Impex PHC 750 User's Manual
Contents
1. LIMITED WARRANTY IMPEX Inc IMPEX warrants this product to be free from defects in workmanship and material under normal use and service conditions for a period of two years on the Frame from the date of purchase This warranty extends only to the original purchaser IMPEX s obligation under this Warranty is limited to replacing or repairing at IMPEX s option All returns must be pre authorized by IMPEX Pre authorization may be obtained by calling IMPEX Customer Service Department at 1 800 999 8899 All freights on products returned to IMPEX must be prepaid by the customer This warranty does not extend to any product or damage to a product caused by or attributable to freight damage abuse misuse improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes No other warranty beyond that specifically set forth above is authorized by IMPEX IMPEX is not responsible or liable for indirect special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss loss of property loss of revenues or profits loss of enjoyments or use costs of removal installation or other consequential damages or whatsoever natures Some states do not allow the exclusion or limitation of incidental or consequential damages Accordingly the above limitation may not apply to you The wa2. lift the Backrest Board to vertical position and secure it with a 4 L shaped Pin 25 NOTE The vertical support is not designed to sustain any weight The only purpose of it is to get the Backrest Board out of the user s way when doing squat DIAGRAM 3 STEP 4 See Diagram 4 A Attach the Leg Developer 14 to the bracket on top of the Leg Developer Holder 5 Secure it with an Axle 48 two 34 Washers 45 and two M10 x 5 8 Allen Bolts 43 Slide the Olympic Sleeve 55 onto the post on the Leg Developer Attach a Spring Clip 21 to the Sleeve Note When using the decline position to do Ab exercises place at least 30lbs of weights on the Sleeve to hold down the Leg Developer Insert one Foam Roll Tube 15 halfway through the hole on the Leg Developer Holder Insert two Foam Roll Tubes 15 halfway through the holes on the Leg Developer 14 Push six Foam Rolls 16 onto the Tubes from both sides Plug six Foam Roll End Caps 33 to the ends Attach the Arm Curl Pad 19 to the Arm Curl Stand 13 Secure it with two M8 x 5 8 Hex Bolts 42 and 5 8 Washers 46 Insert the Arm Curl Stand into the top opening in front of the Seat D Attach the Curl Bar Holder 49 to the Leg Developer 14 Align the holes and secure it with 2 34 L shaped Pin 53 Attach a 3 8 Spring Clip 54 to the Pin Attach two Spring Clips 21 to both ends of Curl Bar 50 Place the Curl Bar on the Curl Bar Ho
3. NOTE Please read all instructions carefully before using this product Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model PHC 750 Retain This Manual for Reference 09 26 01 OWNER S MANUAL VIP ZX FITNESS PRODUCTS POWERHOUSE CLUB PHC 750 IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD CITY OF INDUSTRY CA 91746 Tel 800 999 8899 Fax 626 961 9966 www impex fitness com nio impex fitness com TABLE OF CONTENTS BEFORE YOU BEGIN tr rar pa rra n RR eur rk E Ex d cxx nt vex Mida 1 IMPORTANT SAFETY NOTICES 9i mx iara ie haac ane ea p ncs 2 HABDWABMEJTBDENLEIEIBE n itDushiotho e ohh Chas Achat toS do otis 3 ASSEMBLY INSTRUCTIONS 4 isndisetvandud eara casks pend cla Red ed a dard asin nad daca vee 4 EXPLODED BDIAGBAM 225382458 p RiS Ep Cu P VER e fcd a mE e eV au eda iae cvv a n da 8 mi aped IPM M 9 WARRANTY as cedo echt dca oie d Ort id dh ti quaudo ant dereud quaii og ania dd 10 ORDERING PARTS ode bababsed bead bibere 10 BEFORE YOU BEGIN Thank you for selecting the POWERHOUSE PHC 750 by IMPEX FITNESS PRODUCTS For your safety and benefit read this manual carefully before using the machine As a manufacturer we are committed to provide you complete customer satisfaction If you have any questions or find there are missing or damaged parts we guarantee you complete satisfaction through direct assistance from our factory To avoid unnecessary delays plea
4. amm CARRIAGE BOLT ALLEN BOLT AIRCRAFT NUT FLAT WASHER ASSEMBLY INSTRUCTION Tools Required to Assemble the Machine Two Adjustable Wrenches and Allen Wrenches NOTE It is strongly recommended this machine to be assembled by two or more people to avoid possible injury STEP1 See Diagram 1 A Connect the two Upright Beams 1 by a Cross Brace 2 in the mid span Align the holes and secure them with one Bracket 20 two M10 x 3 1 8 Carriage Bolts 38 two 34 Washers 45 and two M10 Aircraft Nuts 44 on each end of the Cross Brace B Place Backrest Adjustment Bar 4 between the two Upright Beams on the selected bar holder to obtain desired incline of Backrest C Insert two Crutches 7 into the top openings on the Upright Beams Secure them with two Lock Knobs 23 through selected holes to obtain desired height of the Supports D Slide a Rubber Bumper 22 onto a Weight Post 8 Insert the Post into the hole on the back of the Upright Beam 1 Secure it with one M10 x 1 Allen Bolt 37 and 34 Washer 45 Repeat the same step to install the other side DIAGRAM 1 STEP2 See Diagram 2 A Attach the Leg Developer Holder 5 to the Front Stabilizer 6 Secure it with three M10 x 5 8 Allen Bolts 43 and 34 Washers 45 B Attach the Leg Developer Holder 5 to the front of Main Seat Support 3 Secure it with one M10 x 2 Carriage Bolt 56 two M10 x 2 34 Ca
5. e the machine without a qualified person or physician in attendance 10 Before using the machine to exercise always do stretching exercises to properly warm up 11 Never operate the machine if the machine is not functioning properly 12 A spotter is recommended during exercise Co N WARNING BEFORE BEGINNING ANY EXERCISE PROGRAM CONSULT YOUR PHYSICIAN THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE EXISTING HEALTH PROBLEMS READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT IMPEX INC ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT SAVE THESE INSTRUCTIONS HARDWARE IDENTIFIER PLACE WASHER END OF BOLT OR SCREW ON CIRCLE TO CHECK FOR CORRECT SIZE REPLACEMENT PARTS MILLIMETERS Thank you for purchasing IMPEX product Although we go to great effort to ensure O C C the quality of our products Occasionally Me Mw Mio errors or omissions occur Should you find either a defective or missing part in this product Please contact us for a replacement at the telephone number O C QUESTION sA 1 800 999 8899 1 2 5 8 3 4 NOTE When installing a Aircraft Nut also called Nylon or Lock Nut Please use two adjustable wrenches to tighten down the Nut Hold down the Bolt with one wrench and use the other wrench to turn the Nut clockwise INCHES Length GE 1 7 7771 HEX HEAD BOLT C6 B 3
6. lder for Arm Curl exercises DIAGRAM 4 UD C x la a OS NS 3 VAN NN CD NE 4H e 6 FG H a a Er a O H A bast E PARTS LIST KEY NO DESCRIPTION y o 1 Upright Beam 2 2 Cross Brace 1 3 Main Seat Support 1 4 Backrest Adjustment Bar 1 5 Leg Developer Holder 1 6 Front Stabilizer 1 7 Crutch 2 8 Weight Post 2 9 Backrest Incline Support 1 10 Backrest Support 2 11 Seat Bracket 1 12 Seat Incline Adjustment 1 13 Arm Curl Stand 1 14 Leg Developer 1 15 Foam Roll Tube 3 16 Foam Roll 6 17 Seat Pad 1 18 Backrest Board 1 19 Arm Curl Pad 1 20 Bracket 3 21 Spring Clip 3 22 Rubber Bumper 2 23 Lock Knob 3 24 3 1 8 Sleeve 2 25 4 L shaped Pin 2 26 1 Cone shaped End Cap 5 27 1 End Cap 1 28 21 1 8 End Cap 2 29 2 3 8 Square End Cap 4 30 1 Square End Cap 3 31 2 Square End Cap 2 32 2 3 8 x 1 5 8 End Cap 2 33 Foam Roll End Cap 6 34 2 3 8 Bushing 2 35 2 Sleeve 1 36 Bushing 2 37 M10 x 1 Allen Bolt 4 38 M10 x 3 1 8 Carriage Bolt 4 39 M10 x 2 34 Carriage Bolt 4 40 M6 x 1 3 8 Hex Bolt 4 41 M10 x 7 4 Hex Bolt 1 42 M8 x 5 8 Hex Bolt 6 43 M10 x 5 8 Allen Bolt 5 44 M10 Aircraft Nut 10 45 34 Washer 20 46 5 8 Washer 6 47 v Washer 4 48 Axle 1 49 Curl Bar Holder 1 50 Curl Bar 1 51 Curl Bar Sleeve 2 52 2 Cone shaped End Cap 2 53 2 34 L shaped Pin 1 54 3 8 Spring Clip 1 55 Olympic Sleeve 1 56 M10 x 2 Carriage Bolt 1 9 IMPEX INC
7. rranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein Some states do not allow limitations on how long an implied warranty lasts Accordingly the above limitation may not apply to you This warranty gives you specific legal right You may also have other rights which vary from state to state Register on line at www impex fitness com IMPEX INC 14777 Don Julian City of Industry CA 91746 ORDERING REPLACEMENT PARTS Replacement parts can be ordered by calling our Customer Service Department toll free at 1 800 999 8899 during our regular business hours Monday through Friday 9 am until 5 pm Pacific standard time info impex fitness com When ordering replacement parts always give the following information Model Description of Parts Part Number Date of Purchase OS 10
8. rriage Bolts 39 three 32 Washers 45 and three M10 Aircraft Nuts 44 C Attach the back of Main Seat Support 3 to the Cross Brace 2 Secure it with one Bracket 20 two M10 x 2 Carriage Bolts 39 34 Washers 45 and M10 Aircraft Nuts 44 D Insert one Lock Knob 23 into the hole on the back of Leg Developer Holder DIAGRAM 2 STEP 3 See Diagram 3 A Attach the hole side of the Seat Bracket 11 to the Pivot on the Main Seat Support 3 Push two Bushings 36 into the holes on the Pivot B Attach the Backrest Supports 10 to the Pivot Secure it with one M10 x 7 14 Hex Bolt 41 two 34 Washers 45 and one M10 Aircraft Nut 44 DO NOT tighten the nut and bolt yet Place the Backrest Incline Support 49 in between the two Backrest Supports 10 Securely tighten the Nut 44 and Bolt 41 C Place Backrest Board 18 onto the Backrest Supports 10 Secure it with four M6 x 1 3 8 Hex Bolts 40 and 7 Washers 47 D Place the Seat Pad 17 onto the Seat Bracket 11 Secure the two back holes on the Seat with two M8 x 5 8 Hex Bolts 42 and 2 5 8 Washers 46 Secure the two front holes on the Seat with a Seat Incline Adjustment 12 two M8 x 5 8 Hex Bolts 42 and two 5 8 Washers 46 Insert a 4 L shaped Pin 25 into the selected hole on the Seat Incline Adjustment to hold the desired seat incline When using the Uprights to do squat exercises
9. se call our TOLL FREE customer service number Our Customer Service Agents will provide immediate assistance to you Toll Free Customer Service Number 1 800 999 8899 Mon Fri 9 a m 5 p m PST www impex fitness com nfo impex fitness com IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety However certain precautions apply whenever you operate a piece of exercise equipment Be sure to read the entire manual before you assemble or operate your machine In particular note the following safety precautions 1 Keep children and pets away from the machine at all times DO NOT leave children unattended in the same room with the machine Only one person at a time should use the machine If the user experiences dizziness nausea chest pain or any other abnormal symptoms STOP the workout at once CONSULT A PHYSICIAN IMMEDIATELY 4 Position the machine on a clear leveled surface DO NOT use the machine near water or outdoors 5 Keep hands away from all moving parts 6 Always wear appropriate workout clothing when exercising DO NOT wear robes or other clothing that could become caught in the machine Running or aerobic shoes are also required when using the machine 7 Use the machine only for its intended use as described in this manual DO NOT use attachments not recommended by the manufacturer 8 Do not place any sharp object around the machine 9 Disabled person should not us
Download Pdf Manuals
Related Search