Harbor Freight Tools Adjustable Height Heavy Duty Workstation Product manual
Contents
1. ICENTRAL MACHINERY HEAVY DUTY WORK STATION Wr 46725 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2001 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications 20 1 8 W x 17 3 4 D x 3 4 T inches rable Hetnt ost nes nen 15 5 16 W x 13 1 8 D x 1 8 T inches 19 1 2 W x 17 3 16 D x 1 8 T inches Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using tool basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this tool 1 2 Keep work area clean Cluttered areas invite injuries Observe work area conditions Do not use machines or power tools in damp or wet locations Don t expose to rain Keep work area well lighted Do not use electrica2. ISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 46725 Page 6 REV 07 03 Assembly Drawing Page 7 SKU 46725
3. aintenance should be performed regularly by a qualified technician Secure tool to table Tool must be securely clamped or mounted to table top for safe operation Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be under stood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SKU 46725 Page 3 Unpacking When unpacking check to make sure that all the parts are included Refer to the Parts List and Assembly Drawing at the end of this manual If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual as soon as possible Assembly Refer to the Assembly Drawing on page 7 during this procedure 1 Assemble Two Legs 8 to one Lower Short Frame 7 and two Lower Long Frames 6 by threading Screws 12 with a Washer 15 Refer to illustrations E and F on the Assembly Drawing Note that a Washer is placed under every Screw Tighten securely using a large Phillips screwdriver Screws 12 pi Washers 15 Leg 8 PVC Feet 11 2 Place the PVC Feet 11 on the bottom of each Leg 3 Assemble the Short Middle Frame 5 and two Long Middle Frames 4 to the Legs 8 just assembled Depending on the desired table height also mount the Height Adjuster 9 on the
4. l objects such as tools Caution Maximum Weight Capacity 1 000 Lbs dead load Do not exceed this maxi mum weight capacity Caution Only use normal sized table top equipment on this Work Station Oversized or overweight equipment can damage and possibly collapse the Work Station l 2 3 Maintenance Periodically check and tighten all Screws and Nuts on the Work Station assembly Store the Work Station in a clean and dry location When moving do not drag the Work Station Left and carry SKU 46725 Page 5 REV 07 03 Parts List Item Description ty Ps Frame Short Middle 2 o Frame Longton 2 7 _ Frame Sto Lower 2 eho f o HeightAduster P10 Connector Bracket Magnetic Strip 11 3 4 300 mm NOTE Some parts are listed and shown for illustra tion purposes only and are not available individually as replacement parts PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBU TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL R
5. lly powered tools in the presence of flammable gases or liquids Keep children away Children must never be allowed in the work area Do not let them handle machines tools or extension cords Store idle equipment When not in use tools must be stored in a dry location to inhibit rust Always lock up tools and keep out of reach of children Do not force tool It will do the job better and more safely at the rate for which it was intended Do not use inappropriate attachments in an attempt to exceed the tool capacity Use the right tool for the job Do not attempt to force a small tool or attachment to do the work of a larger industrial tool There are certain applications for which this tool was designed Do not modify this tool and do not use this tool for a purpose for which it was not intended Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Protective electrically non conductive clothes and non skid footwear are recommended when working Wear restrictive hair covering to contain long hair SKU 46725 Page 2 10 11 12 13 14 15 16 Use eye and ear protection Always wear ANSI approved impact safety goggles Wear a full face shield if you are producing metal filings or wood chips Wear an ANSI approved dust mask or respirator when working around metal wood and chemical dusts and mists Do not overreach Keep proper footing and balance at all times Do not reach ove
6. outside of the Legs Use Screws 13 and Washers 15 Tighten securely Refer to illustrations A B C and G on the Assembly Drawing Height Adjuster 9 _ Short Middle Frame 5 Long Middle Frame 4 SKU 46725 Page 4 REV 07 03 Assembly the other two Legs with the Short Middle Frame 5 and the Short Lower Frame 7 Use Screws 12 through the Height Adjuster Screws 13 through Short Lower Frame 7 and Washers 15 Tighten securely Slide the Middle Wood Plate 2 into the Long Middle Frames 4 Slide the Lower Wood Plate 3 into the Long Lower Frames 6 Attach the Leg subassembly done in step 4 to the extending Long Middle Frames 4 and the Long Lower Frames 6 Use Screws 12 through the Height Adjuster Screws 13 through Short Lower Frame 7 and Washers 15 Tighten securely Place the Wood Table Top 1 upside down on the floor exposing the mounting holes Mount the Connector Brackets 10 using Screws 16 Tighten securely Place the completed frame assembly Height Adjuster brackets facing down over the Connector Brackets and secure with Screws 13 and Washers 15 Tighten securely Refer to illustration D on the Assembly Drawing Turn the completed Work Station over so that it stands on its feet Stick the Magnetic Strips 17 and 18 to the Long Middle Frame 4 and the Short Middle Frame 5 These magnetic strips can be used to hold light meta
7. r or across running machines Maintain tools with care Keep tools sharp and clean for better and safer performance Follow instructions for lubricating and changing accessories Inspect tool cords periodically and if damaged have them repaired by an authorized technician The handles must be kept clean dry and free from oil and grease at all times Stay alert Watch what you are doing use common sense Do not operate any tool when you are tired Check for damaged parts Before using any tool any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment and binding of moving parts any broken parts or mounting fixtures and any other condition that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use the tool if any switch does not turn On and Off properly Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this tool Approved accessories are available from Harbor Freight Tools Do not operate tool if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not operate the tool Maintenance For your safety service and m
Download Pdf Manuals
Related Search