been given within the period applicable c For failure of light bulbs d For physical damage e For surfaces damaged by use of improper chemical cleaning agents f Ifthe range hood has been 1 subject to misuse abuse negligence
14. ging Materials May Include a Plastic Bag To Cover Hood b Styrofoam c Outer carton Unpack hood and check contents before installing Oil Cups Plastic Exhaust Owners Manual Warranty Card Duct PREPARING THE INSTALLATION LOCATION SAFETY WARNING INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES PLEASE WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE HOOD FOR CLEANING OR SERVICING NOTE TO AVOID DAMAGE TO YOUR HOOD PREVENT DEBRIS FROM ENTERING THE VENT OPENING Make sure the surface of the wall is clean and free of debris Providing Electrical Power Line Access SHOULD BE DONE BY A LICENSED PROFESSIONAL 1 If there is no electrical power line access opening you will need to make an opening first before you can proceed further To make an electrical power access opening mark an outline for the opening on the cabinet bottom Use a 114 wood bit to form the access opening Fig 1 CAUTION Be careful when operating the electric drill Electrical power access Fig 1 SAFETY WARNING IF DRILLING INTO THE WALLS BE CAREFUL NOT TO CUT EXISTING ELECTRICAL CABLES WHICH WOULD CREATE A HAZARD ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL CODES ORDINANCES OR NATIONAL ELECTRICAL CODE IF YOU ARE UNFAMILIAR WITH METHODS OF INSTALLING ELECTRICAL WIRING SECURE THE SERVICES OF A QUALIFIED ELECTRICIAN CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DO NOT USE W
15. ht bulb Fan is not turning e Check power is plugged in e Check electrical wires if connected correctly e Check for loose wires e Check switch 10 CIRCUIT DIAGRAM CH 177 Models a R CAPACITOR 3 543 5uE 2S50VAC 2 toro POWER RECEP OCLE GRA Gow 200 BROWN Bert 3 BROWN BLUE vw ai OUT AC12V60W ELECTRONIC CONVERTER L 120VAC m VO ORAN ORANGE BLUE GREEN YELLOW ED BLUE BLUE me M 0 Oe gt OG m lt gt Bp O gt 11 PARTS O N 28 QW amp gt 12 PARTS LIST ae kl ba AA a ke DA kI knn A ki Plastic Vent Cover Screw 29 aew i kon DAN kaa Motor 29 Capacitor ki Turbine Impeller Processor Board Box 10 Oil Tunnel Ring 31 Processor Board Oil Tunnel Round Head Screw TS 3 x 15 13 Rear Oil Container 34 Motor Position Screw 14 Impeller Safety Screen 35 Round Head Screw TS 4 x 12 Oil Container for Safety Screen Bottom Casing Screw 3 16 x 24 16 Power Cord 37 Impeller Plastic Cover ka koi JA 00002 A kad nn na ba na 13 SPECIFICATION Sie w e e e 30 x 22 x9 36 x22 x9 42 x 22 x9 48 x 22 x 9 Features o Stainless Steel 304 e e e
16. side back edge Fig 3 With a saber saw cut wood filler strips not included to fill in the bottom of the cabinet Use 2 1 4 long wood screws not included to attach wood strips to the cabinet Make sure you have wood filler strips for all eight mounting holes For metal cabinet use 3 8 x 2 1 2 bolts and nuts to secure the strips to the cabinet The hood will mount on these filler strips For a more secure installation you can also use screws from inside the cabinet down into the wood filler strips Make sure the filler strips do not cover the electrical power line access opening Fig 3 3 Follow installation instructions from the section For Mounting on a Cabinet with a Flush Bottom Making The Electrical Connection SHOULD BE DONE BY A LICENSED PROFESSIONAL SAFETY WARNING INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES PLEASE WEAR PROTECTIVE GLOVES IF YOU HAVE TO OPEN THE HOOD FOR CLEANING OR SERVICING CAUTION MAKE SURE ELECTRICAL POWER IS TURNED OFF BEFORE STARTING THIS SECTION 1 After turning off the electrical power at the main power source push the electrical power line through the access opening drilled earlier in the wall or bottom of the cabinet There are three different color wire strands to be connected Strip solid wire 5 16 and strip stranded wire 3 8 2 Connect the power line wire to the grounding green lead supplied with the hood 3 Make the electrical connections by fastening
Download Pdf Manuals
Related Search