Knoll Systems WLR-02 User's Manual
Contents
1. Warranty Knoll Systems warrants WLT 02 and WLR 0O2 s sold in the USA and Canada by authorized Knoll dealers to be free of defects in materials and workmanship This warranty extends for three full years from the date of purchase by the original consumer Any products returned to Knoll Systems and found to be defective by Knoll Systems within the warranty period will be repaired or replaced at Knoll Systems option at no charge Knoll Systems will not be responsible for the actual cost of installation or removal of the product nor for any incidental or consequential damages Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you This warranty gives you specific legal rights You may have additional legal rights that vary from state to state Specifications 20 Hz 20 kHz Transmission frequency 2400 mHz 2483 mHz Frequency response Distortion 0 3 1 kHz SNR 95 dB Transmitter output 0 18 dBm Transmitter power 36 6 VDC Dimensions 3 1 2 x 2 3 4 x 1 89 x 70 x 25 mm Knoll Systems 145 Tyee Drive Point Roberts WA 98281 14 7163 Vantage Way Delta BC V4G 1N1 Tel 604 940 1689 fax 855 734 3363 Made in China knoll WLT 0O2 WLR O2 knall Wireless stereo 2 4 GHz 30 channel system Installation Instructions v1 0 Warning To be installed and or used in accordance with appropriate electrical codes and regulations Description T2. ck cord or plug it directly into headphones Plug the 5 VDC power supply into the power outlet with the WLR 02 power switch in the off position Connect the WLT O2 transmitter to the stereo source using the supplied RCA to 3 5mm stereo cord provided or another cord Plug the 3 5 mm stereo jack into the WLT O2 jack labeled AUDIO Plug the 5 VDC power supply into the power outlet with the WLT 02 power switch in the off left position Operation Turn the stereo source music iPod CD player stereo receiver etc on to a mid comfortable volume setting if it has a control Move the switch on the rear of transmitter two clicks right to the ON position Turn the WLR O2 receiver power switch to the on position If this transmitter is the only one in the area change the transmitter using the remote or the WLT 02 CHANNEL SELECT push buttons to channel 25 In most stand alone systems we suggest starting with channel 25 as this is at the high end of the WI FI band and is generally less used by other WI FI users If a great deal of interference is detected this system is designed to temporarily mute or dip out If this happens repeatedly try experimenting with other channels Turn the WLT 02 volume using the pushbuttons or remote control until it is mid way about level 16 of 32 Make sure the WLT 02 gain set switch is in the left MUSIC position Turn the WLR 02 receive volume up to about level 16 of 32 Next change the WLR 02 channels to t
3. he WLT 02 transmitter and WLR 02 receiver are state of the art feature packed stereo wireless transmission systems This system boasts a 64k sampling rate higher than CD s 44 1k quality and 2 4 GHz transmission When multiple stereo transmissions are required up to 30 WLT WLR s can operate at the same time in the same space without sound quality or overlap issues The WLT WLR system can go thorough most walls and be reliable up to 100 30 m and 150 45 m outdoor line of sight The shorter the transmission distance the more reliable it will be Transmitter remote control included e Small size fits almost anywhere Up to 30 different stereo channels can operate in the Same space at the same time e Transmission distances up to 100 30 m e Super high quality due to 64k sampling rate with a latency of less than 0 5 msec e Transmitter remote control included Installation The maximum transmission distance can vary depending on several factors including how much WI FI traffic is taking place in the space at any given time and how much iron and steel is nearby The rule of thumb is a maximum of 100 30 m through walls and 150 45 m outdoor in direct line of sight In certain instances this system will encounter so much interference it may not work at all We always suggest experimenting to see if it will work satisfactorily Connect the Knoll WLR O2 to a stereo amplifier with the included 3 5mm to RCA ja
4. he same as the transmitter channel 25 You should now be able to hear the source Adjust the volume to a comfortable level and enjoy Try experimenting with the transmitter and receiver volume settings until the best quality sound is produced A ANTENNA 3 6 6 VDC POWER GAIN SET POWER INPUT SWITCH SWITCH Stand by 0d B ae OFF Lon MUSIC MIC POWER INFRARED STEREO CHANNEL ST RECEIVER INPUT Ye DQVIN SELECT UP DOWN Fig 2 WLT 02 TRANSMITTER The Knoll tech support line is 604 272 4555 and is available from 8 30 to 5 PM Monday to Fridays Pacific time
Download Pdf Manuals
Related Search