HP 9000hns User's Manual
Contents
1. HP LaserJet 9000 9000n 9000dn and 9000hns printers Start Copyright O Hewlett Packard Company 2001 All Rights Reserved Reproduction adaptation or translation without prior written permission is prohibited except as allowed under the copyright laws Publication number C8519 90910 First Edition May 2001 Hewlett Packard Company 11311 Chinden Boulevard Boise Idaho 83714 U S A Trademark Credits Microsoft MS Windows Windows and Windows NT are U S registered trademarks of Microsoft Corporation Warranty The information contained in this document is subject to change without notice Hewlett Packard makes no warranty of any kind with respect to this information HEWLETT PACKARD SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE Hewlett Packard shall not be liable for any direct indirect incidental consequential or other damage alleged in connection with the furnishing or use of this information All other products mentioned herein may be trademarks of their respective companies Printer Setup Contents IOCUC Os ea ENS ben sone beat em ee 4 Installation checklist Lu LL LL LL LL LL LL LL 5 Prepare printer location 6 Check package contents ll lon LL La 8 Locate printer parts LL LL LL LL LL LL LL LL 9 Remove internal packaging LL Lu L2. 8 Printer Setup ENWW Step 3 Locate printer parts The following illustrations give the location and names of the important printer parts Printer parts front and rear views A Face up bin F Front door J Foreign interface B Control panel G Tray3 harness AUX C Tray 2 H EIO slots 3 K HP Fast InfraRed FIR Connect D Power switch I Parallel cable NAAN Li E Standard output bin connector Face down bin M Power cord connector ENWW Locate printer parts 9 Step 4 Remove internal packaging Remove all packaging from the printer WARNING This printer weighs approximately 63 5 kg 140 Ib HP recommends that four people move it to avoid injury to you and damage to the printer To remove internal packaging 1 Remove all orange packing material from the exterior of the printer and remove any cardboard or styrofoam material that is not orange 2 Remove all orange packing material from the standard output bin and the protective film from the display 3 Open the left side door and remove the two packing fuser spacers Orange tape connects fuser spacers to the outside of left door Remove the orange tape from the fuser shipping locks to the outside of the door Close the door after removing the fuser Spacers and the tape 4 Open the trays remove any orange packing material and close the trays 5 Open the front door and remove the orange packing tape at the front transfer roller area and on the lock le
3. 3 Rotate the lever downward to the unlock position Position the cartridge as shown with the arrow on the left side pointing into the printer and align it with the printer guides Slide the cartridge into the printer as far as it will go ENWW 5 Pressthe button on the green lever and turn the lever clockwise to the locked position 6 Close the front door ENWW Install print cartridge 13 Step 7 Load Trays 2 and 3 This section describes how to load A4 or letter size paper For instructions on loading and configuring other sizes and types of media see the HP LaserJet 9000 Introduce manual user guide that came on the CD ROM CAUTION To avoid a paper jam never open a tray while the printer is printing from that tray To load Tray 2 and Tray 3 1 Pull the tray open until it stops 2 Loada stack of Letter or A4 size paper with the top of the stack toward the rear of the tray For single sided printing the side to be printed should be down For double sided printing the first side to be printed should be up 3 Adjust the left Y paper guide by pressing the tab on the guide and sliding it to the mark for A4 or letter size paper 14 Printer Setup ENWW Adjust the front X paper guide by pressing the tab on the guide and Sliding it to the mark for A4 or letter size paper Close the tray until it stops Repeat steps 1 through 6 to load the other tray E
4. o If you do not have an HP Maintenance Agreement or HP SupportPack contact an HP authorized service or support provider 32 Printer Setup ENWW Limited Warranty for Print Cartridge Life Note The warranty below applies to the print cartridge that came with this printer This HP Print Cartridge is warranted to be free from defects in materials and workmanship for cartridge life which is indicated by a printer control panel cartridge end of life message HP will at HP s option either replace products which prove to be defective or refund your purchase price The warranty does not cover cartridges which have been refilled are emptied abused misused or tampered with in any way This limited warranty gives you specific legal rights You may have other rights which vary from state to state province to province and country to country To the extent allowed by applicable law in no event shall Hewlett Packard Company be liable for any incidental consequential special indirect punitive or exemplary damages or lost profits from any breach of this warranty or otherwise ENWW Warranty and regulatory information 33 HP Software License Terms ATTENTION USE OF THE SOFTWARE IS SUBJECT TO THE HP SOFTWARE LICENSE TERMS SET FORTH BELOW USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE LICENSE TERMS IF YOU DO NOT ACCEPT THESE LICENSE TERMS YOU MAY RETURN THE SOFTWARE FOR A FULL REFUND IF THE SOFTWARE IS BUNDLED WITH A
5. correct printer name appears 3 Printthe document If the document prints your printer setup is complete If the document does not print correctly check your setup and configuration For additional assistance see Customer support options worldwide on page 28 ENWW Verify printer setup 27 Customer support options worldwide Customer support and product repair assistance for the U S and Canada o Inthe U S call 1 208 323 2551 Monday through Friday from 6 A M to 10 P M and Saturday 9 A M to 4 P M Mountain time o In Canada call 1 905 206 4663 or 1 800 387 3867 Monday through Friday from 8 A M to 8 P M Mountain time Support is free of charge during the warranty period However your standard long distance phone charges still apply Have your system nearby and your serial number ready when calling If you know your printer needs repair call 1 800 243 9816 to locate your nearest HP Authorized service provider 28 Printer Setup ENWW ENWW European customer support center language and In country options available The support centers for most countries are open Monday through Friday 8 30 A M to 18 00 P M CET HP provides a free telephone support service during the warranty period By calling a telephone number listed below you will be connected to a responsive team waiting to help you If you reguire support after your warranty has expired you can receive support for a fee through the same te
6. output devices with the HP LaserJet 9000 series 2 Connectthe power cord to the printer a grounded power strip or an AC outlet 3 Press the power switch to turn the printer on in position After the printer warms up the RERE message should appear on the control panel display 4 Ifyou have the optional 3 000 sheet stapler stacker or stacker optional Tray 4 or both installed check that the light on them is solid green If the light is amber flashing or off see the HP LaserJet 9000 Use manual supplemental user guide that can be downloaded from www hp com support lj9000 Connect power cord 19 Step 10 Change the control panel overlay The control panel comes with an English overlay installed If necessary use the procedure below to change the control panel overlay to one included in the box To change the overlay 1 Locate the power switch on the front of the printer Press the power switch to turn the printer off button out 2 Insert your fingernail or a thin rigid object in back of the overlay and lift up 3 Gently lift the overlay up and backward to move it away from the printer 20 Printer Setup ENWW 4 Position the new overlay over the control panel Align the ends of the overlay with the holes on the control panel and slide the overlay in 5 Snap the overlay firmly onto the control panel Ensure that the overlay is flat against the control panel 6 If you have an optional 3 000 s
7. 03 8877 8000 China 86 0 10 6564 5959 Hong Kong 85 2 2802 4098 India 91 11 682 6035 Indonesia 62 21 350 3408 Japan 81 3 3335 8333 Republic of Korea Seoul 82 2 3270 0700 Outside Seoul 080 999 0700 Latin America 30 Printer Setup Argentina 0810 555 5520 Brazil Greater Sao Paulo 11 3747 7799 Outside Greater Sao Pauolo 0800 157751 Chile 800 22 5547 Guatemala 800 999 5305 Malaysia 60 3 295 2566 New Zealand 64 9 356 6640 Philippines 63 2 867 3551 Singapore 65 272 5300 Taiwan 886 2 2717 0055 Thailand 66 2 661 4000 Vietnam 84 0 8 823 4530 Mexico Mexico City 52 58 9922 Outside Mexico City 01 800 472 6684 Peru 0 0800 10111 Puerto Rico 1 877 2320 589 Venezuela Caracas 207 8488 Outside Caracas 800 47 777 ENWW Warranty and regulatory information ENWW Hewlett Packard limited warranty statement HP PRODUCT DURATION OF WARRANTY HP LaserJet 9000 9000n On site 1 year or 600 000 pages 9000dn 9000hns whichever comes first HP warrants HP hardware accessories and supplies against defects in materials and workmanship for the period specified above If HP receives notice of such defects during the warranty period HP will at its option either repair or replace products which prove to be defective Replacement products may be either new or like new HP warrants that HP software will not fail to execute its programming instructions f
8. EC 60825 1 1993 A1 1997 EN 60825 1 1994 A11 1996 Class 1 Laser LED Product CISPR 22 1997 EN 55022 1998 Class B EN 55024 1998 IEC 6100 3 2 1995 EN 61000 3 2 1995 IEC61000 3 3 1994 EN 61000 3 3 1995 FCC Title 47 CFR Part 15 Class B ICES 003 Issue 3 AS NZS 3548 1995 Supplementary Information The product herewith complies with the requirements of the EMC Directive 89 336 EEC and the Low Voltage Directive 73 23 EEC and carries the CE Marking accordingly 1 The product was tested in a typical configuration with Hewlett Packard Personal Computer Systems 2 This Device complies with Part 15 of the FCC Rules Operation is subject to the following two Conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation 3 The Product exhibits Class A operation when connected to Local Area Network LAN cables using print Server accessories Hewlett Packard Company Boise Idaho USA Nov 22 2000 Australia Contact Product Regulations Manager Hewlett Packard Australia Ltd 31 41 Joseph Street Blackburn Victoria 3130 Australia European Contact Your Local Hewlett Packard Sales and Service Office or Hewlett Packard Gmbh Department HQ TRE Standards Europe Herrenberger StraBe1 10 140 D 71034 B blingen FAX 49 7031 14 3143 USA Contact Product Regulations Manager Hewlett Packard Company PO Box 15 M
9. ECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY SATISFACTORY OUALITY AND FITNESS FOR A PARTICULAR PURPOSE 8 HP will be liable for damage to tangible property per incident up to the greater of 300 000 or the actual amount paid for the product that is the subject of the claim and for damages for bodily injury or death to the extent that all such damages are determined by a court of competent jurisdiction to have been directly caused by a defective HP product 9 TOTHEEXTENT ALLOWED BY LOCAL LAW THE REMEDIES IN THIS WARRANTY STATEMENT ARE THE CUSTOMER S SOLE AND EXCLUSIVE REMEDIES EXCEPT AS INDICATED ABOVE IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT SPECIAL INCIDENTAL CONSEOUENTIAL INCLUDING LOST PROFIT OR DATA OR OTHER DAMAGE WHETHER BASED IN CONTRACT TORT OR OTHERWISE 10 FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND THE WARRANTY TERMS CONTAINED IN THIS STATEMENT EXCEPT TO THE EXTENT LAWFULLY PERMITTED DO NOT EXCLUDE RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU Service During and After the Warranty Period o f printer hardware fails during the warranty period contact an HP authorized service or support provider o If printer hardware fails after the warranty period and you have an HP Maintenance Agreement or HP SupportPack request service as specified in the agreement
10. L LL 10 Install accessories LL LL LL LL LL LL LL 11 Install print cartridge LL LL LL LL 12 Load Trays 2 and 3 ee 14 Connect printer cables 16 Connecting a parallel cable 17 Connecting to Ethernet 10 100Base TX network 18 Connect power cord Lu LL LL eee 19 Change the control panel overlay 20 Configure the control panel display language 22 Print a configuration page 23 Install printing software 00 24 Installing Windows printing software 25 Installing Macintosh printing software 26 Verify printer setup es 27 Customer support options worldwide 28 Warranty and regulatory information 31 Hewlett Packard limited warranty statement 31 Limited Warranty for Print Cartridge Life 33 HP Software License Terms 34 FCC regulations a oana a 36 Safety Information eee 38 Declaration of Conformity ua LL LL LL LL 40 ENWW Contents 3 Introduction Congratulations on your purchase of the HP LaserJet 9000 Series printer This series of printers is available in four configurations HP LaserJet 9000 printer The HP LaserJet 9000 printer product number C8519A comes standard with 64 Megabyt
11. NOTHER PRODUCT YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND The following License Terms govern your use of the accompanying Software unless you have a separate signed agreement with HP License Grant HP grants you a license to Use one copy of the Software Use means storing loading installing executing or displaying the Software You may not modify the Software or disable any licensing or control features of the Software If the Software is licensed for concurrent use you may not allow more than the maximum number of authorized users to Use the Software concurrently Ownership The Software is owned and copyrighted by HP or its third party suppliers Your license confers no title to or ownership in the Software and is not a sale of any rights in the Software HP s third party suppliers may protect their rights in the event of any violation of these License Terms Copies and Adaptations You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software You must reproduce all copyright notices in the original Software on all copies or adaptations You may not copy the Software onto any public network 34 Printer Setup ENWW No Disassembly or Decryption You may not disassemble or decompile the Software unless HP s prior written consent is obtained In some jurisdictions HP s consent may not be require
12. NWW Load Trays 2and3 15 Step 8 Connect printer cables The printer can connect to a computer using a parallel cable or to the network using an optional HP Jetdirect print server Connection to a Token Ring network is available through an optional Token Ring card For printers eguipped with an optional HP Jetdirect print server a twisted pair network cable connection is provided through a 10 100Base TX RJ 45 connector The printer also has a connector for HP Fast InfraRed Connect a Foreign Interface Harness and an HP Jet Link Connector Parallel Connector Parallel S a HP Jetdirect print server RJ 45 connector W 3 OO I Foreign Interface Harness AUX optional N HP FIR FIR optional HP Jet Link connector Accessory for optional accessories 5 LO Location of Interface Ports 16 Printer Setup ENWW Connecting a parallel cable Use a paralle cable if you want to connect the printer directly to a computer To ensure reliability use an IEEE 1284 bidirectional C type parallel cable These cables are clearly marked with IEEE 1284 Only IEEE 1284 cables support all of the advanced printer features To connect a parallel cable 1 Make sure the printer and the computer power are turned off 2 Connect the parallel cable to the printer parallel port Press the locking release levers while connecting the cable Note If installing the cable is difficult m
13. P LaserJet 9000 9000N 9000DN kirjoittimen sis ll ei ole k ytt j n huollettavissa olevia kohteita 38 Printer Setup ENWW Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkil T llaiseksi huoltotoimenpiteeksi ei katsota v riainekasetin vaihtamista paperiradan puhdistusta tai muita k ytt j n k sikirjassa lueteltuja k ytt j n teht v ksi tarkoitettuja yll pitotoimia jotka voidaan suorittaa ilman erikoisty6kaluja Varo Mik li kirjoittimen suojakotelo avataan olet alttiina n kym tt m lle lasers teilylle laitteen ollessa toiminnassa l katso s teeseen Varning Om laserprinterns skyddsh lje ppnas d apparaten r i funktion uts ttas anv ndaren f r osynlig laserstr lning Betrakta ej str len Tiedot laitteessa k ytett v n laserdiodin s teilyominaisuuksista Aallonpituus 775 795 nm Teho 5 MW Luokan 3B laser ENWW Warranty and regulatory information 39 Declaration of Conformity according to ISO IEC Guide 22 and EN 45014 Manufacturer s Hewlett Packard Company Name Manufacturer s 11311 Chinden Boulevard Address Boise Idaho 83714 1021 USA declares that the product Product Name HP LaserJet 9000 9000N 9000DN Printer Model Numbers C8519A C8520A C8521A Printer Product Options ALL conforms to the following Product Specifications SAFETY IEC 60950 1991 A1 1992 A2 1993 A3 1995 A4 1996 EN 60950 1992 A1 1993 A2 1993 A3 1995 A4 1997 A11 1997 I
14. ail Stop 160 Boise Idaho 83707 0015 Phone 208 396 6000 40 Printer Setup ENWW invent copyright 2001 Hewlett Packard Company Www hp com support lj9000 english C85 19 909 519 909 0
15. ake sure you have the correct cable 3 Connect the other end of the cable to the proper connector on the computer ENWW Connect printer cables 17 Connecting to Ethernet 10 100Base TX network Use the RJ 45 connector if you want to connect the printer to an Ethernet 10 100Base TX network The HP Jetdirect print server is an optional accessory for the base model and standard on the n dn and hns models HP Jetdirect print servers are available for many different network connections To connect to Ethernet 10 100Base TX network 1 Locate the power switch on the front of the printer Press the power switch to turn the printer off out position 2 Connect a twisted pair network cable to the RJ 45 connector on the HP Jetdirect print server installed in the printer 3 Connect the other end of the cable to the network 18 Printer Setup ENWW Step 9 Connect power cord ENWW This section describes how to connect the power cord HP recommends connecting the power cord to a surge protector To connect the power cord 1 Locate the power switch on the front of the printer Make sure the printer Is turned off out position Note If the printer is located on top of the 2 000 sheet feeder do not connect the printer power cord to the convenience receptacle on this device This connector Is designed to connect to the paper
16. cable is reguired to comply with the FCC rules 36 Printer Setup ENWW Canadian DOC Regulations Complies with Canadian EMC Class B reguirements lt lt Conforme a la classe B des normes canadiennes de compatibilite electromagnetigues lt lt CEM gt gt gt gt VCCI Statement Japan VCCI class B product CORB PRUBRESERESALM Bl ties VCC D8 ECET FFABIRRHRE CT CORBIS RRR CEAT DTCEERMELTIIKI N CORBMIVAPTVEV AYR CELTAS NS EC SSeS SHCTCEMHVET EX U IRI Va AAS CTE O TIEL URRY IRWALTE SI Translation This equipment is in the Class B category information technology equipment based on the rules of Voluntary Control Council For Interference by Information Technology Equipment VCCI Although aimed for residential area operation radio interference may be caused when used near a radio or TV receiver Read the instructions for correct operation Korean EMI Statement AMSA CHU BA 7171 0 717 WHASSLS AAA AYA HE 7 NEN FANSAUME EE PENGOM ASS T Ha HU ENWW Warranty and regulatory information 37 WARNING Safety Information Laser Safety The Center for Devices and Radiological Health CDRH of the U S Food and Drug Administration has implemented regulations for laser products manufactured since August 1 1976 Compliance is mandatory for products marketed in the United States This printer is certified as a Class 1 laser product under the U S Department of Health and Human Services DHHS Radiatio
17. d for limited disassembly or decompilation Upon request you will provide HP with reasonably detailed information regarding any disassembly or decompilation You may not decrypt the Software unless decryption is a necessary part of the operation of the Software Transfer Your license will automatically terminate upon any transfer of the Software Upon transfer you must deliver the Software including any copies and related documentation to the transferee The transferee must accept these License Terms as a condition to the transfer Termination HP may terminate your license upon notice for failure to comply with any of these License Terms Upon termination you must immediately destroy the Software together with all copies adaptations and merged portions in any form Export Reguirements You may not export or reexport the Software or any copy or adaptation in violation of any applicable laws or regulations U S Government Restricted Rights The Software and any accompanying documentation have been developed entirely at private expense They are delivered and licensed as commercial computer software as defined in DFARS 252 227 7013 Oct 1988 DFARS 252 211 7015 May 1991 or DFARS 252 227 7014 Jun 1995 as a commercial item as defined in FAR 2 101 a or as Restricted computer software as defined in FAR 52 227 19 Jun 1987 or any equivalent agency regulation or contract clause whichever is applicable You ha
18. e MB RAM wide format printing and two 500 sheet trays Note The HP LaserJet 9000 reguires an optional enhanced input output EIO card to connect to a network HP LaserJet 9000n printer The HP LaserJet 9000n printer product number C8520A comes standard with 64 MB RAM wide format printing two 500 sheet trays a 100 sheet multipurpose tray optional Tray 1 and an optional HP Jetdirect print server HP LaserJet 9000dn printer Ce The HP LaserJet 9000dn printer product number C8521 A comes A standard with 64 MB RAM wide format printing two 500 sheet trays a 100 sheet multipurpose tray optional Tray 1 an optional HP Jetdirect print server and an optional duplex printing accessory for printing on both sides of paper HP LaserJet 9000hns printer The HP LaserJet 9000hns printer product number C8522A contains the HP LaserJet 9000dn a 2 000 sheet input tray optional Tray 4 and an optional 3 000 sheet stapler stacker or an optional 3 000 sheet stacker 4 Printer Setup ENWW Installation checklist This guide will help you set up and install your new printer For proper installation please complete each section in order o Unpack the printer steps 1 4 o Install the printer steps 5 12 e Install printing software step 13 e Verify printer setup step 14 WARNING The printer is heavy HP recommends that four people move it to avoid injury to you and damage to the printer ENWW Installati
19. heet stapler stacker or stacker optional Tray 4 or both connect their power cords to a surge protector or AC outlet as well ENWW Change the control panel overlay 21 Step 11 Configure the control panel display language By default the control panel on the printer displays messages in English If necessary set the printer to display messages and print configuration pages in another supported language Note When the power to the printer is turned on for the first time you have the option to set the language to display messages in your own language To configure the control panel language 1 Press v 2 Use A or to scroll to Configure Devices and press v 3 Use A or V to scroll to Ssstem Setue and press v 4 Use A or V to scroll to iarauaae and press v 5 Use A or V to scroll to your language and press v Note For Japanese Turkish Czech Russian Hungarian and Polish language selection will change the default symbol set for the specific language For all other languages the default symbol set is PC 8 22 Printer Setup ENWW Step 12 Print a configuration page Print a configuration page to make sure the printer is operating correctly To print a configuration page 1 Press 22 on the numeric keypad The configuration page prints If you have an HP Jetdirect printer server installed in the printer an HP Jetdirect network configuration page also prints 2 If you have optional accessories such as a duplex pri
20. lephone number The fee is charged on a per incident basis When calling HP have the following information ready product name and serial number date of purchase and description of the problem o Austria 43 0 810 00 6080 Netherlands 31 0 20 606 o Belgium 8751 Dutch 32 0 2 626 8806 o Norway 472211 6299 French 32 0 2 626 8806 o Poland 48 22 865 98 00 o Czech Republic 42 002 6130 amp Portugal 351 21 3176333 7310 e Romania 40 1 315 44 42 or e Denmark 45 39 29 4099 01 3154442 e International English 44 e Russian Federation 0 207 512 52 02 Moscow 7 095 797 3520 e Finland 358 0 203 47 288 St Petersburg 7 812 346 e France 33 0 1 43 62 34 34 7997 e Germany 49 0 180 5258143 Spain 34 902 321 123 o Greece 30 0 1 619 64 11 o Sweden 46 0 8 619 2170 e Hungary 36 0 1 382 1111 o Switzerland 41 0 848 80 11 o Ireland 353 0 1 662 5525 11 e Italy 39 02 264 10350 o Turkey 90 212 221 69 69 o Ukraine 7 380 44 490 3520 e U K 44 0 207 512 52 02 Africa and Middle East e Egypt 202 7956222 o United Arab Emirates Bahrain o Israel 972 0 9 9524848 Jordan Kuwait Lebanon e South Africa Oman Palestine Oatar Saudi Inside RSA 086 000 1030 Arabia Yemen 971 4 883 8454 Outside RSA 27 11 258 o International English 44 9301 0 207 512 52 02 Customer support options worldwide 29 Worldwide support centers Hours of operation vary by country or region Asia Pacific Australia
21. n Performance Standard according to the Radiation Control for Health and Safety Act of 1968 Since radiation emitted inside this printer is completely confined within protective housings and external covers the laser beam cannot escape during any phase of normal user operation Using controls making adjustments or performing procedures other than those specified in this manual may resultin exposure to hazardous radiation Product Information Sheet The Toner Product Information Sheet can be obtained by calling the U S HP FIRST Fax Information Retrieval Support Technology at 1 800 333 1917 International customers should see the front of this manual for appropriate phone numbers and information Laser Statement for Finland Luokan 1 laserlaite Klass 1 Laser Apparat HP LaserJet 9000 9000N 900DN laserkirjoitin on k ytt j n kannalta turvallinen luokan 1 laserlaite Normaalissa k yt ss kirjoittimen suojakotelointi est lasers teen p syn laitteen ulkopuolelle Laitteen turvallisuusluokka on m ritetty standardin EN 60825 1 1994 mukaisesti Varoitus Laitteen k ytt minen muulla kuin k ytt ohjeessa mainitulla tavalla saattaa altistaa k ytt j n turvallisuusluokan 1 ylitt v lle n kym tt m lle lasers teilylle Varning Om apparaten anv nds p annat s tt n i bruksanvisning specificerats kan anv ndaren uts ttas f r osynlig laserstr lning som Overskrider gransen f r laserklass 1 HUOLTO H
22. nting accessory or Tray 4 installed check the configuration page to ensure that it lists them as installed ENWW Print a configuration page 23 Step 13 Install printing software The printer comes with printing software on a CD ROM The printer drivers on this CD ROM must be installed to take full advantage of the printer features If you do not have access to a CD ROM drive you can download the printing software from the Internet at www hp com support lj9000 Depending on the configuration of Windows driven computers the installation program for the printer software automatically checks the computer for Internet access and provides an option to obtain the latest software from the Internet Note Printer installation software for UNIX HP UX Sun Solaris networks is available for download at www hp com support net printing See the HP Customer Care pages at the front of the HP LaserJet 9000 Introduce manual user guide that came on the CD ROM for more information 24 Printer Setup ENWW Installing Windows printing software This section describes how to install Windows printing software The software is supported on Windows 95 Windows 98 Windows NT 4 0 Windows 2000 and Windows Millennium ME To install the software 1 Close all running programs 2 Insert the CD ROM into the CD ROM drive Depending on the computer configuration the installation program may automatically run If the program does not run automatically On
23. on checklist 5 Step 1 Prepare printer location Printer size Prepare a location for the printer that allows for these physical and environmental reguirements 352 8 mm 13 9 in 638 mm 25 1 in OD O O 3 3 W D to WwW NG 253 33 352 8 mm 13 9 in 638 mm 25 1 in O O O 3 3 W O D 5 HP LaserJet 9000 Printer Dimensions top and side views 6 Printer Setup ENWW ENWW Location reguirements for the printer A level area on the floor Space allowance around the printer A well ventilated room No exposure to direct sunlight or chemicals including ammonia based cleaning solutions Adequate power supply 15A 110V or 220V circuit located near the printer A stable environment no abrupt temperature or humidity changes Relative humidity 20 percent to 80 percent Room temperature 50 F to 91 F 10 C to 32 5 C Printer weight without print cartridge HP LaserJet 9000 printer 63 5 kg 140 Ib HP LaserJet 9000n printer 69 4 kg 153 Ib HP LaserJet 9000dn printer 76 2 kg 168 Ib HP LaserJet 9000hns printer 76 2 kg 168 Ib Prepare printer location 7 Step 2 Check package contents power cord n O printer 7 control panel overlay printer documentation this manual print cartridge on printer SI CD ROM including user manual Package contents
24. or the period specified above due to defects in material and workmanship when properly installed and used If HP receives notice of such defects during the warranty period HP will replace software media which does not execute its programming instructions due to such defects HP does not warrant that the operation of HP products will be uninterrupted or error free If HP is unable within a reasonable time to repair or replace any product to a condition as warranted customer will be entitled to a refund of the purchase price upon prompt return of the product HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use The warranty period begins on the date of the delivery or on the date of installation if installed by HP If customer schedules or delays HP installation more than 30 days after delivery warranty begins on the 31st day from delivery Warranty does not apply to defects resulting from a improper or inadequate maintenance or calibration b software interfacing parts or supplies not supplied by HP c unauthorized modification or misuse d operation outside of the published environmental specifications for the product or e improper site preparation or maintenance Warranty and regulatory information 31 7 TOTHEEXTENT ALLOWED BY LOCAL LAW THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY WHETHER WRITTEN OR ORAL IS EXPRESSED OR IMPLIED AND HP SP
25. the Start menu click Run Type x setup where X is the letter of the CD Rom drive and click OK 3 Follow the instructions on the computer screen ENWW Install printing software 25 Installing Macintosh printing software This section describes how to install Macintosh printing software To install Macintosh printing software PA O N Gi 26 Printer Setup Quit all running applications Insert the CD ROM into the CD ROM drive Double click the HP LaserJet Installers folder Double click the Installer icon for the desired language and follow the instructions on the screen Open the Chooser from the Apple menu Click the LaserWriter 8 icon If the icon is not there consult your Mac OS Help for troubleshooting information or contact HP Customer Care see the front pages of the HP LaserJet 9000 Introduce manual user guide that came on the CD ROM If you are on a network with multiple zones select the zone in the AppleTalk Zones box where the printer is located If this is unknown ask your network administrator Double click the desired printer An icon should appear Close the Chooser by clicking the Go Away Close box in the upper left corner ENWW Step 14 Verify printer setup The easiest way to verify that the installation has been completed successfully is to print a document from a program To verify printer setup 1 Open a program of your choice Open or create a simple document 2 Make sure the
26. ve only those rights provided for such Software and any accompanying documentation by the applicable FAR or DFARS clause or the HP standard software agreement for the product involved ENWW Warranty and regulatory information 35 FCC regulations This eguipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This eguipment generates uses and can radiate radio freguency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures o Reorient or relocate the receiving antenna o Increase separation between equipment and receiver o Connect equipment to an outlet on a circuit different from that to which the receiver is located o Consult your dealer or an experienced radio TV technician Note Any changes or modifications to the printer not expressly approved by HP could void the user s authority to operate this eguipment Use of a shielded interface
27. ver for the print cartridge Close the door Note Save all packing material You may need it to repack the printer at a later date 10 Printer Setup ENWW Step 5 Install accessories Install any paper handling accessories that you purchased with the printer or separately Use the installation instructions that are packaged with the accessories If you have a 3 000 sheet stapler stacker or stacker and a duplexer Tray 4 or both install the duplexer and Tray 4 before trying to install the 3 000 sheet stapler stacker or stacker HP Fast InfraRed Connect Tray 4 2 000 Duplex printing accessory sheet input 0 Tray 1 multipurpose duplexer tray tray Optional accessories ENWW Install accessories 11 Step 6 Install print cartridge Use this procedure to install the print cartridge If toner gets on your clothing wipe it off with a dry cloth and wash the clothing in cold water Hot water sets toner into fabric 1 12 Printer Setup To install the print cartridge Before removing the print cartridge from its packaging set the print cartridge on a sturdy surface Gently slide the print cartridge out of the packaging CAUTION To prevent damage to the print cartridge use two hands when removing it from its packaging Note The print cartridge does not have a pull tab 2 Openthe front door on the printer
Download Pdf Manuals
Related Search