JVC VN-RS800U User's Manual
Contents
1. button Previous position Skip Position Next button Next position Direct Specification Click the Direct button to switch to the Direct Mode Use the numeric keys to move to the specified position Use this method for specifying a position between position numbers 1 to 9 Skip Position Previous Button Skip Position Next Button Home Button Direct Button Select Button Position Selection Area Direct Mode Selection Specification Click the Select button to switch to the Select Mode Use the numeric keys to specify a position number followed by clicking the Enter button to move to the specified position Use this method for specifying a position number larger than 9 Use the Clear button to clear the specification Enter Button Clear Button Position Selection Area Select Mode 16 4 4 Other Controls FOCUS Auto button Near button Far button Auto pan ON button OFF button For adjusting the focus automatically For adjusting the focus towards the Near end Press to start and release to stop For adjusting the focus towards the Far end Press to start and release to stop For turning on the auto pan mode For turning off the auto pan mode 4 5 Switching Camera Selection This allows switching of the selected camera in the same way as the Play Mode Refer to 3 5 Switching Camera Selection for detai2. 1 hour When 1 Day 1Hour is selected search is performed on the interval of 1 day 1 hour prior to the specified Date Time Time Click the Specified button to display the Specify Playback Start Time screen When Present is selected search is performed at the time when the Search button is clicked j i cS Select Camera Button Camera All Selected Span ato Day Hour Select Time Span Button Specified Button _ Present Button _ Specified Button _ aes Present Button Specified Present Specified Date Time Display ay ee ay Proceed Search Condition Setting Screen Proceed Search Button Clicking the Proceed Search button starts search using the preset search condition The number of search results displayed is based on the Search Results Count of the system setting 20 6 4 Alarm Playback Select the alarm search list and click the Play Alarm button to start playback from the time when the alarm occurred Playback is not possible if alarm recording or non stop recording is not preset 7 Saving Video Images 7 1 Saving Export of AVI Recorded images are saved in the specified folders in the AVI format Pausing at the time when export starts after starting playback enables the From button Clicking the From button displays the start position and at the same time enables the To button Similarly pausing at the export end position followed
3. lease or rent the Software to any other person for any purpose 4 Limited Warranty THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND JVC MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE SOFTWARE YOU SHALL BE RESPONSIBLE TO SETTLE ALL SUCH PROBLEMS AT YOUR OWN COSTS 5 Limitation of Liability JVC SHALL HAVE NO LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT OR OTHERWISE FOR CONSEQUENTIAL EXEMPLARY OR INCIDENTAL DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES RELATING TO THE SOFTWARE YOU WILL INDEMNIFY AND HOLD HARMLESS JVC FROM ANY LOSS LIABILITY OR COSTS ARISING OUT OF OR IN ANY WAY CONNECTED TO CLAIMS FROM ANY OTHER PERSONS RELATING TO THE USE OF THE SOFTWARE 6 Term This Agreement will become effective on the date when You install the Software onto Your machine and continue to be in effect until the termination under the reasons as below Should You breach any provision of this Agreement JVC may terminate this Agreement without giving any notice to You In this event JVC may claim against You any damages caused by Your breach Should this Agreement be terminated You should immediately destroy the Software stored in Your machine including erasing it from any memory in Your PC and then will not possess such Software 7 Export Control
4. min Button Playback Range 1 Hour Button Playback Range 1 Day Button 1Day Time Display E n _ Time Display on Left End of ek Bar on Right End of Seek Bar Playback Time Display Skip Range Previous Button Skip Range Next Button Playback Range Specification Area 11 3 4 Playback Operation This is used to control playback operations The Playback Speed Slider is used to specify the speed during Playback Reverse Playback Click the Playback Reverse Playback button to start playback Click the Pause button to pause the playback Click the Next Previous Frame button to display and pause the next image Note When there are no recorded images over an interval of a few seconds a message indicating that there is no image will appear on the screen Playback Speed Slider Reverse Playback Button Play Button Previous Frame Button Playback Control Area Next Frame Button Pause Button Note Refer to 7 Saving Video Images on procedures to save recorded video images in the AVI format 12 3 5 Switching Camera Selection When the Camera Search List button is displayed as Search List the camera list is displayed in the list display area Select the camera list and click the Change Camera button to switch the selected camera Use the List Operation buttons to select the camera list Note To start playback specify a time followed by performing the p
5. right to use the Software is granted by Victor Company of Japan Limited JVC to You only on the condition that You agree to the following Agreement If You do not agree to the terms of the Agreement you may not install the Software INSTALLING OR USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS The Software also includes the associated materials and any modification upgrade and update of the Software granted to You by JVC END USER LICENSE AGREEMENT 1 Copyright Ownership You acknowledge that all copyrights and other intellectual property rights in the Software is owned by JVC and its licensor and remain vested in JVC and such licensor The Software is protected under the copyright law of Japan the United States and other countries and related Conventions 2 Grant of License 1 Subject to the conditions of the Agreement JVC grants to You a non exclusive right to use the Software 2 You may install and use the Software on a HDD or other storage devices incorporated in Your PC 3 You may make a copy of the Software for the back up and storage purpose 3 Restriction 1 You may not modify reverse engineer decompile or disassemble except to the extent as permitted by the applicable laws the Software in any manner 2 You may not copy or use Software in whole or in part other than as expressly specified in this Agreement 3 You have no right to grant a license to use the Software and may not sell
6. the remaining provisions will remain in full force and effect 4 The Agreement shall be governed by and interpreted under the laws of Japan The Tokyo District Court has jurisdiction over all disputes which may arise with respect to the execution interpretation and performance of this Agreement Content Rg MRI Red NR EUTII sccccseccsnccnseccnsecencscenvsceassessscensnsensecencscensscsacsesacsesascensscensecenssceacecs Ae lst LOO IN EPEA E E E A A E aurea ns wade aaa E E EE A A Te WI SSE PAU ON ZATION esia a a a a haan sates aes rA a A 2 te Evevideo image DIS DIA nornen aa E a O E es T 2 2 Video Image LAVO Ule aencnigan a a EE a R E AA E PFGE CONI O osia r A a A TT OEE EES oosooseossosseosorsereenreoseossoasossossossosssosessessersessessersssssosesssessoss 3 L Playpack ol Recorded Video IIMaGeSiisic scadekdeistwslecsssdscarusweRincasddedesushantsaacsdsbaburse cascode 22 Playback Stan TIME esgan aA AT A E E EAA AER 10 OTe FAV ACK RINGO ae A E O T 11 2A Playa cK OPTION ree E ENA ET A AT T 12 3 5 SWiLching Camera Selec enida a a a a a a tae setae 13 a o o 14 AC Alera CoNo aenea E N A O oceahatee 14 ZW OUIC HN GO Ml Ol iaer ea EOE E AEE EE E AE O 15 A POSMOS oclo CUON nie a A a A r a 16 AA OET COMMONS iorri r e T E O A alee eect 17 4 5 Switching Camera Selection eesesessssrserersserssecrsreessecssressecsssresserssecssrcesrecsserssrcrsseesseresrersacssscrsseesseresseeos 17 A o scccoscccon
7. 13 19 41 22 192 168 20 20 C020 EMG REC 2 2006 2 13 19 41 22 192 168 10 141 C655 EMG REC 1 2006 2713 19 41 22 192 168 10 1 40 C625 EMG REC Camera Switch Alarm List Area Change Camera Button Camera Alarm List Button List Operation Button 19 6 3 Alarm Search Set to the Play Mode to search previous alarms When the Camera Search List button is displayed as Camera List the search list is displayed in the list display area Note Clicking the Camera List button switches the list display area to the camera list Clicking the Search List button restores the list display area to the search list List Display Area Alarm 1 2006 1 2113 19 47 56 192 168 10 140 C625 EMG REC 2 2006 12 13 19 47 51 192 168 10 140 C625 EMG REC VT 2713 19 47 40 192 168 10 140 C625 EMG REC View aati Button j Par TTANCE S EMG REC La 192 168 10 140 C62 EMG REC Search Button _ mn rT Search Button ije 4 10 140 C625 EMG REC 18 4 47 31 192 168 10 140 C625 EMG REC Condition Setting Button Camera 19 ye 68 10 140 C525 MG REC SnNnCH GH GF dM AFA ran 4 a in d ANCA Chi crm es Camera List Camera Switch Alarm Search Area Camera Search List Button List Operation Button Click the Condition Setting button to display the Condition Setting Screen Camera All or selected camera Span Search within the specified time span All or 1 day or
8. JVC Recording Server Software VN RS800U Viewer User s Guide LST0574 001C Getting Started Thank you for using the VN RS80OU recording server software henceforth VN RS800 The VN RS800 recording server is comprised of the various groups of services that provide the different functions the VN RS800Viewer viewer application software and the VN RS800Setup setup tool This user s guide provides descriptions on the operating procedures of the VN RS800Viewer Refer to the VN RS800 Setup Manual for procedures on installing and setting up the VN RS800 recording server Main Features of VN RS800Viewer Displaying live images of the VN RS800 video recording server Playing back video images of the VN RS800 video recording server Controlling the camera of the VN RS800 video recording server Precautions Specifications of this product may be revised for improvement without prior notice This product includes software developed by the Apache Software Foundation http www apache org This product includes software written by Tim Hudson tjh cryptsoft com This product includes software written by Eric Young eay cryptsoft com This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org Please carefully read this End User License Agreement Agreement before installing or using the Recording Server Software VN RS800 Software on your PC The
9. Mode Screen Time Recording Mark 00606127 09 07 11 _ ir C20 1 Camera Name Details displayed on live images 2 2 Video Image Layout Use the Select Video Layout Button at the bottom left of the screen to select a layout according to the number of video images you want to display Upon clicking a video image screen its frame will appear in green This indicates that the image is selected henceforth referred to as the selected camera Clicking each of the layout buttons changes the number of video images Page including the selected camera is displayed When in the 5 screen or 12 screen mode the Zoom Area function is available on the top left of the screen The Zoom Area function enables enlarged display of the selected camera s video images Click the Zoom Area or image of the selected camera to switch to the 1 screen mode Clicking the video image on the single screen returns the display to the previous layout Note When the single screen is selected by clicking the 1 Screen button clicking on the video image does not restore the display to the previous layout Video Layout Selection Area 2 3 Page Control When the number of registered cameras is larger than the number of video images of the layout images of all cameras can be displayed via page control The total number of pages is No of registered cameras No of images of layout For the zoom areas in the 5 screen or 12 screen mo
10. You agree that You will not ship transfer or export the Software or underlying information and technology to any countries to which Japan and other relevant countries embargoed goods 8 U S Government User If You are an agency of the United States of America the Government You acknowledge JVC s representation that the Software is a Commercial Item as defined in Federal Acquisition Regulation FAR part 2 101 g consisting of unpublished Commercial Computer Software as those items are used at FAR part 12 212 and is only licensed to You with the same use rights JVC grants all commercial end users pursuant to the terms of this Agreement 9 General 1 No modification change addition deletion or other alteration of or to the Agreement will be valid unless reduced to writing and signed by an authorized representative of JVC 2 To the maximum extent permitted by the applicable law where the Software was acquired any conditions or warranties imposed or implied by law are hereby excluded You may nevertheless have the benefit of certain rights or remedies pursuant to the applicable law in respect of which liability may not be excluded In any case however JVC s entire liability will be limited to the replacement of the defective media containing the Software within six 6 months after Your acquirement of the Software 3 Even if any part of the Agreement is held invalid by or in conflict with any law having jurisdiction over this Agreement
11. by clicking the To button displays the end position Click the as AVI button to start saving Note The time interval that can be specified between the start and end positions is between 10 seconds to 10 minutes From Button Start Position Display AVI Saving Area During Setting of Start End Positions Some time is required to save the images and this is indicated by the progress bar Click the Cancel button to stop saving Cancel Button AVI Saving Area During Saving Note Saving continues even upon exiting the VN RS800Viewer 7 2 Saving of Still Images Recorded images are saved in the specified folders in the JPEG format Pausing at the time when saving the still image after starting playback enables the as JPEG button Click the as JPEG button to start saving 21 JVC is a registered Trademark owned by Victor Company of Japan Limited JVC is a registered Trademark in Japan the U S A the U K and many other countries COPYRIGHT 2007 Victor Company of Japan Limited 22
12. de image of the selected camera continues to be displayed when the page number is altered Click the Auto SW button to select whether to start stop the Automatic Page Switch Feature Selected Camera No Display Displayed Page Total No of Pages Display First Page Button Previous Page Button Next Page Button Last Page Button Auto SW Button Page Control Area Example Camera numbers displayed on each page when 16 cameras are registered Layout Page1 Page2 Page3 Page4 Page 16 Screen 1 2 3 A a 4 Screen 1 4 5 8 9 12 13 16 9 Screen tote gt e gt s 16 Screen 1 146 J gt J J gt J 5 Screen 1 5 6 10 1 15 16 12 Screen 1 12 12 16 3 Playing Recorded Video Images 3 1 Playback of Recorded Video Images Click the View Records button on the top left of the screen to switch to the Play Mode The Play button can be clicked only when a camera is selected Clicking the button plays back video images recorded in the selected camera View Records Button Alarm Button LiveCam Camera security System a ee oOo Playback Start Time Specification Area Playback Range Specification Area Playback Control Area Change Camera Alarm Search Area fo CameraName 1 192 168 20 80 CH1 2 192 168 20 80 rrr 3 092 168 20 80 CH3 4 192 168 20 80 CH4 Pla
13. ecccveccacsccessevessecssssosscceveccevecnecsevessecssscosesscvaccavecnessenessenessecesseosscoevecnassess 18 9S 1 Emergene y IRCCONGIING kerasa a a a A A A ane ie 18 A E E E E E AE E I EA EE 19 O R AIIM RECeHUON nennir nT a a OR ee ee en 19 OLAM DIS DAY a a T N 19 O Ao EO ea E A A E T 20 64 Alami Fr NAV AC uran a a E TAA E aac O 21 A o rea rte se re er en eee eee 21 Pies ING he OO OLA ol cas trccen tender enti e e A a ne 21 TZ SAVING OF OU IMAGES airiran E E E a 21 lt Trademarks gt Microsoft and Windows are the registered trademarks or trademarks of Microsoft Corporation U S A in the United States and other countries Other company and product names are the registered trademarks and trademarks of the respective companies Registered trademark trademark and copyright symbols are not included in this manual 1 Starting Up the VN RS800Viewer 1 1 Login Double click the VN RS800Viewer icon on the Desktop screen or click Start Programs JVC VN RS800 VN RS800Viewer to start the VN RS800Viewer Select a user name enter the password and click the OK button The application is launched upon verifying the user When entering the password pressing the input button displays the software keyboard for entering the password To use this screen make sure to set a password using numerals only Note It is possible to start without verifying the user by Windows authentication Password User Selection Inpu
14. ilt Button Pan Button Zoom Area Zoom In Button and Zoom Out Button appears on the image Using this enables easy control of the camera s orientation and zoom functions Direction gt Drag within the Direction Control area and the direction of the camera will make the corresponding adjustments automatically The camera turns horizontally continuously when the Pan Button is pushed while it is pushing The camera turns vertically continuously when the Tilt Button is pushed while it is pushing Zoom Drag within the Zoom area the camera will zoom out when dragging it for above and the camera will zoom in when dragging it for below The camera zooms in continuously when the Zoom In Button is pushed while it is pushing The camera zooms out continuously when the Zoom Out Button is pushed while it is pushing The continuous operation button can adjust the speed by dragging it while pushed from the position in which the button was pushed The speed quickens when dragging it outside The speed slows if it drags it internally Tilt Button Zoom In Button Pan Button Zoom Area p pg b e a Touch Control Area Direction Control Area Zoom Out Button 4 3 Position Selection Position selection is enabled when the VN C30 C625 C655 E4 A1 With Dome Camera cameras are selected Home button Home position Skip Position Previous
15. layback operation List Display Area No CameraName 08 192 168 10 141 C655 192 168 20 20 C20 192 168 20 21 C20 192 168 10 172 C10 192 168 10 130 A1 e Change Camera Alarm Search Area Change Camera Button List Operation Button Camera Search List Button When the Camera Search List button is displayed as Camera List the search list is displayed in the list display area Refer to 6 3 Alarm Search on procedures to use the search list Note Clicking the Search List button switches the list display area to the search list Note Clicking the Camera List button restores the list display area to the camera list 13 4 Controlling the Camera 4 1 Camera Control Click the Camera button on the top left of the screen to switch to the Camera Control Mode The Camera button can be clicked only when a camera is selected Note Functions that are controllable vary with the camera type of the selected camera Camera Button Alarm Button Touch Control Button Security System 99 No CameraName Auto pan 1 192 168 20 80 CH1 21 192 168 20 80 CH2 3 192 168 20 80 CH3 A 192 168 20 80 CH4 Camera Control Mode Screen Position Selection Area Touch Control Area Other Control Functions Area Change Camera Alarm List Area 14 4 2 Touch Control Upon clicking the Touch Control button the frame indicating the Direction Control Area T
16. ls 17 5 Emergency Recording 5 1 Emergency Recording Click the Emergency Recording button to start emergency recording of all currently displayed live video images and the selected camera Live Mode Emergency recording of all currently displayed live video images Camera Control Mode Emergency recording of the selected camera If a camera is selected during the start of emergency recording the remaining time of emergency recording will be displayed Click the Stop Emergency Recording button to stop all emergency recording operations Pressing the Start Emergency Recording button during emergency recording resets the remaining time of all cameras for which emergency recording is in progress Example When the Emergency Recording Time is set to 300 seconds Pressing the Start Emergency Recording button when the remaining time is 200 seconds resets the remaining time to 300 seconds As VN RS800 regards emergency recording as a type of alarm information will be displayed on the alarm button Start Emergency Recording Button Stop Emergency Recording Button ining Time Di Instant Rec Remaining Time Display aati Emergency Recording Control Area Note Emergency recording is terminated upon exiting this application 18 6 Receiving Alarms 6 1 Alarm Reception When an alarm is received the Alarm button on the top of the screen starts blinking and the alarm infor
17. mation is displayed Blinking will continue for 30 seconds When displaying live video images of the Recording Camera in the alarm event settings alarm information is also displayed on the image This display will remain displayed over the interval specified in the Alarm Display Time of the alarm event settings Alarm Button 6 2 Alarm Display Clicking the Alarm button when it is blinking switches to the Camera Control Mode with the Recording Camera in the alarm event settings selected In this case the touch control feature is disabled When the Camera Alarm List button is displayed as Camera List the alarm list is displayed in the list display area Alarms received when VN RS80O0Viewer is running will be added to the alarm list Select the alarm list and click the Change Camera button to switch the selected camera to the camera specified in the Camera Name field Use the List Operation buttons to select the alarm list Note The camera displayed in the Camera Name field of the alarm list is the Recording Camera in the alarm event settings Notes Clicking the Alarm List button switches the list display area to the alarm list Clicking the Camera List button restores the list display area to the camera list List Display Area No DateTime Camera 5 2006 2 13 19 41 22 192 168 10 1 72 C10 EMG REC 4 2006 12713 19 41 22 192 168 20 21 C20 EMG REC 3 2006 127
18. t Button VN RS800 Viewer Version 1 0 1 2101 Copyright C 2006 Victor Company of Japan Limited User Verification Screen Software Keyboard Screen 1 2 User Authorization User authorization restricts the operations after starting up the application Control not authorized Unable to switch to the Camera Control Mode Playback not authorized Unable to switch to the Play Mode Emergency recording not authorized Unable to perform emergency recording Export not authorized Unable to export AVI files 2 Displaying Live Video Images 2 1 Live Video Image Display Click the Live Cam button on the top left of the screen to switch to the Live Mode Doing so displays the current image of the specified camera Information such as time camera name and the Recording mark can be displayed on the images Clicking the Info button on the top right of the screen switches display of the information in the following order Display Recording mark only Display Recording mark and camera name Display all Live Cam Button Alarm Button Info Button Security System g p iB t LA SE orttir teit Hb t A ee n a a PEERAA i areant ea tat c20 1 A m c20 2 2006 06 27 09 01 48 2006 06 27 09 01 48 Po F gt E at reri eN E SEEE i na E a A ti sam Emergency Recording Control Area Time Left Video Layout Selection Area E4 1 CHI Live
19. y Mode Screen AVI Saving Area JPEG Saving Area 3 2 Playback Start Time Click the Present Time button to start playback of the latest recorded video images Note The latest recorded video images are about 40 seconds before the system time Click the Specified Time button to display the Specify Playback Start Time Screen Specified Time Button Playback Start Time Specification Area Enter the time and click the OK button to start playback from the specified time Present Time Button Today Button Clear All o A EAO J lejesaes l i Time 4 ES ES m Specify Playback Start Time Screen 10 Present Time Button Clear All Button Clear Sel Button 3 3 Playback Range Operate the playback range accordingly to play back the video images of a specific time that you want to view The Playback Range 10 min 1 Hour 1 Day buttons are used to select the range of the seek bar For example when 1 hour is selected the time range from the left to the right end of the seek bar represents a duration of 1 hour The Skip Range Previous Next buttons are used to slide to the previous or next seek bar range For example when the seek bar range is at 9 00 10 00 clicking the Skip Range Next button shifts the seek bar to the 10 00 11 00 range Sliding the seek bar changes the playback time Playback will start from the time where you stopped sliding Playback Range 10
Download Pdf Manuals
Related Search