IBM NWAYS 712 User's Manual
Contents
1. 8271 Nways ETHERNET LAN SWITCH MODEL 712 QUICK INSTALLATION GUIDE IBM 8271 Model 712 Switch User s Guide Quick Reference Guide 4 x rubber feet Quick Installation Guide 2 x mounting brackets 6 x fixing screws Release Notes Installing the Switch DANGER yJ 02L1318 1 As required The User s Guide also contains further informa tion on the following steps Into a 19 inch rack Fit the brackets as shown in 1 below to each side of the unit Following the manufacturer s instructions secure the unit into the rack On the wall Place the unit the right way up on a hard flat sur face with the front facing towards you Fit the brackets as shown in 2 below to each side of the unit Place the base of the unit against the wall ensuring that the ventilation holes face sidewards and the front panel faces upwards Secure using suitable screws and fixings not supplied The wall surface should be smooth flat dry and sturdy Use a plywood sheet between the unit and wall a Fit a Plug in Module b Connect network cabling Connect the power cord to the IEC socket on the rear of the Switch and to your mains socket The 8271 Model 712 Switch has no ON OFF switch the2. only method of connecting or discon necting mains power is through the power cord The Switch enters a Power On Self Test POST The time taken for the test to complete is depen dent on the type of POST configured for the unit For a new Switch that is being installed for the first time power up takes approximately 18 sec onds Check the status LEDs to ensure the Switch is operating correctly Intelligent Flow Management IFM should be dis abled if the port is connected to a repeated seg ment where the traffic is mainly local to that segment Further information on these steps is available in m IBM 8271 Nways Ethernet LAN Switch Model 712 User s Guide Part Number 02L1318 IBM 8271 Nways Ethernet LAN Switch Model 712 Quick Reference Guide Part Number 02L1350 Part No 02L1350 Published October 1997
Download Pdf Manuals
Related Search