Harbor Freight Tools Solar LED Flagpole Light Product manual
Contents
1. including all text under subheadings therein before set up or use of this product 5 Slide the Clamps around the flagpole at the desired height making sure that the Spotlight faces the flag and that the Solar Panel Cover is in direct sunlight Tighten the Clamps until the Light is securely fastened to the flagpole Loosen the Knobs and adjust the Light and Solar Panel as desired Tighten the Knobs Slide the Switch to ON The Solar Light is now set to work Sunlight will recharge the Batteries during daylight hours and light will turn on at night Item 60555 Battery Replacement Replace the rechargeable batteries at least every 12 months 1 Loosen the Clamps and remove the Light from the flagpole Slide the Switch to OFF a NOTICE Use care when removing Solar Panel Cover so as to avoid pulling on the wire between the Battery Housing and the Spotlight Solar Panel Cover AA NiCd Battery Remove the screws Remove the Solar Panel Cover from the Battery Housing Remove and properly recycle old Batteries NI CD BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY Do not short incinerate or open batteries Install two new fully charged AA NiCd batteries making sure the follow the indicated polarity Place the Solar Panel Cover back onto the Battery Housing and attach it with screws Reinstall the Light onto the flagpole Parts List and Diagram Part Description Note Some2. parts are listed and shown for illustration purposes only and are not available individually as replacement parts pgo Item 60555 For technical questions please call 1 800 444 3353 Page 3 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND INSTALLATION DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Record Serial Number Here Note If product has no serial number record month and year of purchase instead Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or in
3. 800 444 3353
4. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference 3 LED ALUMINUM amp STAINLESS STEEL SOLAR FLAGPOLE LIGHT Specifications Battery Type 2 AA NiCd included Charge Time Visit our website at http www harborfreight com Email our technical support at tech harborfreight com Pole Mounting 9 3 4 L x 4 3 8 W x 2 3 4 T When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 3353 as soon as possible AWARN ING Copyright 2012 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Important Safety Information Installation Pr
5. directly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011
6. ecautions 1 Install only according to these instructions Improper installation can create hazards Wear ANSI approved safety goggles and heavy duty work gloves during installation Keep installation area clean and well lit Use Precautions A 1 Do not hang anything from or on light This product is not a toy Do not allow children to play with or near this item Use as intended only Remove the screws Remove the Solar Panel Cover from the Battery Housing Remove the tab at the end of the batteries so the light can function NOTICE Be careful that the wire connecting the Solar Panel Cover is not pulled and disconnected 3 Page 2 Place the Solar Panel Cover back onto the Battery Housing and attach it with screws Loosen the screws on the two Clamp Supports and open the Clamps For technical questions please call 1 800 444 3353 Keep bystanders out of the area during installation Do not install when tired or when under the influence of alcohol drugs or medication Verify Pole Clamps are securely tightened Do not use if Clamps are damaged Inspect before every use do not use if parts are loose or damaged Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement Installation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
Download Pdf Manuals
Related Search