Home

HP N6350 User's Manual

Contents

1. 4 Remove any jammed pages from the ADF output tray 5 Close the ADF roller cover and access door 6 At the scan destination examine the scan output to determine which page was the last to be completely scanned Automatic document feeder ADF problems 49 Chapter 5 7 Reload the unscanned pages in the ADF input tray If any pages are damaged do one of the following e Scan the damaged page from the scanner glass e Reprint the original document Prepare the stack as follows a Fan the stack of document pages to ensure that the pages do not stick together Fan the edge that will be pointing into the ADF in one direction and then fan that same edge in the opposite direction b Align the edges of the documents by tapping the bottom of the stack against the table top Rotate the stack 90 degrees and repeat 8 Resume scanning Automatic document feeder ADF does not feed paper e The ADF access door might not be securely latched Open the ADF access door and then close the door by pressing firmly e There might be a problem with the ADF hardware Use the following procedure to test the ADF o gt Disconnect the USB or Ethernet cable and the power cable from the scanner Check that the power cable is still connected to the power source o gt Ensure that the ADF has at least one piece of paper in the input tray o Reconnect the cables to the scanner and then turn on the scanner o gt Try to scan another
2. Use the following tools to manage and administer the device Scanner control panel LCD Manage Obtain information about the status of jobs that are being processed operating status of the scanner including error conditions select scan shortcuts initiate a scan or copy and set preferences for the behavior of the scanner Administer Use the Setup button to set the language and power mode access the HP Scanner Tools Utility and view and set network settings HP Scanning software Manage Use to scan pictures and documents access help and troubleshooting information access HP Scanning preview window to edit scans before saving them scan slides and negatives and modify scan settings and preferences such as assigning scan shortcuts to control panel buttons HP Copy software Manage Use to print copies on a printer HP Scanner Tools Utility Manage Assign scanning software to the Scan and Copy Uren buttons on the scanner control panel record maintenance information set or change the PIN code connect to a different scanner and check status of scanner network connection Embedded Web Server Manage Manage which computers have access to which scanners and obtain scanner status information Administer View status information change settings and manage the scanner from your computer See also e Scanner control panel on page 6 19 e HP Scanner Tools Utility on page 22 Embedded Web Serve
3. Scanner initialization or hardware problems 41 Chapter 5 Scanner has stopped working properly If the scanner stops scanning complete the following steps in order After each step start a scan to see if the scanner is working If the problem continues proceed with the next step A cable might be loose Ensure that the USB or Ethernet power and TMA ADF cables are securely connected Turn off the scanner wait 60 seconds and then turn on the scanner Restart your computer A software conflict might exist on your computer You might need to uninstall and then reinstall the HP scanning software 1 ga a b e Click Start click Settings and then click Control Panel in Windows XP and Vista click Start and then click Control Panel Click Add or Remove Programs in Windows Vista the Programs and Features tool and then select HP Scanjet N6350 Click Remove Click Add or Remove Programs in Windows Vista the Programs and Features tool and then select the HP Photosmart software Click Remove Reinstall using the HP Scanning Software CD that came with your scanner When you insert the CD an installation interface launches automatically Choose the software to install If the scanner still does not work see www hp com support or contact HP Customer Support Additional troubleshooting information If you have the HP scanning software installed you can use the onscreen Help to solve other problems
4. See also Change the scanner name on page 20 Change the scanner name To change the scanner name later complete these steps 1 In Windows Explorer click My Computer click Control Panel and then click Scanners and Cameras Right click the network scanner you want to rename and then select Rename Enter a new name for the network scanner NOTE This name change is reflected in your scan application and in the HP Scanner Tools Utility on this computer only The change is not reflected on all computers which have access to this network scanner 20 Configure and manage the scanner on a network Connect to additional network scanners To connect to additional scanners on the network complete these steps 1 Start the HP Scanner Tools Utility 2 Click the Network tab click Connect Scanner and then follow the onscreen instructions E NOTE If you do not see the scanner to which you want to connect make sure the scanner is not connected to a computer via the USB cable Install the scanner software on additional computers Before a computer can use the network scanner you must install the scanner software on that computer You are limited to three installations of the third party applications that shipped with your scanner To purchase additional licenses see www hp com search on your scanner model find the product overview page and then click the Specifications or Accessories tab NOTE This scanner
5. e An unexpected program opens when a button is pressed e Wrong shortcut is used when the Scan button is pressed Buttons do not work After each step press a button to see if it is working correctly If the problem persists proceed with the next step 1 A cable might be loose Ensure that the USB or Ethernet and power cables are securely connected 2 Turn off the scanner wait 30 seconds and then turn on the scanner 3 Restart your computer If the problem persists the buttons might be disabled Try the following procedure 1 Open Control Panel select Scanners and Cameras and then select your scanner model from the list 2 Display the scanner properties e Windows 2000 Click Properties e Windows XP and Vista Right click your scanner model and then click Properties 3 Examine the buttons setting for your scanner e Windows 2000 Ensure that the Disable Device Events option is not selected e Windows XP and Vista Ensure the Take No Action option is not selected An unexpected program opens when a button is pressed E NOTE The Scan Ss and Copy Le button settings can be changed in the HP Scanner Tools Utility and with the Button settings menu item in the HP Scanning dialog box You cannot change the settings for the Cancel Setup w Back or Power buttons Scanner button issues 45 Chapter 5 After each step press a button to see if it is working correctly If the problem persists proceed with
6. follow these steps 1 2 Load the originals lf your scanner LCD displays computer names a Use and F on the scanner control panel to select your computer and then press OK b If prompted enter your PIN and then press OK If the scanner LCD indicates there are no scan shortcuts on the scanner press the Scan 1 button The Scan To Setup dialog box displays on the computer screen Start a scan 15 Chapter 1 allowing you to transfer the scan shortcuts you want to use to the scanner control panel scan shortcuts list a Inthe Available Scan Shortcuts list select a shortcut and then click Add b Use the Move up and Move down arrows in the dialog box to arrange the shortcut sequence in the Front Panel List The shortcuts will appear in this order as you scroll through the list on the control panel of your scanning device c When the list is complete click Update the Device and then close the HP Scanning software For more information about uploading scan shortcuts see the printed Getting Started Guide Use s and to select the scan shortcut Press the Scan button on the scanner control panel The scanner sends the scan to the computer Tips on using the Scan button Before you use the Scan button for the first time you must select the shortcuts you want displayed in the scan shortcuts menu To cancel a scan press the Cancel button You can associate the Scan and Copy le butto
7. or Ethernet switch For additional Ethernet troubleshooting information see www hp com support select your country region and then use the search tool to find Ethernet or network troubleshooting topics The TMA ADF cable is connected between the scanner lid and the scanner base Ensure the cable is securely connected in the back of the scanner Uninstall and reinstall the software 38 An incomplete software installation could cause the scanner not to be recognized or the software not to launch correctly Try uninstalling and then reinstalling the HP scanning software To reinstall the HP scanning software you must have the HP Scanning Software CD To uninstall and reinstall the software follow these steps 1 Click Start click Settings and then click Control Panel in Windows XP and Vista click Start and then click Control Panel 2 Click Add or Remove Programs in Windows Vista the Programs and Features tool and then select HP Scanjet N6350 Troubleshooting 3 Click Remove Disconnect the USB or Ethernet cable 5 Reinstall the software using the HP Scanning Software CD that came with your scanner When you insert the CD an installation interface launches automatically Choose the software to install 6 Reconnect the USB or Ethernet cable when prompted to do so during the software installation S See also Check the cables on page 38 Problems installing third party applications that shipped w
8. 34 replace feed roller 35 replace separation pad 35 manage the scanner using Embedded Web Server 25 using HP Scanner Tools Utility 22 missing bottom of image 44 55 N negatives load 14 scanning tips 15 troubleshoot 51 Network menu 8 network settings 23 networking problems connecting to a wired network 52 O OCR troubleshoot 44 OK select button 6 order feed roller replacement 35 separation pad replacement 35 order maintenance supplies 35 P page orientation 28 pages out of order 48 troubleshoot 48 parts order 35 Power button 6 Power LED 37 Power Mode set 8 power supply troubleshoot cable 38 power on troubleshoot 43 product support 54 R remove blank pages 29 remove software 38 replace feed roller 35 replace separation pad 35 requirements Embedded Web Server 26 reset scanner 41 Restore Defaults 8 rotate pages 28 S scan files too large 44 from the HP scanning software 16 56 from WIA or TWAIN software 17 start 15 with one button press 29 Scan button scan from 15 troubleshoot 45 46 scan shortcuts troubleshoot 46 scanner automatic document feeder 7 control panel 6 features 5 hardware test 41 lamp troubleshoot 43 LEDs 37 panel buttons 6 reset 41 settings 7 transparent materials adapter 7 troubleshoot 42 troubleshooting 36 scanner glass clean 31 load original 12 scanner management and administration using Embedded Web Server 25 using HP Scanner Tools Utili
9. OK Enter the new subnet mask value and then press OK Enter the new Gateway value and then press OK At the Save changes prompt press OK ao 5 2 Restore the network defaults Use the Restore Network Defaults menu on the control panel LCD Network menu to restore network settings to their defaults E NOTE Restored default settings are automatically transmitted to the computers which access the scanner 1 From the Network Setup menu use to select Restore Network Defaults and then press OK 2 Press OK again to restore network defaults or press any other button to retain the current settings Embedded Web Server When the HP Scanjet N6350 scanner is connected to a network you can use the Embedded Web Server to view status information change settings and manage the scanner from your computer E NOTE Some Embedded Web Server options are only available to the network administrator and some settings might require a password You can use the Embedded Web Server without being connected to the Internet however some features will not be available This section contains the following topics e Embedded Web Server requirements e Start the Embedded Web Server e Embedded Web Server options Manage the network scanner 25 Chapter 2 Embedded Web Server requirements Your network environment must meet the following requirements to use the Embedded Web Server e A TCP IP based network e Microsoft Internet Explo
10. TMA light is on before you click Scan or Finish The bulb in the TMA light source might be broken or not working If the bulb is broken service is required The selection area might not be correct Make a selection area that only includes the image without borders The transparent materials adapter TMA does not work at all The cable might not be connected correctly Ensure that the TMA ADF cable is connected securely to the TMA port on the back of the scanner Slides negatives and TMA issues 51 Chapter 5 No light or only dim light is visible in the transparent materials adapter TMA after selecting a slides or negatives scanning shortcut After each step start a scan to see if the scanner is working If not proceed with the next step 1 Make sure that the TMA is connected to the scanner 2 The bulb in the TMA might not be working Press the Scan button and look for illumination If the bulb is broken service is required 3 The TMA might need to warm up Wait a few seconds to see if the light turns on For the best scanning quality let the TMA light warm up for at least 30 seconds Networking problems Use the following information to solve networking issues After correcting each set of items run the installation program again e General network troubleshooting e Check network status e Problems connecting to a wired network General network troubleshooting e If you are unable to install the device softwa
11. is still of poor quality clean the TMA See also e Clean the automatic document feeder ADF on page 32 e Clean the scanner glass on page 31 e Clean the transparent materials adapter TMA on page 32 Scanned images contain streaks or scratches When scanning with the automatic document feeder ADF follow the steps below After each step try another scan to see if the streaks or scratches are still apparent If so try the next step 1 Check that the originals are clean and unwrinkled 2 Clean the ADF or the scanner glass 3 Replace the separation pad and the feed roller See also e Clean the automatic document feeder ADF on page 32 e Clean the scanner glass on page 31 e Replace the feed roller and separation pad on page 35 Scanner scans only one side of a double sided page e Scan double sided pages through the automatic document feeder ADF e Inthe Advanced Document Settings for the scan shortcut select Scan Both Sides From Feeder Automatic document feeder ADF problems 47 Chapter 5 Scanned pages are out of order at the scan destination e Verify that the page order of the original document is correct before inserting into the automatic document feeder ADF e Make sure that there are no staples paper clips or any other attached material Such as adhesive notes that may cause the pages to feed incorrectly e Verify that pages are not stuck together See also Do
12. on the back of the scanner and that the power cord is plugged into a working electrical outlet e If you have connected the scanner to the computer through a USB hub or through a USB port on the front of the computer disconnect the scanner and then reconnect it to a USB port on the back of the computer e Make sure the scanner is not connected to both a computer with the USB cable and to a network with the Ethernet cable If the scanner is connected with both cables the USB connection disables the Ethernet network connection e If you have connected the scanner to a network disconnect the Ethernet cable from the network and connect it to a different network connection for example to a different port on a network router If this does not work reboot the router e Turn off the scanner wait 60 seconds and then turn on the scanner e Restart the computer If you continue to have problems it is possible that your HP scanning software firmware or associated drivers are out of date or have become corrupted See www hp com support to locate software firmware and driver updates for your scanner Troubleshooting See also e Care and maintenance on page 31 e Reset the scanner on page 41 e Check that the scanner has power on page 40 e Check the cables on page 38 e Check the USB or Ethernet connection on page 39 Scanner LEDs The scanner has two LEDs on the control panel that indicate scanner fun
13. so you should touch them only on their edges 14 Use the scanner 4 c Ifthe negative strip has fewer than three frames insert the negatives light shield into the negative strip holder making sure the edge of the light shield touches the last frame d Insert the negative strip holder back into the slide holder Close the scanner lid See also Start a scan on page 15 Slides negatives and TMA issues on page 51 Tips for scanning transparent items To scan non negative transparent items larger than those that the transparent materials adapter TMA accepts place the transparency on the scanner glass place a white sheet of paper on top of the tranparency select a scan shortcut that does not use the TMA and then scan When scanning a negative the default scan shortcut automatically enlarges the image to approximately 6 7 x 10 cm 2 64 x 4 in If you want the final image to be larger or smaller start the scan with the HP scanning software and then use the Resize tool in the HP Scanning preview window to set the scaling to the final size that you want The scanner will scan the item to the size that you select and adjust the scan resolution as appropriate For more information see the scanner software help Start a scan Start scanning in one of these ways Use the Scan button Use the HP scanning software Use other software programs Use the Scan button To scan using the Scan button on the scanner
14. then press OK E NOTE Setting Automatic to Off enables two additional network options Set Link Speed and IP Address See also e Set the link speed on page 24 e Change the IP address on page 24 Set the link speed Use the Set Link Speed menu on the control panel LCD Network menu to change link speed for the networked scanner 1 From the Network Setup menu use to select Set Link Speed and then press OK 2 Use to select the link speed Automatic default 10 Full 10 Half 100 Full 100 Half and then press OK Change the IP address Use the IP Address menu on the control panel LCD Network menu to change the IP address for the networked scanner E NOTE Changes to the IP address are automatically transmitted to the computers which access the scanner 24 Configure and manage the scanner on a network 1 From the Network Setup menu use to select IP Address and then press OK 2 Use to select the way you want to change the IP address e Select Automatic if you want the system to automatically change the IP address e Select Manual if you want to manually enter a new IP Address subnet mask or gateway 3 Press OK If you selected Automatic press OK again to confirm the IP address change If you selected Manual complete the following steps NOTE If you press OK without entering new values for any of the following the original values are retained Enter the new IP address and then press
15. GM sos Scsenhsese site sees dated Tea vigilantes Wak ata Menard c inked aaed Meee Mare Sidsdd be dena ddcuanisous 41 TeSEING SCaNnner hardware sc Goede iach a eee ee a ee Ea eani 41 Scanner has stopped working PrOperly cccecccseeccceecceeeeeeeeceseececeeceseeeeseeeeseeesseeeseeeeees 42 Additional troubleshooting information ccccccccccseceeceeeeeseeeeeeeeeeeeeaeeeeseeeeseeeeesaaeeesaaeees 42 Contents Scanner OPSratlOn PlODICMS steal ettae a E A 42 SGI TWIN TO UUM Obs ct ws ied a ed es ee SV ed 43 Scanner lamp Stays Ossanha a e e e 43 Scanner does not start scan right AWAY cccccseeccceececceeseessueeesseueessaucessueeesseeessaeeeesags 43 Scanner iS Scanning items very SIOWLY c cccccceececeeeeceeeeeeeeecee cess eesaeeeeeeeceseeeeseeeetseeees 43 Custom scan shortcut names do not display correctly on the LCD cccccseeeeeseeeeeeees 43 Vertical white stripes appear on the printed PagGe cccccecceeccseeceeeceeeseeeseeeeeeseeeeeeeeaeees 44 Call THlCS Ale 100 lage oaan end scale ari eee ede dead ee ete 44 The bottom of the image is cut off when scanning from the scanner glaSS 6c000 44 Issues with scanning documents or text OCR cccccceccceceeeeeseeeesaeeeeseeeeeeeeeeseeeeeseeeeeas 44 Scanner DUWONISSUCS sxc sect ve cae Senior che eanl E ea dae ais ica aO 45 BS UTOMS GO MOU WO MK assets ald a nti Sia eld a eich date al seen aad Saale Aes 45 An unexpected pr
16. HP Scanjet N6350 User Guide Contents 1 Use the scanner HP scanning software OV ChVIGW csecszsccs alsa cet itereareonanatetanl lidclswsae cetsn wis lenaweseansdnieesnteuateneiawiees an 4 Scanner OVEN VICW 52 splat once Goleta aie pied eat seu ead aslo g Scale landoy sera ed aN 5 Scanner control DANE 3 isnt nanty so vGects cen coneul su axbans iodsuseesha seta veeeesad eeuasesaede doseiiaewbeetasitaseacaate 6 Automatic document feeder ADF cccsecccceeeeccesececceeeceseuececceueeecseeeessseesseuseesseneeeseaes T Transparent materials adapter TMA cccccseseeeeceseeeeseeeeeeeeeeeeeeeeeeeeseesaseeeeseaeeeeeeseeeeeeeas 7 SCAMS Ts SOU S eraa di gata corn aad eae antntantaales shee E outset iacbled 7 Language Seisin N TE E kav onasmeamateieanes 8 POWO IWIOG Gao sees a E E A wadsemmenaadibenasaueaieas 8 TOO anna a A a it Ole nts oo 8 AS SUNT 6 1 oor a a R 8 Restore DCT AUIS Anaa n a N 8 LO ACMONIGIN al o easan E to ueheaedens mas soemiasae 9 Use the automatic document feeder ADF ccccsseccccseeeecceseecceeseceeeuseeseusesseuseeseeneesseaes 9 DOCUMENT IOAGING UDS T e AE a ar aS 9 HOw to load doc Umen En s a EEE A E eee 10 Use the scanner glass iainta naaa e A Taa AAR a eE AAA aea eraai auai 12 Use the transparent materials adapter TMA cccsccceeeeeeeeeeeeeeeeeeeeseeeeeseeseeseaeeeseeeeeeas 14 Load slides or MEGALINV CS cactitnicace ees aesicns vactisareasaacacus ces taivesanss Gantbe
17. LCD name with a numeral which you can then use to reference the shortcut Scanner operation problems 43 Chapter 5 Vertical white stripes appear on the printed page The destination printer might be out of toner or ink Print a non scanned item such as a file or scan the same original to a scan destination other than the printer If you still see the problem clean the automatic document feeder scanner glass or TMA if scanning slides or negatives See also Clean the automatic document feeder ADF on page 32 Clean the scanner glass on page 31 Clean the transparent materials adapter TMA on page 32 Scan files are too large If the saved scans have very large file sizes try the following Verify the scan resolution setting o 200 dpi is sufficient for storing documents as images o gt For most fonts 300 dpi is sufficient for using optical character recognition OCR to create editable text o For Asian fonts and small fonts 400 dpi is the recommended resolution Scanning at a higher resolution than necessary creates a larger file with no additional benefit Color scans create larger files than do black and white scans If you are scanning a large number of pages at one time consider scanning fewer pages at a time to create more smaller files The bottom of the image is cut off when scanning from the scanner glass Not all the length of the scanner glass is in the active imaging area When sca
18. Shortcut accept the default shortcut name or enter a new shortcut name and then click Save to save this as a new scan shortcut Automatically straighten scanned images Items fed through the automatic document feeder ADF or placed on the scanner glass may not be aligned with the scanner glass The software can automatically detect skewed items and correct for up to 20 degrees of skew in the output image To automatically straighten the scan output follow these steps 1 Double click the HP Scanning icon on the desktop select a document scan shortcut then select Scan Preferences on the Options menu On the Document tab of the Scan Preferences dialog box select Automatically straighten scanned images and then click OK Click Save Shortcut accept the default shortcut name or enter a new shortcut name and then click Save to save this as a new scan shortcut Filter out color from a document color channel dropout You can filter out a color channel red green or blue from a scan which might reduce the scan file size and improve optical character recognition OCR results To select a color channel to eliminate from a scanned image follow these steps 1 2 3 4 Double click the HP Scanning icon on the desktop and initiate a scan In the Final Images area select the thumbnail to adjust Under Output Type in the HP Scanning preview window select Black and White In the image toolbar select Adjust Black and W
19. Tools e Network e Restore Defaults NOTE You can change additional settings through the HP scanning software Double click the HP Scanning icon on the desktop select a scanner from the Device menu if you are connected to multiple scanners and then select an option from the Options menu For more information click Help in the HP Scanning shortcuts dialog box Scanner settings 7 Chapter 1 Language To select the language shown on the LCD follow these steps 1 Press the Setup 4 button use a and WF to select Language and then press OK 2 Use ah and until the language you want is selected press OK to confirm the language selection and then press OK to exit Power Mode Tools Network You can reduce the scanner s energy consumption with the following settings e Energy Savings Reduces energy consumption but increases the time it takes to begin a scan or copy e Instant Warm up Reduces the time it takes to begin a scan or copy but increases energy consumption To change energy consumption settings follow these steps 1 Press the Setup 4 button use ai and W to select Power Mode and then press OK 2 Use and until the setting you want is selected press OK and then press twice This menu option starts the HP Scanner Tools Utility on the connected computer This utility allows you to associate any button aware application with the Scan and Copy fm buttons monitor usage of certain s
20. and IP address e View network settings e Change network setup type e Set the link speed e Change the IP address e Restore the network defaults View network settings To view the network settings follow these steps 1 Press the Setup button use FF to select Network and then press OK 2 Use to select View Settings and then press OK 3 Use s and to scroll through the following network settings amp NOTE You cannot change network settings here You can change network settings using the Network Setup option on the Tools menu the HP Scanner Tools Utility or the Embedded Web Server e Status Connected or Disconnected e Serial Number e Automatic Status of automatic network setup On or Off e IP Address e Netmask Manage the network scanner 23 Chapter 2 e Gateway e Link Speed Automatic 10 Full 10 Half 100 Full 100 Half e Type DCHP or Static e Hostname See also 19 e HP Scanner Tools Utility on page 22 e Network settings on page 23 Embedded Web Server on page 25 Change network setup type Use the Network Setup menu on the control panel LCD Network menu to change the network setup type for the scanner Q TIP For example if you want to ensure that the IP address remains static set Automatic to Off and specify the IP address in the IP Address field 1 From the Network Setup menu use to select Automatic and then press OK 2 Use to select On or Off and
21. anner glass and the transparent materials adapter TMA A CAUTION Avoid placing items that have sharp edges paper clips staples wet glue correction fluid or other substances in the scanner Document pages should not be curled wrinkled or stuck together Clean the scanner glass Clean the scanner glass under the following conditions e Streaks scratches or spots appear in images e After scanning a document that is dusty or dirty e The environment is dusty To clean the scanner glass follow these steps 1 Turn off the scanner and then disconnect the USB or Ethernet cable and power cable from the scanner 2 Open the scanner lid 3 Clean the glass by using a soft lint free cloth that has been sprayed with a mild glass cleaner and dry the glass with a dry soft lint free cloth A CAUTION Use only glass cleaner to clean the scanner glass Avoid cleaners that contain abrasives acetone benzene and carbon tetrachloride all of which can damage the scanner glass Avoid isopropyl alcohol because it can leave streaks on the glass Do not spray the glass cleaner directly on the glass If you apply too much glass cleaner the cleaner might leak under the glass and damage the scanner 4 When you have finished reconnect the USB or Ethernet cable and power cable to the scanner Care and maintenance 31 Chapter 4 E NOTE Ifcleaning the top surface of the glass does not remove all dirt and smudges from the glass yo
22. bleshoot 38 useful scanning features 28 V vertical white stripes troubleshoot 44 view network settings 23 W warranty extended 54 Web sites order maintenance supplies 35 replacement parts 35 white scans troubleshoot 48 white stripes troubleshoot 44 WIA scan from 17 57 58
23. canner parts for maintenance purposes and access network options NOTE You can also start the HP Scanner Tools Utility by double clicking the HP Scanner Tools Utility icon on the desktop See also e HP Scanner Tools Utility scanner maintenance information on page 34 e Configure and manage the scanner on a network on page 19 The Network menu allows you to view and set network settings such as IP address and link speed See also Configure and manage the scanner on a network on page 19 Restore Defaults The Restore Defaults menu allows you to reset all hardware settings to their factory defaults 8 Use the scanner Load originals You can load your originals into your scanner using one of the following methods e Use the automatic document feeder ADF e Use the scanner glass e Use the transparent materials adapter TMA Use the automatic document feeder ADF For helpful information on loading your documents properly refer to the following topics e Document loading tips e How to load documents Document loading tips e The automatic document feeder ADF supports the following paper types Width 148 216 mm 5 8 8 5 in Length 148 356 mm 5 8 14 in Weight 50 120 g m 13 32 Ib e Scanning the following types of documents with the ADF might result in paper jams or damage to the documents To scan these documents use the scanner glass instead of the ADF Wrinkled or creased Curled documen
24. clear scanning strip on the scanner bed Wipe these items with a clean damp lint free cloth Clean the automatic document feeder ADF 33 Chapter 4 4 Open the ADF access door 1 and the roller cover 2 inside the ADF 6 Wait several minutes for the rollers to dry and then close the ADF roller cover and access door 7 Reconnect the USB or Ethernet cable and power cable to the scanner HP Scanner Tools Utility scanner maintenance information The Maintenance tab of the HP Scanner Tools Utility displays the scanner usage and maintenance history You can use this tab to record ADF feed roller and separation pad replacement The utility tracks the number of pages fed through the ADF since the last replacement and notifies you when you should replace the feed roller and separation pad To view the Maintenance tab follow these steps 1 On the Windows taskbar click Start point to Programs or All Programs point to HP point to Scanjet point to HP Scanjet N6350 and then click Scanner Tools Utility 2 Click the Maintenance tab on the HP Scanner Tools Utility dialog box Q TIP You can also start the HP Scanner Tools Utility from the scanner control panel Press the Setup button press F until Tools is highlighted and then press OK If prompted select your computer name and if required your PIN 34 Care and maintenance For detailed information on using the HP Scanner Tools Utility see the HP Scanner Tools U
25. ctions and error conditions The LED in the shape of an exclamation point is the Attention LED and the LED in the Power button is the Power LED The table below explains how to interpret the indicator LEDs Error condition Check the scanner LCD for The Attention LED H The Power LED is 2N error message quickly blinks amber lit with a steady green light Fatal error condition The scanner LCD a The Attention LED is lit O ine Power LED is indicates that you should turn off the with a steady amber lit with a steady green scanner then turn it on after 60 seconds light light The scanner is warming up or scanning an H The Power LED Original slowly blinks green The scanner is in Sleep mode The Power LED is lit with a steady dim amber light The scanner is on and ready to scan C The Power LED is lit with a steady green light Both LEDs are off There is no power to the scanner Scanner installation troubleshooting This section contains solutions for installation and setup problems e Check the cables e Uninstall and reinstall the software e Problems installing third party applications that shipped with the scanner Scanner installation troubleshooting 37 Chapter 5 Check the cables Cable type Power cable USB cable Ethernet cable TMA ADF cable Action The power cable is connected between the scanner and a power outlet e Ensure that the power cable is sec
26. cument loading tips on page 9 How to load documents on page 10 Scanned pages are missing at the scan destination When scanning with the automatic document feeder ADF pages that stick together are scanned as one item The hidden pages are not scanned To minimize the chance of pages sticking together fan the pages in a multipage document before placing the document in the ADF input tray The image is completely black or completely white Make sure pages are print side up in the automatic document feeder ADF When scanning from the scanner glass the item might not be placed correctly on the scanner glass Make sure that the item you are trying to scan is placed face down on the glass and the lid is closed See also Load originals on page 9 Scanned images are not straight When scanning with the automatic document feeder ADF make sure that the paper guides touch the edges of the original Make sure that all documents are of the same width When scanning from the scanner glass the item might have shifted when you closed the lid Straighten the original on the scanner glass and then scan again See also Automatically straighten scanned images on page 29 48 Troubleshooting Clear a jam from the automatic document feeder ADF To clear a jam from the ADF follow these steps 1 Remove any loose pages from the ADF input tray 2 Open the ADF access door 1 and the roller cover 2 inside the ADF
27. e Load originals e Start a scan e Make copies HP scanning software overview When you install the HP scanning software the following icons are added to your desktop These icons open programs for scanning copying and editing your scans HP Scanning is the program to use for scanning pictures and documents Use HP Scanning for all of the following Perform scanning functions Access help and troubleshooting information Access the HP Scanning preview window to edit your scans before saving them Scan slides and negatives with the transparent materials adapter TMA Modify settings and preferences such as assigning third party software through scan shortcuts to the Scan h button HP Copy is the program to use for printing copies on a printer HP Scanner Tools Utility is the program to use for recording maintenance information and performing some networking tasks In addition if you do not use HP Scanning HP Scanner Tools Utility allows you to configure the Scan F and Copy Uren buttons for third party software To start a scan double click the HP Scanning icon When the HP Scanning shortcuts dialog box is displayed select a scanner from the Device menu if you are connected to multiple scanners and then follow the onscreen instructions E NOTE You can modify scan settings in the HP Scanning shortcuts dialog box For more information click Help in the HP Scanning shortcuts dialog box To start a copy double click
28. eccesseeseseceneeeeeneeesseuseseueessueeesseeeensesessueeneags 51 Incorrect colors print or the image is too light or darkK nsnsnnnsnnsneneerrnnrrersrresrrrsrrrsrrrene 51 The scanned images are Gar steak sevens cecal bacssy tae ariva laaesaemepevicebuaitasietaticeEst caus tbecehdaatssoent 51 The transparent materials adapter TMA does not work at all 0 0anaanaannnnnnnnnennennennnni 51 No light or only dim light is visible in the transparent materials adapter TMA after selecting a slides or negatives SCANNING SNOPTtCUL cee cece ecceeeceeeeeeeeeeeseeeseeeeeeeaeesaees 52 Networking DFODIGING Aetia eraa E vitoveaisouyearvabedeseauencdatenselunusineveradonateaeturenntarmiaereys 52 General network trouDleSNooting ccccccccsseececceeeeeccceeeeecaueececseuseeeseuaseescaueeesseneeessaaees 52 CRECKINCIWOLK STIS arare Ne renin on cate oa ha senctas ccs atte s cokeene a tatiedec NTN 52 Problems connecting to a Wired NEtWOFK ccccececeeeceeeeeeeeeaeeeseeeeaeeeeaeeeeeeeseeesaeeesaeeesaeess 53 Additional troubleshooting information cccccceccceseeeeeeeeeeeseeeeeeeeeeeeeeeesseeeesseeesseeeesseeeeesaeees 53 6 PFOGUCT SUDDON noc ee eee ee 54 SECON EEEE A AIEA AEA EEA EA EAE EA IEE E AA EAE E E 55 1 Use the scanner The following topics describe the HP Scanjet scanner as well as how to scan or copy original documents HP scanning software overview Scanner overview e Scanner settings
29. eeeceseeceeececauscecauceseueeseneceseeeesaeeecaeeeseueeseuaescaeeenaeeesaes 24 Change the IPsaddrSs sc 4 ch ee eeidees Scere Ea iaaa E 24 Restore the network Gefaults ccccccssecccccseeeeceeeceeeceeececceseeesseeeeesseeseessegeeessegeeesnes 25 Embedded Web Sewer c c c0270Ski oe st ec ee ee 25 Embedded Web Server requirements cccccececeecccesceceeceseeeeseeeeseueeseeeeseesensesaaees 26 Start the Embedded Web Servet cccccccccccsseeecceeececcceseeccseueeecssauececseeeeeesseseeeessneeees 26 Embedded Web Server Options cccccccccseccceeceeceececeaeeeseececeeeeeseueesseueessueeessneessaaees 26 3 Useful scanning features WOWERN SCAIM SMONCUS cs ccesrccaticantend Reser a sQantsteidrubactruntat sited oxaweduh eea Ea RR 28 Automatically rotate landscape PaQes ccccsccccseeeeceeeeeeeeeeeeeeeeaaeeeseeeeseeeeeeeeeessaeeeseeeeseeenaes 28 Automatically remove blank Pages cccccccssscccesececssececeneecesecseeseeseececsuesessueessueesseseeeneeseneas 29 Automatically straighten scanned IMAGES cccceececeeeeeeeeeeeeeeeeeeeeeeeseeeesseeesseeeesaeesseeesseeeaes 29 Filter out color from a document color Channel GrOPOut cccseeceeeseeeeeeeeeeeeaeeeeeeaeeeeesaaeees 29 SCali WITMOUL PE VIC WING ususse iea i a tl lead a aea a 29 4 Care and maintenance Clean the Scanner GlaSs cic een ec ee ee ee 31 Clean the transparent materials adapter TMA ccccceeceeeeeeeeeeee
30. eeeeeeeesseeseesaeeeeseeeeesaeeeeeas 32 Clean the automatic document feeder ADF cccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesseeeeeseeeeesaeeeeeas 32 HP Scanner Tools Utility scanner maintenance inforMatiONn ccccceeeeecseeeeeeeeeeeeeaeeeeaeees 34 Replace the feed roller and Separation Pad ccccccccseccccsececseececeeececseeceseeseeseuseeseneessuseesanees 35 Order maintenance and scanner SUPHIICS cccceeeccceeeeecececeeececececeeceeseeeesueceseeeessueeessnees 35 5 Troubleshooting Basic troubleshooting tips ccccccecssecesesecceesecccsseceneseeessecesseececsusesseusessseesseeeseaeeessessensesess 36 scanne al We Bier eo ee ee ere 37 Scanner installation trOUDIESNOOTING ccccceeeeceeeeeeeeeeeeeeeeecaeeeeeeseeeeeesseeeeseaeeeeesaeaeeesseaeeeeeaas 37 Check ine canle Sree e er Oe ee eee ee eee ere 38 Uninstall and reinstall the SOPtWAME ccc ecccccecccceeeeceeeeceeececeeeeseeeeeaseeeeseueeseusessaneesaaees 38 Problems installing third party applications that shipped with the scannet 00 39 Scanner initialization or hardware ProbleMs cccccccccsecceccsececeeececeeceeseecesseeeesseeeetsneeetaeeees 39 Check the USB or Ethernet CONNECTION ccccccceecccceeeeceeeeceeeeeeeeeesaeeeeseueeeseeeesseesaneees 39 Check that the scanner NAS POWEL cccccseeccceececeececeeeceseeeeeseeeeseucesssesseeeeesaeeeseneessaees 40 Reset the SGANIN
31. ei button The copy is sent to the printer and the HP Copy dialog box displays on the connected computer If you want to change the settings such as number of copies or output type follow these steps a Click Cancel in the progress dialog box b Make the changes you want in the HP Copy dialog box c Click Start The copy is sent to the printer TIP You can also make copies by clicking the HP Copy icon on the desktop 18 Use the scanner 2 Configure and manage the scanner on a network This section is intended for the administrator or individual responsible for managing the network scanner You have the option to install the HP Scanjet N6350 on a network where it can be shared by up to 20 computers The following topics describe how to configure and manage your networked scanner Connect the scanner to a network Change the scanner name Connect to additional network scanners Install the scanner software on additional computers Manage the network scanner Connect the scanner to a network To connect the scanner to a host computer on an existing network complete the following steps 1 Press the Power button to turn off the scanner 2 Disconnect the USB cable from the scanner if it is connected 3 Connect the scanner to a router shown Ethernet jack or Ethernet switch using the Ethernet cable 4 Press the Power button to turn on the scanner Configure and manage the scanner on a network 19 Cha
32. en the scanner and the computer Ethernet connection Ensure that the Ethernet cable is securely connected between the scanner and a network router Ethernet jack or Ethernet switch If the problem persists after verifying the above items follow these steps 1 3 4 Do one of the following tasks depending on how the scanner is connected to the computer e If the USB cable is connected to a USB hub or a docking station for a laptop disconnect the USB cable from the USB hub or the docking station and then connect the USB cable to a USB port on the back of the computer e Ifthe USB cable is directly connected to the computer plug it into a different USB port on the back of the computer e Remove all other USB devices from the computer except for the keyboard and the mouse e Ifthe Ethernet cable is connected to a network router try connecting it to a different port on the router Press the Power button to turn off the scanner wait 30 seconds and then turn on the scanner Restart the computer When the computer is restarted try using the scanner If the scanner works and you changed the way it was connected to the computer in Step 1 the communication problem might involve the USB hub the docking station a USB port or another USB device Leave the scanner directly connected to the computer through a USB port on the back of the computer Try using the scanner after reconnecting each additional USB device and disconnec
33. ge missing 44 buttons scanner control panel 6 troubleshoot 45 C cables troubleshoot 38 Cancel button 6 Care Pack Services 54 CDs software install 21 change IP address 24 change network settings 23 clean ADF 32 scanner glass 31 TMA 32 clear jams ADF 49 color dropout 29 control panel scanner 6 copy 18 Copy button 7 18 crooked images troubleshoot 48 customer support 53 cut off images troubleshoot 50 D document feeder See ADF double sided scans troubleshoot 47 editable text troubleshoot 44 Embedded Web Server options 26 requirements 26 start 26 F features color dropout 29 page rotation 28 remove blank pages 29 scan shortcuts 28 scanner hardware 5 scanning 28 straighten scanned images 29 feed roller replace 35 film load 14 scanning tips 15 troubleshoot 51 fuzzy images troubleshoot 47 G glass clean 31 H hardware test 41 HP Care Pack Services 54 HP Copy start 4 HP Photosmart software install 21 HP Scanner Tools Utility Maintenance tab 34 HP scanning software about 4 scan from 16 uninstall 38 HP Scanning start 4 I image bottom cut off 44 indicator lights 37 install software troubleshoot 37 IP address 24 J jams ADF 49 L lamp scanner 43 language set 8 LCD scan shortcut names 43 LEDs 37 lights 37 lines troubleshoot 44 link speed 24 M maintenance clean ADF 32 clean scanner glass 31 clean TMA 32 HP Scanner Tools Utility Maintenance tab
34. hite select the color to drop out and then click Finish For more information on dropping out colors see the scanner software Help Scan without reviewing To scan with minimal user intervention always initiate a scan using the Scan button on the scanner control panel Scan without reviewing 29 Chapter 3 If you are shown a scan preview when you scan from the Scan button complete the following steps 1 Double click the HP Scanning icon on your desktop to start the HP Scanning software 2 On the HP Scanning shortcuts dialog box click the Options menu and then click Button Settings 3 Click the Front Panel Scan Button Settings tab clear the Show preview scan check box and then click OK 30 Useful scanning features 4 Care and maintenance This section presents information about how to care for and maintain the scanner e Clean the scanner glass e Clean the transparent materials adapter TMA e Clean the automatic document feeder ADF e HP Scanner Tools Utility scanner maintenance information e Replace the feed roller and separation pad e Order maintenance and scanner supplies Occasional cleaning of your scanner helps ensure higher quality scans The amount of care necessary depends upon several factors including the amount of use and the environment You should perform routine cleaning as necessary Routine cleaning and maintenance should include cleaning the automatic document feeder ADF the sc
35. ility to change these settings e Security e Asset Tracking e Language 26 Configure and manage the scanner on a network continued Tabs Description e Power Options e Device Services Networking Shows network status and allows you to change the network settings that have been configured for the device NOTE Network pages only appear if the device is connected to a network e Device Host Name e Wired 802 3 Interface e Advanced settings link settings IP address source e HTTPS Manage the network scanner 27 Useful scanning features Experienced document management professionals might be interested in the following scan features Many of these features are also available from any ISIS or TWAIN compliant document scanning software that allows you to modify the scan settings e Work with scan shortcuts e Automatically rotate landscape pages e Automatically remove blank pages e Automatically straighten scanned images e Filter out color from a document color channel dropout e Scan without reviewing Work with scan shortcuts Scan shortcuts provide a way to store a set of scan settings for tasks that you perform regularly You can create delete and modify scan shortcuts in the HP Scanning shortcuts dialog box If you are using HP Scanning you can assign third party software with a scan shortcut For information about using and managing scan shortcuts see the scanner software Help E NOTE You m
36. ing topics Scanned image is fuzzy Scanned images contain streaks or scratches Scanner scans only one side of a double sided page Scanned pages are out of order at the scan destination Scanned pages are missing at the scan destination The image is completely black or completely white Scanned images are not straight Clear a jam from the automatic document feeder ADF Automatic document feeder ADF does not feed paper The bottom of the scanned image is cut off 46 Troubleshooting See also How to load documents on page 10 e Care and maintenance on page 31 Scanned image is fuzzy When scanning with the automatic document feeder ADF follow these steps 1 Verify that the document original is not fuzzy 2 Check for any obstructions in the scanner paper path and make sure that the paper guides are positioned appropriately Try another scan 3 If the scanned image is still of poor quality clean the ADF When scanning from the scanner glass follow these steps 1 Verify that the document original is not fuzzy 2 Check to see that the item is in full contact with the scanner glass 3 If the scanned image is still of poor quality clean the scanner glass When scanning from the transparent materials adapter TMA follow these steps 1 Verify that the slide or negative is not damaged or dirty 2 Verify that the slide or negative is properly installed in the holder Try another scan 3 If the scanned image
37. ith the scanner You are limited to three installations of the third party applications that shipped with your scanner To purchase additional licenses see www hp com search on your scanner model find the product overview page and then click the Specifications or Accessories tab Scanner initialization or hardware problems If the scanner does not work after installation or if the scanner has stopped working correctly you might see a message on the computer screen that is similar to one of the following e The scanner could not be initialized e The scanner could not be found e An internal error has occurred e The computer cannot communicate with the scanner To fix the problem check the scanner cables and software as described in the following sections e Check the USB or Ethernet connection e Check that the scanner has power e Reset the scanner e Test the scanner hardware e Scanner has stopped working properly e Additional troubleshooting information Check the USB or Ethernet connection Check the physical connection to the scanner X TIP Ifusing a USB connection connect the scanner to the computer through a USB port on the back of the computer Scanner initialization or hardware problems 39 Chapter 5 Use the USB or Ethernet cable that was included with the scanner Another USB or Ethernet cable might not be compatible with the scanner USB connection Ensure that the USB cable is securely connected betwe
38. ndonsesceediavocaseaesaeauncaves 14 Tips for scanning transparent ItOMS ccccccccecceceececeeeeseceseeceseeeeseeeeeasesseeeseeeesseees 15 Stara i 67 9 ee a eee ea ae eee eRe 15 WSC TAGS Calm DUNO stead neat ae ts le Ae adel ci allan oD tua cal ad tie hoe tees G 15 TipS om using the Scan DUON nianie eee eee a oe oe 16 Use the HP SCanning SORWANG siirinsesi a aa 16 Use other software program Sasasa aa ee eeeew Se ein ek etn ee eee eee 17 DOA GNC ICS cos stearate testes sts eee he Matec nasuseie a ate eines ea te ect tees 18 2 Configure and manage the scanner on a network Connect the scanner to a NetWork eiar ee nce coc talanc a EO E 19 Change the SCanner Nalin mscien isos eee ee a a ee ee Ea 20 Connect to additional Network SCANNETS ccccccseeeeeeceeeeeeeseeeeeseeeeeesseeeeeeseeeeeesaeeeesaaeeeeeaas 21 Install the scanner software on additional COMPUTES cccceececeececeeeeeceeeeeeaeeeeseeeeeseeeeeaes 21 Manage Ine hetwork SCANNER eresse e a E E OR EEE TA aaa 22 Management and administration tOols cccccccccseeeeceeeeeeeeeeeseeeeseeeeeeeeeeeseeeeseeeesaneeesaaees 22 FIP SCanrier TOOS CUI nana a E E aauheeatence 22 ING EW ORI SeN S aini Ea A 23 View network CUI Serta ete ripe scart cine pea etaaeetyaae ese ana tuetesmnlin ie canlandlag aa tundacuaigua on Adtbudegon 23 Change network setup ly De ixiccxcos rene i ees ee eee dee a eae 24 Set the link SPEO cece cesecece
39. nner Q TIP To scan multiple pictures at the same time arrange the pictures that you want to scan on the scanner glass with at least 6 mm 0 25 in of space between items See also Start a scan on page 15 Load originals 13 Chapter 1 Use the transparent materials adapter TMA This section contains information about using the transparent materials adapter TMA to scan slides including 35 mm slides and negatives e Load slides or negatives e Tips for scanning transparent items NOTE You must use the HP scanning software to scan slides and negative frames using the TMA Load slides or negatives The transparent materials adapter TMA enables you to scan two 35 mm slides or three negative frames at one time Figure 1 1 Load slides 1 To load slides or negatives in the TMA follow these steps 1 Open the scanner lid 2 Remove the negative strip holder from the slide holder 3 Do one of the following to load the slides or negatives e If you are scanning slides place the slides into the slide holder Insert the slides with the top of the slides pointing up and with the front of the slides facing you making sure that the slides are flat and do not overlap e If you are scanning negatives do the following a Remove the light shield from the negative strip holder b Slide a negative strip into the negative strip holder so that the shiny side of the negative faces you Negatives are easily damaged
40. nning from the scanner glass make sure to position your originals as indicated by the reference mark on the edge of the scanner glass Issues with scanning documents or text OCR 44 The scanner uses optical character recognition OCR to convert text on a page to text that you can edit on your computer If you scan text but cannot edit it make sure that you make the following selections during scanning o gt From the HP scanning software select Document o gt On the HP Scanning shortcuts dialog box select a word processing program or Save to File from the Scan to Setup dialog box NOTE If you select Save to File select a text file type from the File Type drop down list Scanned text might not appear on your computer exactly as it appeared on the original especially if the original contains faint or smudged text For example some characters might be incorrect or missing As you edit the text compare the scanned text against the original and then make corrections as necessary Troubleshooting e To change text scanning options click Change Settings in the HP Scanning shortcuts dialog box e The OCR software is installed by default when you install the HP scanning software during scanner setup If you use the Custom option when installing the software you can choose not to install the OCR software Try reinstalling the software using the default install options Scanner button issues e Buttons do not work
41. ns with any button aware scanning software For more information see the printed Getting Started Guide If you want to preview and edit your scan before sending it double click the HP Scanning icon on the desktop click Change Settings and select Show a preview scan You can also set the Scan button to show a preview before sending the scan For more information see the scanner software help If you are scanning 35 mm slides or negatives select a scan shortcut for slides or negatives If you do not the transparent materials adapter light does not turn on If you want to create a custom scan shortcut double click the HP Scanning icon on your computer In the HP Scanning shortcuts dialog box highlight the scan shortcut that is most like the one you want to create and then click Change Settings Modify the settings and then save the scan shortcut For more information see the scanner software help You can also specify a scan shortcut as the default so that you do not need to select it from the list each time See also Load originals on page 9 Use the HP scanning software on page 16 Use other software programs on page 17 Use the HP scanning software Start the scan from the HP scanning software when you want more control during the scanning process such as when you want to preview the image before the final scan use more advanced features or change scan settings To scan using the HP scanning software foll
42. nt if it has a menu option such as Acquire Scan Import New Object or Insert If you are unsure whether the program is compliant or what the option is see the documentation for that program To scan using WIA or TWAIN compliant scanning software follow these steps 1 2 3 Start the scanning software and then select the WIA or TWAIN data source Complete the appropriate actions to complete the scan Select the settings that are appropriate for the originals that you are scanning For more information see the online help for the scanning software E NOTE If your application is ISIS compliant or you want streamlined document scanning when using TWAIN compliant software programs you can install the EMC ISIS TWAIN driver To do so insert the installation CD that came with your scanner and select the EMC ISIS TWAIN option When scanning documents select the HP Scanjet N6350 Doc TWAIN driver from the application However when scanning images from other software programs select the HP Scanjet N6350 TWAIN driver See also Load originals on page 9 Start a scan 17 Chapter 1 Make copies Use the Copy l button to scan an original and send it to a printer To make copies follow these steps 1 2 Load the originals If your scanner is networked a Use z and F on the scanner control panel to select your computer and then press OK b If prompted enter your PIN and then press OK Press the Copy l
43. ogram opens when a button IS PreSSed ccccceseeeseeeeeeseeeeeeeneeeaees 45 Wrong shortcut is used when the Scan button is PreSSed cccceeccceeeeceeeeeeeeseeeseeeeeaes 46 Automatic document feeder ADF problems cccccseeeeseeeeeeeeeeeceeeeeeeeeeeeaeeeeesaeeeeeseeeesaeees 46 Scanned MAGS IS TUZ y ase 06 8 i abetciaes te A E celine auaee E Acces 47 Scanned images contain streaks or SCratCNeS ccccccecccseececeececeeeeeeeeeseeeseeeeeeeeesaneeees 47 Scanner scans only one side of a double sided Page ccccccseeeeeeeeeeeeeeeeeeeeeeeeaeeeeesaees 47 Scanned pages are out of order at the scan CeStination cccccccecccceececeeeeeeeeeeeeeeeeeeees 48 Scanned pages are missing at the scan CeStination cccccccsececeececeeeeeeeeeeeeeseeeeeseees 48 The image is completely black or completely White ccccceececeeeeeeeeeeeeeeeeeseeeeseeeseeeees 48 Scanned images are not SWalgnt iii acetic ae ac ne ac aaa nice aie ei aca 48 Clear a jam from the automatic document feeder ADF ccccccseeeeeeeeeeeeseeeeesaeeeeesaees 49 Automatic document feeder ADF does not feed Papel ccccceccccecceeeeeceeeeseeeeeseeeaes 50 The bottom of the scanned image iS cut Off cc eccecccseeeeeseeeeeeeeeeeeeeseeeeeeesaeeesaaeeeeesaaeeees 50 Slides negatives and TMA iSSues lt 2 lt c2 c2en e eee tee eee 51 The image cannot be enlarged cccccccesccces
44. oll through and select options in the LCD Press i and WF to scroll through the menu options Press OK to select the option Cancels a scan or copy in progress Cancels menus on the LCD Starts a scan Turns the scanner on and off Allows you to enter network address information and PIN when your scanner is networked Allows you to set preferences for the behavior of the scanner and enter network connection specifications Displays the previous menu on the LCD continued m Description Starts a copy displaying the HP Copy dialog box on the computer See also e Start a scan on page 15 e Make copies on page 18 Scanner settings on page 7 e Scanner LEDs on page 37 Configure and manage the scanner on a network on page 19 Automatic document feeder ADF You can use the automatic document feeder ADF to scan single pages or multipage documents quickly and easily See also e Use the automatic document feeder ADF on page 9 e Start a scan on page 15 e Make copies on page 18 Transparent materials adapter TMA You can use the transparent materials adapter TMA to scan 35 mm slides or negatives See also e Use the transparent materials adapter TMA on page 14 e Start a scan on page 15 Scanner settings The Setup button allows you to modify the following scanner settings e Language e Power Mode e
45. ow these steps 1 Load the originals 2 Double click the HP Scanning icon 16 Use the scanner 3 If your computer is networked to multiple HP N6350 scanners select the scanner you want to use from the Device menu and then click OK 4 Inthe HP Scanning shortcuts dialog box a Select the scan shortcut you want to use b If you want to change scan settings or show a preview before you scan click Change Settings and make the changes you want For more information see the scanner software help c Click Scan 5 Ifyou chose to show a preview the HP Scanning preview window is displayed Make the changes you want When you are done click Finish For more information see the scanner software help NOTE If you did not select Show a preview you might be prompted to scan additional documents Click Yes to scan additional documents or click No to send the scanned image s to the specified location When you click Finish the HP scanning software sends the scanned page s to the specified location KIA TIP The HP Scanning shortcuts dialog box continues to display after you scan so that you can scan additional originals When you are done scanning click Close See also Load originals on page 9 Useful scanning features on page 28 Use other software programs You can scan an image or document directly into a software program if the program is WIA or TWAIN compliant Generally the program is complia
46. page through the ADF The bottom of the scanned image is cut off By default the scanner can scan paper that is up to 356 mm 14 in long For longer pages the end of the document is not included in the scanned image 50 Troubleshooting Verify that you have specified an appropriate page size in the scanning software Slides negatives and TMA issues Use this section to help resolve issues with 35 mm slides or 35 mm negatives that have been scanned by using the TMA The image cannot be enlarged Incorrect colors print or the image is too light or dark The scanned images are dark The transparent materials adapter TMA does not work at all No light or only dim light is visible in the transparent materials adapter TMA after selecting a slides or negatives scanning shortcut The image cannot be enlarged Use Resize to change the size of the final scanned image For more information go to the Index tab in the onscreen help Type resize in the keyword field and click scanned images Incorrect colors print or the image is too light or dark The software might be setting the exposure for the entire area instead of for one slide or negative Select and drag the handles around the selection area until you see the image area you want to scan Verify that you are using a scan shortcut appropriate for the transparent media type slides or negatives The scanned images are dark Check to see if the transparent materials adapter
47. pter 2 5 If there is more than one HP Scanjet N6350 scanner on the network locate the serial number and IP address of the scanner to which you want to connect a Press the Setup button on the scanner control panel use F to select Network and then press OK Use to select View Settings and then press OK c Use to scroll to the serial number and IP address settings then press OK to view the information without scrolling 6 Complete the network connection If you have already installed the HP scanning software complete these steps a Start the HP Scanner Tools Utility b Click the Network tab click Connect Scanner and then follow the onscreen instructions If you have not installed the HP scanning software insert the scanning software CD into the CD drive and complete the network connection a When you see the Found Network Scanner dialog box select the scanner you are installing and then click Next b Onthe Computer Name dialog box enter the computer name to be listed on the scanner control panel and then click Next c On the Adding Device dialog box click Next when the status bar indicates that the new device has been added amp NOTE This scanner supports a maximum of 20 network users If there are already 20 network users you will see a Computer List Full dialog box If you have scanner administrator privileges you can remove a computer from the list and continue with the network installation
48. r on page 25 HP Scanner Tools Utility You can use the HP Scanner Tools Utility to e Connect to a different scanner on the network e Assign or reset your PIN code 22 Configure and manage the scanner on a network e Check the status of the network or the connection to an individual scanner e Disconnect from a networked scanner and remove your computer from the scanner s list of computers For information on completing these tasks see the HP Scanner Tools Utility Help system To start the HP Scanner Tools Utility and access the network functions complete these steps 1 Press the Setup 4 button 2 Press until Tools is highlighted press OK to start the HP Scanner Tools Utility on your computer and then click the Network tab on the Scanner Tools Utility dialog box which is displayed on your computer X TIP You can also start the HP Scanner Tools Utility through the Windows taskbar or from the HP Scanner Tools Utility icon on the desktop From the Windows taskbar Click Start point to Programs or All Programs point to HP point to Scanjet point to HP Scanjet N6350 and then click Scanner Tools Utility From the HP Scanner Tools Utility icon on the desktop 1 Double click the HP Scanner Tools Utility icon 2 If prompted highlight the HP Scanjet N6350 scanner you want and then click OK Network settings Use the Network menu on the scanner control panel LCD to view and set network settings such as link speed
49. ray extender 10 Use the scanner 2 Fan the stack of document pages to ensure that the pages do not stick together Fan the edge that will be pointing into the ADF in one direction and then fan that same edge in the opposite direction 3 Align the edges of the documents by tapping the bottom of the stack against the table top Rotate the stack 90 degrees and repeat Load originals 11 Chapter 1 5 Adjust the paper guides to the width of the documents Take care not to overtighten the guides which can restrict paper feeding but make sure that the paper guides touch the edges of the documents 6 Gently push the stack forward to activate the tray sensor See also e Document loading tips on page 9 e Automatic document feeder ADF problems on page 46 e Start scan on page 15 Use the scanner glass Place items that do not meet the specifications for the automatic document feeder ADF directly onto the scanner glass Minimum size No minimum size Maximum size 216 x 300 mm 8 5 x 11 8 in E NOTE Notall the length of the scanner glass is in the active imaging area so make sure to position your originals as indicated by the reference mark on the edge of the scanner glass Place the original face down on the scanner glass as indicated by the reference mark For landscape pages place the pages face down with the top of the page pointing toward the back of the scanner n 12 Use the sca
50. rchase maintenance parts online at the scanner support website at www hp com buy parts or from your local HP dealer Order maintenance and scanner supplies 35 Troubleshooting This section contains solutions for common problems with the scanner automatic document feeder ADF and transparent materials adapter TMA e Basic troubleshooting tips e Scanner LEDs e Scanner installation troubleshooting e Scanner initialization or hardware problems e Scanner operation problems e Scanner button issues e Automatic document feeder ADF problems e Slides negatives and TMA issues e Networking problems e Additional troubleshooting information For additional troubleshooting see the online help for the scanning software that you are using or see www hp com support for updated information about the scanner Basic troubleshooting tips 36 Simple issues such as smudges on the scanner glass or loose cables can cause your scanner to produce fuzzy scans operate in an unexpected manner or fail to operate Always check the following items when you encounter scanning problems e If scans are fuzzy check to see if the scanner glass or TMA is dirty or smudged If so clean the glass or TMA e If you are scanning a document using an OCR shortcut make sure that the original document is clear and crisp enough to be scanned e Make sure that the TMA ADF USB or Ethernet and power cables are firmly seated in their respective connectors
51. re verify that o gt All cable connections to the computer and the device are secure o The network is operational and the network router is turned on o gt All applications including virus protection programs spyware protection programs and firewalls are closed or disabled for computers running Windows o Make sure the device is installed on the same subnet as the computers that will be using the device e Make sure you are connecting to the correct scanner o Verify the scanner serial number Press the Setup 4 button use to select Network press OK use to select View Settings press OK and then use F to scroll down to Serial Number Start the HP Scanner Tools Utility o Click the Network tab click Connect Scanner and then follow the onscreen instructions make sure to select the scanner whose serial number matches the serial number you verified See also View network settings on page 23 Change the IP address on page 24 Check network status If you are not able to scan to a network scanner check the network status using the HP Scanner Tools Utility 1 Double click the HP Scanner Tools Utility icon on your desktop 2 If prompted highlight the HP Scanjet N6350 scanner you want and then click OK 52 Troubleshooting 3 Click the Network tab 4 Click the Check Status button Problems connecting to a wired network e Ifthe Link light on the network connector does not turn on make su
52. re you have completed the items listed under Basic troubleshooting tips in this chapter e Though it is not recommended that you assign the device with a static IP address you might resolve some installation problems such as a conflict with a personal firewall by doing so See also Basic troubleshooting tips on page 36 Change network setup type on page 24 Additional troubleshooting information For additional troubleshooting information see the following resources To look for updated information about the scanner see www hp com support Select your country region and then select your language o gt Enter the scanner model number and then press Enter e If you do not have Internet access see the information about getting assistance in the printed Getting Started Guide for information on contacting HP support Additional troubleshooting information 53 6 54 Product support In order to get the best results from your HP product please consult the following HP support offerings 1 See the product documentation that came with the product e Review the troubleshooting section in this user guide e Review the scanner software help click Start point to Programs or All Programs point to HP point to Scanjet point to N6350 point to User Guide and then select your preferred format 2 See the HP online support website at www hp com support or contact your point of purchase HP online support is a
53. rer 5 0 or higher or Mozilla Firefox 2 0 or higher installed on the host computer e An Ethernet connection e AnInternet connection is required to access support from the Embedded Web Server e Your computer must be on the same subnet as the HP Scanjet N6350 to be able to discover connect to and scan from the device NOTE You can use the Embedded Web Server to manage the HP Scanjet N6350 from any computer on the network as long as you can access the IP address of the device from that computer Start the Embedded Web Server In a supported web browser on your computer type the IP address that has been assigned to the HP Scanjet N6350 and then press Enter X TIP The device IP address might not be static depending on your environment Use the View Settings display on the control panel LCD Network menu to find the IP address for the device After opening the Embedded Web Server you can bookmark it so that you can return to it quickly in the future See also e View network settings on page 23 19 e Embedded Web Server options on page 26 Embedded Web Server options The Embedded Web Server contains tabs that you click use to view product information and change device settings Tabs Description Information Shows the following information about the device e Device information e Network information e Status e Usage Settings Shows the settings that have been configured for the device and gives you the ab
54. supports a maximum of 20 network users If there are already 20 network users you will see a Computer List Full dialog box If you have scanner administrator privileges you can remove a computer from the list and continue with the network installation 1 Decide what software to install e If you will be using the scanner with document management or scanning software that you already own you only need to install the HP Scanjet drivers and Scanner Tools Utility e If you do not already have document management and scanning software you can use the HP scanning software that shipped with the scanner Read the onscreen descriptions of the software during the installation to decide what software to install 2 Insert the HP Scanning Software CD that came with the scanner into the computer CD drive Wait for the installation dialog box to appear and then follow the onscreen instructions X TIP Once the software has been installed you can connect to additional scanners on the network using the HP Scanner Tools Utility See also Connect to additional network scanners on page 21 Install the scanner software on additional computers 21 Chapter 2 Manage the network scanner This section is intended for the administrator or individual responsible for managing the network scanner e Management and administration tools e HP Scanner Tools Utility e Network settings e Embedded Web Server Management and administration tools
55. t any USB devices that prevent the scanner from working correctly If the scanner does not work uninstall and then reinstall the HP scanning software See also Uninstall and reinstall the software on page 38 Check that the scanner has power The power cable is connected between the scanner and a power outlet Ensure that the power cable is securely connected between the scanner and a live electrical outlet If the power cable is connected to a surge protector ensure that the surge protector is plugged into an outlet and turned on Ensure that the Power button on the scanner panel is on when on and no error or attention conditions exist the Power LED is lit with a steady green light 40 Troubleshooting If the problem persists after verifying the above items follow these steps 1 Press the Power button to turn off the scanner and then disconnect the power cable from the scanner 2 Wait 30 seconds 3 Reconnect the power cable to the scanner then turn on the scanner After 30 seconds the Power LED is lit with a steady green light and the Attention LED is Off See also e Basic troubleshooting tips on page 36 Scanner LEDs on page 37 e Check the cables on page 38 Reset the scanner If you receive an error message similar to Scanner initialization failed or Scanner not found when trying to use the scanner you should reset the scanner To reset the scanner follow these steps 1 Close
56. the HP Copy icon and follow the onscreen instructions E NOTE You can assign the Scan or Copy l buttons to other applications as long as Windows recognizes the application as button aware To do so use the HP Scanner Tools Utility 4 Use the scanner See also e Load originals on page 9 e Use the HP scanning software on page 16 e Make copies on page 18 Scanner overview Scanner control panel Automatic document feeder ADF ADF input tray ADF output tray Transparent materials adapter TMA Power supply input TMA ADF cable input USB cable port Ethernet reset port gt 0O OIN I OO oO BI ws n gt O Ethernet port See also e Scanner control panel e Automatic document feeder ADF e Transparent materials adapter TMA Scanner overview Chapter 1 Scanner control panel Use the buttons on the scanner control panel to start a scan and to configure some scanner settings HP Scanjet M6350 F pa 1 imi icon ll oa ve 6 Use the scanner Button name Attention LED LCD OK Select Cancel Keypad Description In combination with the Power LED indicates scanner functions and error conditions Displays available scan shortcuts that users can select Shows menu options and status and error messages If the scanner is networked displays computers networked to the scanner Allows you to scr
57. the HP scanning software if it is open 2 Disconnect the USB or Ethernet cable from the scanner 3 Turn the computer off wait 60 seconds and then turn on the computer 4 Reconnect the USB or Ethernet cable If you are using a USB connection complete these steps a Make sure that the USB cable is connected to the back of the scanner correctly The trident icon on the USB cable faces up when the cable is properly connected to the scanner b Try connecting the USB cable to a different USB port on the back of the computer 5 Ensure that the TMA ADF cable is securely connected Test the scanner hardware If you think that the scanner has a hardware problem verify that the cables are firmly connected to the scanner the computer and the power source If the cables are correctly connected verify that the scanner is turned on To test the scanner hardware follow these steps 1 Disconnect the USB or Ethernet power and TMA ADF cables from the scanner 2 Reconnect the USB or Ethernet power and TMA ADF cables to the scanner When you turn on the scanner the carriage will move forward and backward approximately 25 mm 1 inch and the lamp will turn on If the carriage does not move and the scanner lamp does not turn on a problem might exist with the scanner hardware See also e Scanner has stopped working properly on page 42 e Check the cables on page 38 Check the USB or Ethernet connection on page 39
58. the next step 1 On the Buttons tab of the HP Scanner Tools Utility determine the associations for the Scanner Front Panel Buttons If necessary change the software that is assigned to a button Verify that the expected program is installed on the computer by looking at the Start menu If necessary install the program If the problem persists the buttons might be assigned outside of the HP Scanner Tools Utility Try the following procedure 1 Open Control Panel select Scanners and Cameras and then select your scanner model from the list Display the scanner properties e Windows 2000 Click Properties e Windows XP and Vista Right click your scanner model and then click Properties Ensure that the Start this program option is selected and that the correct application is selected in the drop down list Wrong shortcut is used when the Scan button is pressed If you are using the HP scanning software you can change the scan shortcut assigned to the Scan button See the scanner software Help for information on assigning scan shortcuts to the Scan a button Automatic document feeder ADF problems Use this section to help resolve issues that might occur when scanning from the automatic document feeder ADF Paper jams usually result from inappropriate paper being fed into the ADF Review the tips for using the ADF If misfeeds occur frequently perform ADF maintenance This section contains the follow
59. tility help Replace the feed roller and separation pad Replace the feed roller and separation pad under either of the following conditions e Streaks on scans or paper jams occur repeatedly and cleaning the automatic document feeder does not help e The HP Scanner Tools Utility Maintenance tab indicates that maintenance is due The feed roller replacement kit contains a feed roller separation pad and installation instructions To order replacement kits go to www hp com support To replace the feed roller and separation pad follow these steps 1 Turn off the scanner and then disconnect the USB or Ethernet cable and power cable from the scanner 2 Open the ADF access door and roller cover and then replace the feed roller and separation pad as described in the installation instructions that were included with the replacement kit 3 Close the roller cover and ADF access door and then reconnect the USB or Ethernet cable and power cable to the scanner 4 Turn on the scanner and then update the scanner maintenance history a Press the Setup button on the scanner control panel to open the HP Scanner Tools Utility If prompted select your computer name and if required your PIN Click the Maintenance tab b In the Feed Roller and Separation Pad Maintenance area click Record Replacement and then click Yes For more information see the HP Scanner Tools Utility help Order maintenance and scanner supplies You can pu
60. ts documents Torn documents Documents with paper clips or staples Carbon paper Coated paper Extremely thin Paper with adhesive lt gt translucent paper notes or flags attached Photos _ Q Y Overhead transparencies Paper with wet substances such as glue or correction fluid Papers that are stuck EO together e Before loading documents make sure that the ADF access door is securely latched Load originals 9 Chapter 1 When loading a stack of documents make sure that all of the documents are the same width When loading pages in landscape orientation make sure that the top of the pages point toward the back of the scanner Doing so ensures that the scanner automatically rotates the page correctly if you have set the HP scanning software to rotate landscape pages automatically The maximum capacity of the ADF is 50 sheets of 75 g m 20 Ib paper When using heavier paper the maximum capacity is decreased When loading small pages such as A5 paper size 148 x 210 mm or 5 8 x 8 3 in load a stack of at least five pages to ensure that the ADF properly detects and feeds the stack When scanning fewer than five small pages scan the pages by placing them on the scanner glass When loading long documents that hang over the end of the input tray pull out the input tray extender 1 and then load the documents 2 How to load documents If the original pages are long pull out the input t
61. ty 22 using the Network menu 23 Scanner Tools Utility 22 scanning features 28 separation pad replace 35 set language 8 Power Mode 8 set link speed 24 Setup button 6 shortcuts 28 slides load 14 scanning tips 15 troubleshoot 51 software scan from 17 troubleshoot installation 37 uninstall 38 solving problems 36 speed troubleshoot 43 status lights 37 straighten scanned images 29 streaks troubleshoot 47 stripes troubleshoot 44 supplies maintenance 35 support 53 54 T technical support 53 test scanner hardware 41 text editable troubleshoot 44 TMA clean 32 load 14 scanning tips 15 troubleshoot 51 TMA ADF cable troubleshoot 38 transparent materials adapter TMA clean 32 load 14 troubleshoot 51 troubleshoot ADF 46 ADF feeding 50 basic tips 36 black scans 48 bottom cut off 44 buttons 45 cables 38 check power 40 crooked images 48 custom scan shortcut names 43 cut off images 50 double sided scans 47 Ethernet connection 39 fuzzy images 47 installation 37 lamp stays on 43 large scan files 44 LCD 43 LEDs 37 negatives 51 networking 52 page order 48 pages missing 48 power 43 reset scanner 41 Index Scan button 45 46 scan shortcut names 43 scanner 42 scanner glass 44 slides 51 speed 43 streaks 47 test scanner hardware 41 TMA 51 USB connection 39 white lines 44 white scans 48 troubleshooting 36 turn on troubleshoot 43 TWAIN scan from 17 U uninstall software 38 USB cable trou
62. u can also clean the underside of the glass Cleaning the underside of the glass requires that you disassemble the scanner For instructions on how to clean the underside of the scanner glass see www hp com support Clean the transparent materials adapter TMA Clean the TMA with a dry soft cloth If necessary lightly spray the cloth with glass cleaner and wipe the TMA Clean the automatic document feeder ADF The automatic document feeder ADF requires periodic maintenance depending on the amount of use and the type of paper that is fed through it Clean the ADF under the following conditions 32 The ADF rollers are visibly dirty The ADF has trouble feeding documents Vertical streaks appear in images scanned by the ADF After scanning a document that is dusty dirty or has pencil writing on it through the ADF The environment is dusty If you use the ADF several times per week monthly cleaning is recommended Set up a cleaning routine that is appropriate for the scanner E NOTE If cleaning the automatic document feeder does not improve performance you might need to replace the feed roller To order a Roller Replacement Kit see www hp com buy parts Care and maintenance To clean the ADF follow these steps 1 Turn off the scanner and then disconnect the USB or Ethernet cable and power cable from the scanner 2 Open the scanner lid 3 Clean the white strip on the inside of the scanner cover and the
63. urely connected between the scanner and a live electrical outlet or surge protector e Ifthe power cable is connected to a surge protector ensure that the surge protector is plugged into an outlet and turned on e Turn off the scanner power switch and turn off the computer After 60 seconds turn the scanner back on and then turn on the computer in that order The USB cable is connected between the scanner and the computer e Ifthe scanner is on a network make sure that the scanner is not also connected to a computer with the USB cable e Use the cable that was included with the scanner Another USB cable might not be compatible with the scanner e Ensure that the USB cable is securely connected between the scanner and the computer e Ifthe USB cable is connected to a USB port on the front of the computer move it to a USB port on the back of the computer For additional USB troubleshooting information see www hp com support select your country region and then use the search tool to find USB troubleshooting topics If your scanner is on a network the Ethernet cable is connected between the scanner and the network e Make sure the scanner is not also connected to a computer with the USB cable e Use the Ethernet cable that was included with the scanner Another Ethernet cable might not be compatible with the scanner e Ensure that the Ethernet cable is securely connected between the scanner and a network router Ethernet jack
64. ust upload your scan shortcuts to each network scanner on which you wish to have the shortcuts available Automatically rotate landscape pages 28 By default document pages fed through the automatic document feeder ADF or placed on the scanner glass appear in the scan output in the same orientation as the originals The scanner can rotate the scan data to produce portrait orientation output for landscape orientation originals To enable portrait output of landscape document originals follow these steps 1 Double click the HP Scanning icon on the desktop and then select Scan Preferences on the Options menu 2 On the Document tab of the Scan Preferences dialog box select Automatically rotate landscape pages and then click OK NOTE In other scanning software the options for rotating pages are on the Layout tab of the ISIS or TWAIN Advanced Settings dialog box Useful scanning features Automatically remove blank pages To set your scan preferences to automatically remove blank pages from the automatic document feeder ADF output scan follow these steps 1 Double click the HP Scanning icon on the desktop select a document scan shortcut click Change Settings select Document Glass or Feeder as the scan type under Scan Shortcut Settings and then click Advanced Document Settings Select Automatically remove blank pages from feeder on the Advanced Document Settings dialog box and then click OK Click Save
65. ut tray when Instant Warm up is turned on and when Energy Savings is turned off Scanner does not start scan right away Make sure the scanner is turned on If the scanner has not been used recently the scanner lamp might need to go through a warm up period before scanning can begin If the scanner lamp needs to warm up it takes a moment after starting the software or pressing a scanner button for scanning to begin You can enable Instant Warm up mode in the HP Scanner Tools Utility or by a Scan Preferences Device tab setting Scanner is scanning items very slowly e If you are scanning to edit text the optical character recognition OCR software requires more processing time than for non OCR scans which is normal Wait for the item to scan E NOTE For the best OCR results scanner compression should be set to the minimum compression level or be disabled e Scanning ata higher resolution than necessary increases scanning time and creates a larger file with no additional benefit If you are scanning at a high resolution set the resolution to a lower level to increase scanning speed Custom scan shortcut names do not display correctly on the LCD In some languages you might see blank characters instead of certain special characters in your custom scan shortcut names To solve this problem use English Basic Latin characters to enter the abbreviated LCD name for your custom shortcuts Alternatively you can preface the abbreviated
66. vailable to all HP customers It is the fastest source for up to date product information and expert assistance including the following features e Online chat and email access to qualified online support specialists e Software firmware and driver updates for your product e Valuable product and troubleshooting information for technical issues e Proactive product updates support alerts and HP newsletters available when you register your product 3 HP support by phone e Support options and fees vary by product country region and language e Fees and policies are subject to change without notice Please see www hp com support for the latest information 4 Post warranty period After the limited warranty period help is available online at www hp com support 5 Extending or upgrading your warranty If you would like to extend or upgrade the product s warranty please contact your point of purchase or see the HP Care Pack Services at www hp com support 6 If you already purchased an HP Care Pack Service please check the support conditions in your contract Product support Index A ADF clean 32 clear jams 49 cut off images 50 feeding troubleshoot 50 load paper 9 maintenance 32 streaks troubleshoot 47 administer the scanner using Embedded Web Server 25 using HP Scanner Tools Utility 22 Attention LED 37 automatic document feeder ADF 7 B Back button 6 black scans troubleshoot 48 blank pages 29 bottom of ima
67. with the scanner To gain access to the Help start the HP scanning software and then click Help in the HP Scanning shortcuts dialog box menu The Help system provides information about the scanner hardware as well as information about the and HP scanning software Also see Scan troubleshooting in the general Troubleshooting and support section of the Help Scanner operation problems Scanner will not turn on Scanner lamp stays on Scanner does not start scan right away Scanner is scanning items very slowly Custom scan shortcut names do not display correctly on the LCD Vertical white stripes appear on the printed page Scan files are too large The bottom of the image is cut off when scanning from the scanner glass Issues with scanning documents or text OCR 42 Troubleshooting Scanner will not turn on If the scanner will not turn on when you press the scanner buttons verify the following e Verify that the power cable has not become disconnected from the scanner or unplugged from the power source e Ensure that the scanner is turned on See also Check the cables on page 38 Scanner lamp stays on The scanner lamp should time out and turn off automatically after 14 minutes of inactivity If the scanner lamp remains on after a long period of inactivity turn off the scanner wait 30 seconds and then turn on the scanner NOTE Thescanner lamp does not turn off when paper is in the automatic document feeder ADF inp

Download Pdf Manuals

Related Search

Related Contents

Makita 6906 User's Manual  Manuale  MÁS TENACIDAD DEMOSTRADA.  Philips Detachable water tank CRP176  B - Siemens  SKP-950 / SKP-1150  Kenwood DDX8032BT GPS Receiver User Manual  

Copyright © All rights reserved. Failed to retrieve file