Honeywell DOLPHIN 6000-QS User's Manual
Contents
1. Green Full completed charge Red Fast charge Orange Pre charge low battery status Orange Blinking Battery cannot be charged Off No battery fault or over temperature Charging Communication Cable Adapter Cable Host Device USB Connector Turning Device On Off To turn the Dolphin 6000 terminal on 1 Press and hold the Power button for 3 seconds To turn the terminal off press the Power button for 5 seconds 2 to shutdown Suspending Resuming Terminal To put the device into Suspend mode when the terminal is powered on 1 Press and release the power button 2 Toresume from the Suspend mode press and release the Power button ActiveSvnc Communication To svnchronize data e g e mail contacts and calendar between the terminal and the host workstation PC 1 ActiveSvnce version 4 5 or higher or Windows Mobile Device Center WDMC must be installed on your PC You can download the most current version of ActiveSync or WDMC from the Microsoft Web site http go microsoft com fwlink 7Linkid 147001 Note Dolphin terminals ship with ActiveSvnc alreadv installed ActiveSync on your Dolphin terminal works with WDMC on PCs running Windows Vista or Windows 7 and with ActiveSync on PCs running Windows 2 The Dolphin terminal and PC must be configured for the same communication type 3 Connect the terminal to the PC using a Dolphin peripheral2. Honeywell Dolphin 6000 Quick Start Guide Aller www honeywellaidc com pour le frangais Vai www honeywellaidc com per l italiano Fur Deutsch gehe zu www honeywellaidc com Ir www honeywellaidc com para espanol Para Portugu s acesse www honeywellaidc com br www honeywellaidc com Pro estinu jdi na www honeywellaidc com Pre sloven inu chod na www honevwellaidc com 1 8 www honevwellaidc com s 6000 05 Rev 5 11 Verifv that vour carton contains the following items Dolphin 6000 mobile terminal Main battery pack 3 7V Li ion AC power supply Quick Start Guide Note ordered accessories for vour terminal verifv that thev are also included with the order Be sure to keep the original packaging in case vou need to return the Dolphin terminal for service Front Panel Front Speaker Indicator LED Volume Control Buttons 0 fey Picture Video Button Navigation Keys SCAN Key 7 Blue FN Key Microphone p Connector Back Panel Laser Scan Engine Rear Speaker Stylus Tether Y 7 Camera Flash Lanvard Slot 1 Co Color Camera SIM Card Battery Door gt lt Socket MicroSD Memory A T Card Socket Battery Door Latch 29
3. aidc com Patents For patent information please refer to www honeywellaidc com patents Limited Warranty Refer to www honeywellaidc com warranty_information for your product s warranty information Disclaimer Honeywell International Inc HII reserves the right to make changes specifications and other information contained in this document without prior notice and the reader should in all cases consult HII to determine whether any such changes have been made The information in this publication does not represent a commitment on the part of HII HII shall not be liable for technical or editorial errors or omissions contained herein nor for incidental or consequential damages resulting from the furnishing performance or use of this material This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be photocopied reproduced or translated into another language without the prior written consent of HII 2011 Honeywell International Inc All rights reserved Web Address www honeywellaidc com
4. alling Card op 5 6 Power down the terminal Unlock and remove the batterv door Remove the batterv Slide the latch toward the top of the terminal to unlock the SIM card Lift the SIM card latch Insert the SIM card into the SIM card socket Note Make sure the interface on the card is 10 11 connected to the SIM card interface in the socket align the corner of the card with the corner of the socket Close the SIM card latch Lock the SIM card latch bv sliding the latch toward the bottom of the terminal Install the batterv Install and lock the batterv door Power on the terminal Using the Scan Engine Point the aiming beam at a bar code The aiming beam must align with the bar code for the best results Holding the terminal between 4 10 inches 10 25 cm from a bar code is recommended Note The touch panel displav can be activated bv using the stvlus included with the terminal or vour finger To activate the displav open a file or select a menu use the tip of the stvlus to tap the touch panel displav or gentiv press the touch panel with vour finger 1 Start gt Demos gt Scan Demo Note You may activate the Vibrate option by selecting Start gt Demos gt Scan Demo gt Setup gt Vibrate The device vibrates each time a bar code is decoded 2 Point the Dolphin terminal at the bar code 3 Project the aiming beam by pres
5. kev Alphanumeric Kevboard OOTO oXsa Installing the Battery Pack A Ensure all components are drv prior to mating terminals batteries with peripheral devices Mating wet components mav cause dam age not covered by the warranty The Dolphin 6000 is shipped with the batterv packaged separatelv from the terminal Perform the following steps to install the batterv 1 Slide the latch to unlock the batterv door 2 Open the batterv door 3 Insert the battery into the battery well with the contacts facing the front of the unit 4 Re install the battery door Note Install the batterv door before powering the terminal 5 Connect the terminal to one of the Dolphin 6000 charging peripherals to charge the batterv pack A We recommend use of Honeywell Li lon battery packs Use of any non Honeywell battery may result in damage not covered by the warranty Removing the Battery Pack Perform the following steps to remove the battery 1 Slide the latch to unlock the battery door 2 Open the battery door 3 Remove the battery by lifting the tab on the battery Charging the Dolphin Dolphin terminals ship with the battery significantly discharged of power Charge the battery pack with a Dolphin charging device for a minimum of 4 hours before initial use HomeBase AUX Battery Well AUX Battery Charge 2 State LED HomeBase Back Panel Serial Port USB Port DC Power Jack HomeBase Battery Well LED Indicators
6. sing and holding the SCAN key 4 Center the aiming beam over the bar code For optimum perfor mance avoid reflections by scanning the bar code at a slight angle To decode stacked bar codes e g PDF417 slowly move the beam up or down over the code 5 When the bar code is successfully decoded the terminal LED flashes green and the terminal beeps The bar code information is entered into the application in use Aiming Beam The aiming beam is narrower when you hold the terminal closer to a bar code and the aiming beam is wider when you hold it farther from the bar code The aiming beam must be aimed closer to symbologies that have smaller bars or elements mil size The aiming beam must be aimed farther from symbologies that have larger bars or elements mil size rt Using the Color Camera 1 Tap Start gt Pictures amp Videos Calor Camara Camera 2 Point the camera lens at an SS amera object 3 Adjust the position of the 1 era lens to make sure that the 12199 Butt object is showing on the 5 4 Press the Picture Video but Ven ton on the side of the terminal to take a picture Technical Assistance Contact information for technical support product service and repair can be found at www honevwellaidc com User Documentation For localized versions of this document and to download the User s Guide go to www honeywell
7. to initiate communication For additional information on ActiveSync or Windows Mobile Device Center visit www microsoft com AN We recommend use of Honevwell peripherals power cables and power adapters Use of anv non Honevwell peripherals cables or power adapters cause damage not covered the warrantv Installing Memorv Card op Ic 10 11 12 13 14 15 16 Power down the terminal Unlock and remove the batterv door Remove the batterv Slide the latch toward the top of the terminal to unlock the SIM card Lift the SIM card latch to reveal the SIM card Remove the SIM card to reveal the memorv card latch Unlock the memory card latch by sliding the latch away from the serial number label located in the battery well Lift the latch to expose the MicroSDHC socket Remove and discard the SD card blank and replace it with the SD card you are installing Insert a MicroSD or MicroSDHC card into the socket aligning the corner on the card with the corner of the socket Close and lock the memory card latch by slid ing the latch toward the serial number label If you want to install a SIM card insert it into the SIM card socket see Installing a SIM Card Close and lock the SIM card latch by sliding the latch towards the bottom of the terminal Install the battery Install and lock the battery door Power on the terminal Inst
Download Pdf Manuals
Related Search