KitchenAid KUDH03DT User's Manual
Contents
1. KitchenAid Drawer Dishwasher PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS KUDHO3DT Electrical 120 volt 60 Hz AC only 15 or 20 amp fused electrical 24 233 supply Use copper wire only A time delay fuse or circuit breaker and 61 cm ie separate circuit is recommended Waiter A hot water line with 20 to 120 psi 138 to 862 kPa water pressure Water temperature must be 120 F 49 C at dishwasher Use flexible stainless steel braided fill line 1 2 1 3 cm minimum plastic tubing not recommended Drain Requirements Use the new drain hose supplied with your dishwasher If this is not long enough use a new drain hose with maximum length of 12 ft 3 7 m that meets all current AHAM IAPMO test standards is resistant to heat and detergent and fits the 1 2 5 cm drain connector of the dishwasher 33 85 7 cm Connect drain hose to waste tee or disposer inlet above drain trap in house plumbing and 20 50 8 cm minimum above the floor It is recommended that the drain hose either be looped up and securely fastened to the underside of the counter or be connected to an air gap Use a drain air gap if the drain hose is connected to house plumbing lower than 20 50 8 cm above the subfloor or floor Use 1 2 1 3 cm minimum I D drain line fittings CUTOUT DIMENSIONS PREFERRED UTILITY AREA ss z 1 n 1 3 cm 25 A Choose left hand or right hand drain and water connection2. route B Choose left hand or right hand electric connection route NOTE All holes should be drilled at 1 3 8 cm diameter Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only For complete details see Installation Ref W10185042 our products we reserve the right to change materials and specifications without notice Instructions packed with product Specifications subject to change without notice 08 27 08
Download Pdf Manuals
Related Search