Kenwood KCH-14 User's Manual
Contents
1. Description Displays the operating zone and channel numbers or zone and channel names Also displays various text messages depending on the function being used Displays various characters depending on dealer settings Appears when a received call is using optional signaling Appears when the Monitor function is active and when the transceiver squelch is open Appears when you are using Scan mode Appears when the external speaker function is activated Appears when the Scrambler or Encryption function is activated Appears when the AUX A function has been activated Appears when the AUX B function has been activated Appears when the AUX C function has been activated Appears when using the Operator Selectable Tone function Appears when there is a FleetSync message stored in the transceiver memory Flashes when a new FleetSync message has arrived Appears when the selected zone left icon or channel right icon is added to the scanning sequence Appears when the Auto Recording function on the VGS 1 option is activated Appears when the Auto Reply Message on the VGS 1 option is activated The location of this icon is the same as the Auto Recording icon The numbers of bars indicates the strength of incoming signals The antenna plus 3 bars represents a strong signal while only the antenna represents a weak signal No antenna means no signal is present Flashes when out of range Display Use of the KCH 16 transceiver wh2. CC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can generate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that the interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer for technical assistance PRECAUTIONS Observe the following precautions to prevent fire personal injury and KCH 16 transceiver damage Do not drop the KCH 16 strong impacts can damage the internal components Do not over stress the KCH 16 cable by pulling on it with excessive force Do not attempt to configure the KCH 16 transceiver while driving it is too dangerous Do not disassembl
3. FF w Display e Right Zone Up key Press to increase the zone number Default setting Also press to increase setting adjustments r Left Zone Down key Press to decrease the zone number Default setting Also press to decrease setting adjustments t VOL Volume control Rotate clockwise to increase the volume level Rotate counterclockwise to decrease the volume level y DTMF keypad Press the keys on the keypad to make DTMF calls The default setting is None no function u Up Channel Up key PF 6 Programmable Function key Press to increase the channel number Default setting Your dealer can also enable the CH key to be used when making setting adjustments as an optional method for using the Right key i Down Channel Down key PF 7 Programmable Function key Press to decrease the channel number Default setting Your dealer can also enable the CH key to be used when making setting adjustments as an optional method for using the Left key o S A B C Orange Programmable Function keys Press to activate their programmable functions The default setting is None no function 0 TX BUSY indicator The TX BUSY indicator lights red while transmitting and green while receiving PTT Push To Talk switch Press and hold this switch then speak into the microphone to call a station HOOK Key name function comparison in regards to the KCH 14 KCH 15 Indicator
4. HANDHELD CONTROL HEAD INSTRUCTION MANUAL KCH 16 THANK YOU We are grateful you have chosen Kenwood for your mobile applications We believe this easy to use handheld control head will provide dependable communications to keep personnel operating at peak efficiency Only basic operations are explained in this instruction manual For a detailed explanation on the operations refer to the Transceiver s instruction manual FEATURES The KCH 16 is a full control optional microphone for use with the TK 5710 5810 P25 FM analog Dual Mode transceiver By connecting the KCH 16 to the optional KRK 11 handheld control head interface kit you can control the transceiver using the microphone in the same way that the KCH 14 15 can be used NOTICES TO THE USER Government law prohibits the operation of unlicensed transmitters within the territories under government control Illegal operation is punishable by fine and or imprisonment Refer service to qualified technicians only One or more of the following statements may be applicable FCC WARNING This equipment generates or uses radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE F
5. e or modify the KCH 16 transceiver for any reason Do not expose the KCH 16 transceiver to long periods of direct sunlight nor place it near heating appliances If an abnormal odor or smoke is detected coming from the KCH 16 or transceiver switch the KCH 16 transceiver power off immediately and contact your Kenwood dealer UNPACKING AND CHECKING EQUIPMENT Note The following unpacking instructions are for use by your Kenwood dealer an authorized Kenwood service facility or the factory Carefully unpack the Handheld Control Head We recommend that you identify the items listed in the following table before discarding the packing material If any items are missing or have been damaged during shipment file a claim with the carrier immediately Supplied Accessories Item Part Number Quantity Hanger with 4 x 16 mm self tapping screws J19 5482 XX 1 set Instruction manual B62 2101 XX 1 SPECIFICATIONS Operating temperature range 30 60 Microphone impedance 2 2 k Max Dimensions W H D without projections 58 125 31 5 mm 2 3 4 9 1 2 inches with projections 68 125 36 mm 2 7 4 9 1 4 inches Weight Cable not included Approx 185 g 6 5 oz Cable included Approx 280 g 9 9 oz GETTING AQUAINTED Handheld Control Head q Power switch Press to switch the transceiver ON Press and hold for approximately 1 second to switch the transceiver O
6. ile you are driving may be against traffic laws Please check and observe the vehicle regulations in your area Do not use options not specified by Kenwood Microphone 1 11 1 2 2 3 5 6 7 4 8 10 9 9 KCH 14 KCH 15 KCH 16 GRP Zone Up GRP Zone Up GRP Zone Up Right Zone Up GRP Zone Down GRP Zone Down GRP Zone Down Left Zone Down CH Channel CH Channel Up Down CH Channel Up Down MON Monitor MON Monitor SCN Scan SCN Scan PF 1 PF 1 None PF 1 None S None PF 2 PF 2 None PF 2 None A None PF 3 PF 3 None PF 3 None B None PF 4 PF 4 None PF 4 None C None PF 5 PF 5 None PF 5 None Orange None PF 6 PF 6 None Up Channel Up PF 7 PF 7 None Down Channel Down PF 8 PF 8 None PF 9 PF 9 None OPERATION 1 Hold the KCH 16 approximately 3 4 cm 1 5 inches from your mouth when speaking 2 To hang the KCH 16 use the hook provided on its reverse side B62 2101 00 M
Download Pdf Manuals
Related Search