Johnson Hardware Series 2200F User's Manual
Contents
1. HARDWARE www johnsonhardware com INSTRUCTIONS Series 2200F SLIDING DOOR HARDWARE FOR 13 DOORS ONLY 50 Ibs ea One wheel hangers 75 lbs ea Two wheel hangers FINISHED OPENING WIDTHS FROM INSIDE TO INSIDE OF FINISHED DOOR JAMBS 2 DOOR MULTIPLY DOOR WIDTH BY 2 SUBTRACT 1 2155 OPT PULL 2135 GUIDE PULL 3 DOOR MULTIPLY DOOR WIDTH BY 3 SUBTRACT 2 2165 STOP PULL PULL 2135 2135 PULL 4 DOOR MULTIPLY DOOR WIDTH BY 4 SUBTRACT 2 2165 STOPS PULL 213 2135 PULL FOR 134 DOORS Cut track to precise length of door opening width Mount track as shown in diagram at right Fasten hangers on back side of doors 1 from each edge Drill doors for pulls 36 from bottom of door NOTE To obtain full adjustment possibilities avers must be located at TOP of each slot as shown in Fig Raise all hangers to top adjustment as shown in Fig 2 chen installing doors Wp MOUNT REAR DOOR FIRST py tilting door back and resting hangers on rear rail MOUNT FRONT DOOR same way by tilting back and placing hangers on front rail DOOR GUIDE is located by moving both doors to jamb on one side positioning guide between doors as shown and fastening to floor If floor is carpeted use Johnson 2136 CARPET RISER JAMB 2165 STOPS 4 DOOR SETS ACCESSORIES AVAILABLE NOT FURNISHED IN HARDWARE SET ims 2155 STOP Limits door travel 21362. CARPET RISER 35 PULL A firm base for door guide when carpeting is used through opening NOTE Use only All pulls on solid available in doors 7 finishes 30 PULL 24 Dia 40 PULL 1 Min 1 Max Headroom A Finished opening is door height plus 134 or if existing opening door height is 134 less than opening NOTE When 2136 Carpet Riser is used door must be 3 shorter 2135 GUIDE 2136 CARPET RISER CARPET ROOM SIDE ees o wa CARPET WHEN 2136 CARPET RISER IS USED DOORS MUST BE 54 SHORTER L E JOHNSON PRODUCTS INC 2100 STERLING AVE ELKHART IN 46516 USA 574 293 5664 IN2200FS Rev 9 05
Download Pdf Manuals
Related Search