Harbor Freight Tools 95797 User's Manual
Contents
1. SOLAR CANDLE GARDEN LANTERN exes 95797 ASSEMBLY AND OPERATION INSTRUCTIONS Due to continuing improvements actual product may differ slightly from the product described herein Distributed Exclusively by f HARBOR FREIGHT Any es TOOLS mane 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http Awww harborfreight com TO PREVENT SERIOUS INJURY READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE Copyright 2007 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions or replacement parts please call 1 800 444 3353 SPECIFICATIONS Materials Solar Light Black Injection Molded PP Plastic Clear Injection Molded Polystyrene Lens White Injection Molded PP Plastic Faux Candle Shepherd s Hook Formed Steel Tubing Black Powder Coated Finish Polycrystaline Solar Cells Auto ON OFF switch 1 LED Bulb included Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference SAFETY WARNINGS AND PRECAUTIONS WARNING When using tool bas2. The Power Switch 10 is on the underside of the Top Assembly To have the light turn on at night locate the Power Switch 18 and switch to the ON position You can turn the Solar Candle Garden Lantern Power Switch 18 OFF if you do not want the light to turn on at night See Figure 2 Replace the Top Assembly by connecting it to the Lantern matching up the notches and twisting clockwise for closure Small Loop 1 S Steel Tube 19 Middle Steel Tube 22 Lower Steel Tube 23 Ground Stake 16 FIGURE 3 5 The Shepherd s Hook is screwed together with three threaded shafts 19 22 and 23 Hook inserts into the top of the Ground Stake 16 and the Lantern hangs from the SKU 95797 For technical questions please call 1 800 444 3353 Page 4 hook by a Small Loop 1 at the top of the light See Figure 3 and Assembly Drawing on page 7 6 Choose the location for the Solar Candle Garden Lantern and stick the Shepherd s Hook and Ground Stake 16 into the ground avoiding any underground wiring or plumbing Be sure to choose a location that gets plenty of sunshine during the day and is not near a porch or street light at night See Figure 3 7 If the Solar Candle Garden Lantern stops working or is not holding a charge for a long enough period replace the batteries with identical rechargeable NiCd AA batteries See directions below for battery replacement Small Loop 1 FIGURE 4 Note The Solar C
3. qualified technician 10 Properly disponse of any used batteries Dispose of the used batteries properly according to the solid Waste disposal regulations in your community 11 Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator UNPACKING When unpacking check to make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual as soon as possible OPERATING INSTRUCTIONS NOTE For additional information regarding the parts listed in the following pages refer to the Assembly Diagram on page 7 1 Before using you need to charge the batteries You can do this by placing the Solar Lantern in the sunlight The Lantern will take approximately 8 hours of sunlight to charge Be sure the four Solar Panels 2 are in full sunlight Solar Panels 2 Top Assembly Plastic Ring 11 2 After the Batteries 8 are charged remove the Top Assembly See Figure 1 by twisting counterclockwise off the Plastic Ring 11 and lifting it off the Lantern SKU 95797 For technical questions please call 1 800 444 3353 Page 3 Plastic Ring 11 Battery 8 Power Switch 18 FIGURE 2 3
4. andle Garden Lantern can be removed from the Shepherd s Hook and Stake and used as a table Lantern See Figure 4 BATTERY REPLACEMENT 1 Turn the Top Assembly of the Solar Candle Garden Lantern slightly counterclockwise Remove the assembly from the top of the Solar Candle Garden Lantern See Figure 1 on page 3 2 Take assembly off the Lantern being careful not to disturb the wires and the internal components See Figure 2 on page 4 3 Remove the used Batteries 8 and dispose of them properly according to the Solid Waste Disposal regulations in your community Replace with new Rechargeable SKU 95797 For technical questions please call 1 800 444 3353 Page 5 NiCd Batteries 8 The polarity of the batteries is marked inside the Battery Case 10 Be careful of the internal components and do not disturb the wires 4 Once the batteries are in place match up the notches and return the Top Assembly Twist clockwise onto the Plastic Ring 11 Then tighten Note Test that the Top Assembly and Lantern are secure before hanging on the Shepherd s Hook MAINTENANCE 1 WARNING Make sure the Power Switch 18 of the Solar Candle Garden Lantern is in its OFF position before performing any inspection maintenance or cleaning procedures 2 BEFORE EACH USE inspect the general condition of the Solar Candle Garden Lantern Check for loose screws cracked or broken parts damaged electrical wiring and any other condition that ma
5. ic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this tool 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions Keep work area well lighted 3 Keep children away Children must never be allowed to handle this product This is not a toy Keep out of their reach 4 Use the right product for the job Do not attempt to force this product to do the work of a larger Lantern There are certain applications for which this product was designed Do not modify this product and do not use this product for a purpose for which it was not intended 5 Use eye protection Always wear ANSI approved impact safety goggles during set up 6 Do not overreach Keep proper footing and balance at all times T Stay alert Watch what you are doing Use common sense when positioning this Lantern in the ground 8 Avoid any hidden pipes or wiring in the ground Be aware of where you are inserting the Ground Stake 16 of the Solar Candle Garden Lantern 9 Check for damaged parts Before using any tool any part that appears damaged should be carefully checked to determine that it will operate properly and perform its REV 07d SKU 95797 For technical questions please call 1 800 444 3353 Page 2 intended function Any broken parts or mounting fixture that may affect proper operation should be properly repaired or replaced by a
6. y affect its safe operation Do not use damaged equipment 3 Clean the outside of the Solar Candle Garden Lantern with a clean and damp cloth Never use abrasive cleaners they will damage the unit You may use a mild detergent Never submerge the Solar Candle Garden Lantern in water or any other liquid PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 95797 For technical questions please call 1 800 444 3353 Page 6 PARTS LIST Part Description ty 2 SolarPanel 4 6 emys 8 Batey J2 9 SpringSheet J4 Part Description ty E 14 PlasticSheet 4 ASSEMBLY DIAGRAM e a re 19 Note Some parts are listed and shown for illustration purposes only and are not available individuall
7. y as replacement parts SKU 95797 For technical questions please call 1 800 444 3353 Page 7
Download Pdf Manuals
Related Search