HASBRO Royal Naboo Starship Answering Machine 88-306 User's Manual
Contents
1. If the equipment is determined to be malfunctioning its use should be discontinued until the problem has been corrected Current FCC Regulations specify that any direct connections to a telephone company line be done using only standard phone jacks and plugs that meet FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If the equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encourage to try to correct the interference by one or more of the following measures Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help If you experience trouble with this equipment please contact the following address and phone number for information on obtaining service or repairs Company2. Tiger Electronics Ltd Repair Dept Address 980 Woodlands Parkway Vernon Hills IL 60061 U S A Tel No 847 913 8100 90 DAY LIMITED WARRANTY Tiger Electronics Inc Tiger warrants 1 to the original consumer purchaser of this product that the product will be free of defects in material or workmanship for 90 days from the date for original purchase This warranty does not cover damages resulting from accident negligence improper service or use or other causes not arising out of defects in materials or workmanship During this 90 day warranty period the product will either be repaired or replace at Tiger s option without charge to the purchaser when returned with proof of the date of purchase to either the dealer or to Tiger Product returned to Tiger without proof of date of purchase or after the 90 day warranty period has expired but prior to one year from the original date or purchase will be repaired or replace at Tiger s option for a service fee of 35 00 Payment must be by check or money order payable to Tiger Electronics Ltd The foregoing states the purchaser s sole and exclusive remedy for any breach of warranty with respect to the product All products returned must be shipped prepaid and insured for loss or damage to Tiger Electronics Ltd 980 Woodlands Parkway Vernon Hills Illinois 60061 U S A The product should be carefully packed in the original box or other packing materials sufficient to avoid
3. off and a beep tone will be heard The display should read OFF and then 0 To Turn On the Answering System Press the On Off button the LED will be turned on and a beep tone will be heard The display should read On and then 0 Record Your Outgoing Message OGM Your Answering System has the capability to hold one 60 second OGM To Record Your OGM 1 Press and hold the RECORD button for 2 seconds until a beep tone is heard and the display reads A1 2 Speak clearly into the microphone from 6 to 8 inches away and the display will count up Press STOP when you have finished your message A beep tone will be heard The Answering System will play back your OGM and then the display should read A1 To Insert Sound Effects into Your OGM Press any of the three sound effects keys while recording your outgoing message to insert phrases into your message You may insert as many as time allows Watch the display to keep track of your remaining time CHECKING YOUR OGM AND DISPLAY To check the OGM 1 Press and release the RECORD button a beep tone is heard and display reads A1 Checking the Message display The Message Display provides a lighted digital readout to let you check the number of ICM and system s status at a glance Following are examples of how the display might look Display reads 0 Answering System is On but there is no message Display reads 08 There are eight messages in the Answering System Display r
4. separately replaceable primary battery When inserting batteries into this product the proper polarity or direction must be observed Reverse insertion of batteries can cause charging and it may result in leakage or explosion Applies to products employing more than one separately replaceable primary battery Remove the battery from this product if the product will not be used for a long period of time several months or more since during this time the battery could leak in the product Discard a dead battery as soon as possible since a dead battery is more likely to leak in a product Do not store this product or the battery identified for use with this product in high temperature areas Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting Batteries should be stabilized at room temperature prior to use after cold storage oo microphone SFX Buttons o 37 Speaker Stop Repeat Volume eet barton a Control AC Adaptor Record Comedion button On off Clock Answering button button System Messag m Line Jack button Paro Telephone Connection Jack Speaker Speaker Microphone Message button Skip button Record outgoing message on your Answering System Press to retrieve incoming messages Press to skip forward to hear the next message during playback and for day time a
5. AGES 7 amp UP MODEL 88 306 883060001IWT1 03 OW NER S MANUAL INSTALLATION AND OPERATING INSTRUCTION TOEP n EAE EF EA ETES PESE 0 The Royal Naboo Starship Answering Machine is a replica of the ship used by the dignitaries of Naboo when they travel on official business Incorporated into the ship s design is a full feature digital answering machine with three sound effect keys that play five phrases of actual character speech from the movie allowing you to play them or record them into your outgoing message SPECIAL FEATURES This Digital Answering System uses the latest technology to provide you with a high performance tool Your new Digital Answering System includes the following special features Fully Digital Answering System Record and receive your messages on a digital voice chip for excellent sound quality and reliability Sound Effects 3 sound effect keys play 5 phrases of actual character speech Pre recorded Outgoing Message OGM Automatically answer calls with the pre record message if no personal outgoing message is recorded Personal Outgoing Message Record your own message up to 60 seconds in length Add one of the character phrases to your message for even more fun Extra long recording capacity Provides 14 minutes of digital message recording capacity Day Time Stamping Day and time of the ICM will be announced at the end of each message Instant Message Playback Messages will play back instant
6. ION DO NOT MIX OLD AND NEW BATTERIES DO NOT MIX ALKALINE STANDARD OR RECHARGEABLE BATTERIES BATTERY INSTALLATION SHOULD BE DONE BY AN ADULT NON RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE TOY BEFORE BEING CHARGED IF REMOVABLE RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED UNDER ADULT supervision IF REMOVABLE ONLY BATTERIES OF THE SAME OR EQUIVALENT TYPE AS RECOMMENDED ARE TO BE USED BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY EXHAUSTED BATTERIES ARE TO BE REMOVED FROM THE TOY THE SUPPLY TERMINALS ARE NOT TO BE SHORT CIRCUITED install the batteries Remove the battery compartment lid by loosening the screw with a screw driver Insert 5 pieces of button cell into the battery compartment with correct polarities Slide the battery compartment lid into the end slot then press it down and tighten the screw with a screwdriver CHOKING HAZARD SMALL PARTS NOT FOR CHILDREN UNDER 3 YEARS 5 x LR44 OR G13A CLOCK SETTING g This system incorporates a Day Time stamp feature that lets you know exactly when a call or message is received The clock is preset at SUNDAY 12 00 AM by the factory Therefore you must set the clock after powering up your system To set the clock 1 Press and shows 1 id the CLOCK button for 2 seconds You will hear a voice prompt SUNDAY and the message display 2 refers to Mo
7. NCE Parent should examine the unit and adaptor periodically in case there is any damage the toy must not be used until that damage has been properly repaired Clean the unit with a soft damp cloth Please do not put the unit in direct sunlight or near any source of heat Please remove the batteries if you won t be using the unit for a long period of time Do not use any chemical solvent to clean the unit Don t spill anything on the unit For indoor use only Do not immerse in water ONAN AWN IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment basic safety precautions should always be followed to reduce the risk of fire electric shock or injury to persons including the following 1 Read and understand all instructions 2 Follow all warnings and instructions marked on the product 3 Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 4 Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool 5 Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product 6 Slots and openings in the cabinet and the back or bottom are provided for ventilation and to protect it from overheating These openings must not be blocked or covered Ventilation slots should never be bl
8. damage during shipment Include a complete written description of the defect a check if product is beyond the 90 day warranty period and your printed name address and telephone number THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR OBLIGATE TIGER IN ANY WAY ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE NINETY 90 DAY PERIOD DESCRIBED ABOVE IN NO EVENT WILL TIGER BE LIABLE FOR ANY SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM POSSESSION USE OR MALFUNCTION OF THIS TIGER PRODUCT Some states do not allow limitations as to how long an implied warranty lasts and or exclusions or limitations of incidental or consequential damages so the above limitations and or exclusions of liability may not apply to you This warranty gives you specific rights and you may also have other rights which vary form state to state Lucasfilm Ltd amp TM All rights reserved Used under authorization TIGER ELECTRONICS LTD TM amp 1999 Tiger Electronics Ltd All rights reserved 980 Woodlands Parkway Vernon Hills Illinois 60061 U S A TM amp 1999 Tiger Electronics UK Ltd All rights reserved Belvedere House Victoria Avenue Harrogate North Yorkshire HG1 1EL England www tigertoys com PRINTED IN CHINA
9. de Call your system and wait for the OGM Press the button when your OGM is played Enter your PIN SECURITY CODE after the tone Upon successful entry the system will say YOU HAVE NO MESSAGES or YOU HAVE X MESSAGES and prompt you with the Help Menu Pun To record outgoing message press 1 To monitor room press 3 To play memo press 4 To play all messages press 5 To play new messages press 6 To delete all messages press star 7 To stop functions press 8 To play the message menu press 0 If you press 0 message play menu will be announced To repeat message press 4 To skip message press 6 To delete message press 7 To stop play press 8 Note this remote comment will not be announced To record OGM press 1 To record MEMO press 3 To change CBT press 4 To change security code press 6 To erase all messages press 7 To end of remote operation press Note If you press the Touch Tone button by mistake during remote operation press 8 to erase the pervious comment PROBLEM SOLVING GUIDE No sound during ICM playback or call monitoring Adjust the speaker volume control Cannot record an outgoing message OGM Make sure you press and hold the OGM button for 2 seconds until the message display counts up The OGM changed after a power failure Backup batteries were not installed or need replacing Answering System takes calls on the wrong numb
10. djustment Press to record OGM Press to turn answering system On and Off and pause during message playback Press to repeat the same message during playback Record button On Off button Repeat button Clock button Press to announce the day time and to change clock setting mode Erase Press and delete all ICM Stop Press to stop message play or clock setting Illuminated digital display shows the number of recorded message and indicates system status SFX Buttons Press to generate through the speaker or record sound effect into your OGM Speaker Volume Control Set Speaker Volume AC Adaptor Connection Jack connect to AC adaptor Telephone Connection Jack Connect to telephone Answering System Line Jack Connect into your house telephone jack Battery Compartment For storing the 5x1 5V LR44 or G13A button cell used for memory back up to save messages in the event of power failure Fig 1 If you wish to place your answering machine on a tabletop insert the clear table mount peg into the square slot located on the underside of the unit Slide the peg forward into the slot to secure Fig 1 Fig 2 If you wish to mount the answering machine on the wall position the bracket as shown in the illustration Using the screws supplied fasten to the main unit to secure Fig 2 GETTING STARTED Connecting your Answering System J 2 3 Carefully remove your Answering System from its shipping cart
11. eads FU Answering System s 14 minute recording capacity is full and there are messages waiting In this instance all subsequent calls will be answered but no messages will be recorded AUTOMATIC CALL TERMINATION When a caller is leaving a message there are certain conditions when the Answering System will terminate the call 1 If the duration of the call exceeds 1 minute in length 2 If the caller pauses is silent for 8 seconds or more while leaving a message 3 If the answering machine s 14 minutes recording capacity becomes full Note If the recording capacity becomes full the display will flash four times with FU and then display the no of messages LISTENING TO YOUR MESSAGES If you have two messages press the MESSAGE button a voice spram t YOU HAVE Two MESSAGES will be heard and the Answering System will play back the messages The message display will read the number of each message during playback To Pause Message Playback Message playback will pause by pressing the M ESSAGE button The display should read PS To Stop Message Playback Message playback will stop by pressing the STOP button To Skip Message Playback Message playback will skip by pressing the SKIP button To Repeat Message Playback Message playback will repeat by pressing the REPEAT button To Erase Message Press and release the ERASE button during message playback will erase your message To Erase All Messages Pr
12. electrical storm There may be a remote risk of electric shock from lightning 15 Do not use the telephone to report a gas leak in the vicinity of the leak SAVE THESE INSTRUCTIONS BATTERY SAFETY To 10 11 PUNE HEOSNOM 0 1 12 13 14 15 16 17 Message Display reduce the risk of fire or personal injury read and follow these instructions Use only the following type and size of battery 5 x 1 5V LR44 Button Cell Do not dispose of the battery in a fire It may explode Check with local codes for possible special disposal instruction Do not open or mutilate the battery Released electrolyte is corrosive and may cause damage to the eyes and skin It may be toxic if swallowed Exercise care in handling batteries to prevent shorting the battery with such conducting materials as rings bracelets and keys The battery or conductor may overheat and cause burns Do not attempt to recharge the battery identified for use with this product The battery may leak corrosive electrolyte or explode Do not attempt to rejuvenate the battery identified for use with this product by heating it Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin When replacing batteries all batteries should be replaced at the same time Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery ies Applies to products employing more than one
13. er of rings Extension phones operating on the same line of your Answering System weaken the signal received by the system This may cause your answering system to take longer to answer Answering System does not record ICM Make sure the message Display is not showing FU CARE AND MAINTENANCE Treat this product as you would any fine electronic equipment Keep your telephone Answering System away from sources of excessive heat and moisture Keep liquids from spilling onto or into any of your Telephone Answering System components Periodically clean the exterior surface by wiping with clean cloth Do not use solvents abrasive glass cleaners etc These may scratch the surface and damage the external finish of your equipment Do not let the cords become knotted or twisted Never open the telephone Answering System housing Locate your telephone Answering System in a safe place Place it on a solid flat surface where its cords will be out of the way and where it is not likely to be knocked off FCC REQUIREM ENTS Federal Communications Commission Requirements This equipment complies with Part 68 of FCC Rules A label on the Base Unit of this equipment contains among other information the FCC Registration Number and the Ringer Equivalence Number REN for this equipment You must upon request provide this information to your telephone company Sop Whe The REN also is useful in determining the quantity of devices that you may connect
14. erload wall outlets and extension cords since this can result in the risk of fire or electric shock 11 Never push objects of any kind into this product through cabinet slots since they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product 12 To reduce the risk of electric shock do not disassemble this product Take it to a qualified serviceman when service or repair work is required Opening or removing covers may expose you to dangerous voltages or other risks Incorrect re assembly can cause electric shock when the appliance is subsequently used 13 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged or frayed B If liquid has been spilled into the product C If the product has been exposed to rain or water D If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation E If the product has been dropped or the cabinet has been damaged F If the product exhibits a distinct change in performance 14 Avoid using a telephone other than a cordless type during an
15. ess and hold the ERASE button for 2 seconds the display should read ES All messages will be erased A beep tone will be heard and the display should show 0 To Save All Messages If you have erased all messages by mistake press and hold the ERASE button for 2 seconds again The display will show SA and erased messages will be saved after a long beep tone The message display will show the number of messages recorded Pin Security amp Call Breakthrough CBT Codes The PIN security code is the code you use to get access to your system when you are away CBT code allows callers to alert you to answer their call This allows you to avoid answering calls that you are not expecting The factory preset PIN security code and CBT are 159 and 267 respectively To change the PIN Security Code and CBT code PIN Security code Press and hold the SKIP button for 2 seconds a beep tone is heard and the display reads an original Security code SC 1 5 _ 9 1 Press the SKIP and REPEAT button until you choose the 1st digit 2 Press the On Off button once to enter the 1st digit Display should read 5 Press the SKIP and REPEAT button until you choose the 2nd digit 3 Press the On Off button once to enter the 2nd digit Display should read _ 9 Press the SKIP and REPEAT button once until you choose the 3rd digit 4 Press the On Off button once to enter the 3rd digit Note If no key is pressed within 8 seconds t
16. he setup procedure will be aborted CBT code 1 Press and hold the REPEAT button for 2 seconds a beep tone is heard and the display reads an original security code Cc 2 6 _ 7 2 Press the SKIP and REPEAT button until you choose the 1st digit 5 Press the On Off button once to enter the 1st digit Display should read 6 Press the SKIP and REPEAT button until you choose the 2nd digit 6 Press the On Off button once to enter the 2nd digit Display should read _ 7 Press the SKIP and REPEAT button once until you choose the 3rd digit 7 Press the On Off button once to enter the 3rd digit Note If no key is pressed within 8 seconds the setup procedure will be aborted Power Failure Security The memory of the system will be protected during an AC power failure if the 5x1 5V or G13A button cells are installed After power resumes the system will return to its previous state If there is no cell installed or the cells were dead once AC power resumes all memory will be erased You have to re program all settings like Date Time OGM PIN Security and CBT codes REMOTE OPERATION Remote Operation through Touch Tone Phone You can operate your system remotely from any Touch Tone phone to Turn the Answering System On and Off Play back ICM Save and erase ICM Record a new OGM Use Call Breakthrough Change of your PIN Security and CBT Access to your Answering System using the Remote Security Co
17. ly unlike conventional audiocassette tape systems which require rewinding Instant Skip amp Repeat Message Skip to next message and repeat a message instantly during playback Multiple Remote Features Control all functions of the Answering System On Off message playback skip repeat and erase message from a remote touch tone phone Also change OGM and codes by remote control Call Breakthrough Alert people in your home to answer your remote telephone call Memory Backup saves all messages in the event of power failure when optional 5x1 5V LR44 button cell batteries are installed CONTENTS Care and Maintenance Important Safety Instructions Battery Safety Location and Function Wall or Table Mount Assembly Getting Started Installing the Batteries Setting the Clock Answering System Operation Preparing for use Turning the Answering System On and Off Recording Your Outgoing Message OGM Checking Your Outgoing Message and Display Listening to your Message To Pause Message playback To Skip Message playback To Repeat Message playback To Erase Message To Erase all Messages To Save all Messages Pin Security amp Call Breakthrough CBT Codes Power Failure Security Remote Operation Remote Operation through Touch Tone Phone Access to your Answering System using the Remote Security Code Other Information Problem Solving Guide Care and Maintenance FCC Requirements Automatic Call Termination CARE AND MAINTENA
18. nday 3 refers to Tuesday and so on 2 Press the FORWARD button or the REPEAT button until display shows 4 which refers to Wednesday A voice prompt WEDNESDAY will be heard 3 Press the CLOCK button once to enter the day WEDNESDAY and you will hear a voice prompt TWELVE AM with 4 the display shows 12 which guides you to the setting of the hour Press the FORWARD buttons or the REPEAT buttons until the display shows 10 Voice prompt TEN AM will be heard Press the CLOCK button once to enter the hour 10 and you will hear a voice prompt OH with the display showing 00 which guides you to the setting of the minutes 6 Press the FORWARD button or the REPEAT button until the display shows 30 A voice prompt THIRTY will be heard 7 Press the CLOCK button once to enter the minute 30 you will hear a voice prompt WEDNESDAY TEN THIRTY AM Please note that the clock will start functioning once the system is powered up As long as the system is powered up with battery or AC power the clock will function ANSWERING SYSTEM OPERATION Prepare fai use It is important that you record the OGM before operating the Answering System Otherwise the default OGM will be announced PLEASE LEAVE YOUR MESSAGE AFTER THE TONE Turning the Answering System On and Off When the Answering System is On the display will show the 0 and the LED is on To Turn Off the Answering System Press the On Off button the LED will be turned
19. ocked by placing the product on a bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register This product should not be placed in a built in installation unless proper ventilation is provided 7 This product should be operated only from the type of power source indicated on the label If you are not sure of the type of power supply to your home consult your dealer or local power company 8 If provided with a grounded type attachment plug This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug If provided with a polarized attachment plug This product is equipped with a polarized line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug still does not fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 9 Do not allow anything to rest on the power cord Do not locate this product where the cord will be damaged by persons walking on it 10 Do not ov
20. on If there is any visible damage do not attempt to operate this equipment Return it to place of purchase Check to be sure that you have all items that come with this answering system You should have the answering system AC adaptor standard telephone line cord wall mounting bracket clear table mount and Owner s Manual Insert one end of the telephone line cord into the line jack marked LINE on the rear side of the Answering System and the other end into the house telephone jack Connect the telephone line cord of your telephone to the telephone connection jack marked TEL on the rear side of the Answering System Insert the small plug on the end of the AC adaptor into the jack marked POWER on the rear side of the Answering System Note Use only with a Class 2 power Source Input 120V A C 60Hz Output 9V A C 4VA Plug the AC adaptor into a standard 120V AC wall outllet A beep will be heard The message display will count up from 0 to 15 A beep will be heard and the display will read 0 and CL alternatively Lift the handset of your telephone and confirm that you have a dial tone If you do not hear a dial tone review steps 3 through 6 INSTALLATION OF BATTERY The system uses 5x1 5V LR44 or G13A button cells as backup power for the digital memory to prevent loss of messages during power failure When the display reads LO you should install or replace with new button cells To i JA 2 3 TO ENSURE PROPER FUNCT
21. to your telephone line and still allow all of these devices to ring when your telephone number is called In most areas but not all the sum of the RENs for all devices connected to one line should not exceed five 5 0 To be certain of the number of devices that you may connect to your line you should contact your local telephone company If your equipment should cause harm to the telephone network the telephone company may temporarily disconnect your service If possible they will notify you in advance that temporary discontinuance of service may be required However when advance written notice is not possible the telephone company may temporarily discontinue service without notice if such action is necessary under the circumstances The telephone company may make changes in its communication facilities equipment operations or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations of the Federal Communications Commission Do not attempt to repair or modify this equipment Changes or modifications not expressly approved by the party responsible for its compliance could void the user s authority to operate the equipment This equipment should not be used on coin telephone lines Connection to party line service is subject to state tariffs If trouble is experienced disconnect this equipment from the telephone line to determine if it is causing the malfunction
Download Pdf Manuals
Related Search