Home

Kapsys SmartVision Lite User Guide

1. key is used to switch a character in uppercase or lowercase Touchscreen interface By default Explore by touch is live in SmartVision This feature has the effect of modifying the behaviour of the touch screen interface to suit the persons with vision impairment The rest of this section describes how to use the standard touchscreen interface when that feature is disabled To learn more about this feature how to enable disable it please refer to the Accessibility mode section Standard Touchscreen mode The touchscreen helps you navigate through the screens from the tip of your finger Touch the screen with your fingertip to select an item touch the entry window to display the virtual keypad type on it to write a message or slide your finger up and down to scroll the display SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 14 Selecting or activating an item on the screen Make a short key press or click on an item to select it confirm an action or display the virtual keypad in the provided input field Make a long key press to get more options for the selected item context menu Scrolling a list scroll up and down a displayed list by sliding your finger up and down without removing your finger of the screen Zooming in out available on specific applications such as Image Viewer Email etc Use two fingers to touch the screen pinch inwards to zoom out and pinch outward to
2. O from the touchscreen As soon as the input field is displayed choose speech to text for your message To do so press and hold the voice control key while you dictate Release the key at the end of the message then briefly press on the same key to Send SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 28 Screen reading SsmartVision is equipped with a speech synthesizer that reads the content of the screen to you screen reading occurs in the following instances A new screen appears the title and the highlighted item are read back to you A new item has been selected A command has been executed such as enabling an option An unexpected event occurs such as the phone going into screen off mode or receiving an incoming message Whilst navigating the screen with your finger the touched item is identified to you through text to speech You will find out more about text to speech functionality as you use it on your SmartVision Please note slide your finger from left to right then from right to left to get a voice over full description of the screen your finger must remain on the screen for the command to work You can also use the keypad control mode long press on Hash Mark key then press 2 SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 29 Home screen The home screen operates like a start menu from which you can start any application yo
3. SER 01 Phone Phone storaqe SD Card 4 Then select the destination of the copy In this case the Phone SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 61 amp Copy contacts to Phone 5 The list of all contacts stored on the SIM card appears Select contacts Aram HEKIN Doroth e N Eric DESCH OK 6 Select the contacts you want to save in the phone s internal memory and complete the import by selecting OK Please note you can also select all the contacts from the SIM card via the Menu I key then Select All Delete a Contact From the contacts list select the contact you want to delete Once the profile opens click and Menu 1 and select Delete Confirm the deletion of this contact with OK The contact will then be removed from the phone memory Please note You can also delete all contacts stored into the phone memory by pressing Menu I from the contacts list and select Delete all contacts smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 62 SOS Function For your security SmartVision offers an SOS function which can be used to make location based emergency calls or send urgent messages to pre defined contacts 10 au maximum Warning KAPSYS shall not be held liable for any damage either direct or indirect in the event the SOS feature fails to operate due to a technical problem with the unit
4. 3 When the number or contact name has been entered press the keypad OK key to send the call Phone 04 92 28 88 88 GE Favorite B People History 4 The screen shows that the call is in progress Press the End Ca key at the end of the call or the C key to hang up The unit will display End SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 36 During a call the following three icons will show at the bottom of the screen offering you 3 additional options 4 Turn on the loudspeaker hands free mode Mute the microphone Ea Show the virtual keypad to key in digits when using an automated answering service for example The above options are also available using the Menu I button Please note when the accessibility mode is enabled you can switch to hands free mode and turn the loudspeaker on by pressing and holding the voice control key on the right side of your smartphone To switch back to audio mode press and hold the voice control key again smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 37 Managing phone calls The Phone application allows you to manage your phone numbers by priorities When in the Phone application press the Menu FI button A menu appears The Quick Dial option allows you to set your preferred numbers for direct access from the keypad Call Menu amp Quick Dial Quick Dial Voicemail
5. New Contact 3 Fill in the details for the contact clicking on the relevant fields Photo Surname Name Telephone Email Address 4 When all fields are entered save your contact by pressing OK at the bottom of the record or press the Menu button and click on Save The contact is now saved and listed in alphabetical order among your other contacts lf you want to assign a photo to this contact click on the grey area on top of the record SmartVision suggests you to either take a picture now or choose one from the Gallery icon Please note more fields can be added by simply pressing the Menu button and clicking on Add Field smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 57 Editing a contact 1 Scroll the list until you reach the contact to be edited select this contact Contacts Add Contact John Smith Kapsys Mary Jonhson 2 The contact s record is displayed Mary Jonhson 04 92 28 88 88 3 Press the Menu I button and click on Edit Contact Menu Edit Share Delete Set ringtone Send text message SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 58 4 The contact record is displayed in edit mode allowing you to modify add or delete any field Edit Contact Mary Jonhson 04 92 28 88 88 5 Save your changes by clicking on OK at the bottom of the list or press the
6. Please refer to Kapten application Settings section for more details K TAG Kapten application integrates geo tagging capabilities called K Tag which allows you to save any location associated with relevant information You can use K Tags as waypoints In addition you can have nearby K Tags announced to you whilst you are in free navigation mode A K Tag is a geographical marker that includes A geographical location or an address A voice memo to identify your K Tag A category A favorite attribute used for direct access as a navigation destination SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 72 K TAG Menu From the Kapten application press the Menu l button and click on K Tag The following options are available Create K Tag Modify K Tag Delete K Tag P KTag Create K Tag Modify K Tag Delete K Tag Create a K Tag To create a K Tag select one of the options below Current Position create a new K Tag using your current position New address create a new K Tag by entering an address Coordinates create a new K Tag by specifying the latitude and longitude coordinates P Create K Tag Current position New address coordinates 1 When you have defined a geographical position for your K Tag you can assign a voice memo in order to find it more easily Please select the option Enter voice memo for your KTAG then speak after
7. SmartVision KAPSYS P 3 Ie va a e i a sre Ae G25 TO 1 ao he X a7 A B uno o wa 3 YZ Fo SmartVision SmartVision Lite USER GUIDE SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Introduction Congratulations on purchasing SmartVision or SmartVision Lite smartVision is the first Android Smartphone especially designed for people with low vision and visual impairment SmartVision combines a physical keypad a full voice interface and a touchscreen making it a fully accessible device smartVision is the latest generation smartphone that provides you with a fully adaptive interface and functionalities that are easy to navigate for everyday use Its applications are organised by favorites its user interface has been simplified with a large display large icons 4 font sizes voice command speech to text dictation mode for message writing voice over description of what is on your screen Kapten GPS with voice control a magnifier feature with contrast filter panels NFC tags web based assistance character recognition etc it s all there SsmartVision gives you the best of smartphones with ease of use and unique accessibility This User Guide has been developed to help you learn step by step with the help of screen shots how to use the various basic functions in any of the three operating modes that you have chosen lt is complementary to the Quick Guide a
8. Direct guidance Map discovery Free navigation Pedestrian Navigation navigation is adapted for use on foot Car Navigation navigation is adapted for use in a car Direct Guidance used to guide you towards your destination regardless of the actual road network by giving you distance and direction related information with the cardinal direction to take and for how long Map Discovery used to read the map and move you virtually from junction to junction while giving you a description of each Free navigation free navigation is enabled providing you with real time description of your environment Selecting a destination Regardless of the navigation mode you have chosen you must now select a destination among the suggested destinations below P Where do you wan New address New address by posi Last destinations KTag ooo P O I Itinerary SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 67 Navigate to a New Address This setting is used to specify a postal address as the destination Two options are available to define the postal address as the destination gt France Long press on speech recognition button to enter the complete address city street house number Step by step entry Standard input mode enables you to enter this address in a single step using the voice recognition feature in the following sequence Town city name street name an
9. Menu I button and click on Save Please note if you wish to assign a specific ringtone to a contact open the contacts record and access the relevant menu pressing the Menu F button then click on Set ringtone Favorite Contact Favorite Contact is a very convenient function of your SmartVision It allows you to choose among all your contacts those you wish to get in touch with very easily Favorite Contact works like a mini directory that you can easily access from the Phone and Messaging applications To create a Favorite Contact access the contact s record Select a phone number press and hold the OK key A context menu appears click on Set as favorite Copy to clipboard Set as favorite SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 59 The selected number is shown with a star amp John Smith 04 92 28 88 In the example below Pierre Durand is now available in the Favorite Contact list within the Phone and Messaging applications Favorite John Smith Please note the Favorite Contact list applies to contacts it is different from The Favorites0 application reserved for preferred applications Find a Contact lf you wish to quickly access one of the People saved on your SmartVision you can use the search option From the People application click on Menu From the list of options click on Search A search inpu
10. Settings and Accessibility Mode Please note The Screen off mode is only available when explore by touch is enabled This mode allows you to turn the screen of the SmartVision into black during use in order to save the battery and protect your privacy data Screen off mode When your SmartVision is on a short key press of the On Off button will bring it to standby mode screen off or back to running mode screen on In standby mode SmartVision s screen is off but its features remain enabled You can still receive incoming calls messages emails and navigation instructions Please note as a default setting the handset automatically switches to screen off mode after two minutes of inactivity in order to save the battery SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 11 Unlocking the PIN on the SIM Card The SIM Card has a 4 digit identification code called PIN PIN helps you lock your SIM Card to avoid fraudulent use of your SmartVision To unlock the SIM Card and access the various functions in your SmartVision enter your PIN using the keypad then confirm with OK If you click on Dismiss from this screen you still have access to all the features of the device but no communication functions provided by your telephone service provider are available Please note for confidentiality reasons retrieving your PIN using text to speech is possible through earphones only
11. increases the sound level for users with impaired hearing Disable Android Keys disables Android buttons such as Menu Home screen and Back In such case you should apply gesture commands on the touchscreen This setting is only available when Explore by touch is enabled Backgound color allows you to select the color of the background in menus and lists Please note that this operation is not instantaneous and requires a complete upgrade of the system Play a beep after the validation of a character allows you to play a beep after the validation of a character into an entry field Make a vibration after the validation of a character allows you to make a vibration after the validation of a character into an entry field Validation timeout allows you to set the timeout of the validation of a character 1 2 3 4 or 5 seconds Please note enable or disable Explore by touch feature is also available with direct access via a long press on the On Off C button smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 ay Connecting to Wi Fi E 1 From the home screen click on Settings icon and on Wi Fi Settings Wi Fi E Bluetooth FEB Data usage More Audio profiles DITEN Storage 2 Press the ONOFF J switch on the screen top right to enable Wi Fi connection Wi Fi Kapsys Corpor Secured with WPA2 M21 Secured with WPA WPA2
12. Activate free navigation Enables free navigation mode Stop free navigation Disables free navigation mode K Tag Activates the K Tag menu Speed limit Gives speed limit applied to the road you are on Where am I Gives your current position Parameters Activates the settings menu Current position Gives latitude and longitude information in degrees minutes and seconds altitude information in meters GPS Signal Gives GPS signal strength POI around Indicates Point of interests of any category around your current position Current speed Gives your current speed smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 75 Navigation specific keywords The following keywords are operational only if the Navigation mode is active Stop navigation Stops the current navigation session Roadbook Activates the road book during navigation Remaining distance Gives the remaining distance to destination Last Instruction Repeats the previous navigation instruction Current destination Gives the current destination Arrival time Gives the time of arrival Current Navigation mode Gives the navigation mode currently in use Switch to Pedestrian mode Switches to pedestrian navigation mode without entering again the address for the destination Switch to Car mode Switches to car navigation without entering again the destination address Next Instruction Gives the next navigation instruction Settings Thi
13. M2I_GUEST Secured with WPA WPA2 NVRAM WARNI The list of available Wi Fi networks appears 3 Choose the network you wish to connect to WPA2 PSK Password Show password _ show advanced options Cancel 4 If you wish to connect to a secure Wi Fi network please enter a password 5 Click on Connect an icgn will appear in the status bar indicating that the unit is connected to the Wi Fi network Please note password and security keys WEP WPA2 are supplied by your service provider Please refer to these details to set up your connection and bear in mind the password may be case sensitive SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 aye Adjusting the ringtone 1 From the home screen click on Settings amp icon then on Audio profiles 2 Select General Audio profiles PREDEFINED PROFILES eME Ring and vibrate Silent Silent only Meeting Vibrate only Outdoor Loudest ring and 3 Select Voice call ringtone Settings GENERAL Vibrate Vibrate devices for O incoming calls Volumes INCOMING CALLS Voice call ringtone Set your default voice calls ringtone Videa call rinatane 4 Select to listen to a ringtone 5 Once your choice is made press the Menu F button then click on Apply to save your change Please note to adjust the volume on your SmartVision use the up and down volume keys on the le
14. Opens the notification status bar Enables GPS localisation Disables GPS localisation Enables the Wi Fi Disables the Wi Fi Enables the Bluetooth Disables the Bluetooth Enables the NFC reader Disables the NFC reader Activates the standard ring mode with ringtone and vibration Activates the vibration ring mode Deactivates the ringtone and vibration Activates the ringtone to maximum volume Increases the sound volume Decreases the sound volume Not available on SmartVision Lite Application specific keywords Start application followed by the name of the application the named application is started Example Start application Magnifier Send Message to followed by the name of the contact a message Is created for the named contact Example Send Message to Paul Thomas Call followed by the name of the contact a call is sent to the named contact Example Call Paul Thomas Call followed by the name of the contact and Mobile or Office a call is made to the named contact on his her mobile or office line Example Call Paul Thomas Mobile smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 26 Speech to text or Dictation mode The voice interface also makes it possible to input text in a text field using speech to text This feature is particularly useful for message or email writing web searching or voice dialling a phone number 1 When a text fie
15. SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 12 Keypad Touchscreen and Voice conirol The three interfaces or operating modes by SmartVision The Keypad operating mode is for those who know how to easily handle keys and buttons on a mobile phone To become familiar with SmartVision keypad please refer to the section where functions specific to each key and button are described in detail See page 5 Please note the advanced accessibility mode set by default on your SmartVision supports additional keypad shortcuts for easy navigation through the screens and interact with yours smartphone they are described in the Accessibility mode section Touchscreen mode is smartphone typical operating mode It allows you to navigate through the various menus from the tip of your finger To select an item or confirm an action simply touch the relevant item on the screen Please note the advanced accessibility mode set by default on your SmartVision includes additional gesture commands which enable navigation between screens and interaction with your smartphone These commands are described in the Accessibility mode section below Voice control enhances the use of the device by freeing the user from keypad handling whether it is a physical or virtual keypad The voice control function is activated by pressing the voice key located on the right side of the unit Depending on your option please read t
16. circumstances 1 Press and release the voice control key short key press a beep sounds SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 23 Voice Command 2 The Voice Command window opens say clearly the keyword for example What time is it The answer is given by SmartVision s text to speech functionality for example Its1 46pm Here are two additional examples of voice commands You want to make a call to Paul Thomas 1 Press briefly the voice control key A beep sounds You are prompted to dictate a command 2 There are two possible commands Call Paul Thomas if this contact has been added to your People list Call Paul Thomas mobile if several numbers have been recorded for this contact 3 The system asks for confirmation confirm to make your call to Paul Thomas You want to disable the ring mode on your SmartVision 1 Make a short press A beep sounds The screen prompts for your instruction 2 Say Activate silent mode 3 The ring mode is disabled as SmartVision switches to silent mode smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 24 Voice command keywords The following voice commands have been implemented in the product and are the only words recognizable by SmartVision smartVision keywords fall into three categories Keywords to get information about your smartphone s current status Keywords to enable o
17. emergency numbers that you want to call or send an SMS to in an emergency Phone Call activates telephone calls to your emergency numbers Calls are made one by one in the order defined in the Set Phone Numbers option until a call is answered Answer delay modifies the maximum wait time for a call to be answered before moving on to the next contact on the emergency contact list 30 seconds by default Send Message programmes the sending of SMS to your emergency numbers Send Location reports your geographical location in the message if the information is available when the emergency call is sent Message text customises the contents of the message to be sent to your emergency numbers SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 64 Kapten Not available on SmartVision Lite Introduction The Kapten application is primarily a navigation system designed for people with visual impairment It relies on the satellite positioning system GPS to make your journey easier and improve your mobility thanks to its content rich features such as geo localization navigation and map discovery In addition Kapten will allow you to save your preferred points of interest in order to guide you there whenever you want These points of interest are called K Tags Lastly Kapten map data is stored on SmartVision Micro SD card therefore you can use this application without being co
18. on Star key and short press on 6 cut the selected text Continuous press on Star key and short press on 7 moves the cursor back to the beginning of the text Continuous press on Star key and short press on 8 moves the cursor at the end of the text Continuous press on Star key and short press on 9 paste the selected text Android keypad shortcuts Press and hold the A up key to open the current page menu same as Menu Press and hold the W down key to go back to the home screen at anytime same as Home screen gt Press and hold the C key to go back to the previous screen same as Back SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 17 Gesture control of the Touchscreen How to have an audio description of what is on the screen place your finger on the screen slide it from right to left then from left to right You will hear a voice over description of items displayed on the screen How to browse and activate items on the screen move your finger about the screen The text to speech feature will tell you which item your finger is hovering over To activate this item press OK key without removing your finger from the screen How to get back to the Home screen place your finger on the screen slide it up then left You can also move your finger down and to the middle of the screen the voice over feature will indicate Home screen Press t
19. plugging in the charger Make sure you are using the battery and charger provided by KAPSYS When abroad check that the electrical current is compatible My mobile phone will not connect to a network Try connecting from another location Verify the network coverage with your telephone service provider Make sure the airplane mode is disabled Check with your telephone service provider that your SIM card is valid Try connecting at a later time if the network is overloaded Remove and re install the SIM card The voice interface will not operate lf you are in speech to text mode check your data connection Wi Fi 3G Incorrect use of the keyword or voice command refer to page 25 SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 SIM card error No phone feature can be accessed Check if the SIM card has been correctly inserted Check if the chip on your SIM card is not damaged or scratched Unable to make outgoing calls Make sure you have dialled a valid number and pressed the OK key For international calls check the country and area codes Make sure your mobile phone is connected to a network and that the network is not overloaded or unavailable f you are abroad check with your telephone service provider that you have subscribed to international calling options Make sure the airplane mode is disabled Unable to receive incoming calls Make sure y
20. such as Android Clavier Google Lecteur Google Play Store Google Play Music Google Parameters are registered trademarks of Google Inc in the United States and or other countries ABBYY names brands and logos are registered trademarks of ABBYY Software Ltd Bluetooth names brands and logos are registered trademarks of Bluetooth SIG Inc Nuance Is a registered trademark of Nuance Corporation Inc All brand names and product names are trade names or registered trademarks of the respective companies SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 89 ABOUT THIS DOCUMENT Information published in this document is liable to change without notice Kapsys reserves the right to amend the contents of this document with no obligation to notify any person or entity whatsoever thereof Kapsys cannot be held liable in the event of any technical or publishing errors or omissions contained herein or in the event of accidental or indirect loss or damage resulting from the product operation or from using this document Kapsys endeavours to continuously improve our product and its features quality and performance Kapsys therefore invites you to visit their website www kapsys com for the latest update on the use and operation of this product This product complies with the CE marking requirements for use in residential commercial or light industry installations Prolonged exposure to music at maximum volume c
21. the menu Click on Add alarm to set an alarm the date the time and ring mode you want To disable modify or remove the alarm click on the item and press and hold the OK key to access the context menu Camera Select the Camera application and press the Menu button to access the settings Adjust the camera settings one by one When done press OK key to take a picture You will hear the shutter sound when the picture is captured Pictures taken are saved into the phone memory in the DCIM folder They are also viewable from the Gallery application SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 80 Calculator The Calculator application lets you perform the basic operations such as addition subtraction multiplication and division For more complex operations i e sine cosine logarithm etc calculation press the Menu FI button to access the menu and click on Advanced panel You also have an option for removing previous calculations Gallery The Gallery function works like a photo album where photos and videos captured with your SmartVision are stored Select the Gallery application The album content is organised in 2 categories all pictures 6 and all videos Select an album to view its content Press the Menu I button to access the various options of the album Capture picture lets you use the camera feature to take a picture Capture video le
22. the beep SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 73 If you do not wish to assign a voice memo select Skip in this case the nearest postal address will be used as K Tag identification F foice memo of your H Skip 2 Select the category you wish to assign this K Tag to Contact Hotel and restaurant Transportation etc gt A LAE ELG contact Hotel and restaurant Transportation Health Services Shopping Leisure Tourism 3 Lastly Kapten suggests that you define your K Tag as a Favorite Do you want to set this K Tag as favorite SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 74 Modify a K Tag From the K Tag screen click on Modify K Tag and choose the category as well as the K Tag to be edited When the K Tag is selected you may modify its Category Voice memo or Favorite attribute What do you wantt Category Voice memo Favorites Select an option and make the required changes by following the steps below Remove a K Tag From the K Tag screen click on Delete K Tag and select the category and the K Tag to be removed Voice command keywords The Kapten application includes voice command key words which are permanently operational when the application is active Generic keywords The following generic keywords are always active even when the navigation function is off
23. the category then the K Tag you want to navigate to For more details on K TAGs and how to add and manage them please refer to K Tags chapter Navigate to Point of Interest This option allows you to choose a useful address or point of interest POI by category near to my current position by category near to new address by name near to a specific address Prepare your Itinerary select a departure address and a destination address Kapten will calculate the best route for the chosen navigation method The calculated route will be described as a road book Navigate using the up and down arrows included in the road book and listen to the navigation instructions for your trip SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 69 During navigation Guidance instructions are displayed and announced during your entire trip From top to bottom of the screen you will find The name of the street you are in pink zone The distance to the next manoeuver black zone The symbol for the next manoeuver black zone The name of the next street blue zone From Avenue du Docte AO feet To play back the various guidance messages you can In advanced accessibility mode when screen reading is enabled slide your finger from right to left then from left to right without removing it from the screen in order to read the full content of the screen n standard mode w
24. to indicate an outgoing call made by you Red arrow to indicate a missed call SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 40 Calling a number or a contact from the Call History To call back a number or a contact from the Call History simply click on the number contact from this screen and the call is made instantly At the end of the call press the C key of the keypad or press the Hang up Egy icon to end the call You can also call back a missed call from the notification panel BN as follows a Wi Fi Bluetooth GPS Brightness Clear all Missed call 33 4 92 28 88 78 Paul Thomas 2 unread messages Open the notification panel Select the missed call alert you will instantly reach the History menu of your smartphone Please note To remove an item from the history select it and press and hold the OK key then select from the contextual menu the item remove from call log You can also remove all call history from the Menu in the History page smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 41 Messaging The Messaging application lets you send and receive short messages or SMS and MMS text messages containing a multimedia item such as an image or a video etc How to send a message 1 From the Home screen click on the Messaging icon 2 Click on New Message on top of the screen Messaging N
25. 800 1900 Wireless connectivity o Bluetooth 3 0 o WLAN IEEE 802 11 a b g n 2 5GHz 5GHz o NFC not available on SmartVision Lite Power consumption o Battery 2000 mAh Li ion o Standby time idle 220h o Talktime 10h Processor Type Cortex A9 1Ghz Internal memory 4Go External memory microSD slot up to 64GB GPS receiver Yes with A GPS support Other sensors accelerometer gyro digital compass SAR 0 297 W kg Camera Resolution 5 Megapixels Video HD 720p 30 fps Focus manuel and autofocus Digital zoom 4x Flash LED SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 93
26. D show or hide your phone number Call waiting activate the call waiting option Cell Broadcast receive messages from the network Minute reminder have a beep sound every minute while on a call TTY Mode activate or deactivate data transfer mode SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 38 How to answer a call When you receive an incoming call a ringtone is heard The unit immediately shows two keys Accept and Refuse even in screen off mode om 33 611500153 Incoming call Accept Refuse The caller s number appears in large format on the top of the screen lf the caller is a contact that has been added to your list of People his her name will be shown instead of the phone number Press the OK key of the keypad or the Accept key on the screen if you want to answer If not click on the C key or select Refuse from the screen lf you have missed a call this call will be listed in the call History as a missed call with a red arrow You will be able to call back simply by selecting this number or contact from the History menu The missed call will also be shown on the home screen with a red bubble over the Phone GS icon and a message alert in the notification panel If you click on the missed call from these locations you immediately reach the History menu Please note the missed call can also be indicated by the E voicemail symbo
27. Date amp time set date and time on the unit time zone time format Schedule power on off schedule automatic turn on off Accessibility configure accessibility mode settings Developer options settings reserved for the more experienced users About phone check the condition status of your smartphone and install updates 1 Not available on SmartVision Lite Here are some examples of configuration Accessibility settings SmartVision includes options that let you personalize and adapt your Smartphone to meet your needs Go to Settings icon and click on Accessibility Accessibility SERVICES Kapsys Accessibili On SYSTEM Large text LI Power button er E Auto rotate scr L Speak passwor E Kapsys Accessibility is the accessibility capability developed by KAPSYS To access the various options select Accessibility then press the Menu button and click on Settings The settings are as follows Screen Reader enables or disables text to speech functionality Echo on input defines whether text to speech feature should announce your input by character by word or by the whole sentence Notifications enables text to speech of notifications and alerts when they are received in the notification panel reception of an SMS for example TTS speed adjusts text to speech speed TTS voice chooses a male or female voice Speech Recognition enables or disables the voi
28. Settings 2 Long press to mod 3 Long press to modi 4 Long press to modi 5 Long press to mod 6 Long press to mod For example if you wish to save a phone number that you use very often for a quick access by assigning to number key 2 EA of the keypad First click on Quick Dial then click on line two to choose 2 Press and hold the OK key and enter the requested details then hit OK to confirm Next time you call this number simply press and hold the 2 E key on the real keypad from the home screen smartVision will automatically make the dialling and send the call Please note number key 1 EJ is dedicated to direct access to SmartVision voicemail it may be preset by your telephone service provider depending on your contract and SIM Card The Settings option allows configure the Phone application specific options to suit your preferences Ringtone activate or deactivate the ringing vibration Voicemail choose a service and set up your telephone service provider s voicemail number Call forwarding forward the incoming calls to a different number Call barring forbid the outgoing and incoming calls on your SmartVision while you are abroad for example Missed call notification activate or deactivate incoming call alerts Fixed Dialling Numbers restrict calls to specific numbers saved on your SIM Card Quick responses send a quick reply using an SMS template Caller 1
29. Zoom in ja E SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 gs Accessibility Mode This section describes specific commands and gestures as well as keypad shortcuts hot keys to help you control and interact with your SmartVision when the accessibility mode is enabled default setting From the home screen click on Settings to enable or disable the accessibility mode then click on Accessibility and check or uncheck the Explore by touch option in the list Keypad control mode smartVision allows quick access to some functions by pressing and holding the hash key Hash Mark located at the bottom right of the physical keypad and pressing on another key of the physical keypad A beep will signal the switch to keypad control mode If no other key is pressed right after another beep will go off If you press the Hash Mark control key with another key the device will perform the following commands Press and hold the Hash Mark key and press 1 inform you about your smartphone s status time battery level current network status Wi Fi status GPS status Bluetooth status NFC Status ringer mode and alarm Status Press and hold the Hash Mark key and press 2 lets you read the content of the current screen Press and hold the Hash Mark key then press 3 displays the smartphone status bar Press and hold the Hash Mark key then press 4 increases the speed
30. access the virtual keypad move your finger until you touch the input field then press OK key without removing your finger from the screen The virtual keypad appearance changes from numeric to alphabet to suit the content of SmartVision s input field Firstname OK yee Pee R ie eee U ee 0 IE me fer ee Pe ee ee ee ee t ZXCVBNM E aa a oe Select the character to be entered by sliding your finger on the bottom virtual keypad and confirm the character by pressing the keypad OK key without removing your finger from the screen lf you want to enter a digit while only alphabetical characters are available press the Symbol key at the bottom left of the virtual keypad then to switch back to the alphabet press the ABC keyg Pressing Back J will close the virtual keypad Please note use the C key on the physical keypad to erase a typing mistake at anytime smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 21 Voice interface Free yourself from the keypad either physical or virtual To activate the voice mode look for the voice control key located on the right side of your handset press it SmartVision s voice interface integrates the latest generation voice recognition technology which makes it the major asset of this smartphone The voice interface enables you to control fully your handset as well as to input text using the two options below Short pr
31. an cause hearing damage SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 90 Troubleshooting Prior to contacting the Customer service please read the recommendations below For optimal performance of your device we recommend that you switch it off from time to time It is recommended to fully charge the battery for improved operation And carry out the following checks My mobile phone will not switch on I get a black screen Press the On Off Okey until the screen comes on Check the battery charge level Check the battery contacts remove and reinstall your battery then switch your telephone back on My screen is difficult to read Clean your screen Adjust screen brightness to your environment lighting conditions quick setting from the notification panel My mobile phone switches off by itself Press the On Off key to bring it back on Check the battery charge level My mobile phone has a low level of autonomy Make sure you respected the full charge timing minimum 4 hours To increase the battery life you can disable Wi Fi Bluetooth and GPS functions if you do not need them quick setting from the notification panel My mobile phone will not charge properly Make sure that your battery is not completely discharged Make sure charging is carried out under normal conditions 0 C 40 C Check that the battery is inserted It must be inserted before
32. and say clearly the keyword Battery level To charge the battery plug the USB cable included in the box into the mains charger You may also charge your SmartVision using the docking charge Please note the protective case should be removed when using the docking Station If you don t want to remove the protective case to charge the device you may use the USB port located on the right side of the device Not available on SmartVision Lite smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 10 Switch ONOFF your SmartVision Press and hold the On Off button on the top of the device to start your SmartVision Release the button as soon as the device vibrates Please note if the device does not start please check if the battery has been properly installed if not please repeat the installation procedure Press and hold the On Off button to switch off your SmartVision Power off x Aeroplane mode Aeroplane mode is OI Explore by touc xpiore Dy toucn Is active Ringer off Q Ringer vibrate 1 Ringer on A screen called Main menu appears Click on Power off and confirm You will feel a slight vibration as the device goes off Please note The Main Menu screen also provides shortcuts to other direct options Aeroplane mode Explore by touch Screen off mode and configuration of the ringer To learn more about these different modes refer to chapter
33. ate them Green messages are messages sent by you Blue messages are messages received by you Red messages are unsent messages or messages being sent 2 Paul Thomas Hi Paul how are you Received 11 54AM Really fine and you SENDING Great Go to cinema tomorrow as agreed Reply Deleting an SMS MMS To delete a discussion thread or a message select the item to be deleted press and hold the OK key on the keypad A context menu opens click on Delete to remove the selected item You can also access the discussion thread and message related options by pressing the Menu button SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 45 E Mail The E Mail application lets you send and receive emails from your email account The E Mail application by SmartVision will not work unless you have an existing email account with an email service provider Email account setup When opening the E Mail application for the first time you will need to set up your email account You will need to have your email account information handy such as your email address and password From the home screen click on E Mail icon An account set up screen appears Account setup You can set up email for most accounts in just a few steps smartvision gmail com Please enter your Email address Enter your password Click on Next Then follow the instructions on
34. ce recognition mode via the voice control key located on the unit right side SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 J Caller Id alert announces the name or phone number associated with an incoming call Voicemail alert announces an incoming message to your voice mail Stop on shake stops text to speech mode by shaking the handset Stop on proximity stops text to speech mode if the smartphone is closed to your ear Speak when locked enables text to speech when the unit is in screen off mode The other accessibility typical options are Large text increases the font size This setting is also available in the section about the Display Power button ends call ends the ongoing call via the on off key Auto rotate screen toggles instantly between portrait landscape depending on the screen position We recommend you leave this option inactive Speak passwords enables to enter the password using text to speech For confidentiality reasons you will need to use the earphones to enter your password in text to speech mode Explore by touch activates screen reading as well as specific gesture commands for the visually impaired users Touch amp hold delay adjusts multi tap detection speed on the touchscreen Install web scripts authorises scripts to be installed on your web browser to improve your accessibility Hearing aid compatibility HAC
35. ck Downlo Email lt a Ox gt lt FM Radi Gallery Kapten O fn The list of pre installed applications on your SmartVision may vary depending on the country the telephone service providers and the configuration of the product Please note you can quickly reach an item in the list of applications using the keys 2 9 on the keypad For example pressing the 6 A key to select the first application beginning with the letter M Press twice the 6 E key to select the first application beginning with the letter N etc The Star and Hash keys to quickly access the beginning and end of the list SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 33 Favorites The Favorites application is SmartVision s most convenient functionality and is available from the home screen It works like a directory in which your preferred applications or the ones you use most frequently are stored Creating a favorite For example add the Calculator application into Favorites 1 From the home screen select Applications 6 2 Scroll the list until the Calculator application is highlighted Applications i Assistance Browser amm g Calculator En Calendar foma Camera 3 Press and hold the OK key of the keypad to open the context menu 4 From this context menu click on Insert to favorite to store Calculator in your preferred applications Menu Insert to favori
36. corrosive place Do not use the product in areas with very high or low temperatures Do not use the product near magnetic fields Do not use your device if the screen is broken or cracked as this could cause injury Do not use the product in potentially explosive areas Do not use the product in health care facilities and ask for authorisation before using your phone near medical equipment Your product contains a built in lithium polymer battery To increase the battery life always charge it fully and do not charge the product in temperatures below 0 C 82 F or above 45 C 113 F Do not expose your product to extreme temperatures Operating temperature range 10 C 14 F to 55 C 131 F Short term storage temperature 20 C 4 F to 60 C 140 F Long term storage temperature 10 C 4 F to 25 C 77 F Prolonged use of the product may cause the product to heat but this is normal For optimal performance of your device we recommend that you switch it off from time to time and remove the battery 2 SAFETY AND HEALTH Keep the product away from small children as small parts in the product or the product s accessories may cause choking Keep your hands free when you drive drive your car in a safe and responsible manner and observe traffic rules Protect your hearing avoid prolonged exposure to high sound levels when using the earphones loudspeakers or the receiver If you wear a pacemaker or live near a person
37. d then street number To enable this mode from the address input screen press and hold the voice control key to enter the address and release the key after it is entered d Dictation Kapten will then suggest likely candidates matching your request select one and a navigation session will start for that particular destination Step by step Input in this mode you must enter the various details of your destination address in successive stages i e town city name then street name and street number Select Step by Step Entry to access this input method and proceed step by step SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 68 At each stage you can either use the keypad or speech recognition Press and hold the voice control key and speak after the signal tone A list of candidates will be suggested select one and proceed to the next step P United Kingdom London When you have entered the various fields for the destination address the trip will be calculated and guidance will start instantly Navigate to New address by ZIP code Select the destination town and enter its postal code street name and number in sequence Navigate to Last Destinations Select your destination address from the Last Destinations list You can remove the list of your previous trips Please refer to the Parameters section to clear your list of recent trips Navigate to K TAG Select
38. e smartvisionbykap Subject Compose email 4 Click on Send when you have completed the message your Email is sent Additional available options To add an attachment to the email Photo Music File click on the attachment pictogram at the bottom left of the screen or press the Menu F button and click on Attach file from the list of options To add a recipient press the Menu S button and click on Add Cc Bcc To save the message in order to send it later press the Menu button and click on Save draft To delete the message without saving press the Menu f button and click on Discard You can also delete an email doing a long press on the email from the inbox SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 47 Receiving and reading an email When you receive an email the home screen will show the Email icon flagged with a red bubble 12 04 PM Tuesday 17 June Messaging i t E Mail Settings 2 7 Favorites Applications This will also be notified to you via the status bar provided the Email notification option has been enabled when you set up your email account To access the Inbox and read your incoming emails click on the E Mail application from the Home screen or on the new email notification from the notification panel 2 Inbox ibykapsys qmatt com Compose Equipe Google 3 Jun Premiers pas avec Google B
39. e dangers you may come across such as rivers bridges barriers or similar obstacles Kapsys decline any and all liability for damages either direct or indirect resulting from the use of this mode The following information is provided in Direct guidance mode Cardinal orientation from your point of arrival to your current position i e North North East East South East South South West West and North West Distance from your current position to your point of arrival in meters or kilometers Direction you need to take to get to your destination This information is expressed in hours using the clock position format from 1 to 12 hours based on your last known direction When Direct guidance mode is enabled distance cardinal direction and heading information is announced at regular time intervals Please note that the Kapten application will accurately calculate your direction only if you are moving If you are at standstill Kapten gives you the previous and correct direction The application will additionally send the message No direction information when it is unable to provide any reliable information on the direction to follow Example of Direct guidance messages Destination point North West at 250 meters please make a right your destination point is 250 meters in a North West direction you must turn right Direct guidance does not automatically stop after you reach your final destination you must p
40. e on the right and alert icons related to the various applications are on the left Please note you can check on the status of your SmartVision at anytime by simply sending a Phone status voice command or use long press on Dash Mark key followed by 2 key Samples of status icons E Battery level of charge indicator l Network signal strength indicator F Wi Fi signal strength indicator Samples of notification icons You have unread messages 7 Missed call ao You have voice messages SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 31 The status bar gives access to the panel of notifications where all alerts and events on your smartphone have been reported Thanks to these notifications you know exactly what event has occurred on your smartphone To flick the panel open slide your finger from the top of the display towards the bottom your finger must remain on the screen throughout the command for it to work Please note You can also use the keypad control mode long press on Hash Mark Lima key then press 3 to open the notification panel SmartVision s settings are available on the upper part of the notification panel These are from left to right Activate Deactivate WI Fi connection Activate Deactivate Bluetooth Activate Deactivate GPS localisation Adjust display brightness Auto Level 1 Level 2 Level 3 Delete all noti
41. e screen eN button F3 EJ key is assigned to SmartVision Back J button j Ere Arrow keys J wal _jare used to navigate through screens and menus on your SmartVision a The mouse left button is used to select an item on the SmartVision s screen Click on the Ends with assistance option on your smartphone to stop the sharing session at any time F11 The support person can also end the session by pressing the F11 __ key on his her computer SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 19 Calendar The Calendar application opens a calendar showing the current week Press the Menu F button to access the various options of the Calendar menu New event Refresh Search Calendars to be displayed Settings New event schedules an appointment by filling out all the fields event title location date etc Refresh updates the agenda Search searches an already scheduled event Calendars to be displayed synchronises this calendar with another in a PC for example Settings accesses the general settings and lets you personalize the events display reminders notifications etc based on your preferences Please note if you wish to modify the display format of the calendar click on the top bar and choose between day week month or list of events formats Alarm Clock Select the Clock application and press the Menu I button to access
42. egistered Please contact your vendor for any queries about warranty service Users who apply for coverage will be requested to provide a proof of purchase of their product address and date of purchase In accordance with article L 211 16 of the French Consumer Code the warranty period of a product repaired under warranty where the product is unavailable for use or cannot be used for more than seven days 7 is automatically extended by the duration of repair Kapsys warranty does not cover Accessories supplied with the product Normal wear and tear of the product and reduction in the battery charge holding capacity Damage resulting from improper use exposure to humidity or liquid or close proximity to a heat source Cracked or broken devices or devices with visible signs of knocks Failure to respect the precautions for use accidents negligence misuse or use inconsistent with the instructions provided with the device or commercial use of the product Short circuits of the battery or use of the battery in another device than your device Use of accessories or connectors not recommended by KAPSYS Damage as a result of attempt repair by anyone not authorized by Kapsys The limited warranty included herewith and complying with the applicable legislation excludes any other implied warranty and or duty incumbent upon the seller in particular but not limited to any obligation in terms of satisfactory quality reliability
43. ervice provider to replace it with a Mini SIM It is recommended to change the format of the SIM card rather than using an adapter Inserting the SIM Card 1 Turn the device upside down look for the notch at the bottom left and lift the back cover 2 Install the SIM Card with the chip downwards and the tapered angle to the bottom right Slide the SIM card pushing upwards to fit it snugly into its compartment Please note the Micro SD memory card reader is located right above the SIM Card holder Depending on the configuration of your product the Micro SD may be already installed in the product SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 The battery Inserting the battery 1 Insert first the bottom of the battery into the slots 2 Snap the battery into place 3 Put back the rear panel fitting the top part first 4 Snap firmly and close your device SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Charging the battery The battery you purchased with your SmartVision is not fully charged Before using the device we recommend that you charge the battery for at least 4 hours You may subsequently charge it as needed and depending on your use and the available charge of the battery You may check the icon located in the top right bar at anytime to know how much charge is available in the battery You can also short press the control key
44. ess of the control key to browse the various screens and menus get information or performance from your device using the built in keywords as voice commands Long press of the control key to perform speech to text entry in an input field The following pages focus on the voice control interface Please note to enhance voice control performance you should use it in a quiet environment and speak clearly SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 22 Controlling the screens through voice commands The voice control feature enables audio description of all texts displayed on your SmartVision freeing you from using the physical or non physical keypad 1 Press and release the voice control key short key press a signal tone is heard and a Voice Command window opens Voice Command 2 Pronounce clearly the displayed text to activate screen reading for example an application name an item in a list Warning Screen reading of items that are not displayed on the screen is not possible Voice command A voice command is an audio instruction given by the user using their own voice The purpose is to obtain audio information from your SmartVision enable or disable a functionality or perform more complex operations on the unit Voice commands are managed through key words which have been predefined and incorporated into the product You can use these commands at anytime and under any
45. ess these options by pressing the Menu F button Please note For best results proper lighting conditions are required Colors Detections Colors detections allows you to use the phone s camera for the recognition and detection of colors Announce colors point the camera on an object and the color will be announced automatically Press the OK key to repeat Find color select a color from the list and when the camera will see this color a sound is played Please note it is recommended to position the phone about twenty centimeters from the target and in a bright environment in order to optimize the result SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 82 Sound recorder The Sound Recorder application is used to record voice memos Select Record to start recording the memo click on Pause to hold and on Stop to end the recording Sound Recorder Sound Recorder 00 00 ff 00 06 List Stop You can listen to a recorded memo by selecting the Play option You may also Discard or Save it 9 Sound Recorder 00 11 Play Discard Save Lastly you can play back any of the voice memos recorded from the home screen after clicking on the List option You can also edit a voice memo from this list by long press the item you want to change Then select from the window Rename the record or Delete Record Music The Music applicat
46. ew Message 3 Several options are available to enter the recipient details type his her phone number into the To input field using the keypad or select one or more recipients in the People list or choose your contact s from the Favorite menu Messaging GES Favorite B People Write Message 4 When the recipient s details are entered click on Write Message The Type message screen appears smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 42 Messaging 5 Type your message in the text field using the physical keypad the virtual keypad or speech to text press and hold the voice control key to dictate Messaging Hi Paul how are you 6 When the entry is completed click on Send your message will be sent and a conversation is opened Please note if you wish to attach an image or a video to your message click on the attach symbol at the screen bottom left or press the Menu button SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 43 Messaging menu Options Click on the Messaging icon from the Home screen Press the Menu FA button to access the Messaging application various options Menu Message Delete all threads Search Settings The options below let you configure the Messaging application to suit your own preferences Delete all threads deletes all threads stored on your smartpho
47. fications Notifications in the lower part describe the various incoming events When you select an event from this panel the corresponding application is instantly launched For example if you select a missed call BJ SmartVision opens the History window of the Phone application where missed calls are saved You can choose the missed call number or contact name to call back that number contact Notifications are automatically deleted after they are read This panel also includes notifications such as alerts updates etc To close the notification panel press the Android Back pE button SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 32 Applications From the home screen press the Applications icon 5 and find a list of all the applications available in your SmartVision These applications are listed by alphabetical order Applications i Assistance gt Browser g Calculator f1 Calendar fom Camera To start an application scroll the list until you reach the desired application and select it Please note you can also use the voice control feature to start an application by sending a Start application command followed by the application name You can re organise the applications into a grid format to do so press the Menu button and click on By matrix Applications Uia nO Calculat Calenda Camera a lin ce 6 m Clo
48. ft side of the On Off button connects to the earphones supplied with the device Right side SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 The voice control key is located on the right side of your SmartVision Press briefly this key to send a voice command and press and hold if you want to write a message through dictation The mini USB port on top of the handset provides for connection to a PC or to a mains charger using the cable included in the box Bottom Connection terminals at the bottom of the handset are used to connect to a docking station to charge the battery and a microphone Left side The two keys located on the left side of the handset are used to increase volume up key or decrease volume down key the sound volume SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Rear The emergency orange button is located on the back panel top left Push down this button to start an emergency instance On the right of this SOS button are found the camera lens and a port for amplified listening SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Installation Inserting the SIM Card The SIM Card is issued by a telephone service provider when you take out your telephone contract Please note only Mini SIM 2 FF Cards are supported by SmartVision If you have a different SIM card please ask your telephone s
49. ft side of your handset The volume control will apply to the audio source currently in use Backroad Beat Plucker Bell Phone Bentley Dubs Big Easy Bird Loop Bollywood OKOKOJ OJ OKOKOKO Bus a Move SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 54 Airplane mode The airplane mode disables all sources of radio frequency on the device Wi Fi Bluetooth cellular network etc To activate the Aeroplane mode press and hold the On Off 5 key Power off Aeroplane mode Aeroplane mode is OFI Explore by touch xplore by touch is act Ringer off Q Ringer vibrate 1 Ringer on Main menu is displayed Select Aeroplane mode You will be notified that this mode is activated by the pictogram in the status bar Please _note airplane mode can also be activated from the Settings amp application by selecting More option then Airplane mode SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 55 Updating the SmartVision Updates for your smartphone will be notified on the home screen with the red bubble over the Settings a icon To activate the update click on Settings G System updates Smart Vision update 688917 94 KB Firmware update can enhance machine stability and patch bugs Download Select Download Download will start automatically and will last for about 30 to 40 minutes depending of you
50. gement Wi Fi HR Senn oO Data usage More Audio profiles DE 2 Scroll the list and select the category of setting or the setting to be edited 3 When all settings have been edited press the Home screen N button to save your changes SmartVision settings are organised into categories such as SIM management manage the SIM Card settings Wi Fi activate and manage the Wi Fi connection Bluetooth activate and manage connection with accessories and Bluetooth peripherals Data usage activate and monitor data usage More configuration and connection to wireless networks Mobile networks NFC data networks Audio profiles configure sound settings on your handset ringtone message alerts sound volume Display configure the display settings font size brightness wallpaper etc Storage manage storage usage by application Battery monitor battery usage Apps manage the applications installed in your product Accounts amp sync manage your email accounts and synchronisation SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 50 Location services activate and manage localisation services GPS and network Security manage security settings PIN lock screen password Language amp input configure display and keyboard language Backup amp reset remove personal data and restore default settings
51. he OK key without removing your finger from the screen SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 18 How to move back to the previous display place your finger on the screen slide it down then left without removing your finger of the screen You can also slide your finger down and to the right you will hear the text to speech feature say Back Then press the OK key without removing your finger from the screen How to access the menu or the options for the active application place your finger on the screen slide it up then right without removing the finger You can also slide your finger down and left the voice over feature will say Menu Then press the OK key without removing your finger from the screen How to scroll a list place your finger on the screen and slide it up or down to scroll a page or a list upwards or downwards SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 19 How to open the Notification status bar place your finger on the screen and Slide it from left to right and down The voice over feature will indicate the status of your smartphone Wi Fi Bluetooth GPS etc as well as the last ten notifications SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 20 The virtual keypad To enter text into the input field you can use the real keypad but also the virtual keypad To
52. he explanations and recommendations below provided for easy handling of each interface Keypad interface Your SmartVision includes four control keys located horizontally on the top of the keypad They are from left to right OK key to confirm an option a selection or to accept an incoming call In some instance when pressing this key a context menu is displayed with additional options available for the selected item a contact an application a message etc A V The up and down arrow keys to scroll up and down the various items displayed on the screen C key to clear a character or digit reject or end a call SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 13 The alphanumeric keypad located under these control keys is presented in three rows of number keys organized from left to right as follows First row 1 2 3 star keys Second row 4 5 6 O keys Third row 7 8 9 keys The alphanumeric keypad key 1 to is used to enter text or characters depending on the input field Each key gives access to several characters number key 2 gives access to a b c 2 A capital B capital C capital To select the appropriate character press repeatedly the relevant number key to access the various characters associated with this key Number key 1 ME is used to insert punctuation marks and number key Hash Mark is used to insert a space The star
53. hen screen reading is disabled use the up and down keys to read the various details on the screen n voice recognition mode you can use keywords of the Kapten application as Last Instruction The list of keywords is available via the Menu button Please note if free navigation is enabled during a guidance session instructions for free navigation will be provided alongside the usual navigation instructions During navigation the keys of the physical keyboard are also associated with specific keywords Make a short press on one of these buttons to get an information related to your journey Key 1 Key 2 Key 3 Key 4 Key 5 Key 6 Key 7 Key 8 Key 9 Where am Last instruction Next instruction Current speed Speed limit Remaining distance Point of interest Enable Disable the free navigation GPS signal SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 70 Direct Guidance mode Direct guidance mode provides you with real time information on the distance and direction to your destination point Such information is calculated as the shortest distance between the two points and does not take into account any road network This navigation mode is particularly useful to reach a destination point in or off road Please note that information is provided for convenience only and does not take into account the topography and possibl
54. i Fi login details username and password and automatically logs in Voice memo assigns a voice memo and plays it To write or read an NFC Tag bring the back side of your smartphone close to the tag a beep will notify you that the action was registered SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 84 OCR Not available on SmartVision Lite The OCR function scans a text by means of optical character recognition and reads it using text to speech function The conversion rate depends on the text capture quality The OCR application is equipped with intelligent document recognition and automated data capture system that has the capability to accurately convert an A4 document with text in font size 12 or higher To ensure automated detection your document must be placed in front of you in vertical position on a clear one coloured well lit even Support base which strongly contrasts with the document to be scanned Two capture modes are available 1 Page detection capture mode is particularly useful for blind people The user is voice guided throughout the process of having the document detected and captured automatically 2 Camera mode allows to capture text documents without voice guidance Select Applications 6 from the home screen and click on OCR From the OCR menu select the source o From camera From gallery a3 Tutorial From camera to take a picture
55. ienvenue dans Google L quipe Gmail 3 Jun Facilitez vous la vie avec la boite de r ception Gmail L quipe Gmail 3 Jun Trois astuces pour profiter au mieux de Gmail Click on the new email Emails that are unread are placed on top of the list and flagged with To read the contain of an email you can also use the text mode option through menu 1 this option allows a better and easier vocalization Once the email read you can press again menu and reply or forward the email You can also move it to another folder or delete tt SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 48 Delete an email You can delete an email unitarily or by group To delete an email unitarily simply open the email you want to delete and select Delete from Menu lt is also possible to delete an email without consulting him In this case select from the list of emails the email you want to delete and perform a long press on the OK button Then select Delete To delete a group of emails press Menu from the list of emails and select Start multiple selection When Multiple selection is enabled the list of emails is displayed again and a short press on the OK button checks the selected email To check all the emails press Menu then select all To delete the emails that have been checked press again Menu then Delete all selected Please note Multiple selection i
56. ion allows you to play music or voice memos stored on your phone memory or micro SD card SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 83 Browser The Browser application is used to access the Internet Press the Menu button to access the internet settings Through search item from the menu you can launch a simple search using the default browser Please note You can also search the web using the Search application Web page loading is indicated by a beep NFC Not available on SmartVision Lite NFC Near Field Communication technology lets smartphones and other devices to communicate with NFC tags SmartVision offers this feature therefore you can set up and read your NFC tags NFC Dial Profile Setting Application Internet bookmark Text Set Wifi Voice memo The different options available in this application will let you assign either information or an action to an NFC Tag which can then be automatically executed when you read the TAG These options are Dial assigns a phone number to a contact and dials that number Profile Setting assigns a phone mode Wi Fi Bluetooth Airplane mode ringtone and enables it Application assigns an application which can be automatically launched Internet bookmark assigns a link to a webpage and loads the webpage in the web browser Text assigns a text and reads it using speech recognition Set Wifi assigns W
57. keypad number keys 0 to 9 Press briefly the key assigned to the station to be played Press the Menu F to access the application options Please note the FM radio only works when earphones are connected to the phone as they serve as an antenna Search Use this application to find any item on your SmartVision application contact Email address music This application is very useful to make searches on the internet Downloads The Downloads application gives the list of all items downloaded from the internet browser SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 86 Legal notice and Warranty 1 PRECAUTIONS FOR USEAND RECOMMENDATIONS Handle your KAPSYS device and accessories with care do not drop it or Knock it Your device is equipped with a touchscreen please use your fingers only Do not dismantle the product as this will result in the warranty being voided and could cause damage liable to render the product unusable Clean the product using only a soft slightly damp cloth Do not use chemicals detergents or abrasive products which could damage the device Do not rub the product with a sharp tool which could damage it This product is not waterproof Protect it from damp and splashes of liquid If your device is wet or has been exposed to humidity remove the battery and let it dry Never use the device near a source of heat and avoid storing the device in a hot humid or
58. l in the status bar Please refer to the next page to learn how SmartVision voicemail operates Voicemail SmartVision is equipped with a voicemail that works like an answering machine Configuration and features of the voicemail service depend on your service provider To set up your voicemail please click on Phone Press the Menu l button and click on Settings then on Voicemail Enter the number for the voice mail supplied by your telephone service provider and confirm SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 39 Voicemail VOICEMAIL Voicemail service Choose voicemail service Voicemail settings Whenever a caller leaves you a voice message the message will show in the status bar with the Voicemail E symbol To listen to your voice message simply call your voicemail service making a long press on number key 1 E from the physical keypad Call History The History menu stores calls recently made or received by you They are listed from newer to older This feature presents two advantages it keeps you informed of any call you have missed and gives you direct access to phone numbers and contacts History TODAY Kapsys 11 02 AM Paul Thomas 10 46 AM 04 92 28 88 78 9 58 AM John Smith 9 57 AM smartVision makes use of the symbols below for each call Blue arrow to indicate an incoming call either accepted or rejected by you 1 Green arrow
59. ld is displayed the smartphone is ready for dictation mode Messaging 2 Press and hold the voice control key while dictating your text all the way through Example With the Dictation window displayed speak out clearly and audibly Would you like to come over for lunch next Sunday Dictation 5 3 Release the voice control key when dictation is complete 4 The dictated text is shown in the text field smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 27 Messaging Would you like to come over for lunch next Sunday 110 1 Please note to add punctuation marks you must pronounce the name of the punctuation mark you want Example Would you like to come over for lunch next Sunday question mark Please note Speech to text can be used for up to 30 seconds at a time Warning Speech to text feature requires a data connection such as Wi Fi or 3G If you are not connected to a data network or if the connection speed is too low the service will not be available and you will get the following alert No high speed Service MEVEIELI E throughput too low Close You are free to use the 3 interfaces on your SmartVision either separately or in turn You can start with the touchscreen mode and continue with the voice control mode or the other way round as described in the example below Open the Messaging application by clicking on the Messaging
60. me screen click on Applications 6 then on Kapten J The Kapten application is not operational until the GPS feature is activated If the GPS is not active you will be requested to activate it upon starting the application This application requires GPS localization to be activated GPS Settings Cancel Select the GPS Settings button Check the GPS satellites box when you reach GPS settings menu and press the Back SJ button to go back to Kapten application Location services Google s locatic Let apps use data from sources such as Wi Fi and mobile m networks to determine youl approximate location GPS satellites Let apps use GPS to pinpoint your L location The Kapten application is started loading map data then the application main screen appears lf you use it for the first time the application will request your default country Select the desired country from the list You can change the default country subsequently from the Kapten application s settings by pressing the Menu button then clicking on Parameters then System and Default Country Please note loading the application may take time depending on the size of the map installed on your unit SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 66 Different navigation modes Select the navigation mode you want to use Enter the navigatio Pedestrian navigatio Car navigation
61. nd will allow you to make the most of your SmartVision How to use this material This User guide describes SmartVision s main features and operating modes Features are described in a generic manner without reference to the more specific requirements of the advanced accessibility mode default mode which are fully described in the Accessibility mode section Not available on SmartVision Lite SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Content of the box SmartVision by KAPSYS includes A battery A 220 110V 5V USB mains charger A docking station for charging A USB micro USB cable A lanyard Two stereo earphones with microphone and a push to talk button A protective case This list of accessories may vary depending on the country device configuration or model version Not available on SmartVision Lite SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Table of Contents Introduction Content of the box Introducing SmartVision Installation Keypad Touchscreen and Voice control Accessibility Mode Voice interface Screen reading Home screen The notification status bar Applications Favorites Telephone Messaging E Mail Settings People SOS Function Kapten Assistance Calendar Alarm Clock Camera Calculator Gallery Video Player Magnifier Colors Detections Sound recorder Music Browse
62. ne Search allows search of a message on your smartphone Settings Storage settings transfer your SMS to and from your SIM Card and set the storage capacity with a maximum number of SMS MMS Notification settings set an alert ringing or vibration for an incoming message Text message SMS settings configure text message options Multimedia message MMS settings configure Multimedia messages options Reading an SMS MMS You have received a message which is notified to you by the Messaging icon flagged with a red bubble containing a number on the home screen An alert is also displayed in the notification panel 11 55 AM Tuesday 17 June Phone w Messaging yh E Mail ot Settings x SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Ag To read your received messages from the home screen click on Messaging icon or on New message from the notification panel Messages sent or received are listed by recipient or discussion thread Discussion threads with unread messages are placed on top of the list with a blue triangle To show the content of the message click on the discussion thread you wish in the list Messaging New Message 5 12PM Here is my new phon It was great Sent and received messages are listed in chronological order from newer at the bottom the list to older going up and are colour coded to differenti
63. ne 1 3 5 or 10 minutes Hour indication enables or disables the hour indication in the instructions related to manoeuvers Car navigation settings Routing parameter specifies the criteria used for route calculation Fastest Shortest Enable highways specifies route calculation with or without highways Allow toll roads specifies route calculation with or without toll roads Automatic instruction repeat specifies time interval for navigational messages playback None 1 3 5 or 10 minutes Free navigation settings P O I announcements selects and screens the P O I category to be announced when you get close K Tag announcements selects and screens the various K Tag categories to be announced when you get close Type of announcement defines the POI or K Tag announcement mode when one is nearby No notification Sound alert or voice announcement Cardinal direction information enables or disables the cardinal direction announcements of the current road Automatic instruction repeat specifies the time interval for pedestrian navigation message playback None 1 3 5 or 10 minutes Direct guidance settings Automatic instruction repeat specifies the time interval between direct guidance instructions None 1 3 5 or 10 minutes Direct guidance when destination is reached enables or disables automatic switch to Direct Guidance at the end of a pedestrian or car navigation
64. nnected to a data network 3G type Disclaimer The Kapten application is a navigation assistance system based on SmartVision s positioning system intended for pedestrians but it can also be used in a Car During a navigation session please respect the warnings described herein Whatever your travel mode navigation instructions given by the Kapten application should not free you from respecting the road traffic rules and behave responsibly Your attention should be focused primarily on your environment Stay alert and attentive during your trio and respect other users either pedestrians cyclists motorcyclists or motorists Finally use common sense before obeying a navigation instruction from the Kapten application Carefully observe the signs and the geometry of sidewalks and streets If you are unable to take the direction indicated by the Kapten application it will automatically recalculate your trip from your new position Please note that this product relies on the positioning system of your Smartphone Accurate determination of your position depends on the GPS signal strength which depends heavily on your environment where you are how you carry your handset and also on digital mapping data As a result we cannot guarantee that the instructions given by the navigation system are accurate SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 65 Starting the navigation application From the ho
65. of speech Press and hold the Hash Mark key then press 5 decreases the speed of speech Press and hold the Hash Mark key then press A up key moves to the left for example when browsing through the various categories of the Music application Press and hold the Hash Mark key then press W down key moves to the right Press and hold the Hash Mark key then press volume up key increases the volume of the ringtone Press and hold the Hash Mark key then press volume down key decreases the volume of the ringtone SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 16 Edition mode smartVision allows a quick and easy editor mode This mode allows navigating into an input area to modify or insert a character or a word To edit an input area press continuously on star key and simultaneously press one of keys as follow Continuous press on Star key and short press on selects the whole text Continuous press on Star key and short press on 1 moves the cursor one character to the left Continuous press on Star key and short press on 2 moves the cursor one character to the right Continuous press on Star key and short press on 3 copy the selected text Continuous press on Star key and short press on 4 moves the cursor one word to the left Continuous press on Star key and short press on 5 moves the cursor one word to the right Continuous press
66. of the text to be converted In Page detection mode place your SmartVision on the text press the OK key Hold the handset horizontally and slowly move it up while following the audio instructions until your SmartVision automatically captures the text Optical recognition will start instantly In this mode you have a sound support to keep the horizontality More the beeps are distant from each other near you are from the horizontality In Camera mode frame and focus the text document Take a picture of it by pressing the shutter button Click on Confirm to launch optical character recognition SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 85 From gallery Select a document stored in the photo gallery on your SmartVision Character recognition will start instantly Once the text is converted you can browse it using the up A and down W keys on the keypad You can press the Menu button to access the OCR menu settings languages conversion mode and auto or manual captures From menu you have the choice to read the result line by line or full contain lf the auto detection function fails we recommend that you go back to the OCR menu page and start the procedure over again from the beginning FM Radio SmartVision lets you listen to your preferred radio station Use the various keys to scan the various frequencies To save a preferred station press and hold one of the physical
67. or the telephone network being unavailable Activating the SOS function This application is used to programme automatic sending of an alert such as a phone call or a message or both to one or several contacts chosen by you The SOS is enabled by activating the orange pushbutton located on the back of the phone Push and slide the button downwards as shown Please note the SOS function is disabled by default It must be activated before use If it is not properly activated you will be notified by an alert in the status bar Please note A warning window appears when the SOS button is activated and as the process of SOS is underway SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 63 SOS application set up Before using the SOS function you need to configure the application as follows 1 From the home screen click on Favorites O then on SOS Icon Favorites J Kapten pe Magnifier Assistance SOS SOS _ g Calculator 2 Read the warning and Accept to continue 3 The SOS function configuration screen appears sos SOS button Play analarm Set Phone Numbe CALLS Phone Call mn Answer delay SMS Send Messa 4 The SOS application configuration options are SOS button enables or disables the SOS button on the back of the handset Play an alarm activates the emission of a loud warning signal Set Phone Numbers sets
68. or availability of the accuracy or completeness of responses results and information supplied by the product or of data accessibility You are recommended to make one or several backups of your data stored in your product KAPSYS cannot be held responsible for loss of data resulting from the product malfunction repair or replacement 4 LIMITATION OF LIABILITY Under no circumstances can Kapsys be held liable for any loss or damage of any kind whatsoever direct or indirect general or specific that you or any third parties may suffer that is caused by or related to the use of this instruction manual or the products or services that it describes or any inability to use the product or any of the product s functions Network servers and or cellular system services are provided by third parties via communication systems networks and media on which KAPSYS does not have any control and therefore cannot ensure availability and efficient operation of the same We recommend that you contact directly the relevant providers for any support related to their services SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 88 5 ABOUT SPECIFIC ENERGY ABSORPTION RATE Your SmartVision by KAPSYS is a radio transmitter receiver It was designed and manufactured to comply with the radiofrequency RF exposure thresholds recommended by the European Union The exposure standards for mobile phones are determined by a measurement unit Kno
69. our mobile phone is switched on and connected to a network check for overloaded or unavailable network Make sure the airplane mode is disabled Call quality is poor You can adjust the volume while on a call using the volume up and down Keyon the left side Check the network signal strength indicator in the status bar When I select a number from my contact list the number is not dialled Make sure the number has been correctly saved Make sure you selected the country prefix when calling from abroad My correspondents are unable to leave messages on my voicemail Check with your telephone service provider if this service is available cannot access my voicemail Check if you have correctly entered your telephone service provider s voice mail number click on Phone Menu Settings and Voicemail Try later if the network is busy SIM card locked You have entered 3 incorrect PIN codes contact your telephone service providers to obtain the PUK code smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 92 Technical Specifications Operating System Android 4 0 Design Size 130 x 60 x13 mm Weight 140g Touchscreen capacitive multitouch IPS QVGA 3 5 with automatic backlight management Hardware Sim card format Standard 2FF Connectors Micro USB OTG 2 0 jack audio 3 5mm Cellular connectivity o HSUPA HSDPA 8G o UMTS 3G o GSM 850 900 1
70. r NFC OCR FM Radio Search Downloads Legal notice and Warranty Troubleshooting Technical Specifications SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 oO 0 W N 16 22 29 30 31 33 34 36 42 46 50 57 63 65 78 80 80 80 81 81 81 82 82 83 83 84 84 85 86 86 86 87 91 93 Introducing SmartVision Front panel 09 25 AM Tuesday 17 June E The numeric keypad at the bottom part of the front panel enables you to dial a phone number or type characters for text messaging using multi tap mode 4 control keys are located above the keypad QK key to pick up a call or confirm your entry The two arrow keys A V allow to scroll or browse within a menu or a current page C key to end a call or clear an entry Above these 4 control keys there are 3 easily recognizable Android recessed push buttons Menu Fon the left press to access the ongoing Menu Home cy in the middle press to go back to the Home screen any time Back 7 on the right press to go Back to the previous screen Top The On Off and screen off mode button is located on the top right side of the handset Press and hold this button to start or stop your SmartVision A short key press will set the handset to standby mode and an additional short press will reactivate it On the middle a clip for the necklace Then the audio 3 5 jack on the le
71. r disable a setting or an option Keywords to manage commands and options within an application Keywords about SmartVision s different statuses What time is it Date Keywords Battery level Network status Wi Fi status Bluetooth status GPS status NFC status Ringtone status Phone status Gives the current time Gives the current date Gives the list of all the keywords currently enabled Gives the battery available charge Gives the cellular service s signal strength Gives the Wi Fi current status connected or disconnected Gives the Bluetooth current status connected or disconnected Gives the GPS current status connected or disconnected Gives the NFC current status connected or disconnected Gives the ring mode current setting standard silence meeting Gives the telephone operation mode Wi Fi GPS Bluetooth Not available on SmartVision Lite SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 25 Keywords used for activating a function or a setting Menu Home Back Notifications Activate GPS Deactivate GPS Activate Wi Fi Deactivate Wi Fi Activate Bluetooth Deactivate Bluetooth Activate NFC Disable NFC Activate Standard ringtone Activate silent mode Activate meeting mode Activate outdoor mode Volume up Volume down Opens the menu of the current application Restores the main screen Displays the previous screen
72. r network bandwidth Subsequently the device will reboot automatically until Home screen is displayed and announced Note You must have data connection Wi Fi or 3G enabled to download the software update Because of important size of this update about 1GB we recommend to use the Wi Fi connection for downloading Please do not use SmartVision when the download is in progress lf the device goes to sleep mode during the download process just make a short press on ON OFF button to wake up the device then when the download is complete the upgrade process will start automatically Please note as SmartVision checks for updates on a regular basis you will be instantly informed whenever an update is available However you can also check for available updates manually by selecting the About phone option and System updates from the Settings application SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 56 People The People application acts as a phone book in which all your contacts are found This application has been placed by default in the Favorites list giving you a direct access to the People list How to create a contact You wish to add a new contact 1 From the home screen click on Favorites icon then on People O amp Contacts Add Contact John Smith Kapsys Paul Thomas 2 Select Add Contact a New Contact record appears
73. ress the Back J button to stop it Please note Direct guidance settings see settings can be used to define the frequency of automatic repetition of messages or to enable or disable the Direct guidance mode at the end of navigation smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 71 Free navigation In free navigation mode information on your environment is available in real time Once this mode is enabled the Kapten application announces the street you are on and described the next intersection to you When you get close to an intersection Kapten describes it by giving you the names of streets in the intersection After leaving the intersection Kapten announces the next street you are heading to By default free navigation mode is automatically enabled each time you start a navigation session However this mode can be enabled or disabled as you please by pressing the Menu button from the Kapten application screen Enter the navigatio Pedestrian navigatio Car navigation Direct guidance Map discovery Free navigation As soon as the Free navigation option is enabled or disabled Kapten sends you a message of confirmation that this mode is active or inactive You can configure the Free navigation mode for example Configure the announcement of nearby K Tags and useful addresses Automatically repeat the announcements made by the free navigation mode
74. s automatically disabled after a deletion Managing email accounts You can add edit or remove Email accounts in your SmartVision If you wish to modify an account configuration press the Menu button click on Settings and select the account to be edited If you wish to remove an account press the Menu button click on Settings select the account to be removed then click on Remove account at the end of the list If you wish to add an account press the Menu button click on Settings then on Menu F and lastly on Add account f you wish to change account press the Menu button click on Settings and select the account to be used from the list Please note you can also manage your email accounts from the Home screen by clicking on the Settings icon then on Account amp sync item SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 49 Settings The parameters and settings for your SmartVision can be found under the Settings application This application can also be accessed from the home screen in order to enable and disable specific functions or modify existing settings SmartVision comes with a number of editable default settings such as the time setting the language option the display format etc Editing a setting To edit a setting 1 From the home screen click on Settings The list of settings appears Settings SIM mana
75. s section describes how to configure your Kapten application Press the Menu I button to access the options select the Parameters menu settings are grouped by categories System lets you specify the system settings Pedestrian Navigation lets you specify the pedestrian navigation settings Car Navigation lets you specify the car navigation settings Free Navigation lets you specify the free navigation settings Direct Guidance lets you specify the direct guidance settings Details and update retrieves information about software and map updates Please note you can also access the Kapten application settings by sending the voice command Parameters from this application The System settings are Default Country specifies the default country set for address standard input mode Measurement unit specifies distance and speed units used in the navigation instructions metric and imperial Delete Last Destinations clears the addresses selected from the list of previous trips Restore default settings restores the Kapten application factory settings Reset the Product resets all settings and clears all personal data saved in the Kapten application Recent trips K Tags SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 76 Pedestrian navigation settings Automatic instruction repeat defines the time interval for repeating navigation announcements No
76. session smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 17 Assistance This feature enables you to get support from a third party via a private and secured VPN based server which will have temporary access to your smartphone and assist you in setting up your SmartVision Request of assistance From the home screen click on Favorites then on Assistance l Assistance You can send a sms OR an email to your assistance E mail adores Request assistance Enter the third party s phone number to send him her a SMS or E mail address Click on Request assistance to send an assistance request message that contains your handset s connection information Remote access to SmartVision Once the message has been sent connection is established with the support person Upon receiving the message the support person will download a remote control software VNC type to a pc in order to be able to enter the details server address and password received in the SMS or Email Please note to find out more about VNC compatible applications please visit our websitewww kapsys com under Support and SmartVision by KAPSYS The support person will take control of your smartphone via the pc keyboard and mouse smartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 78 FI CJ key is assigned to SmartVision Menu F button Po J key is assigned to SmartVision Hom
77. t box is displayed in the top bar Enter the first characters of the contact name you want search using the physical or virtual keypad SmartVision shows all contacts matching the search criteria Please note you can also activate the search mode directly from your People list by pressing any key on the keypad Please note you can quickly reach an item in the list of contacts using the keys 2 to 9 on the keypad For example pressing the 6 Bo to select the first contact beginning with the letter M Press twice the 6 m key to select the first contact beginning with the letter N The start and hash mark keys to quickly access the beginning and end of the list SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 60 Import Export contacts To avoid problems with specific format of contacts stored on the SIM card the SIM contacts are not displayed by default in the SmartVision To view edit and use contacts from the SIM card it is necessary to import them previously in the internal memory of SmartVision 1 To import contacts from the SIM card to the internal memory of the phone start the application People Contacts D Ajouter Contact John Smith Kapsys Mary Jonhson 2 Press Menu FI key then Import Export Contact Menu Search New Import export Settings 3 Select the copy source that is your SIM card Copy contacts from
78. te Uninstall application 5 Confirm with Yes SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 34 The Calculator application can now be directly accessed from the Favorites screen Favorites gt Kapten pe Magnifier F g Assistance SOS SOS _ g Calculator Managing Favorites To remove a Favorite application access the Favorites menu click on the application to be removed press and hold the keypad OK key Click on Remove from favorite in the context menu then confirm deletion with Yes To organise your applications within the list click on Up into the list or Down into the list option from the context menu Please note in the same manner as for listing the applications if you wish a matrix format lines columns press the Menu button and click on By matrix SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 35 Telephone The Phone application by SmartVision is a very user friendly feature with a lot of options How to make a call 1 From the Home screen click on Phone R icon the application main screen appears Phone 09 25 AM Tuesday 17 June amp Favorite B People History 2 You can either type your correspondents number using your telephone keypad or retrieve a number from the People application a contact name from Favorite or from the call History
79. the screen to set up your email account verification of the incoming and outgoing email servers Ie Account settings Inbox checking frequency Every 15 minutes Send email from _ this account by default o E 5 SmartVision initiates the verification procedure You must now configure the following options for your Email account Email Fetch frequency Notification Automatic download etc 6 Click on Next to end the procedure Synchronisation of your account is started and your inbox appears Please note some Email accounts may have special configuration options please refer to our websitewww kapsys com section Support for more details SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 Sending an email 1 From the home screen click on the E Mail application The Inbox is displayed 2 Click on Compose nbox smartvisionbykapsys qmail com Compose Equipe Google 3 Jun Premiers pas avec Google Bienvenue dans Google L quipe Gmail 3 Jun Facilitez vous la vie avec la boite de r ception Gmail L quipe Gmail 3 Jun Trois astuces pour profiter au mieux de Gmail 3 Enter the recipient into the To field the subject of your email into Subject and then the full text into Compose email text field For additional options insert an attachment add more recipients etc please refer to the instructions below Compos
80. ts you use the video camera feature to take a video Slideshow lets you view your photos as a slide show Multi select lets you select several items of the gallery to be shared or removed Settings lets you manage the Gallery options image size sorting order and confirmation of deletion for photos and videos Video Player The Video Player application is used to view videos stored in the phone internal memory or a micro SD card On your SmartVision The micro SD is a removable memory card used for storing information it extends the overall storage capacity of your smartphone SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 81 Magnifier smartVision includes a digital magnifier for an enhanced user experience The digital magnifier lets you enlarge text or entire documents and adapts to your visual acuity using the different settings available for the zoom and colour contrasts The digital magnifier is accessed by selecting Favorites then clicking on Magnifier 62 from the home screen Pass your SmartVision above the text to be enlarged move up or down to adjust the sharpness and use number keys 2 and 3 to zoom in and out Additional options are Key 1 increases or decreases the brightness level Key star freezes the screen Key 0 takes a picture and saves it to the gallery Key hash chooses from the 9 colour contrast levels available You can also acc
81. u need To go back to the home screen press the Home key yy the middle button below the display The Home screen presents SmartVision s six basic functions Phone is an application for making calls recording missed calls and accessing your voicemail Messaging is an application for sending reading SMS MMS short message with multimedia attachments such as images photos or videos etc E Mail is an application for sending and receiving emails you will need to have an email account correctly set up amp Settings this application lets you modify the settings on your phone Applications this application shows you a list from which you can access all the applications available on your SmartVision Favorites this application stores all your preferred or most frequently used applications SOS Calculator or Magnifier for example under this special directory SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 30 Whenever one of the above icons appears flagged with a red bubble that contains a number it means there is one or more events for that application such as missed calls or incoming messages The notification status bar The status bar is the first line of icons located on top of the display 09 47 AM Tuesday 17 June Phone w Messaging gt ait 3 ba Settings a Favorites Applications Status icons ar
82. who wears one you may seek advice with your doctor or the manufacturer of the pacemaker for any queries you might have regarding the use of your wireless device Radio transmitting equipment may interfere with the safe and effective use of some medical equipment that may not be adequately protected 3 WARRANTY LIMITATION OF LIABILITY GUARANTOR The guarantor is Kapsys manufacturer of the device with registered office at 790 avenue du Docteur Maurice Donat Mougins Sophia Antipolis 06250 France SmartVision amp SmartVision LITE User Guide Rev 2 5 version SW 1454 8 LIMITED WARRANTY Kapsys warrants to the purchaser that the product complies with the description thereof as shown on www kapsys com website in accordance with the provisions of Articles L 211 1 et seq of the French Consumer Code Kapsys warrants to the initial purchaser that the product from the date of purchase is free from any defects in workmanship and materials when it is used under normal conditions and according to its intended purpose This product is guaranteed for a period of two 2 years and the battery is guaranteed for a period of six 6 months from the date of purchase During this commercial warranty period the product will be either repaired by Kapsys and or any Kapsys approved service provider free of charge or replaced as Kapsys sees fit free of charge This warranty applies to KAPSYS telephone in France where the warranty is r
83. wn as the Specific Absorption Rate or SAR The highest rate according to ICNIRP guidelines for use of the device at the ear is 0 297 W kg over 10 grams of body tissue The SAR limit is set by ICNIRP to 2 watts kilogram W kg averaged over 10 grams of body tissue Tests used to determine SAR levels were carried out on the basis of standard usage modes with the phones transmitting at their maximum power level over the entire range of frequency bands The actual SAR level of a device in operation can be lower than the maximum value as the device is designed to use only the power level required to access the network This value varies depending on a number of factors such as how close you are from a network base station The use of accessories may affect SAR values SAR limits may vary according to test standards and information presentation requirements in application in different countries and according to the network bandwidth 6 CUSTOMER SERVICE For more details please contact your vendor s Customer Service or send us a mail to Service Clients KAPSYS 790 avenue du Docteur Maurice Donat 06250 MOUGINS SOPHIA ANTIPOLIS France You can also visit our website www kapsys com 7 TRADEMARKS Company and product brands referred to in this document and in the manuals are trademarks either registered or not owned by the respective holder Kapsys words brands and logos are registered trademarks of Kapsys SAS Words brands and logos

Kapsys SmartVision Lite User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents