HP tx2-1012nr Memory Modules User Guide
Contents
1. Memory Modules User Guide Copyright 2008 Hewlett Packard Product notice Development Company L P This user guide describes features that are The information contained herein is subject common to most models Some features to change without notice The only may not be available on your computer warranties for HP products and services are set forth in the express warranty statements accompanying such products and services Nothing herein should be construed as constituting an additional warranty HP shall not be liable for technical or editorial errors or omissions contained herein First Edition November 2008 Document Part Number 501595 001 Table of contents II Carina dida rl E AE ET lid Adding or replacing a memory module The computer has one memory module compartment which is located on the bottom of the computer The memory capacity of the computer can be upgraded by adding a memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot WARNING To reduce the risk of electric shock and damage to the equipment unplug the power cord and remove all batteries before installing a memory module CAUTION Electrostatic discharge ESD can damage electronic components Before beginning any procedure ensure that you are discharged of static electricity by touching a grounded metal object NOTE To use a dual channel configuration when addi2. do not bend the memory module a Align the notched edge 1 of the memory module with the tab in the memory module slot b With the memory module at a 45 degree angle from the surface of the memory module compartment press the module 2 into the memory module slot until it is seated c Gently press the memory module 3 down applying pressure to both the left and right edges of the memory module until the retention clips snap into place A CAUTION To prevent damage to the memory module be sure that you do not bend the memory module 11 Align the tabs 1 on the memory module compartment cover with the notches on the computer 12 Close the cover 2 13 Tighten the 2 memory module compartment screws 3 14 Replace the battery 15 Turn the computer right side up and then reconnect external power and external devices 16 Turn on the computer 4 Adding or replacing a memory module Index M memory adding memory modules 1 replacing memory modules 1 upgrading memory modules 1 memory module adding 1 inserting 2 removing 2 replacing 1 upgrading 1 memory module compartment cover removing 2 replacing 3 Index 5
3. ng a second memory module be sure that both memory modules are the same size To add or replace a memory module 1 Save your work 2 Shut down the computer and close the display If you are not sure whether the computer is off or in Hibernation turn the computer on by sliding the power switch briefly to the right Then shut down the computer through the operating system Disconnect all external devices connected to the computer Unplug the power cord from the AC outlet Turn the computer upside down on a flat surface Remove the battery from the computer SN PA AA Loosen the 2 memory module compartment screws 1 8 Lift the memory module compartment cover 2 away from the computer 9 If you are replacing a memory module remove the existing memory module a Pull away the retention clips 1 on each side of the memory module The memory module tilts up b Grasp the edge of the memory module 2 and gently pull the module out of the memory module slot A CAUTION To prevent damage to the memory module hold the memory module by the edges only Do not touch the components on the memory module To protect a memory module after removal place it in an electrostatic safe container 10 Insert a new memory module 2 Adding or replacing a memory module A CAUTION To prevent damage to the memory module hold the memory module by the edges only Do not touch the components on the memory module and
Download Pdf Manuals
Related Search