Honeywell UV 100E User's Manual
Contents
1. 6 Wipe your lamps with a clean dry cloth 7 Put your clean lamps back into the unit base by following Replacing Your Lamps Annually section steps 5 6 and 7 A A A WARNING UV Light Hazard Harmful to bare skin and eyes Can cause temporary or permanent loss of vision Never look at the lamps while illuminated Only view illumination by way of the light indicator located on the lamp knob To prevent exposure to ultraviolet light disconnect power to the ultraviolet air treatment system before servicing any part of the heating air conditioning system 8 Plug the cord into the nearby 120 Vac electrical outlet 9 Verify that the ultraviolet lamp s are operating only by viewing through the lamp light indicator on the lamp knob Never look directly at your lamps while illuminated 10 Reconnect the power to your HVAC system CAUTION UV Lamp Burn Hazard Harmful to bare skin Can cause severe burns Disconnect power 15 minutes before removing the ultraviolet lamp s IMPORTANT If the lamps in your model have external wires running along the glass surface be sure to avoid pulling on those wires Replacing Your Lamps Annually Annual replacement of your lamps is required To replace your lamps 1 Select and obtain the correct replacement lamp for your unit See Table 1 2 Disconnect the power to your HVAC system 3 Unplug your ultraviolet air treatment system cord from the electrical outlet and allow t2. e The UV100E1019 dual lamp unit is mounted in your return air duct of your HVAC system It has high efficiency performance in reducing airborne bacteria in return air systems e The UV100E1035 coil irradiation unit is mounted in your supply side air duct or downstream from the air conditioner cooling coils in your HVAC system The single lamp reduces mold and spores on duct surfaces coils and drain pans 69 1442 1 2 UV100E ULTRAVIOLET AIR TREATMENT SYSTEM HOW YOU CAN CHECK YOUR ULTRAVIOLET AIR TREATMENT SYSTEM OPERATION A A A WARNING UV Light Hazard Harmful to bare skin and eyes Can cause temporary or permanent loss of vision Never look at the lamps while illuminated Only view illumination by way of the light indicator located on the lamp knob To prevent exposure to ultraviolet light disconnect power to the ultraviolet air treatment system before servicing any part of the heating air conditioning system Do not mount device in location that allows ultraviolet light to be seen after installation Do not attempt to bypass the duct mount switch Do not attempt to open housing unit is sealed to prevent ultraviolet light exposure Your Ultraviolet Air Treatment System has a power cord that plugs into a 120 Vac electrical outlet Your unit is designed to prevent accidental contact with the voltage and with the ultraviolet rays in the sealed unit the ultraviolet lamps do not illuminate unless the base is mounted on t
3. 01 amp paper containing at least 10 vww honeywell com yourhome post consumer paper fibers
4. Honeywell envira caire UV100E Ultraviolet Air Treatment System OWNER S GUIDE 69 1442 1 U S Registered Tradem Copyri saat Hon smear c All Rights Reserved UV100E ULTRAVIOLET AIR TREATMENT SYSTEM HOW YOUR ULTRAVIOLET AIR TREATMENT SYSTEM WORKS When installed in forced air heating and cooling systems your UV100E Ultraviolet Air Treatment System kills a high percentage of micro organism contaminants in the air passing over it Individual results depend on how carefully all installation and maintenance requirements are followed and on the actual amount of time your air delivery fan operates You can capture and minimize micro organism pass through in your heating ventilation and air conditioning HVAC system when you combine your Ultraviolet Air Treatment System with a high efficiency air filtration system that includes an electronic air cleaner Talk to your installer about adding an electronic air cleaner to complement your air treatment system and provide added protection for you and your family Your UV100E Ultraviolet Air Treatment System unit is one of these three models a single lamp moderate efficiency return air unit a dual lamp high efficiency return air unit or an air conditioner coil irradiation unit e The UV100E1001 single lamp unit is mounted in the return air duct of your HVAC system It has moderate efficiency performance in reducing airborne bacteria in return air systems
5. OR DAMAGE OF ANY KIND INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESS OR IMPLIED OR ANY OTHER FAILURE OF THIS PRODUCT Some states do not allow the exclusion or limitation of incidental or consequential damages so this limitation may not apply to you THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS HEREBY LIMITED TO THE FIVE YEAR DURATION OF THIS WARRANTY Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This warranty gives you specific legal rights and you may have other rights which vary from state to state If you have any questions concerning this warranty please write Honeywell Customer Relations Honeywell 1985 Douglas Dr N MN10 1461 Golden Valley MN 55422 or call 1 800 468 1502 Monday Friday 7 00 a m to 5 30 p m Central time In Canada write Retail Products ON15 02H Honeywell Limited Honeywell Limit e 35 Dynamic Drive Scarborough Ontario M1V4Z9 Honeywell Home and Building Control Home and Building Control Honeywell Honeywell Limited Honeywell Limit e 1985 Douglas Drive North 35 Dynamic Drive Golden Valley MN 55422 Scarborough Ontario MIV 4z9 Your ome Expert Printed in U S A on recycled 69 1442 1 G H 3
6. amp cleaning is recommended as routine maintenance four times a year or every three months quarterly Use the Ultraviolet Lamp Cleaning Reminder Schedule Fig 1 to help you establish and track your regular cleaning schedule 69 1442 1 4 UV100E ULTRAVIOLET AIR TREATMENT SYSTEM UV LAMP CLEANING REMINDER SCHEDULE INSTALLATION DATE month ______ year M13516 Fig 1 Ultraviolet lamp cleaning reminder schedule A CAUTION UV Lamp Burn Hazard Harmful to bare skin Can cause severe burns Disconnect power 15 minutes before removing the ultraviolet lamp s IMPORTANT If the lamps in your model have external wires running along the glass surface be sure to avoid pulling on those wires To clean your lamps 1 2 3 Disconnect the power to your HVAC system Unplug your ultraviolet air treatment system cord from the electrical outlet and allow the lamps to cool for at least 15 minutes Rotate your lamp knob counterclockwise and gently pull the lamp knob to remove the lamp s Holding only the lamp knob wipe the lamp glass using a soft cloth with window cleaner applied to it Do not touch the lamp surface with your hands Use only the cloth To ensure that the lamp indicator continues to function use a moistened cotton swab to gently remove any dust that may have collected between the lamp light indicator on the base and the black lamp base 5 69 1442 1 UV100E ULTRAVIOLET AIR TREATMENT SYSTEM
7. he HVAC duct It is recommended that every month you verify that your ultraviolet lamp s are operating only by viewing through the lamp light indicator on the lamp knob Do not attempt to look into the duct at the illuminated lamp s 3 69 1442 1 UV100E ULTRAVIOLET AIR TREATMENT SYSTEM HOW YOU CAN MAINTAIN YOUR ULTRAVIOLET AIR TREATMENT SYSTEM Your should regularly clean your ultraviolet lamps to maintain your air treatment system And once every year you must remember to replace your ultraviolet lamps CAUTION Personal Injury Hazard Power supply can cause electrical shock Disconnect power supply before cleaning or replacing ultraviolet lamp s Do not open base unit or lamp knob there are no user serviceable components inside CAUTION Breakable Glass Hazard Can cause personal injury Be careful when inserting lamp s into lamp base Wear protective gloves when handling lamp s Cleaning Your Lamps Every Three Months Quarterly Q MERCURY NOTICE This device contains mercury in the sealed ultraviolet lamp s Do not place your used lamp s in the trash Dispose of properly Broken Lamp Cleanup Do not use a household vacuum Sweep debris phosphor glass into a plastic bag and dispose of properly Contact your local waste management authority for instructions regarding recycling and the proper disposal of old lamp s If you have questions call Honeywell Customer Assistance at 1 800 468 1502 L
8. he lamps to cool for at least 15 minutes 4 Rotate the lamp knob counterclockwise and gently pull the lamp knob to remove the lamp s 5 Insert the lamp into the base unit with the lamp light indicator at the eleven o clock position left of the raised button on the unit cover Do not touch the lamp surface with your hands 69 1442 1 6 UV100E ULTRAVIOLET AIR TREATMENT SYSTEM Continue lightly pushing in on the lamp while rotating it slowly counterclockwise This should cause the lamp to drop into the bottom of the lamp well Rotate the lamp clockwise until it snaps into place with the lamp light indicator aligned with the raised button on the unit cover A A WARNING UV Light Hazard Harmful to bare skin and eyes Can cause temporary or permanent loss of vision Never look at the lamps while illuminated Only view illumination by way of the light indicator located on the lamp knob To prevent exposure to ultraviolet light disconnect power to the ultraviolet air treatment system before servicing any part of the heating air conditioning system 8 Plug your ultraviolet air treatment system cord into the nearby 120 Vac electrical outlet 9 Verify that your ultraviolet lamp s are operating only by viewing through the lamp light indicator on the lamp knob Never look directly at your lamp s while illuminated 10 Reconnect the power to your HVAC system Table 1 Replacing Your Lamp s Unit Description Rep
9. lacement Lamps Wattage UV100E1001 Single Lamp UC100E1006 18W Return Air Unit UV100E1019 Dual Lamp UC100E1014 twin pack 36W Return Air Unit two lamps required UV100E1035 Coil Irradiation Unit UC100E1030 36W 7 69 1442 1 Five Year Limited Warranty Honeywell warrants this product excluding lamps to be free from defects in the workmanship or materials under normal use and service for a period of five 5 years from the date of purchase by the consumer If at any time during the warranty period the product is defective or malfunctions Honeywell shall repair or replace it at Honeywell s option within a reasonable period of time If the product is defective i return it with a bill of sale or other dated proof of purchase to the retailer from which you purchased it or ii package it carefully along with proof of purchase including date of purchase and a short description of the malfunction and mail it postage prepaid to the following address Honeywell Return Goods Dock 4 MN10 3860 1885 Douglas Dr N Golden Valley MN 55422 This warranty does not cover removal or reinstallation costs This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer Honeywell s sole responsibility shall be to repair or replace the product within the terms stated above HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS
Download Pdf Manuals
Related Search