HP 3C339 User's Manual
Contents
1. 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version 3 51 9 Double click on the Network icon and agree to install Windows NT Networking on your computer 10 Insert the Windows NT Workstation CD 11 In Windows NT Setup enter the path to your NT files and click on Continue If you have an HP preloaded HDD set path to C 11386 12 Click on Do Not Detect from the Network Adapter Card Detection dialog box and click on Continue in the second Network Adapter Card Detection dialog box 13 From the Drop Down List scroll down and select lt Other gt Requires disk from manufacturer then click on Continue 14 Set the path to A V in the Insert Disk dialog box and then insert the 3COM 3C339 drivers disk 15 Click OK at the Install Driver dialog box If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 16 Select 3Com Token Ring 3C339 Adapter in the Select OEM Option dialog box and click OK 17 Click on the OK button in the Bus Location dialog box 18 Choose the appropriate network protocols by clicking the check boxes in the Windows NT Setup dialog box and click on Continue If you do not have the required information contact your network administrator 19 Choose to install all applicable TCP IP options and select Continue If you do not have the required informati2. HP Vectra VE 7 VE8 with DOS and MS Windows for Workgroups 3 11 in stalled 3COM 3C339TokenRing card and drivers disk DOS ODI File Name tlvmp339 dos DOS and MS Windows for Workgroups 3 11 media Novell Netware server 3 12 that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Netware client for DOS and MS Windows Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 set to PNP enabled turn the machine off install the 3COM 3C339 adapter card into an PCI slot Power on the machine and allow it to boot to a DOS prompt Insert the 3COM drivers diskette and execute 3C339CFG EXE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM cards driver diskette and insert Netware client for DOS and MS Windows disk 1 2 Connecting to a Netware 4 11 Server Windows for Workgroups 7 Execute INSTALL EXE 8 Specify the settings as listed below O CANWCLIENT O Yes g Yes O CAWINDOWS g No O 3Com Fast Etherlink therlink II Bus Master 9 Under the heading Select the driver for your network board insert the 3Com 3C339 drivers disk and set t
3. EXE 4 Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration 5 If changes are required save those changes and exit 6 Remove the 3COM cards driver diskette and restart the machine 7 After Windows loads click on Start to Settings and over to Control Panel 8 Double click on Network and select Add 9 Choose to add an adapter click on Add then on Have Disk 10 Insert the 3C339 drivers diskette and set path to A and hit Enter 1 Connecting to a Netware 3 12 Server Windows 95 SR2 If you have a Hewlett Packard pre loaded HDD set the path statement to C MASTERS LANDRV 3C509B 11 Highlight the adapter labeled 3Com Token Ring in PCI Mode and press OK 12 At the Network dialogue box click on the Identification folder 13 Enter your Computer Name Workgroup and Computer Description If you do not have a Computer name Workgroup name and Computer description contact your network administrator 14 Approve the Basic Configuration Resources by clicking on OK 15 When prompted set the path to your Windows 95 SR2 files and click on OK 16 Click on YES to complete installation and restart the machine Windows for Workgroups 2 Connecting to a Netware 4 11 Server Windows for Workgroups 2 Connecting to a Netware 4 11 Server Requirements
4. If changes are required save those changes and exit Remove the 3COM cards driver diskette and insert Netware client for DOS and MS Windows disk 1 Execute INSTALL EXE Specify the settings as listed below O CANWCLIENT g Yes g Yes 4 Connecting to a Windows NT Server 4 0 Windows for Workgroups Ver 3 11 O CAWINDOWS O No 9 Under the heading Select the driver for your network board insert the 3Com 3C339 drivers disk and set the path to A NETWARE CLIENT If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 NWCLIENT 10 Press Enter to continue the installation 11 When prompted insert the corresponding disks to complete file transfer and driver installation 12 When the install utility is finished press lt CRTL gt lt ALT gt lt DEL gt to restart the machine 13 After Windows loads open the NETWORK folder double click the NETWORK SETUP icon 14 At the Network Setup dialog box click on OK 15 Specify your User Name Workgroup and Computer Name in Microsoft Windows Network Names dialog box and click on OK The Drivers will now start to copy 16 Finish the network card installation by clicking on OK in the Network Setup message 17 To complete the installation click on Restart Computer button in the Windows Setup dialog box Windows 95 SR2 4 Connecting to a Windows NT Server 4 0 Windows 95 SR2 Requirem
5. A packar TokenLink Velocity PCI Network Interface Card 3339 Installation Guide Notice The information contained in this document is subject to change without notice Hewlett Packard makes no warranty of any kind with regard to this material including but not limited to the implied warranties of merchantability and fitness for a particular purpose Hewlett Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this material Hewlett Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett Packard This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated to another language without the prior written consent of Hewlett Packard Company Microsoft Windows and MS DOS are registered trademarks of Microsoft Corporation MMXTM is a trademark of Intel Corporation Pentium is aregistered trademark of Intel Corporation Hewlett Packard France Commercial Desktop Computing Division 38053 Grenoble Cedex 9 France 1998 Hewlett Packard Company Windows for Workgroups 1 Connecting to a Netware 3 12 Server Windows for Workgroups 1 Connecting to a Netware 3 12 Server Requirements HP Vectra VE 7 VE8 with DOS and MS Windows for Wo
6. COM s website and execute 3C3X9CFG EXE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM cards driver diskette and restart the machine After Windows loads click on Start to Settings and over to Control Panel Double click on Network and select Add Choose to add an adapter click on Add then on Have Disk 2 Connecting to a Netware 4 11 Server Windows 95 SR2 10 Insert the 3C339 drivers diskette and set path to A and hit Enter If you have a Hewlett Packard pre loaded HDD set the path statement to C MASTERS LANDRV 3C509B 11 Highlight the adapter labeled 3Com Token Ring in PCI Mode 12 and press OK 13 At the Network dialogue box click on the Identification folder 14 Enter your Computer Name Workgroup and Computer Description If you do not have a Computer name Workgroup name and Computer description contact your network administrator 15 Approve the Basic Configuration Resources by clicking on OK 16 When prompted set the path to your Windows 95 SR2 files and click on OK 17 Click on YES to complete installation and restart the machine Windows for Workgroups Ver 3 11 3 Connecting to a Windows NT Server 3 51 Windows for Workgroups Ver 3 11 3 Conn
7. HP preloaded HDD set path to C Masters LanDrv 3C339 NWCLIENT 10 Press Enter to continue the installation 11 When prompted insert the corresponding disks to complete file transfer and driver installation 12 When the install utility is finished press lt CRTL gt lt ALT gt lt DEL gt to restart the machine 13 After Windows loads open the NETWORK folder double click the NETWORK SETUP icon 14 Select Networks and verify that Novell Netware Workstation Shell 4 0 and above is listed under Install Windows support for the following network only and click on OK Windows 95 SR2 1 Connecting to a Netware 3 12 Server Windows 95 SR2 Requirements e HP Vectra VE7 VE8 with Windows 95 SR2 installed e 3COM 3C 339 Token Ringcard and drivers disk e Windows 95 SR2 media e Novell Netrware 3 12 server that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address 300 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 turned off install the 3COM 3C339 adapter card into an PCI slot 2 Power on the machine and restart Windows 95 SR2 in MS DOS Mode 3 Insert the 3COM drivers diskette downloaded from 3COM s website and execute 3C3X9CFG
8. ROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 turned off install the 3COM Token Ring 3C339 adapter card into an PCI slot Connect network cable media to the 3COM 3C339 card Insert a DOS bootable diskette and power on the machine After booting insert the 3COM Software 3C339 drivers disk and execute A 3C3X9CFG E XE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM software driver diskette and reboot the machine After Windows loads open the Main program group double click on Control Panel icon 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version 3 51 9 Double click on the Network icon and agree to install Windows NT Networking on your computer 10 Insert the Windows NT Workstation CD 11 In Windows NT Setup enter the path to your NT files and click on Continue If you have an HP preloaded HDD set path to C 11386 12 Click on Do Not Detect from the Network Adapter Card Detection dialog box and click on Continue in the second Network Adapter Card Detection dialog box 13 From the Drop Down List scro
9. ard and drivers disk Microsoft Windows NT Workstation 4 0 and Service Pack Media Microsoft Windows NT Server 3 51 machine that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 turned off install the 3COM Token Ring 3C339 adapter card into an PCI slot Connect network cable media to the 3COM 3C339 card Insert a DOS bootable diskette and power on the machine After booting insert the 3COM Software 3C339 drivers disk and execute A 3C3X9CFG EXE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM software driver diskette and reboot the machine After Windows loads open the Main program group double click on Control Panel icon 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation 4 0 9 Double click on the Network icon and agree to install Windows NT Networking on your computer 10 Insert the Windows NT Workstation CD 11 In Windows NT Setup enter the path to your NT files and click on Co
10. bled Procedure 1 With the HP Vectra VE 7 VE8 turned off install the 3COM Token Ring 3C339 adapter card into an PCI slot Connect network cable media to the 3COM 3C339 card Insert a DOS bootable diskette and power on the machine After booting insert the 3COM Software 3C339 drivers disk and execute A 3C3X9CFG EXE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM software driver diskette and reboot the machine After Windows loads open the Main program group double click on Control Panel icon 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation 4 0 9 Double click on the Network icon and agree to install Windows NT Networking on your computer 10 Insert the Windows NT Workstation CD 11 In Windows NT Setup enter the path to your NT files and click on Continue If you have an HP preloaded HDD set path to C 1386 12 Click on Do Not Detect from the Network Adapter Card Detection dialog box and click on Continue in the second Network Adapter Card Detection dialog box 13 From the Drop Down List scroll down and select lt Other gt Requires disk from manufacturer then click on Continue 14 Set the path to A V in the Insert Disk dialog box and then insert the 3COM 3C339 d
11. ecting to a Windows NT Server 3 51 Requirements HP Vectra VE 7 VE8 with DOS and MS Windows for Workgroups 3 11 in stalled 3COM Token Ring 3C339 card and drivers disk ver 5 0 DOS ODI File Name T13c3x9 dos Size 52KB Date 2 28 97 DOS and MS Windows for Workgroups 3 11 media Microsoft Windows NT Server 3 51 machine that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration O Base Address DC00 e Interrupt Request Level 10 Procedure 1 With the HP Vectra VE 7 VE8 set to PNP enabled turn the machine off install the 3COM 3C339 adapter card into an PCI slot Power on the machine and allow it to boot to a DOS prompt Insert the 3COM drivers diskette and execute 3C3x9CFG EXE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM cards driver diskette and insert Netware client for DOS and MS Windows disk 1 Execute INSTALL EXE Specify the settings as listed below O CANWCLIENT g Yes g Yes 3 Connecting to a Windows NT Server 3 51 Windows for Workgroups Ver 3 11 O CAWINDOWS O No 9 Under the heading Select the driver for your network board insert the 3Com 3C339 drivers disk and set the path to A NETWARE CLIENT If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 NWCLIENT 10 Press Enter t
12. ents HP Vectra VE 7 VE 8with Windows 95 SR2 3COM TokenRing 3C 339 card and drivers disk Windows 95 media Microsoft Windows NT Server 4 0 machine that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Baud e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 turned off install the 3COM Token Ring Oo Co N O 3C339 adapter card into an PCI slot Connect network cable media to the 3COM 3C339 card Insert a DOS bootable diskette and power on the machine After booting insert the 3COM drivers disk Etherlink 3C339 Drivers and change to Drive A and execute 3C3X9CFG EXE Select Configure NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3Com Software driver diskette and reboot the machine Click on Start and point to Settings then select the Control Panel In the Control Panel group double click on the Network icon 4 Connecting to a Windows NT Server 4 0 Windows 95 SR2 10 In the Network dialog box click on the Add button 11 In the Select Network Component T
13. have the required information contact your network administrator n 17 Client for Microsoft Networks 18 Client for NetWare NetworksIPX SPX compatible Protocol NetBEUI 19 In the configuration folder click on Add then click Protocol and hit enter 20 Under Manufacturers high light Microsoft and under Network Protocols high light TCP IP and hit enter 21 In the Network dialog box click on the Identification folder and specify your Computer Name Workgroup and Computer Description and click on OK If you do not have the required information contact your network administrator 22 Approve the basic configuration by clicking on OK 23 When prompted specify the path to your Windows 95 files If you have an HP preloaded HDD set the path to CAMASTERS WIN95 SYSTE MICABSV 24 To complete the installation select Yes to restart your computer Windows NT Workstation Version 3 51 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation Version 3 51 Requirements HP Vectra VE 7 VE8 with Microsoft Windows NT Workstation 3 51 in stalled 3COM 3C339 card and drivers disk Microsoft Windows NT Workstation 3 51 and Service Pack Media Microsoft Windows NT Server 3 51 machine that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot P
14. he path to A NETWARE CLIENT If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 NWCLIENT 10 Press Enter to continue the installation 11 When prompted insert the corresponding disks to complete file transfer and driver installation 12 When the install utility is finished press lt CRTL gt lt ALT gt lt DEL gt to restart the machine 13 After Windows loads open the NETWORK folder double click the NETWORK SETUP icon 14 Select Networks and verify that Novell Netware Workstation Shell 4 0 and above is listed under Install Windows support for the following network only and click on OK Windows 95 SR2 2 Connecting to a Netware 4 11 Server Windows 95 SR2 Requirements HP Vectra VE7 VE8 with Windows 95 SR2 installed 3COM 3C 339 Token Ringcard and drivers disk Windows 95 SR2 media Novell Netrware 4 11 server that supports Net BE UI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP VE 7 VE8 turned off install the 3COM 3C339 adapter card into an PCI slot Power on the machine and restart Windows 95 SR2 in MS DOS Mode Insert the 3COM drivers diskette downloaded from 3
15. ll down and select lt Other gt Requires disk from manufacturer then click on Continue 14 Set the path to A V in the Insert Disk dialog box and then insert the 3COM 3C339 drivers disk 15 Click OK at the Install Driver dialog box If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 16 Select 3Com Token Ring 3C339 Adapter in the Select OEM Option dialog box and click OK 17 Click on the OK button in the Bus Location dialog box 18 Choose the appropriate network protocols by clicking the check boxes in the Windows NT Setup dialog box and click on Continue If you do not have the required information contact your network administrator 19 Choose to install all applicable TCP IP options and select Continue If you do not have the required information contact your network administrator 20 At the Network Settings dialog box click on OK 21 Accept the default NWLink IPX SPX Protocol Configuration and hit Enter 22 At the TCP IP Configuration screen choose to use DHCP or enter your TCP information and click on OK If you do not have the required information contact your network administrator Windows NT Workstation 4 0 3 Connecting to a Windows NT Server 3 51 Windows NT Workstation 4 0 Requirements HP Vectra VE 7 VE8 with Microsoft Windows NT Workstation 4 0 in stalled 3COM 3C339 c
16. mplete the installation select Yes to restart your computer Windows NT Workstation Version 3 51 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation Version 3 51 Requirements HP Vectra VE 7 VE8 with Microsoft Windows NT Workstation 3 51 in stalled 3COM 3C339 card and drivers disk Microsoft Windows NT Workstation 3 51 and Service Pack Media Microsoft Windows NT Server 4 0 machine that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 Vectra VE8 turned off install the 3COM Token Ring 3C339 adapter card into an PCI slot Connect network cable media to the 3COM 3C339 card Insert a DOS bootable diskette and power on the machine After booting insert the 3COM Software 3C339 drivers disk and execute A 3C3X9CFG E XE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM software driver diskette and reboot the machine After Windows loads open the Main program group double click on Control Panel icon
17. ntinue If you have an HP preloaded HDD set path to C 1386 12 Click on Do Not Detect from the Network Adapter Card Detection dialog box and click on Continue in the second Network Adapter Card Detection dialog box 13 From the Drop Down List scroll down and select lt Other gt Requires disk from manufacturer then click on Continue 14 Set the path to A V in the Insert Disk dialog box and then insert the 3COM 3C339 drivers disk 15 Click OK at the Install Driver dialog box If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 16 Select 3Com Token Ring 3C339 Adapter in the Select OEM Option dialog box and click OK 17 Click on the OK button in the Bus Location dialog box 18 Choose the appropriate network protocols by clicking the check boxes in the Windows NT Setup dialog box and click on Continue If you do not have the required information contact your network administrator 19 Choose to install all applicable TCP IP options and select Continue If you do not have the required information contact your network administrator 20 At the Network Settings dialog box click on OK 21 Accept the default NWLink IPX SPX Protocol Configuration and hit Enter 22 At the TCP IP Configuration screen choose to use DHCP or enter your TCP information and click on OK If y
18. o continue the installation 11 When prompted insert the corresponding disks to complete file transfer and driver installation 12 When the install utility is finished press lt CRTL gt lt ALT gt lt DEL gt to restart the machine 13 After Windows loads open the NETWORK folder double click the NETWORK SETUP icon 14 At the Network Setup dialog box click on OK 15 Specify your User Name Workgroup and Computer Name in Microsoft Windows Network Names dialog box and click on OK The Drivers will now start to copy 16 Finish the network card installation by clicking on OK in the Network Setup message 17 To complete the installation click on Restart Computer button in the Windows Setup dialog box Windows 95 SR2 3 Connecting to a Windows NT Server 3 51 Windows 95 SR2 Requirements HP Vectra VE 7 VE 8with Windows 95 SR2 3COM TokenRing 3C 339 card and drivers disk Windows 95 media Microsoft Windows NT Server 3 51 machine that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Plug and Play Compatibility Disabled e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 turned off install the 3COM T
19. oken Ring Oo Co N O 3C339 adapter card into an PCI slot Connect network cable media to the 3COM 3C339 card Insert a DOS bootable diskette and power on the machine After booting insert the 3COM drivers disk Etherlink 3C339 Drivers and change to Drive A and execute 3C3X9CFG EXE Select Configure NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3Com Software driver diskette and reboot the machine Click on Start and point to Settings then select the Control Panel In the Control Panel group double click on the Network icon 3 Connecting to a Windows NT Server 3 51 Windows 95 SR2 10 In the Network dialog box click on the Add button 11 In the Select Network Component T ype dialog box highlight Adapter then click on Add 12 Click on Have Disk in the Select Network adapters dialog box 13 Insert the 3COM Software Etherlink 3C339 Token Ring Drivers disk into the floppy drive 14 With the Path set to A in the Install From Disk dialog box click OK If you have an HP pre loaded HDD set the path statement to C MASTERS LANDRV 3C509B 15 Select the 3Com Token Ring in PCI mode and click on OK 16 Accept the default Network Protocols as seen below and click on OK If you do not
20. on contact your network administrator 20 At the Network Settings dialog box click on OK 21 Accept the default NWLink IPX SPX Protocol Configuration and hit Enter 22 At the TCP IP Configuration screen choose to use DHCP or enter your TCP information and click on OK If you do not have the required information contact your network administrator 23 At the Domain Workgroup Settings dialog box click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 24 To complete the installation remove the floppy disk and click on Restart Computer button in the Windows NT Workstation Networking Setup dialog box Windows NT Workstation 4 0 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation 4 0 Requirements HP Vectra VE 7 VE8 with Microsoft Windows NT Workstation 4 0 in stalled 3COM 3C339 card and drivers disk Microsoft Windows NT Workstation 4 0 and Service Pack Media Microsoft Windows NT Server 4 0 machine that supports Net BEUI TCP IP NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Plug and Play Compatibility Disabled e Full Duplex Disa
21. ou do not have the required information contact your network administrator 23 At the Domain Workgroup Settings dialog box click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 24 To complete the installation remove the floppy disk and click on Restart Computer button in the Windows NT Workstation Networking Setup dialog box Windows for Workgroups Ver 3 11 4 Connecting to a Windows NT Server 4 0 Windows for Workgroups Ver 3 11 4 Connecting to a Windows NT Server 4 0 Requirements HP Vectra VE 7 VE8 with DOS and MS Windows for Workgroups 3 11 in stalled 3COM Token Ring 3C339 card and drivers disk ver 5 0 DOS ODI File Name T13c3x9 dos Size 52KB Date 2 28 97 DOS and MS Windows for Workgroups 3 11 media Microsoft Windows NT Server 4 0 machine that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Device Configuration O Base Address DC00 e Interrupt Request Level 10 Procedure 1 With the HP Vectra VE 7 VE8 set to PNP enabled turn the machine off install the 3COM 3C339 TR adapter card into a PCI slot Power on the machine and allow it to boot to a DOS prompt Insert the 3COM drivers diskette ver 5 0 and execute 3C3x9CFG E XE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration
22. rivers disk 15 Click OK at the Install Driver dialog box If you have an HP preloaded HDD set path to C Masters LanDrv 3C339 16 Select 3Com Token Ring 3C339 Adapter in the Select OEM Option dialog box and click OK 17 Click on the OK button in the Bus Location dialog box 18 Choose the appropriate network protocols by clicking the check boxes in the Windows NT Setup dialog box and click on Continue If you do not have the required information contact your network administrator 19 Choose to install all applicable TCP IP options and select Continue If you do not have the required information contact your network administrator 20 At the Network Settings dialog box click on OK 21 Accept the default NWLink IPX SPX Protocol Configuration and hit Enter 22 At the TCP IP Configuration screen choose to use DHCP or enter your TCP information and click on OK If you do not have the required information contact your network administrator 23 At the Domain Workgroup Settings dialog box click on OK to accept the default Workgroup as your workgroup name If you do not have the required information contact your network administrator 24 To complete the installation remove the floppy disk and click on Restart Computer button in the Windows NT Workstation Networking Setup dialog box 4 Connecting to a Window
23. rkgroups 3 11 in stalled 3COM 3C339TokenRing card and drivers disk DOS ODI File Name tlvmp339 dos DOS and MS Windows for Workgroups 3 11 media Novell Netware server 3 12 that supports Net BEUI NWLink IPX SPX and NWLink NetBIOS transfer protocols Netware client for DOS and MS Windows Device Configuration e 1 0 Base Address DC00 e Interrupt Request Level 10 e Boot PROM Disabled e Transceiver Type Auto Select e Network Driver Optimization Windows or OS 2 Client e Maximum Modem Speed 9600 Bps e Full Duplex Disabled Procedure 1 With the HP Vectra VE 7 VE8 set to PNP enabled turn the machine off install the 3COM 3C339 adapter card into an PCI slot Power on the machine and allow it to boot to aDOS prompt Insert the 3COM drivers diskette and execute 3C339CFG EXE Select CONFIGURE NIC and verify the resource settings listed above under the heading Device Configuration If changes are required save those changes and exit Remove the 3COM cards driver diskette and insert Netware client for DOS and MS Windows disk 1 1 Connecting to a Netware 3 12 Server Windows for Workgroups 7 Execute INSTALL EXE 8 Specify the settings as listed below O CANWCLIENT O Yes g Yes O CAWINDOWS g No O 3Com Fast Etherlink therlink II Bus Master 9 Under the heading Select the driver for your network board insert the 3Com 3C339 drivers disk and set the path to A NETWARE CLIENT If you have an
24. s NT Server 4 0 Windows NT Workstation 4 0 4 Connecting to a Windows NT Server 4 0 Windows NT Workstation 4 0 Version Number 3COM 339 Rev 1
25. ype dialog box highlight Adapter then click on Add 12 Click on Have Disk in the Select Network adapters dialog box 13 Insert the 3COM Software Etherlink 3C339 Token Ring Drivers disk into the floppy drive 14 With the Path set to A in the Install From Disk dialog box click OK If you have an HP pre loaded HDD set the path statement to C MASTERS LANDRV 3C509B 15 Select the 3Com Token Ring in PCI mode and click on OK 16 Accept the default Network Protocols as seen below and click on OK If you do not have the required information contact your network administrator n 17 Client for Microsoft Networks 18 Client for NetWare NetworksIPX SPX compatible Protocol NetBEUI 19 In the configuration folder click on Add then click Protocol and hit enter 20 Under Manufacturers high light Microsoft and under Network Protocols high light TCP IP and hit enter 21 In the Network dialog box click on the Identification folder and specify your Computer Name Workgroup and Computer Description and click on OK If you do not have the required information contact your network administrator 22 Approve the basic configuration by clicking on OK 23 When prompted specify the path to your Windows 95 files If you have an HP preloaded HDD set the path to CAMASTERS WIN95 SYSTE MICABSV 24 To co
Download Pdf Manuals
Related Search