iHome IP21 User's Manual
Contents
1. 10 Maintenance e Place the unit on a level surface away from sources of direct sunlight or excessive heat e Protect your furniture when placing your unit on a natural wood and lacquered finish A cloth or other protective material should be placed between it and the furniture e Clean your unit with a soft cloth moistened only with mild soap and water Stronger cleaning agents such as Benzine thinner or similar materials can damage the surface of the unit FCC Information This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules These limits provide reasonable protection against radio and TV interference in a residential area However your equipment might cause TV or radio interference even when it is operating properly To eliminate interference you can try one or more of the following corrective measures Reorient or relocate the receiving antenna Increase the distance between the equipment and the radio or TV Use outlets on different electrical circuits for the equipment and the radio or TV Consult your dealer or an experienced radio television technician2. Note Please make sure you are using the correct insert for your iPhone iPod see page 1 and that it is properly docked into the iP21 1 While your iPhone iPod is docked in the unit and the unit is connected to AC power it recharges until fully charged The iP21 will not overcharge your iPhone iPod Note that other non docking iPod models will NOT charge To check for iPhone iPod compatibility iP21 is an advanced system and supports most updated iPhone iPod features To ensure your iPhone iPod works properly with the iP21 please update your iPhone iPod firmware with the latest version available through iTunes Listening to your iPhone iPod ls Dock the already playing iPhone iPod The iP21 will automatically turn on and you will hear the music playing from your iPhone iPod The iPhone iPod Icon will appear at the right lower corner the display indicating iPhone iPod playing mode For enhanced bass press the EXB Expanded Bass Switch located on the back of the unit to turn ON Note If the playing song music loudness is too low on the iPhone iPod itself the iP21 may not detect that the iPhone iPod is in play mode Press the gt If Button on the iP21 to play it 2 3 4 5 When the iPhone iPod is docked and in standby mode press the PII Button on the iP21 to play it The iPhone iPod Icon will appear at the right lower corner the display indicating iPhone iPod playing mode Press the gt II Button again to pause play
3. affecting the alarm volume Press the and Button on the iP21 to adjust the sleep volume The sleep volume will remain at that level the next time you enter sleep mode until controls are changed To stop listening at any time press the Button on the iP21 to turn it off Nap Operation a 2 3 Press the Nap Button on the top left of the iP21 as needed to set a nap time of 15 30 60 or 90 minutes The alarm will come on after the set duration If no iPhone or iPod is detected a buzzer alarm will sound Press the Nap Button during the nap cycle to view the nap time remaining Press again to change to the next highest nap time setting When Nap timer comes on the Sleep Nap icon will flash and unit will play iPhone or Pod buzzer if no player detected Press the Button to turn the nap alarm mode off Note Sleep and Nap modes are independent you can not run both at the same time Snooze Dimmer Operation 1 N Press the Snooze Dimmer Button on the iP21 after the alarm sounds The alarm will go off and will come on again in approx 9 minutes You may repeat this cycle several times during the one hour alarm cycle During normal operation press the Snooze Dimmer Button to control the brightness high medium low and off of the LCD display A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner this unit has been designed and manufactured to ensure your personal safety How
4. A 10 Printed in China
5. Model iP21 Alarm Clock for your iPhone iPod Questions Visit www ihomeaudio com Table of Contents Quick Start 1 Controls and Indicators 2 IP 2a DISDIAY S22 eeeneeascs Sele ea ee a A 8 Install Clock Backup Battery 3 petting Wothe P2 a e ee 4 Charging your iPNOne I Pod ss s9 sssss sss asases saeansesesesnse na cases ceseaa sean Seen aennsnaosaneansanseass 4 Listening to your iPhone iPod 5 Alarm Operation 6 Sleep Operation Nap Operation 7 Snooze Dimmer Operation 7 A Consumer Guide to Product Safety 8 Trouble Shooting 9 Warranty Information
6. atter and service still be required by reason of any defect or malfunction during the warranty period SDI Technologies will repair or at its discretion replace this product without charge except for a 10 00 charge for handling packing return UPS postage and insurance This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed below The product must include proof of purchase including date of purchase The fee for service without proof of purchase is 20 00 Before returning this product for service please first replace the batteries if applicable with fresh ones as exhausted or defective batteries are the most common cause of problems encountered If service is still required 1 Remove the batteries if applicable and pack the unit in a well padded heavy corrugated box 2 Enclose a photocopy of your sales receipt credit card statement or other proof of the date of purchase if within the warranty period 3 Enclose a check or money order payable to the order of SDI Technologies for the sum of 10 00 20 00 without proof of purchase 4 Send the unit prepaid and insured to the Factory Service Center listed below Consumer Repair Department SDI Technologies Inc 1330 Goodyear Drive El Paso TX 79936 6420 Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i pro
7. d into an AC socket Cleaning The unit should be cleaned only as recommended See the Maintenance section of this manual for cleaning instructions Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product Attachments Do not use attachments not recommended by the product manufacturer Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and power line surges Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally Periods of Nonuse If the unit is to be left unused for an extended period of time such as a month or longer the power cable should be unplugged from the unit to prevent damage or corrosion Servicing The user should not attempt t
8. ducts which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI Technologies or any of its affiliates contractors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI Technologies product 2011 SDI Technologies Inc All rights reserved Questions Visit www ihomeaudio com or call 1 800 288 2792 Toll Free iP21 052411
9. ever improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit T 2 oo N Q 10 ANT 12 13 Water and Moisture The unit should not be used near water For example near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a built in installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance Power Cable Protection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them It is always best to have a clear area from where the cable exits the unit to where it is plugge
10. if the problem still exists Modifying or tampering with your system s internal components can cause a malfunction and might invalidate the system s warranty and void your FCC authorization to operate it This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Battery Warning For models that use Lithium batteries For models that require more than one battery e Lithium batteries can explode or cause burns if Do not mix with used or other battery types brands disassembled shorted recharged exposed to water Replace all cells at the same time fire or high temperatures amp not handled appropriately Do not place loose batteries in a pocket purse or other container containing metal objects mix with used or other battery types or store with hazardous or e Do not open batteries Do not dispose of in fire Do not heat above 75C 167F combustible materials e Do not expose contents to water e Store in cool dry ventilated area e Do not charge or recharge Follow applicable laws and regulations for transport e Do not install backwards and disposal 2 inserts 3 iPhone iPod SS EE oF RES ANNS A Attach AC adaptor cable to jack on Select the dock insert for your Insert iPhone iPod into dock with proper insert back of the iP21 and plug the other iPhone iPod model from the table iPhone iPod must not be in a s
11. ill appear on the display and a long beep will sound If this happens please try again with a different iPhone or iPod if needed If sync still fails please see Setting Time Manually below to set the clock NOTE iPhone time is automatically updated to the correct time via cell phone towers The time on your iPod is accurate only to the time on the computer the last time the iPod was synced to it It s possible to have up to 59 seconds difference between the iP21 and synced iPhone iPod Setting the Time Manually The iP21 features a Daylight Saving Time DST switch to quickly add or subtract an hour for daylight saving time or standard time 1 During daylight saving time move the DST switch to the 1 position The DST Icon will appear next to the time display to indicate DST is on During standard time move the DST switch to the 1 position 2 Press and hold the Time Sync Set Button until the display flashes Press the Hour Set Button until the current hour is displayed Next press the Minute Set Button to set the current minute 3 Press the Time Sync Set Button again to confirm the clock setting You should hear 2 beeps indicating the clock time is set 3 For 12 hour or 24 hour time format setting Press the Button during time setting to set 12 hour or 24 hour display format Remember to set the correct AM or PM time an icon to the right of the time display is the PM indicator there is no AM indicator Charging your iPhone iPod
12. ilure The CR2032 battery comes installed in the unit Simply pull the tab to initiate contact If a power failure occurs or the AC adaptor is accidentally disconnected the display backlight will not remain lit but current time and alarm time settings will be temporarily maintained Otherwise you must reset the time and alarm settings When the Battery Low indiator blinks on the display the battery should be replaced 1 Please make sure the AC adaptor is connected Otherwise all settings may be lost during battery installation replacement 2 Using a Phillips screwdriver open the battery compartment door located on the bottom of the unit 3 Remove the old battery and insert one CR2032 button cell battery checking that the side is facing upwards Replace the compartment door Note Make sure you dispose of batteries properly see your local regulations Installing Backup Battery 3 Setting Up the iP21 Setting the Clock Time Using Time Sync The iP21 Time Sync feature allows you to sync the time setting on the iP21 to the time from your iPhone or recent model iPod iPod touch iPod nano and iPod Classic older iPod models such as iPod mini do not support this feature 1 Press the Time Sync Set Button located at the back of the unit Sync flashes on the lower part of the display 2 Once sync is completed you will hear 2 beeps and the display will show the updated time 3 If sync was not successful FAIL w
13. kin or case end into a wall socket below and place insert in dock iPhone iPod will charge while docked To remove insert place thumbnail in Press PII Button on iP21 to play iPhone iPod slot and gently pull upwards ee iPod touch 2G iPhone 4 nano 6G touch 4G sak F nano 6G For this iPhone iPod iPod touch 2G 8G iPod touch 4G 4 time SYNC e Make sure your iPhone or iPod is properly docked D PM e Press the Time Sync Set button on the back of the unit 10 A 4 e SYNC will appear on the display e D e f FAIL appears try again with a different iPhone or iPod i _i l or see Setting Time Manually page 4 Controls and Indicators Front Panel iPod Dock Nap Set Button iPhone iPod Play Pause Button Sleep Set Button Lower Volume Button Alarm Reset Power Off Raise Volume Button Button Hour Set Button Snooze Dimmer Button Minute Set Button Alarm Set Alarm On Off Button Back Panel Time Sync Set Button EXB Expanded Bass Button DST Switch t DC Jack iP21 Display m PM Indicator Sleep NAP Indicator Daylight Saving Time Indicator iPhone iPod Indicator Time Display Battery Low Indicator Alarm Indicator Install Clock Backup Battery The iP21 uses a CR2032 button cell backup battery system to provide continuous alarm operation and clock settings in the event of a power fa
14. king it to the unit Please refer to your iPhone iPod manual for details on iPhone iPod operation 4st or and Using generation iPod or other device iP21 cannot control those iPhone iPod or other devices iPhone iPod didn t charge up iPhone iPod is not docked properly Remove your iPhone iPod from the connector and check for any obstruction on the connectors in the dock and on your iPhone iPod Then reseat it in the dock iPhone iPod is locked up frozen iPhone iPod battery has problem Please make sure your iPhone iPod is working properly before docking it to the unit Please refer to your iPhone iPod manual for details Sound is distorted Volume level is set too high Decrease the volume Turn off EXB bass effect Sound source is distorted If iPhone iPod original sound source is poor quality distortion and noise are easily noticed with high power speakers Try a different audio file from a trusted source such as iTunes Limited One Year Warranty Information iHome Products a division of SDI Technologies Inc hereafter referred to as SDI Technologies warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of One Year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the m
15. m press the Snooze Dimmer Button The alarm will be silenced for 9 minutes then come on again e To turn the alarm off press the Button The alarm will come on again the next day at the same time 5 If the alarm is not turned off after it sounds it will play for approximately one hour then turn off automatically This cycle will repeat every 24 hours unless the controls are changed Note Please make sure your iPhone iPod has enough songs to play for one hour otherwise please set the iPhone iPod repeat mode to ON Note If there is no iPhone iPod present or there is no music detected on the iPhone iPod at alarm time the iP21 will automatically switch to buzzer alarm Sleep Operation N oo gt A a When the iP21 is off or while listening to your iPhone iPod press the Sleep Button to enter sleep mode The Sleep Icon will appear on the display to indicate it is in sleep mode Sleep mode has a Gentle Sleep feature which gradually lowers the volume before it shuts off You can adjust the sleep timer from 90 60 30 or 15 minutes by pressing the Sleep Button again The unit will automati cally turn off after the selected time When the display changes back to show the real time pressing the Sleep Button once will show the sleep time remain ing Pressing it again will change the sleep time to the next lowest increment The iP21 has an independent volume setting for sleep mode so you can adjust the sleeping volume without
16. o service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualified service personnel Questions Visit www ihomeaudio com 8 Trouble Shooting Symptom Possible Problems Solution S Unit doesn t respond no power AC adaptor isn t plugged to a wall outlet or the connector is not plugged into the power supply jack on the back of the unit Plug the AC adaptor into a wall outlet and plug the connector into the power supply jack on the unit Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working iPhone iPod cannot dock properly Using no or wrong iPod insert Make sure the dock insert is the proper fit for your iPhone iPod iPhone iPod is not docked properly Remove your iPhone iPod from the connector and check for any obstruction on the connectors in the dock and on your iPhone iPod Then reseat it in the dock iPhone iPod does not respond to the unit iPhone iPod is not docked properly Remove your iPhone iPod from the connector and check for any obstruction on the connectors in the dock and on your iPhone iPod Then reseat it in the dock Your iPhone iPod software is too old Upgrade software on your iPhone iPod via iTunes on your computer iPhone iPod is locked up Please make sure your iPhone iPod is working properly before doc
17. press again to resume it Press the and Button on the iP21 to adjust the system volume To turn the iP21 OFF press the on the iP21 Your iPhone iPod will continue charging while in the dock Alarm Operation The iP21 Home System for iPhone iPod features Sure Alarm If a power failure occurs or the AC adaptor is accidentally disconnected the unit will change to buzzer alarm to wake you up provided you have installed backup battery This unit also features Gentle Waking which gradually increases the volume of whatever alarm you set NOTE TO WAKE TO iPhone iPod YOUR iPhone iPod MUST BE PROPERLY DOCKED AND OFF NOT IN PLAY MODE OR NO ALARM WILL SOUND Setting the Alarm Time 1 Press and hold the Button for 2 seconds until the display flashes Press the Hour Button until the desired alarm hour is displayed Next press the Minute Button to set the desired alarm minute Remember to set the correct AM or PM if you are using 12 hour clock format 2 Press the Button again to exit the setting mode You should hear 2 beeps indicating the alarm is set Note Once you set the alarm time the alarm will be automatically armed indicated by the Alarm Icon To disarm the alarm press the Button The Alarm Icon will disappear and the alarm will not sound at the set time Note Make sure to adjust volume level for comfortable wake up volume 4 When the alarm is sounding the Alarm Icon will flash e To snooze during the alar
Download Pdf Manuals
Related Search