InFocus SP-CEIL-004 User's Manual
Contents
1. H One 1 safety screw So I One rotation plate unit attached J Two 2 tension screws eam am K Two 2 height adjustable screws 7 ns DNY By DY i L Single wood stud not included M Wall structure N One 1 suspension adapter Hardware item F is what secures the Digital Projector Mount to your Ceiling wall tabletop shelf or floor Make sure you consult with your local hardware store staff for the type of hardware that works best for your installation environment Fixed Height Ceiling Installation Complete the following steps to install the projector mount and projector on your ceiling This installation works best with low ceilings FIGURE 2 Note Look at the bottom of the swivel bracket G and locate the arrow Make sure you install the projector mount with the arrow pointing toward your screen 1 Secure the upper plate E to the ceiling D using the commercially available hardware F suitable for your environment Be sure that the swivel bracket G arrow is pointing toward your screen 2 Carefully raise the projector C with the mounting bracket B attached and insert it into the bottom of the swivel bracket G by its tabs 3 Rotate the projector C with the mounting bracket B attached 1802 so that the projector s focus ring is pointing toward your screen 4 Align the safety screw H on the swivel bracket G with the end of th2. 18 19 20 21 22 23 Use the Allen wrench to remove the upper plate E from the swivel bracket G Use the Allen wrench to remove the two screws from the enclosed end of the of the suspension adapter N and place it N into the slotted extension on the upper plate E Make sure that the two 2 outer holes on the suspension adapter N align with the holes on the slotted extension on the upper plate E Screw the two screws removed in step 2 into the two 2 holes to secure the suspension adapter N to the upper plate E Attach the swivel bracket G to the suspension adapter N and secure them with two screws removed in step 1 Secure the upper plate E to the wall M using the commercially available hardware F suitable for your environment Be sure that the swivel bracket G arrow is pointing toward your screen Carefully raise the projector C with the mounting bracket B attached and insert it into the bottom of the swivel bracket G by its tabs Rotate the projector C with the mounting bracket B attached 1802 so that the projector s focus rings is pointing toward your screen Align the safety screw H on the swivel bracket G with the end of the arrow shaped slot on the mounting bracket B and screw it through the opening to prevent further rotation Hand tighten the screw H Hand tighten the remaining two clamp screws J to secure the mounting bracket B to the swivel bracke
3. InFocus Cc O An p n A T Ia N 27700B S W Parkway Ave Wilsonville Oregon 97070 9215 1 800 294 6400 www infocus com SP CEIL 004 DIGITAL PROJ ECTOR MOUNT Installation Instructions These are the installation instructions for your Digital Projector Mount Included are four methods of installation Select the method that works best for your viewing situation The methods are Fixed Height Ceiling Installation best for short ceilings eight 8 or lower Adjustable Height Ceiling Installation best for high ceilings nine 9 feet or higher Wall Mount Installation for installing the Digital Projector Mount on a rear wall lf the required height range is greater than 12 the optional SP LTMT EXTP could be used to extend the length of the suspension adapter see N under Hardware Description on the next page For further information or ordering assistance please contact us at the phone number and address listed at the top of this column V Before You Start the Installation The wall or ceiling where you want to install the digital projector must be capable of supporting a weight that is five 5 times the weight of 6lbs the projector you are installing Consult the projector s documentation for weight specifications If the wall ceiling tabletop shelf or floor is not strong enough to handle five 5 times the weight of 6lbs then you must reinforce the installation environment If you are unsure about t
4. e arrow shaped slot on the mounting bracket B and screw it through the opening to prevent further rotation Hand tighten the screw H 5 Hand tighten the remaining two clamp screws J to secure the mounting bracket B to the swivel bracket G Check all of the hardware for proper tightness and security Do not over tighten the screws Figure 2 Ca ling ni D gt G M mnm wie _ aman N F i F asia B Mountng Bracket Projector C Adjustable Height Ceiling Installation Complete the following steps to install the projector mount and projector on your ceiling with the suspension adapter N This installation works best with high ceilings FIGURE 3 Note Look at the bottom of the swivel bracket G and locate the arrow Make sure you install the projector mount with the arrow pointing toward your screen 6 Use the Allen wrench to remove the upper plate E from the swivel bracket G 7 Use the Allen wrench to remove the two screws from the enclosed end of the of the suspension adapter N and place it N into the slotted extension on the upper plate E Make sure that the two 2 outer holes on the suspension adapter N align with the holes on the slotted extension on the upper plate E 8 Screw the two screws removed in step 2 into the two 2 holes to secure the suspension adapter N to the upper plate E 9 Attach the swivel bracket G to the suspension adapter N and secur
5. e them with the two screws removed in step 1 10 Secure the upper plate E to the ceiling D using the commercially available hardware F suitable for your environment Be sure that the swivel bracket G arrow is pointing toward your screen 11 Carefully raise the projector C with the mounting bracket B attached and insert it into the bottom of the swivel bracket G by its tabs 12 Rotate the projector C with the mounting bracket B attached 1802 so that the projector s focus ring is pointing toward your screen 13 Align the safety screw H on the swivel bracket G with the end of the arrow shaped slot on the mounting bracket B and screw it through the opening to prevent further rotation Hand tighten the screw H 14 _Hand tighten the remaining two clamp screws J to secure the mounting bracket B to the swivel bracket G Check all of the hardware for proper tightness and security Do not over tighten the screws FIGURE 3 Ceiling lt ey k F f j i F l aie i f i z REN Pe N H am iH pi J k i iy f SSH i reer x B Mounting Bracket Projector Wall Mount Installation Complete the following steps to install the projector mount and projector to your wall FIGURE 4 Note Look at the bottom of the swivel bracket G and locate the arrow Make sure you install the projector mount with the arrow pointing toward your screen 15 16 17
6. he installation environment please consider having it reinforced and having the projector installed by qualified personnel Failure to do so could result in serious personal injury and damage to the projector ISTED 176225 Copyright by InFocus Corporation Wilsonville OR All rights reserved e To avoid personal injury use only an approved projector mount Using an unauthorized projec tor mount may lead to poor ventilation and projector failure e When installing the projector mount keep in mind that the projector s focus ring is not squarely in the center of the front of the projector but offset by several inches Make sure that when you mount the projector you offset the installation to match the amount of inches that the projector s focus ring is offset from the center of the front of the projector Getting the Digital Projector Ready Before you start the installation process prepare your Digital Projector by performing the following steps FIGURE 1 1 Turn the projector C upside down and place it on a clean flat surface preferably on a towel 2 Locate the mounting bracket B and align it over the holes on the projector 3 Locate the three 3 4 mm x 8 mm Phillips head screws A 4 Use the Phillips head screwdriver to secure the mounting bracket B to the projector via the three 3 Phillips head screws A Do not over tighten the screws Figure 1 Tools Needed for Installing the Digital Project
7. or Mount You need the following tools to install the Digital Projector Mount e Phillips head screwdriver not included e Allen wrench included e Drill for installation environment only do not use a drill on the Digital Projector or the Digital Projector Mount and drill bit to match the hardware for your installation environment not included e The commercially available hardware F thatis required by your installation environment not included Projected Image Sizes For image sizes based upon the projector s distance to the screen consult the Projected Image Size section in your projector s User s Guide Hardware Description The Digital Projector Mount utilizes the following hardware Note that the letters associated with the hardware on this list correspond to the letters listed in the instructions for each installation method A Three 3 4 mm x 8 mm Phillips head screws B One 1 mounting bracket C Digital Projector not included D Ceiling structure not included E One 1 upper plate F SINGLE WOOD STUD If mounting on a single wood stud use three 3 5 16 x 2 Lag bolts minimum commercially available Use the mounting points on the center of the plate SOLID STRUCTURE If mounting to a solid structure use four 4 5 16 x 2 Lag bolts minimum commercially available Use the mounting points on the outer points of the plate G One 1 swivel bracket unitattached
8. t G Check all of the hardware for proper tightness and security Do not over tighten the screws FIGURE 4 a tl E a z T tel D wo z n
Download Pdf Manuals
Related Search