HP 1000s Reference Guide
Contents
1. BOGE TAD bp StorageWorks NAS 1000s NIC 1 and NIC 2 status Hard disk status 4 Hard disk access 4 Power button Poweron Status OOSEEEAS AS OQI D Fi ED ey 5 e a ii LVD SCSI Controller connector RJ 45 connector for NIC 1 RJ 45 connector for NIC 2 USB connectors 2 black Keyboard connector purple 3 Prepare the Server 1 Remove the inner slides from the slide rail assemblies AC power plug Mouse connector green Video connector blue Serial port teal PCI expansion slot o a From the front of the rack extend the inner slide rails until they lock in place b Press the inner slide lock green tab down to release and then pull the inner slide rail straight out 2 Attach the two thumbscrew brackets to the server using the supplied screws as shown 3 Attach the inner slide rails to the server using the supplied screws as shown 4 Install the Server 5 Install the Cable Arm 1 Insert the inner slide rails with the NAS server attached into the 1 Thread the velcro straps through the cable management arm outer slide rails as shown Push the server all the way into the as shown rack making sure that the inner slide rails lock into place2. 2 Attach the cable management arm to the slide rail at the back of the rack 2 Slide the server in and out of the rack several times allowing a Insert the cable arm s hinged bracket into the slide rails the rails to position properly receiving hooks 3 Lock the server in place using the thumbscrews b Rotate the bracket forward and lock into place with the spring loaded tab 3 Insert the front of the cable managements arm into the receiving clip of the slide rail assembly as shown Inne Bwt N AE Neus Ne gt Dnran unl 6 Cable the Server Product Documentation 1 Connect the required cables to the back of the server HP StorageWorks NAS 1200s Rack Installation Instructions contains rack installation instructions for experienced installers HP StorageWorks NAS 1200s 1U rack template serves as a tool to quickly measure and mark a rack for proper installation of a NAS 1200s HP StorageWorks NAS 1200s Installation Guide provides product overview requirements and configuration options and instructions for the NAS 1200s HP StorageWorks NAS 1200s Documentation CD contains electronic versions of all NAS 1200s product documents inc
3. Warnings and Cautions Rack Installation WARNING Before you begin make sure that the rack is sufficiently stable If provided lower the rack leveler feet and Instructions make sure any required stabilizers are installed If provided extend the rack anti tip device Failure to extend the anti tip device could result in personal injury or damage if the rack tips over CAUTION Make sure that the rack and all equipment mounted in the rack have a reliable ground connection Verify p to rd g e OrKS that the total current of the rack components does not exceed the current rating of the power distribution unit or outlet NAS 1200s Eo o ooa O invent Copyright 2003 Hewlett Packard Development Company L P Hewlett Packard Company makes no warranty of any kind with regard to 1 Prepare the Rack his material including but not limited to the implied warranties of merchantability and fitness for a particular purpose Hewlett Packard shall not be liable for errors 1 Use the template to locate and mark the holes using a pencil contained herein or for incidental or consequential damages in connection with p g a per he furnishing performance or use of this material where the cage nuts need to be installed on the vertical rails of This document contains proprietary information which is protected by copyright the rack ie o part of this document may be photocopied reproduced or translated into another language without the
4. prior written consent of Hewlett Packard The g information contained in this document is subject to change without notice Hewlett Packard Company shall not be liable for technical or editorial errors or omissions contained herein The information is provided as is without warranty of any kind and is subject to change without notice The warranties for Hewlett Packard Company products are set forth in the express limited warranty statements accompanying such products Nothing herein should be construed as constituting an additional warranty 2 D D Q x 2 HP StorageWorks NAS 1200s Rack Installation Instructions First Edition May 2003 Part Number 351 699 001 351699 001 Rack Template Inner slide rails removed for clarity Outer slide rails Cable management arm NAS 1200s server Velcro straps Cage Nuts Thumbscrew brackets Assorted screws not shown ooo 00 0000 2 install the Rails 1 Install the slide rail assemblies as shown using the supplied screws IMPORTANT Leave the screws in the back a little loose until the server is completely installed and has been moved in and out of the rack a few times This allows the rails to position properly and prevents binding Once step 4 Install the Server is complete tighten the screws completely We See See amp a Ty
5. luding MH Administration Guide E Quick Start Guide E Rack Installation Instructions HP Warranty fulfillment document provides information on how to obtain a printed warranty for your NAS 1200s HP Important Safety Information booklet AC power plug Mouse connector green Video connector blue Serial port teal PCI expansion slot oeo06 N velcro straps as shown SouGooGeoo E O00000 Route and secure the cables to the bagionnionoiqrinnoinnig contains information about common sense precautions necessary when working with equipment powered at wall receptacle service levels LVD SCSI Controller connector RJ 45 connector for NIC 1 RJ 45 connector for NIC 2 USB connectors 2 black Keyboard connector purple management arm using the mapio Installation is now complete Refer to the HP StorageWorks NAS 1200s Installation Guide for configuration
Download Pdf Manuals
Related Search