JVC LST0601-001B User's Manual
Contents
1. Live Settings Setting the Live Image Display Rate Select Same as recording or Same as speedup as the live image display rate in Live Settings e When Same as speedup is selected the Frame Rate specified in Speedup Settings is used as the live image display rate e When Same as recording is selected the Frame Rate specified in Recording Settings is used as the live image display rate Memo e Use SKIP to move between the items e Use the 2 and 10 0 buttons to select the item to configure e To enter numeric characters press the SELECT button to turn on the light of the SELECT indicator Upon entering the numeric characters press the PTZ PRESET button to turn on the light of the PTZ PRESET indicator Use the SKIP button to select OK followed by pressing the 16 ENTER button 11 Repeat the procedures 9 for each camera 12 Use the SKIP button to select Close followed by pressing the 16 ENTER button e Setting is complete and the Live screen appears e The REC CONTROL indicator lights up and recording starts in the recording control mode Live Screen 15 Basic Operation Viewing Live Images via Front Panel Control This section describes the procedures for viewing live images by using the front panel of VR N1600U E Live Screen Displaying the Live Screen 1 Press the L2. SKIP Button Playing Back Press the PLAY button e Playback starts from the date time indicated in Master Time of Time Navigation e Images are played back according to the angle of the shuttle dial x1 20 x1 5 x1 x2 x5 x10 x20 Master Time area Tuesday July 24 2007 1 00x 11 21 33 343 AM aa i4 1 i Lal Lal 4 1 gt Back Time Forth 4 p Playback Slow u Fast m ye Browse Screen Skip gaps during playback 772472007 11 21 33 aM _ cote Go To Button Time Navigation Section Skipping Press the SKIP button e The SKIP buttons have the following functions S Moves to the first image in the previous sequence Moves to the oldest image in the database of the selected camera when the button is pressed and held down T Moves to the first image in the next sequence Moves to the first image in the next sequence When pressed and held down moves to the latest image in the database for the selected camera Memo e Sequence indicates a certain block of images that are recorded during motion detection e Recorded images are stored in the database Note e The SKIP buttons are only enabled when a camera has been selected e During simultaneous recording and playback an After Database End message may appear as playback catches up with recording during playback near the current time
3. LAN2 Surveillance computer IP cameras Computer for configuring cameras Memo e Connect LAN1 to the camera network e LAN to the surveillance computer network e For details of the protocol and port number for the network cameras on the LAN1 network refer to the network camera s user manual e The protocol and port number used on the LAN2 network are shown below e Surveillance computer HTTP 80 e Mail SMTP 25 POP 110 e Connect NAS to the LAN1 network Switching Switching HUB HUB SERIAL e You can connect up to 16 cameras e You can connect up to 10 surveillance computers UPS control Note e Connect only after having turned OFF the power of all devices e Set the IP address of the camera to 192 168 0 xxx When setting the IP address of the camera to an address other than 192 168 0 xxx you must also change the IP address of LAN1 Refer to the Instruction Manual of each camera for procedures to change the camera s IP address 11 Preparation System Connection Example continued Note e Do not connect LAN1 to the internet If the internet is busy or the relay equipment fails you may not be able to save important camera images To maintain full recording capacity it is recommended that a dedicated network be used Be sure to connect the LAN1 camera network to the same segment Do not use the address
4. COMMON signal ground terminal Same as SIGNAL GND signal ground terminal This is a common ground terminal Connect it to the signal ground terminal on the connected device This can be used when there are insufficient common ground terminals Memo e Do not use this terminal for protective earthing Getting Started Part Names and Functions continued Rear I O Terminals Terminal Remarks ALARM Make IN 250 ms 9250 ms N Contact gt and above 4 andabove Input Make Break Memo e Set the impedance at the output end to 10kQ or below EMER Make GENCY Contact BIALARM Input RESET 250 ms and above Memo e Set the impedance at the output end to 10kQ or below EXT REC Make IN y250 ms Contact Jand above Input Memo e Set the impedance at the output end to 10k or below OPE ON Make OFF Contact Input p isan 4 lt lt above Approx 50 ms OPE ON OPE OFF Memo e Set the impedance at the output end to 10k or below DIREC Auto TALLY Break Collector ALARM Make q pOutputIn 4 Output Ban Output In Progress DEISV 10 WARN mA an ING OUT Progress below OPTION S OUT1 External Pull up Level OPTION The make contact is formed using OUT2 the individual output terminals and the COM terminal Turning off the power of VR N1600U
5. Setting screens on the main menu e PTZ mode Keypad For selecting a menu item 2 10 0 e Camera selection keypad mode e For entering numeric characters Enter number using 1 to 10 0 buttons 0 is input when 10 0 button is pressed Live image display and recorded image playback screens e Camera selection keypad mode For selecting a camera number Upon selecting the indicator corresponding to the selected camera input lights up e PTZ keypad mode live image display screen only Moves the camera in the direction indicated by the arrow 1 W 2 4 3 a 5 4 7 9 110 0 4 11 Use the 6 HOME button to move the camera to the home position e Preset keypad mode live image display screen only For selecting the preset position 1 to 9 10 to 19 can be selected when 10 0 is pressed at first During search for recorded images For narrowing down the search using a date month week or time e Enter number using 1 to 10 0 buttons 0 is input when 10 0 button is pressed During display of software keyboard e Selection keypad mode For entering numeric characters 0 is input when the 1 to 10 0 and 10 0 buttons are pressed e PTZ keypad mode live image display screen only Moves the mouse pointer in the direction indicated by the arrow Press 1 w 2 3 7 5 7 gt 9 10 0 11 or 6 HOME to move to the center of the screen 13 C
6. NETWORK VIDEO RECORDER VR N1600U STARTUP VR N1600E NETWORK VIDEO RECORDER VR N1600 C WARNING ooo M REC ooo ED ana oon ooo FUNCTION SEARCH KEY ALARMCLEAR RECISTOP STOP PB PLAY RR 00 0 Powered by Milestone Please read the following before getting started Thank you for purchasing this JVC product Before operating this unit please read the instructions carefully to ensure the best possible performance For Customer Use Enter below the Serial No which is located on the body Retain this information for future reference Model No VR N1600U Serial No LST0601 001B IMPORTANT SAFEGUARDS ONS Ou 10 11 12 13 14 15 16 17 18 19 Read all of these instructions Save these instructions for later use All warnings on the product and in the operating instructions should be adhered to Unplug this appliance system from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning Do not use attachments not recommended by the appliance manufacturer as they may cause hazards Do not use this appliance near water for example near a bathtub washbow l kitchen sink or laundry tu
7. RED colour indications on the operation panel are provided but they are not safety related RED colour indications 1 For Recording Indicator 2 For Alarm Indicator 3 For Warning Indicator WARNING For PLUGGABLE EQUIPMENT the socket outlet shall be installed near the equipment and shall be easily accessible WARNING It may be unlawful to record or playback copyright material without the consent of the copyright owner Information for Users on Disposal of Old Equipment European Union This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end of life Instead the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment recovery and recycling in accordance with your national legislation By disposing of this product correctly you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health which could otherwise be caused by Attention inappropriate waste handling of this product For more information about collection point and recycling of this This symbol is product please contact your local municipal office your household waste disposal service or the shop where only valid in the you purchased the product European Penalties may be applicable for incorrect disposal of
8. LIVE Reboots the NVR Viewer and the BROWSE internal distribution server Press and hold to log out FUNCTION 5 For controlling the PTZ camera FUNCTION 6 Displays the maintenance information screen FUNCTION 8 Sets whether to display the HDD meter or not SEARCH Button Displays the date and time search screen when in the playback mode e Page 18 KEY Button Press to display or hide the software keyboard Memo e Use the software keyboard to input characters ALARM CLEAR Button Clears the ALARM display when an event occurs or motion is detected Press and hold this button to turn off the WARNING indicator REC STOP Button Press to start recording in all cameras When in the recording control mode pressing this button exits the recording control mode and starts recording on all cameras To stop recording press and hold the button When in the recording control mode press and hold this button to exit the recording control mode Memo The manual recording mode executes recording from all cameras regardless of the settings in the Camera Record Setting Recording is carried out in accordance with the frame rate selected in Camera Record Setting STOP PB Button Stops playback when you press this button in the playback mode PLAY Button Plays back at the speed and in the direction specified by the Shuttle Dial position SKI
9. ee eee eeeeeeeeeeeeeeeeeteeeeneeeneeees 12 Basic Operation Viewing Live Images via Front Panel Control 16 Displaying the Live Screen unnenennennn 16 Select VieW nasri emoi nn 16 Select a Camera urnsensseernsennnnnnnnnnnnnnnnnnnnnnnennnnn nn 16 Operating the Camera unnsensnsennnensnnennnnnnnnn nennen 17 Playing Back Recorded Images via Front Panel Control 2snernen nennen 18 Select aVieW 4 0 0 18 Searching Recorded Image Using a Specific Date Time e 18 Playing Skipping and Stopping Recorded Images 18 Adjusting the Playback Speed Jog Shuttle Playback 00 ceeceeeeeeeeeeeeeeeeeeeaes 19 Others Troubleshooting 2 ceeeeeeeeeceeeseeeeeseneeeeeeeeneeneeseseeeneeneenenes 20 Specilications x kAntesinciate Rent oie eae 21 Getting Started Precautions for Proper Use of this Product Locations of Storage and Use Do not store the unit at the following places Doing so may cause the unit to malfunction or break down Hot or cold places beyond the allowable operating temperature 5 C to 40 C e Humid places beyond the allowable operating humidity 30 RH to 80 RH no condensation e Places that emit a strong magnetic field such as near transformers and motors e Places near devices that emit radio waves such as transceivers and mobile phones e Places with considerable dust and sand e Places with strong vibration
10. rfen Sie diese ffnungen auf keinen Fall blockieren oder abdecken Die ffnungen k nnen beispielsweise blockiert werden wenn Sie das Ger t auf ein Bett ein Sofa einen Teppich oder einen hnlichen Untergrund stellen Dies darf auf keinen Fall geschehen Das Ger t sollte niemals in der N he oder ber Heizger ten oder anderen Ger ten die W rme abstrahlen aufgestellt werden Geschlossene Aufstellungsorte wie B cherregale eignen sich nur dann zur Aufstellung des Ger tes wenn eine ordnungsgem e Bel ftung jederzeit gew hrleistet ist Das Ger t ist mit einem Schutzkontaktstecker einem Stecker mit Erdungsb geln an beiden Seiten ausgestattet Dieser Stecker l sst sich nur in eine geerdete Schutzkontaktsteckdose einstecken Dies dient Ihrer Sicherheit Falls sich der Stecker nicht problemlos in die Steckdose einstecken lassen sollte lassen Sie die veraltete Steckdose von einem Elektriker austauschen Versuchen Sie niemals die Sicherheit die Ihnen ein Schutzkontaktstecker bietet auf irgendeine Weise au er Kraft zu setzen Um das Ger t w hrend eines Gewitters oder f r einen l ngeren unbeaufsichtigten Zeitraum zu sch tzen ziehen Sie den Netzstecker aus der Steckdose und trennen Sie die Antenne oder das Kabelsystem ab Dadurch vermeiden Sie Produktsch den die als Folge eines Blitzeinschlags oder Stromstosses auftreten k nnen Sorgen Sie daf r dass nichts auf dem Netzkabel zu liegen kommt Platzieren Sie das Ger t nicht an S
11. E A Terminals Hinweis Verwenden Sie dieses Terminal nicht f r eine Sicherungserdung Einbau des VR N1600E in einem EIA Rack mit Montageklammern 1 Montieren Sie die seitliche Klammer mit M4 Schrauben an der rechten und linken Seite Diese Schrauben sind im Lieferumfang des VR N1600E enthalten 2 Entfernen Sie 4 Schrauben und 4 F e vom Boden des VR N1600E 3 Befestigen Sie diese mit M5 Schrauben am Rack Diese Schrauben sind im Lieferumfang des VR N1600E enthalten Achtung Stellen Sie keinerlei Gegenst nde auf den VR N1600E wenn dieser in einem Rack montiert ist Dies kann durch Ungleichgewicht zum Herunterfallen des Recorders f hren und Verletzungen oder Sch den verursachen Werden zwei oder mehrere Recorder in dem Rack eingebaut achten Sie darauf dass der Abstand mindestens die Gr e eines Recorders betr gt Bauen Sie den VR N1600E nicht in ein Rack ein wenn die Umgebungstemperatur 40 C oder mehr betr gt e Achten Sie beim Einbau in einem Rack darauf dass die Innentemperatur der Rack Einheit 40 C oder weniger betr gt Wenn Sie das Ger t in einem Rack montieren halten Sie einen Abstand von mindestens 15 cm zwischen Rack und der R ckwand des Ger tes ein Beachten Sie im Fall eines Einbaus oder Wartung dieses Ger ts in einem Rack die speziellen Vorsichtsma nahmen um sicherzustellen dass das System nicht an Stabilit t verliert Folgende Richtlinien dienen zur Sicherstellung Ihrer Sicherheit Ist dieses
12. e When recording is set to be triggered by motion event VR N1600U E will not start recording unless a motion event occurs During playback near the current time however the image that is not recorded will also be played Stopping Press the STOP PB button e Playback stops Enlarging the Display e Pressing a number that corresponds to the selected camera enlarges the display e To restore display to the normal size press the number of the camera with enlarged display Adjusting the Playback Speed Jog Shuttle Playback You can adjust the playback speed by turning the jog dial shuttle dial on the front panel E Shuttle Playback e Rotate the shuttle dial during playback or when playback is paused to start fast forward fast reverse or slow playback still ar Nia Shuttle dial Outside Jog dial Inside Jog Shuttle dial Memo e The playback speed that is indicated during fast forward or fast reverse playback by rotating the shuttle dial is an approximate value The speed may differ depending on the conditions such as the playback mode multi view single view and the recording mode motion detection recorded frame rate E Jog Playback e Rotate the jog dial to play back frame by frame e Rotate the dial clockwise to play back a single frame in the forward direction and rotate the dial counterclockwise to play back a single frame in the reverse direction e Release the dial to
13. pause the playback However when frames are played back successively in the forward or reverse direction playback may continue momentarily after the jog dial is released Note The jog dial is only enabled when a camera has been selected e When the playback speed is adjusted or when playing back at high speed during recording the frame rate of the recording may decrease Check the performance meter while adjusting the playback speed to ensure that the display does not turn red 19 Others Troubleshooting Symptom Action Power cannot be turned on Check to ensure that the power cable has been plugged in correctly Check to ensure that the power switch on the rear panel is switched on Camera is not automatically detected Follow instructions in the camera s Instruction Manual to check the IP address settings When the IP Lease feature is in use turn off and on the power of the camera when VR N1600U E is started up Unable to control using REC and PLAY Check to ensure that the operation lock is not turned on Images are not recorded in the recording control mode Check the Camera Recording Settings Check to ensure that the scheduler is set to online Check to ensure that the camera is in the recording control mode Unable to play back audio sound Check to ensure that the audio item of the camera device is set to Enabled in the Camera Record Setting menu Che
14. service personnel under the following conditions a When the power cord or plug is damaged or frayed b If liquid has been spilled into the appliance c If the appliance has been exposed to rain or water d If the appliance does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation e If the appliance has been dropped or the cabinet has been damaged f When the appliance exhibits a distinct change in performance this indicates a need for service When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards Upon completion of any service or repairs to this appliance ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition SAFETY PRECAUTIONS for USA RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilatera
15. AL1 to 4 serial terminals 1 to 4 For connecting the communication control terminals on a mouse sold separately flash memory sold separately UPS sold separately or additional disk drive sold separately 28 LAN2 LAN2 connection terminal Intranet For connecting to the remote PC network using a LAN cable Color Status Left Off Communication at 10 Mbit Indicator second Green On Communication at 100 Mbit second Orange On Communication at 1 Gbit second Right Off Not connecting to the network Indicator Yellow Blinking Communication is in progress Connector cover Memo e Do not remove the cover Signal input output terminals For operating VR N1600U E using external alarm signals or signals received from external devices or for operating external devices by outputting signals Memo e Diameter of applicable cables AWG22 to AWG28 Rear I O Terminals S To COMMON COMMON 5 ALARM IN T 3 LANT LAN 2 ae gg 3 4 ion sen SIGNAL GND E Input ports D ALARM IN 1 to 8 alarm input termi
16. ANCEL Setting screens on the main menu Cancels the selection 14 ZOOM OUT Live image display and recorded image playback screens e PTZ keypad mode live image display screen only Zooms out Preset keypad mode For selecting the next view e Press the 14 ZOOM OUT button while holding down the FUNCTION button to change the resolution of VGA output 15 Z00M IN Live image display and recorded image playback screens e PTZ keypad mode live image display screen only Zooms in Preset keypad mode For selecting the previous view e Press the 15 ZOOM IN button while holding down the FUNCTION button to change the resolution of VGA output 16 ENTER Setting screens on the main menu Confirms the selection During display of software keyboard To perform the mouse click operation 20 LIVE BROWSE Button Indicator Switches between the Live mode and Browse mode The indicator lights up when in the Live mode Pressing the LIVE BROWSE button when the wallpaper screen is displayed shows the Live screen Press and hold the FUNCTION button and press the LIVE BROWSE button at the same time to reboot the NVR Viewer and the internal distribution server Press and hold the FUNCTION button and press the LIVE BROWSE button at the same time to log out of the system Memo e When Auto Logon is enabled the login operation starts automatically immediately after logging out Getting Started Part
17. E TO RAIN OR MOISTURE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION REMARQUE La plaque d identification num ro de s rie se trouve sur le panneau arri re de l appareil CAUTION RED color indications on the operation panel are provided but they are not safety related RED color indications 1 For Recording Indicator 2 For Alarm Indicator 3 For Warning Indicator SAFETY PRECAUTIONS for Europe IMPORTANT In the United Kingdom Mains Supply AC 220 V to 240 V WARNING THIS APPARATUS MUST BE EARTHED The wires in this mains lead are coloured in accordance with the following code GREEN and YELLOW EARTH BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured GREEN AND YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the safety earth symbol or coloured GREEN or GREEN AND YELLOW The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or which is coloured BLACK The wire which is coloured BR
18. E switches the output of the output terminals to break 10 Mounting to a Rack Use the supplied rack mount bracket to mount VR N1600U E to the EIA rack Mount the rack mount bracket using screw 1 e Use the 4 screws M4 x 10 mm supplied to fasten VR N1600U E at the two sides 2 Remove screws 2 of the foot 4 pes at the bottom e Remove the foot 3 Mount to the rack using screws e Use the 4 screws M5 x 11 mm supplied to fasten this unit to the rack Rack Mount NN Bracket 7 Le W 4 Locations Note e Do not place any object on the VR N1600U E unit that has been mounted to the rack Doing so may cause it to lose balance and drop or fall hence resulting in injuries or damages e When mounting 2 or more units of VR N1600U E to the rack make sure to mount it at a distance that is at least equivalent to one unit Preparation System Connection Example The following operations are possible with this system e Surveillance live image recording and playback by connecting up to 16 cameras e Checking recorded images on the VGA monitor e Recording Playing sound e Alarm recording e Remote surveillance using PCs AUDIO OUT Microphone Speaker with built in amplifier AUDIO IN ii 1 O m ALARM IN OUT Mic Amp ALARM IN ALARM OUT Supplied power cable VGA OUT USB Mouse Ana VGA monitor
19. Ger t die einzige Einheit die in dem Rack einzubauen ist so sollte es auf dem Rack Boden angebracht werden Wird das Rack teilweise genutzt bauen Sie die Teile von unten nach oben ein Die schwerste Komponente sollte stets unten im Rack eingebaut werden Ist das Rack mit stabilisierendem Zubeh r ausgestattet montieren Sie zun chst diese Stabilisatoren bevor Sie das Ger t in das Rack einbauen oder warten Achtung Vor dem Einbau in das Rack ist sicherzustellen dass das Rack sicher und vor dem Umfallen gesch tzt ist Technische Daten Allgemein Zul ssiger Temperaturbereich bei der Lagerung 20 C bis 60 C Stromaufnahme 2 u n elle AE o 0 8 A max GEMIEN 3 Reg etwa 7 8 kg VIII Getting Started Features Automatic detection of network cameras Reduces the hassle of complex camera registration procedures Built in large capacity hard disk 500 GB HDD expansion supported Addition of up to 500 GB built in 2 TB x 2 units external RAID1 supported Supports RAID1 if additional built in HDD is installed Writing the same data to two separate hard disks mirroring to enable normal use if one of the hard disks breaks down Simultaneous recording up to 16 channels at 160 ips Simultaneous recording up to 16 channels at 240 ips is possible when the NVR Viewer is not started up In addition purchasing additional camera licenses enables the VR N1600U E A to handle simu
20. IVE BROWSE button when the wallpaper 1 or main menu 2 screen is displayed e Press the LIVE BROWSE button when the Browse screen is displayed e Press the button to toggle between the Live and Browse screens oor Operation 1 Up l Down Enter Ent 1 Wallpaper Screen 2 Main Menu Screen Select a View For details on the view settings refer to INSTRUCRTIONS Press the PTZ PRESET button to switch the PTZ PRESET indicator to the blinking mode e Press the PTZ PRESET button to switch the PTZ PRESET indicator between the lit and blinking modes 2 Press the 15 ZOOM IN and 14 ZOOM OUT buttons to select a view 16 Note e Do not switch the view frequently within a short time interval e When live images do not appear on VN C625 VN C655 set the password on the camera unit as well as VR N1600U E again For details on the setting procedures refer to the INSTRUCRTIONS of the camera in use and procedures for setting the root password on the Edit device settings screen in this manual e The audio setting is set to No Audio Sources when you return from the setting screen to Live Select the audio parameters again Select a Camera Select the camera image that you want to view as follows I Press the SELECT button e The SELECT indicator lights up 2 Enter the camera number using the 1 to 16 keypad e When you have selected a camera the blue bar at the top of each live
21. N VORZUBEUGEN DARF Richtlinien und Normen bez glich DIESES GER T WEDER DEM REGEN NOCH HOHER elektromagnetischer Vertr glichkeit und elektrischer FEUCHTIGKEIT AUSGESETZT WERDEN Sicherheit berein Die europ ische Vertretung f r die Victor Company of ACHTUNG Japan Limited ist Um elektrische Schl ge zu vermeiden das Geh use nie JVC Technology Centre Europe GmbH ffnen Im Innern befinden sich keine Teile die vom Postfach 10 05 52 Benutzer gewartet werden k nnen berlassen Sie die 61145 Friedberg Wartung qualifiziertem Service Personal Deutschland Benutzerinformationen zur Entsorgung alter Ger te Hinweis Dieses Symbol ist nur in der Europ ischen Union g ltig Europ ische Union Dieses Symbol zeigt an dass das elektrische bzw elektronische Ger t nicht als normaler Haushaltsabfall entsorgt werden soll Stattdessen sollte das Produkt zur fachgerechten Entsorgung Weiterverwendung und Wiederverwertung in bereinstimmung mit der Landesgesetzgebung einer entsprechenden Sammelstelle f r das Recycling elektrischer und elektronischer Ger te zugef hrt werden Die korrekte Entsorgung dieses Produkts dient dem Umweltschutz und verhindert m gliche Sch den f r die Umwelt und die menschliche Gesundheit welche durch unsachgem e Behandlung des Produkts auftreten k nnen Weitere Informationen zu Sammelstellen und dem Recycling dieses Produkts erhalten Sie bei Ihrer Gemeindeverwaltung Ihrem rtlichen Entsorg
22. Names and Functions continued Rear Panel 4 Cesena POWER switch Switches the power on or off Memo e Be sure to press and hold down the OPERATE button on the front panel to shut down the system before switching off the power supply AC IN power input terminal Connect to an AC outlet using the power cable supplied AUDIO IN 1 AUDIO IN 2 audio input terminals 1 2 RCA Connect to the audio output terminal of the device from which audio signals are to be recorded AUDIO OUT audio output terminal RCA Outputs live sound in the live viewing mode Outputs recorded sound in the playback mode Memo e There is no audio output when playing back still images when running searches other than x1 or when playing back frame by frame VGA OUT VGA output terminal Outputs live images recorded images and the menu screens LAN1 LAN1 connection terminal camera network For connecting to the IP camera sold separately network using a LAN cable Color Status Left Off Communication at 10 Mbit Indicator second Green On Communication at 100 Mbit second Orange On Communication at 1 Gbit second Right Off Not connecting to the network Indicator Yellow Blinking Communication is in progress 8 SERI
23. OWN must be connected to the terminal which is marked with the letter L or coloured RED POWER SYSTEM Connection to the mains supply This unit operates on voltage of 220 V to 240 V AC 50 Hz 60 Hz WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION To prevent electric shock do not open the cabinet No user serviceable parts inside Refer servicing to qualified service personnel Note The rating plate and the safety caution are on the rear and top of the unit Caution for AC Power Cord FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY Appropriate AC Power Cord must be used in each local area FOR CONTINENTAL EUROPE ETC Not to be used in the U K FOR U K ONLY If the plug supplied is not suitable for your socket outlet it should be cut off and appropriate one fitted WARNING It should be noted that it may be unlawful to re record pre recorded tapes records or discs without the consent of the owner of copyright in the sound or video recording broadcast or cable programme and in any literary dramatic musical or artistic work embodied therein WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures CAUTION
24. P Button H S Press to move the item selection in the reverse direction in the menu or settings screen Jumps to the beginning of the previous sequence on the selected camera when you press this button in the playback mode Press and hold it to jump to the first image in the database of the selected camera E 7 Press to move the item selection in the forward direction in the menu or settings screen Jumps to the beginning of the next sequence on the selected camera when you press this button in the playback mode Press and hold it to jump to the last image in the database of the selected camera Memo Sequence indicates a certain block of images that are recorded during motion detection e Recorded images are stored in the database Database refers to data recorded in this unit Jog dial Plays back a single frame when it is rotated in the playback mode Shuttle dial The position of the dial specifies the playback speed and playback direction when in the playback mode Playback speed is selectable from x 1 20 x 1 5 x 1 x 2 x 5 x 10 and x 20 according to the angle REC Indicator Lights up during recording Flashes during EMERGENCY or EXT REC IN recording Center panel Do not remove the cover D Keypad buttons Indicator 0 to 16 Login screen e For entry of passwords numeric characters Enter number using 1 to 10 0 buttons 0 is input when 10 0 button is pressed
25. R N1600U E A When playing back the recorded images of VR N1600U E A set the total display rate to 80 ips or below to display the playback from the main unit and distribution for 13 channels or more simultaneously Press the SKIP to select the Device Manager e The device at the top of the list is selected 2 Camera Recording Admini De 3 Wem FR we 192 168 0 20 E gA WR 127 0 0 1 Use the 7 gt button to display the camera 25 Camera Recording Administrator E59 WR 127 0 0 1 Yo Setup Event Buttons Device Manager HBR eons 207w 192 168 0 5 E SA AKIS 212 PTZ 192 168 0 2 Ce roO Scheer 4 General Settings Service Manager Add Device Archive Setup Settings YO Control Use the SKIP button to select Settings followed by pressing the 16 ENTER button e The Camera Settings screen appears Speedup Settings I 0 13Secord s btw images Recording Settings 0 13 Seconds btw images 1 Enable speedup E F When to store images in database always 7 Onmetion Never I onevent Cendkionall 3 seconds prejpost recerdings on mationjevent 106000 IN case of database Flue the folowing actionshould betaken che moreran Exclude Resiors Settings Region Calor Outputs
26. S FAN STOP 20 Fan abnormality Check to ensure that the fan is running If the fan is not moving stop using it Otherwise it may break down Consult your nearest JVC dealer Specifications E General Allowable Operating Temperature 5 C to 40 C Allowable Storage Temperature 20 C to 60 C Allowable Operating Humidity 30 to 80 Power Supply VR N1600U AC 120 V 50 Hz 60 Hz VR N1600E AC 220 V to 240 V 50 Hz 60 Hz Consumption Current VR N1600U 1 2 A max VR N1600E 0 8 A max Mass Approx 7 8 kg H Interface Network RJ 45 x2 LAN1 1000BASE T 100BASE TX 10BASE T LAN2 1000BASE T 100BASE TX 10BASE T Serial USB2 0 A type or equivalent x 5 VGA Output Max 1600 x 1200 Audio Input Analog audio RCA x 2 8 dBs 50 kQ unbalanced Audio Output Analog audio RCA x 1 8 dBs 600 Q unbalanced O Terminals Push terminal Input x 12 Output x 5 GND x 3 E Compression Format Video JPEG MPEG 4 Audio U law 64 kbps A D 8 bits Fs 8 kHz E Recording HDD Capacity 500GB x 1 E Recording Display Distribution capacity for JPEG VGA 24 KB When viewing live images on NVR Up to 160 ips 80 ips 80 ips VR N1600U E Up to 160 ips 160 ips 160 ips VR N1600U E A When not viewing live images on NVR Up to 240 ips O ips 80 ips VR N1600U E Up to 240 ips O ips 160 ips VR N1600U E A When NVR Viewer is not started up When using NAS When viewing live ima
27. a supports the PTZ functions you can use the keypad and the 16 ENTER and 13 CANCEL buttons to move the camera up down tilt left right pan or enlarge reduce the image zoom LIVE BROWSE Button SELECT Button Keypad N er CLEAR Button u 15 ZOOM IN Button 14 ZOOM OUT Button PTZ PRESET Button REC CONTROL Button E Pan Tilt Press the PTZ PRESET button to switch the keypad to the PTZ mode e The PTZ PRESET indicator lights up e Press the button to switch between the PTZ Mode indicator lights up and Preset Mode indicator blinking 2 Press the 1 to 9 keypad e Pans Tilts in the direction indicated by the arrow on the keys e Press the 6 HOME key to move to the home position E Zoom In Zoom Out Press the PTZ PRESET button to switch the keypad to the PTZ mode e The PTZ PRESET indicator lights up e Press the button to switch between the PTZ Mode indicator lights up and Preset Mode indicator blinking 2 Press the 15 ZOOM IN or 14 ZOOM OUT button E Using Preset Positions 1 Press the PTZ PRESET button to switch the keypad to the Preset mode e The PTZ PRESET indicator starts blinking e Press the button to switch between the PTZ Mode indicator lights up and Preset Mode indicator blinking 2 Enter the preset number using the 1 to 10 0 keypad e The ca
28. abel ab Schalten Sie den Recorder vor dem Transport aus und stellen Sie sicher dass der Netzstecker aus der Steckdose entfernt wurde Wird dies nicht beachtet kann dies zu Besch digungen am Kabel einem Brand oder einem Stromschlag f hren EM Transportieren oder starten Sie die Installation des Recorders nicht solange er noch eingeschaltet ist oder unmittelbar nachdem er ausgeschalten wurde ungef hr eine Minute E Achten Sie bei der Verpackung darauf dass der Recorder vor St6Ren gesch tzt ist E Gehen Sie vorsichtig mit dem Recorder um Setzen Sie ihn keinesfalls Ersch tterungen oder St en aus Vil Netzkabel E Verwenden Sie das mit dem Recorder gelieferte Netzkabel ausschlie lich f r dieses Ger t E Stellen Sie keine schweren Gegenst nde auf das Netzkabel und vermeiden Sie dass das Netzkabel unter dem Recorder eingeklemmt wird Wird dies nicht beachtet kann dies zu Besch digungen am Kabel einem Brand oder einem Stromschlag f hren E Benutzen Sie grunds tzlich das mit dem Recorder gelieferte Netzkabel Die Verwendung eines anderen oder besch digten Kabels kann zu Stromschl gen und Br nden f hren E Stecken Sie das Netzkabel nicht w hrend der Aufnahme Wiedergabe oder w hrend eines Zugriffs auf das Laufwerk aus Hinterer Geh usedeckel Achtung S mtliche Audio Video und LAN Verbinder d rfen nicht direkt an ein Kabelverteilungssystem Au enbereiche oder zwischen Geb uden angeschlossen werden Hintere
29. ary according to the environment of use For inquiries on maintenance plans and expenses consult your nearest JVC dealer listed on the separate sheet When installing an external hard disk we recommend the use of UPS uninterruptible power supply to ensure the stable operation of the system Power failure that occurs during formatting or disconnection of the HDD may affect its subsequent use even when the UPS is connected JVC shall not be held responsible for the compensation of losses incurred in the event that recording or playback fails due to defects in this unit or its hard disk drive e Images recorded on the HDD will be deleted when you replace it with a new disk Note also that recorded images may be deleted when you upgrade the software for this unit Precautions when Moving this Unit Remove all connected cords before moving Turn off the power and remove the power plug before moving this unit Failure to do so may cause damage on the cords and result in fire or electric shock Moving of this unit or installation work is strictly prohibited when the power of this unit is on or immediately after the power is turned off approximately 1 minute The HDD continues to move under its own inertia for some time after the power is disconnected and exertion of vibration or impact during this interval may result in HDD failure When moving this unit wrap it using cushioning materials to protect it from external sho
30. b in a wet basement or near a swimming pool etc Do not place this appliance on an unstable cart stand or table The appliance may PORTABLE CART WARNING fall causing serious injury to a child or adult and serious damage to the appliance symbol provided by RETAC Use only with a cart or stand recommended by the manufacturer or sold with the appliance Wall or shelf mounting should follow the manufacturer s instructions and should use a mounting kit approved by the manufacturer e An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn Slots and openings in the cabinet and the back or bottom are provided for ventilation and A to insure reliable operation of the appliance and to protect it from overheating these er openings must not be blocked or covered The openings should never be blocked by placing the appliance on a bed sofa rug or other similar surface This appliance should never be placed near or over a radiator or heat register This appliance should not be placed in a built in installation such as a bookcase unless proper ventilation is provided This appliance should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your dealer or local power company For appliance designed to operate from battery power re
31. cedures for setting the root password on the Edit device settings screen in this manual e The setting in the Audio section is set to No Audio Sources when you return from the setting screen to Browse Select the audio parameters again Searching Recorded Image Using a Specific Date Time You can search for and play back images by specifying a date and time using the SEARCH button on the front panel Press the SEARCH button on the Browse screen e The date and time input screen appears year month day Date 7 07 05 hour minute second we Go To Button Time 08 56 2 Use the keypad to enter the search date and time e Use the SKIP button S or T to select an item and input accordingly 3 Press the 16 ENTER button The view in the image display screen on the right jumps to the selected date and time Memo e You can also jump to the selected date time by clicking the Go To button e When you are using the software keyboard click the Go To button Playing Skipping and Stopping Recorded Images Control using the PLAY SKIP and Stop buttons E Control using the PLAY SKIP and PLAY buttons on the front panel LIVE BROWSE Button Indicator Keypad Indicator STOP PB Button 17 900 GOO SEARCH Button 16 ENTER Button 13 CANCEL Button PTZ PRESET Button Indicator
32. ck Handle this unit carefully without exerting vibration or impact on it Precautions for Handling Power Cords Do not use the supplied cords on devices other than this unit Do not place heavy objects on the power cord or place it under this unit Doing so may cause damage on the cords and result in fire or electric shock Do not use cords other than those supplied with this unit Use only power cords supplied together with this unit Using cords with different withstanding voltage specifications or damaged cords may result in fire or electric shock Do not remove the power plug during recording or playback or when the HDD is being accessed Maintenance Turn off the power before performing maintenance of this unit Wipe this unit using a soft cloth Wiping using thinner or benzene may cause the surface to melt or fog When the surface is extremely dirty wipe using a cloth that is dipped into a neutral detergent diluted with water followed by wiping with a dry cloth Energy Conservation Turn off the power of the system for safety reasons and to save energy if this unit is not to be used for a long time Copyright Use of video or audio sound recorded using this unit for commercial purposes or playing them for public viewing or listening may be an infringement of the copyrights of their respective authors under the copyright law These video audio recordings shall only be restricted to personal use
33. ck to ensure that an audio source is selected in Audio Operation of the unit is disabled Press and hold the FUNCTION button on the front panel and press the OPERATE button for 7 seconds or longer to shut down the power forcibly When the power is forcibly shut down recorded images that are not archived may not be properly played back The following message appears after the power is turned on COMS Settings Wrong CMOS Date Time Not Press F1 to Run SETUP Press F2 to load default values and continue E Actions when Warning Indicator Lights Up Error Message The built in backup battery is low Consult your nearest JVC dealer Action to Take Free space of HDD less than GB drive If this message is displayed for the D drive try to recover using HDD Utility If the above does not solve the problem consult your nearest JVC dealer WARNING HDD Disk The HDD seems is no longer serviceable Replacement is recommended Consult your nearest JVC dealer HDD was removed Check to ensure that the power of the external HDD is switched on Check to ensure that the connecting cable is properly inserted If no abnormality is found above consult your nearest JVC dealer WARNING HDD Raid This is a hard disk when RAID is enabled warning Consult your nearest JVC dealer WARNING HDD xxx Disconnect The NAS drive is disconnected Check the operation of NAS Check the connection with NA
34. den Vi SICHERHEITSVORKEHRUNGEN for Germany ACHTUNG 1 Nehmen Sie nicht die Frontabdeckung ab 2 Falls sich die Frontabdeckung l sen sollte setzen Sie sie sofort wieder auf Lager und Verwendungsort E Vermeiden Sie den Rekorder an folgenden Pl tzen zu lagern oder zu verwenden Eine Missachtung kann zu einem Fehler oder einer St rung f hren Extrem hei e oder kalte Pl tze die au erhalb der zul ssigen Betriebstemperatur liegen 5 C 40 C e Feuchte oder trockene Pl tze die au erhalb der zul ssigen Feuchtigkeit f r den Betrieb liegen 30 80 Pl tze an denen starke Magnetfelder erzeugt werden beispielsweise Tranformatoren oder Motoren Pl tze in der N he von Ger ten die elektrische Wellen erzeugen beispielsweise Sender Empf nger oder Handys e Staubige oder sandige Pl tze Pl tze die starken Ersch tterungen ausgesetzt sind Pl tze die zu Kondensationsbildung neigen beispielsweise ein Fenster Pl tze die Strahlung R ntgenstrahlen oder tzende Gase erzeugen Handhabung des Recorders E Stapeln Sie Recorder nicht aufeinander Dies kann zu erh hter Ger uschentwicklung und aufgrund von berhitzung zu Fehlfunktionen oder zum Totalausfall der Ger te bis hin zu Br nden f hren m Blockieren Sie nicht die Bel ftungsschlitze Sind die ffnungen blockiert bildet sich im Inneren des Recorders Hitze wodurch ein Brand entstehen kann Benutzen Sie den Recorder nicht in vertikaler Po
35. dicator lights up when the camera selection mode is set to on PTZ PRESET Button Indicator Switches between the PTZ mode and PRESET mode of the key The mode changes each time the button is pressed The indicator lights up when PTZ mode is selected and blinks when PRESET mode is selected SERIAL Terminal For connecting the communication control terminals on a mouse sold separately flash memory sold separately or UPS sold separately Memo e Use the SERIAL1 to 4 port on the rear panel for additional hard disk drive connection Page 8 Note e Attach the serial port cover supplied when the port is not in use Static electricity may cause the unit to malfunction Remove any static electricity before starting operation Status indicators WARNING Indicator Lights up when an error occurs Page 20 Press and hold the ALARM CLEAR button to turn off the light 6 bebe WE ALARM Indicator Lights up when an alarm is activated Goes off when the ALARM CLEAR button is pressed Wi HDD Indicator Lights up when the built in hard disk drive is accessed E LOCK Indicator Lights up when operation is locked FUNCTION Button Press the following buttons while holding down the FUNCTION button to use the following features FUNCTION Press and hold to forcibly shut down OPERATE the system FUNCTION REC Displays the main menu CONTROL FUNCTION
36. een appears Check to ensure that Auto Detect is selected followed by pressing the 16 ENTER button e The Please wait message appears Memo e The characters of the selected item switches to orange color IP Lease IP Infomation Enble Disable P MAC CH MAKER MODEL ODelete IP Infomation 2 OUp IP Lease Parameter Start Address 192 168 0 100 ODown Unit 20Units x SubnetMask 255 255 255 0 Gateway 192 168 0 254 DNS Server Primary 192 168 0 23 lt gt Secondry 192 168 0 282 OEntry Domain Name een Reserve MAG Address ease Time Limit ae ON OYes 48hours v P Only Camera Any Client OAdd ODel ok Cancel 2 Check to ensure that the camera is detected e After the message disappears a list of detected cameras is displayed e If all the cameras are not detected press the Auto Detect button again If doing so does not solve the problem check the connection with the cameras and the IP address of the cameras IP Lease IP Infomation Oknbe ODisabe P MAC CH MAKER MODEL gt E 19216802 004080815764 1 AXIS 212PTZ gt ODelete IP Infomation 192168020 008088421403 1 WG Ou lak FEN E 19216805 00408c7a8c0e 1 AXIS 20W E Start Address 192 168 0 100 ODow Unit 20Units v BEETS 255 255 255 0 Qatay 192 168 0 254 DNS Server Primary 192 168 0 263 lt gt Secondry 192 168 0 262 OEntry Domain Name Reserve MAC Address MAG Oh Yes 48Hours P Client Only Camera O An
37. esult in fire or electric shock Precautions for Handling Hard Disk Drive The distance between the head and the disk is only about 0 02 um when the hard disk henceforth HDD is reading the data Vibration or impact that is exerted on the HDD may therefore cause the head to hit against the disk hence causing the disk surface to dent or the disk to chip When this occurs data may not be properly read or ina worse scenario continued use in this condition may result 4 in head crash damage Careful attention must therefore be paid when handling it Precautions During Installation and Change of Installation Location Moving of this unit or installation work is strictly prohibited when the power of this unit is on or immediately after the power is turned off approximately 1 minute The HDD continues to move under its own inertia for some time after the power is disconnected and exertion of vibration or impact during this interval may result in HDD failure When moving this unit wrap it using cushioning materials to protect it from external shock Handling Precautions e Handle this unit carefully without exerting vibration or impact on it e Do not remove the power plug during recording or playback or when the HDD is being accessed e The HDD is a consumable product Perform maintenance after it has been used for about 18 000 hours This value is based on its use in an environment with a temperature of 25 C and may v
38. fer to the operating instructions This appliance system is equipped with a 3 wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding plug For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Do not allow anything to rest on the power cord Do not locate this appliance where the cord will be abused by persons walking on it Follow all warnings and instructions marked on the appliance Do not overload wall outlets and extension cords as this can result in fire or electric shock Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the appliance Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel Unplug this appliance from the wall outlet and refer servicing to qualified
39. ges on NVR Up to 80 ips 80 ips 80 ips VR N1600U E Up to 80 ips 160 ips 160 ips VR N1600U E A When not viewing live images on NVR Up to 80 ips O ips 80 ips VR N1600U E Up to 80 ips O ips 160 ips VR N1600U E A E Attachments Accessories VR N1600U Power Cord 2 m cesceeseeseseeeeeeeeees Rack Mount Bracket seen Warranty Card 222ernsennensnnennnennnenn nn Service Information Card Screw M4 x 10 mm Screw M5 x 11 mm VR N1600E Power Cord 2 m sesnennnnneen Rack Mount Bracket 2u ee Screw M4 x 10 mm Screw M5 x 11 mm E Dimensional Outline Drawing Unit mm x The specifications and appearance of this unit may be modified for improvement without prior notice 21 22 23 2009 Victor Company of Japan Limited A0091LN YA NOO9LN YA 4JA40OI34 OACIA MHOMLAN LST0601 001B
40. image changes to a lighter blue tone e Each bar comes with a tri color square indicator which indicates the following features as well as characters that indicate the operating status of the camera Live Screen Memo Event indicator Left yellow Lights up when events specified in the Camera Record Setting occur The indicator appears black if event indication has not been specified for the camera in question or if no specified event has occurred Motion indicator Center red Lights up when motion is detected Online indicator Right green Blinks every time an image is received from the camera Operating status of the camera Appears to the left of the indicator Display Status Live Green When live images are displayed without being recorded Recording Red When recording is in progress Stop Yellow When images are not acquired from the camera or when the camera is in the offline mode e You can press the ALARM CLEAR button to hide the event indicator and motion indicator The image bar displays the name of the camera as well as the name of the device to which the camera is connected e Pressing a number that corresponds to the selected camera enlarges the display To restore display to the normal size press the number of the camera with enlarged display Operating the Camera PTZ stands for pan tilt and zoom If the camer
41. irst then switch the camera on after confirming that the Auto Detect Setting window is displayed e Refer to the user manual supplied with the camera for instructions on how to specify the IP camera settings e By default Time Zone is set to GMT 05 00 Eastern Time VR N1600U GMT Greenwich Mean Time VR N1600E and Auto Summertime Adjustment is checked Specify a Time zone according to the region used Refer to the INSTRUCTIONS on how to specify a Time zone settings Keypad uhr amp oo O 16 ENTER KEY Button SKIP Button Button Start up VR N1600U E 1 Turn on the power switch at the rear panel e VR N1600U E starts up Selecting a Language The Language Setting screen appears when you start up VR N1600U E for the first time Select the language to use using the steps below Language Selection English OK 1 Select a language e Use the 2 or 10 0 button to select a language 2 Use the SKIP button to select OK followed by pressing the 16 ENTER button e The The system is being set up message may appear depending on the setting and the system is automatically rebooted Memo e Selecting OK changes the color of the OK characters from brown to orange Automatic Registration of Cameras After you have started up VR N1600U E for the first time and finished selecting a language the Auto Detect scr
42. l triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE This unit should be used with 120 V AC only CAUTION To prevent electric shocks and fire hazards DO NOT use any other power source RISQUE D ELECTROCU TION NE PAS OUVRIR ATTENTION POUR EVITER TOUT RISQUE D ELECTROCUTION NE PAS OUVRIR LE BOITER AUCUNE PIECE INTERIEURE N EST A REGLER PAR L UTILISATEUR SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME Le symbole de l Eclair a l interieur d un triang quilat ral est destin a alerter utilisateur sur pr sence d une tension dangereuse non isol e dans le boitier du produit Cette tension e suffisante pour provoquer personnes Le point d exclamation a l interieur d un triang quilat ral est destin a alerter l utilisateur sur pr sence d op rations d entretien importantes au sujet desquelles des renseignements se trouve dans le manuel d instructions Ces symboles ne sont utilis s qu aux Eta
43. ltaneous recording up to 32 channels For details please consult your nearest JVC dealer Display Distribution performance at 80 ips VR N1600U E and 160 ips VR N1600U E A Enables simultaneous recording and playback Playback of recorded images jog dial playback and skip playback are possible while recording is in progress Direct Search Enables you to retrieve data of a specific date time or alarm position speedily Power failure recovery record If a power failure occurs during recording the system resumes recording in the mode selected before the power failure after recovery Alarm recording Enables recording to start automatically in the alarm recording mode when alarm signal input is received during recording 2 Motion Detect Enables recording to start automatically when motion is detected in the preset live image You can also specify the detection area for each camera Alarm Mail Notification Enables notification by e mails to be sent out when an alarm or motion is detected How to Read this Manual E VR N1600U E Documents There are two documents on this unit 1 Startup Guide This is a booklet that is supplied together with VR N1600U E It is also available in the PDF file format You can find it in the CD ROM provided 2 Instruction Manual PDF This manual is available in the PDF file format You can find it in the CD ROM provided E Symbols Used in this Manual Note Preca
44. mera moves to the preset position Memo e You can specify numbers from 10 to 19 by pressing 10 0 followed by a number from 10 0 to 9 Note e You need to specify the preset positions in advance in order to use the preset feature 17 Basic Operation Playing Back Recorded Images via Front Panel Control This section describes the procedures for playing back recorded images using the front panel of VR N1600U E Displaying the Browse Screen Press the LIVE BROWSE button when the wallpaper or main menu screen is displayed e The NVR Viewer starts up and the Live screen appears 2 When the Live screen appears press the LIVE BROWSE button again e Press the button to toggle between the Live and Browse screens Select Event Presets a ME Live Screen Select a View For details on the view settings refer to _NSTRUCRTIONS Press the PTZ PRESET button until the PTZ PRESET indicator blinks e The PTZ PRESET indicator switches between lit and blinking each time the PTZ PRESET button is pressed 2 Press the 15 ZOOM IN or 14 ZOOM OUT button to select a view 18 Note e Do not switch the view frequently within a short time interval e When live images do not appear on VN C625 VN C655 set the password on the camera unit as well as VR N1600U E again For details on the setting procedures refer to the INSTRUCRTIONS of the camera in use and pro
45. ms aus der Steckdose bevor Sie das Ger t reinigen Benutzen Sie keine Fl ssigreiniger und keine Spr hreiniger Verwenden Sie zum Reinigen lediglich ein leicht angefeuchtetes Tuch Benutzen Sie keine Zubeh rteile die nicht vom Hersteller empfohlenen werden diese k nnen Gefahren und Risiken verursachen Benutzen Sie das Ger t nicht in der N he von Wasser und sonstigen Fl ssigkeiten beispielsweise nicht in der N he von Badewannen Handwaschbecken Sp len Waschbecken nicht in feuchten Kellern nicht in der N he von Schwimmbecken und so weiter Stellen Sie das Ger t nicht auf instabile Wagen St nder oder Tische Das Ger t kann herunterfallen ernsthafte Verletzungen bei Kindern und Erwachsenen hervorrufen und auch selbst schwer besch digt werden Benutzen Sie ausschlie lich Wagen oder St nder die vom Hersteller empfohlen oder mit dem Ger t verkauft wurden Bei der Aufstellung im Regal halten Sie sich an die Anweisungen des Herstellers Zus tzlich sollten Sie einen vom Hersteller zugelassenen Montagesatz verwenden Eine Kombination aus Ger t und Wagen sollte grunds tzlich mit gro er Sorgfalt bewegt werden Schnelle Stopps berm iger Krafteinsatz und unebener Untergrund k nnen zum Umkippen der Ger t Wagen Kombination f hren Schlitze und ffnungen im Geh use sowie an R ckwand und Unterseite dienen der Bel ftung des Ger tes und sorgen daf r dass das Ger t zuverl ssig arbeiten und sich nicht berhitzen kann Daher d
46. nals 1 to 8 Alarm recording is activated when signals are input to these terminals D EMERGENCY emergency input terminal Recording is activated in all cameras when a signal is input to this terminal 33 ALARM RESET alarm reset input terminal Output from the alarm output terminal is stopped when a signal is input during output of the Alarm Out signals Turns off the ALARM indicator on the main unit Press and hold the button to turn off the WARNING indicator on the main unit D EXT REC IN external recording input terminal Recording in all cameras is started or stopped by an external signal Recording will not be started in cameras to which no video signal is being input D OPE ON OFF Operate ON OFF terminal Switches between OPERATE ON or OFF when a signal is input E Output ports ED COMMON signal ground terminal This is a common ground terminal Connect it to the signal ground terminal on the connected device This can be used when there are insufficient common ground terminals D ALARM OUT alarm output terminal Outputs a signal when recording is started by an alarm D WARNING OUT warning output terminal Outputs a signal when an error such as operation abnormality occurs on the hard disk D REC TALLY recording status output terminal Outputs the recording status of this unit OPTION OUT1 OPTION OUT2 OPT OUT output terminals 1 2 Outputs a signal when an event is detected
47. s e Places where water droplets may be formed such as window sides e Places with considerable vapor and oil such as kitchens e Places that emit radiation X rays and corrosive gases Using this unit and the cable that is connected to it near places where strong radio waves or magnetic fields such as near radios TVs transformers and monitors are emitted may cause noises in the video images or color changes Handling Precautions Do not stack the devices on one another during use Heat and noise from the devices may cause the unit to malfunction or break down and lead to fire Do not block the ventilation holes Doing so may cause heat to trap inside the unit and result in fire Do not use this unit by laying it down sideways upside down or at an angle Do not place objects on this unit Placing heavy objects such as TV monitors or objects that are bigger in size on this unit may cause it to lose balance and drop or fall hence resulting in injuries Do not stand or sit on this unit Doing so may cause this unit to fall or break down and result in injuries Keep it out of the reach of young children Do not place objects with water e g vases flower pots cups cosmetic products and chemicals on this unit Water may enter this unit and result in fire or electric shock Do not insert objects into this unit Metallic or other flammable objects that enter this unit from the ventilation holes may r
48. s and their use without prior consent of the copyright holder is strictly prohibited under the copyright law Others When there is variation in the supply voltage such as during lightning operation of this unit may be disabled to protect the system until the supply voltage stabilizes again Eliminate static electricity before performing work that requires you to touch the input output terminals such as when installing devices Do not touch the rear panel of this unit when it is running as static electricity may cause it to malfunction When there is a large number of data recorded on this unit such as short alarm records a longer time may be required during search or backup This is not a malfunction Data recorded from TV broadcasts or video audio recordings shall only be restricted to personal uses and their use without the prior consent of the copyright holder is strictly prohibited under the copyright law The width of the border lines black in color of images on the split screen varies according to the type of input signals This is due to the characteristics of the camera s input signals and is not a malfunction The condition may also be improved by adjusting this unit For details consult your nearest JVC dealer This unit comes with a high precision hard disk device Be careful not to exert vibration or impact on this unit when handling it Exertion of vibration or impact particularly when the po
49. sition nicht auf dem Kopf stehend nicht mit der Front nach oben E Legen Sie keine Gegenst nde auf dem Recorder ab Wenn Sie einen schweren Gegenstand beispielsweise einen Fernsehbildschirm oder einen gro en Gegenstand der ber die Kante des Recorders hinausragt auf den Recorder stellen kann dieser aus dem Gleichgewicht geraten Dadurch besteht die Gefahr dass der Recorder kippt oder auf den Boden f llt und Verletzungen verursacht E Steigen Sie nicht auf den Recorder Der Recorder k nnte umfallen oder besch digt werden Achten Sie besonders auf kleine Kinder E Stellen Sie keine wasserhaltigen Gegenst nde auf dem Recorder ab beispielsweise Vase Blumentopf Gl ser Kosmetika oder Chemikalien Tritt Wasser in das Innere des Recorders ein kann dies einen Brand oder einen Kurzschluss verursachen E Stecken Sie keine Fremdk rper in den Recorder Dringen metallische oder brennbare Gegenst nde durch die Bel ftungsschlitze o in den Recorder ein kann dies einen Brand oder einen Kurzschluss verursachen Pflege des Recorders m Wischen Sie den Recorder mit einem weichen Tuch ab Verwenden Sie keine Verd nner oder Benzol Dies k nnte dazu f hren dass die Oberfl che zersetzt oder matt wird Im Fall von hartn ckigen Flecken wischen Sie diese zun chst mit einem neutralen und mit Wasser verd nnten Reiniger ab und wischen Sie die Fl che dann trocken Transport des Recorders E Trennen Sie vor dem Transport des Recorders alle K
50. tellen an denen Personen auf das Kabel treten und es besch digen k nnen Beachten Sie alle Warnungen und Anleitungen die auf dem Ger t vermerkt sind f hren Stecken Sie niemals Gegenst nde gleich welcher Art durch die Geh use ffnungen in das Ger t dabei k nnen Hochspannung f hrende Teile ber hrt und Kurzschl sse verursacht werden Es besteht akute Brand und Stromschlaggefahr Lassen Sie niemals Fl ssigkeiten gleich welcher Art auf oder in das Ger t gelangen Unter folgenden Bedingungen ziehen Sie den Netzstecker und lassen das Ger t von einem qualifizierten Techniker berpr fen und reparieren a Wenn das Netzkabel oder der Netzstecker besch digt ist auch kleinste Besch digungen k nnen gro e Auswirkungen haben b Falls Fl ssigkeit auf oder in das Ger t gelangt sein sollte c Wenn das Ger t mit Regen oder Wasser in Ber hrung gekommen ist d Wenn das Ger t nicht normal funktioniert obwohl die Betriebsanleitung befolgt wurde Passen Sie nur die Steuerungen an die in der Betriebsanleitung vermerkt sind Die Anpassung anderer Steuerungen kann ansonsten zu Sch den f hren die dann sehr aufw ndig von einem qualifizierten Techniker repariert werden m ssen damit das Ger t wieder einwandfrei funktioniert e Falls das Ger t fallen gelassen oder das Geh use besch digt wurde f Falls sich die Leistung des Ger tes sp rbar ndern sollte in diesem Fall muss das Ger t dringend berpr ft und oder repariert wer
51. this waste in accordance with national legislation Union Business users If you wish to dispose of this product please visit our web page www jvc europe com to obtain information about the take back of the product Other Countries outside the European Union If you wish to dispose of this product please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment Dear Customer This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety European representatives of Victor Company of Japan Limited is JVC Technology Centre Europe GmbH P O Box 10 05 52 61145 Friedberg Germany CAUTION 1 Please do not detach the front cover 2 Please put it when the front cover comes off SICHERHEITSVORKEHRUNGEN for Germany SPANNUNGSVERSORGUNG WARNUNG Anschluss am Netz Bei dem Ger t handelt es sich um ein Klasse A Produkt Die Betriebsspannung f r dieses Ger t betr gt In Haushaltsumgebungen kann ein solches Produkt AC 220 V bis 240 V 50 Hz 60 Hz Funkst rungen verursachen In einem solchen Fall muss der Benutzer geeignete Ma nahmen ergreifen ACHTUNG Sehr geehrter Kunde sehr geehrte Kundin UM DER GEFAHR VON BR NDEN UND dieses Ger t stimmt mit den g ltigen europ ischen ELEKTRISCHEN SCHL GE
52. tor account here 6 Enter the password for the network camera e Press the KEY button to display the software keyboard e Use the keypad to move the mouse cursor over the software keyboard e Pressing the 16 ENTER button inputs the characters on the keyboard into the password field 7 After password entry is complete press KEY again the close the software keyboard 8 Use the SKIP button to select OK followed by pressing 16 ENTER 9 Repeat the steps from 5 to 7 for every detected camera e The Camera Record Setting screen appears an Camera Recording Administrator Device Manager BR AXIS 207W 192 168 0 5 F R axis 212 PTZ 192 168 0 2 R WC 192 168 0 20 7 NVR 127 0 0 1 Add Device Service Manager Scheduler General Settings Archive Setup 1 0 Setup Matrix Event Buttons Generic Events YO Control 14 10 Set the display rate of each camera such that the total display rate of all cameras does not exceed 80 ips VR N1600U E or 160 ips VR N1600U E A e The default display rate is set at 8 ips The maximum display performance of 80 ips will be exceeded if 11 or more cameras are detected In this case you will need to adjust the display rate of each camera using the following steps VR N1600U E Note e The recording rate may drop if the total display rate of all cameras exceeds 80 ips VR N1600U E or 160 ips V
53. translation of NAT and NAPT etc or a router e If you connect LAN2 to the internet from a surveillance computer you will need to configure IP Masquerading e Communication between LAN1 and LAN2 is not possible Nor is it possible to configure a camera connected to LAN1 from the surveillance computer connected to LAN2 In order to configure a camera connected to LAN1 it is necessary to connect the computer for configuring cameras to LAN1 e LAN1 and LAN2 are incompatible with QoS Sound may not be played normally depending on the condition of the circuit e The default LAN1 IP address is 192 168 0 253 and the default LAN2 IP address is 192 168 1 253 To change the address use INSTRUCRTIONS e When a single network camera is registered with multiple units of VR N1600U E recording may not be properly completed in some cases Camera control e g PTZ control may also become unstable It is recommended that a single VR N1600U E be used for registering one IP camera as well as for controlling PTZ operations e Do not connect a broken hub router or deteriorated network cable etc Doing so may prevent the system from operating properly e Connection to a keyboard is not recommended 12 During Initial Startup Perform language setting and automatic camera registration when starting up VR N1600U E for the first time Before Starting Up e The DHCP setting is required for the IP camera beforehand Start up the VR N1600U E f
54. ts Unis le la st l electrocution de le la nt NOTE The rating plate serial number plate is on the rear of the unit AVERTISSEMENT POUR EVITER LES RISQUES D INCENDIE OU D ELECTROCUTION NE PAS EXPOSER L APPAREIL A L HUMIDITE OU A LA PLUIE Ce magn toscope ne doit tre utilis que sur du courant alternatif en 120 V ATTENTION Afin d viter tout resque d incendie ou d lectrocution ne pas utiliser d autres sources d alimentation lectrique INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CAUTION CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER S AUTHORITY TO OPERATE THE EQUIPMENT NOTE The rating plate serial number plate is on this unit WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANC
55. ungsunternehmen oder in dem Gesch ft in dem Sie das Produkt gekauft haben F r die nicht fachgerechte Entsorgung dieses Abfalls k nnen gem der Landesgesetzgebung Strafen ausgesprochen werden Gesch ftskunden Wenn Sie dieses Produkt entsorgen m chten besuchen Sie bitte unsere Webseite www jvc europe com um Informationen zur R cknahme des Produkts zu erhalten Andere L nder au erhalb der Europ ischen Union Wenn Sie dieses Produkt entsorgen m chten halten Sie sich dabei bitte an die entsprechenden Landesgesetze und andere Regelungen in Ihrem Land zur Behandlung elektrischer und elektronischer Ger te Erkl rung zum Rauschen f r die Bundesrepublik Deutschland Maschinenl rminformations Verordunung 3 GPSGV 06 01 2004 Der h chste Schalldruckpegel betr gt 70 dB A oder weniger gem EN ISO 7779 Hinweis zum Netzanschlu kabel Zu Ihrer Sicherheit lesen Sie bitte das folgende sorgf ltig Verwenden Sie ausschlie lich ein in Ihrem Land zul ssiges Netzkabel F r Kontinentaleuropa Nur f r Gro britannien Nicht f r den Gebrauch in Gro britannien WICHTIGE SICHERHEITSHINWEISE 1 2 10 berlasten Sie niemals Steckdosen oder Verl ngerungskabel Dies kann leicht zu Stromschl gen und Branden 12 13 Alle Warnungen auf dem Produkt sowie in der Betriebsanleitung sind unbedingt zu beachten Ziehen Sie den Netzstecker dieses Syste
56. utions to take during operation of this unit Memo Details for reference such as functions and restrictions on uses ie Page or item to refer to E Content of this Manual e The copyright of this manual belongs to JVC Reproduction or copy of this manual in part or in whole without the prior consent of JVC is strictly prohibited e Product names used in this manual are the trademarks or registered trademarks of the respective companies Symbols such as and are omitted in this manual e Milestone and XProtect Enterprise are the registered trademarks of Milestone Systems Inc e Designs specifications and other details used in this manual may be modified for improvement without prior notice This STARTUP GUIDE deals only with the initial setup and basic operational procedures on the VR N1600U E Besides the STARTUP GUIDE the VR N1600U E INSTRUCTIONS is also provided on a CD ROM that explains further details on the operation procedures For details please refer to the CD ROM Contents Getting Started IR STE 1O 1 ST SRRRRRPRRFBESTEFFEFERFREFEPEFIRFERFEPFERRBPRFFFFBFRERFFEFEFRTEIFFFFERSFBRTN 2 Contents u ni Air 3 Precautions for Proper Use of this Product 4 Part Names and Functions 22444440444 4 nnnnnnnn nn 6 Mounting to a R ck 2 er 10 Preparation System Connection Example uunsseesssersnnennennnnennnnnnnn 11 During Initial Startup oo
57. wer is on or when the hard disk is being accessed may cause this unit to break down When moving this unit do so about 1 minute after disconnecting the power supply Do not turn off the power switch at the rear of this unit or unplug the power cord during recording or playback or when the hard disk is being accessed Otherwise it may break down When this device is used as a general household there is a possibility of radio disturbance to the radio and television receiver etc Getting Started Part Names and Functions Front o oO OO OPERATE Button Indicator Switches operation on or off Press the button to turn operation ON and hold down the button to turn operation OFF The indicator blinks while the recorder is starting up or shutting down REC CONTROL Button Indicator Switches the recording control mode on or off The indicator lights up when the recording control mode is set to on Press and hold the FUNCTION button and press the REC CONTROL button at the same time to display the menu Memo ver The main menu cannot be displayed in the recording control mode or during recording The recording control mode performs recording in accordance with the settings in the Camera Record Setting menu SELECT Button Indicator Use the key to set to the camera selection mode The in
58. y Client OAdd ODel 0k Cancel e Devices other than the cameras may appear in the list Uncheck the boxes of these devices 3 Swap the order of detected cameras e Select SORT button using SKIP button and press 16 ENTER button The order of detected cameras can be sorted e The different types of sort buttons include the IP MAC CH MAKER and MODEL sort buttons e Select list using SKIP button to select 2 D 10 0 E After selecting camera press SKIP button to select Up Down When 16 ENTER is pressed the order of cameras will be swapped e Deselect the check box of any camera that you are not using Memo e The camera in the upper position of list order has the first priority Camera number will be registered in the list order 4 Use the SKIP button to select Entry followed by pressing the 16 ENTER button e The camera that is automatically detected is registered in the system 13 Preparation During Initial Startup continued 5 Use the SKIP button to select OK followed by pressing the 16 ENTER button e The Configure Device screen appears Detecting Device Found a JVC device on this address 192 168 0 20 Optional r This IP address does not hold a Camera Do not detect it in the Future Ido not know the password to this camera Redetect it the next time I start the Administrator Setup Enter the password for the video device administra
Download Pdf Manuals
Related Search