Ingersoll-Rand FE595 User's Manual
Contents
1. SCHLAGE FE575 FE595 Door Preparation Instructions For Door With Existing Holes Tools Needed Drill Bits Needed We 1 1 i 2 Hole Saw Chisel r Pencil Measure Door Width If the door is thinner than 1 or thicker than 1 4 then the lock will not fit properly on the door 1 to 19 4 If Needed Enlarge Hole in Door If hole in door is smaller than 2 then use 2 hole saw to enlarge o p 2 2 Hole Saw 5 If Needed Enlarge Hole in Door Edge Measure for Backset If existing backset is not 2 or 294 then the lock will not fit properly on the door 2 or 234 If hole in door edge is smaller than 7 then use 7 or 1 drill bit to enlarge hole i lt OR lt a D e RN p 6 Check Strike Door Jamb Preparation a Place new strike against door jamb T K Measure Hole Sizes If hole sizes are larger than those shown then the lock will not fit properly on the door If hole sizes are smaller than those shown see steps 4 and 5 b If strike does not fit properly use pencil to trace around strike and mark hole positions c If needed use chisel and drill to correct door jamb preparation a d b Z o f f2. D F security amp Safety 2005 Ingersoll Rand Company Printed in U S A Rev 11 05
Download Pdf Manuals
Related Search