Harbor Freight Tools 68754 User's Manual
Contents
1. EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 33532. IMPORTANT INSTRUCTIONS In this manual on the labeling and all other information provided with this product A messages that follow this symbol to avoid possible injury or death DANGER indicates a hazardous situation which if not avoided will result in death or serious injury AWARNING WARNING indicates a hazardous situation which if not avoided could result in death or serious injury ACAUTION CAUTION used with the safety alert symbol indicates a hazardous situation which if not avoided could result in minor or moderate injury NOTICE is used to address practices not related to personal injury CAUTION CAUTION without the safety alert symbol is used to address practices not related to personal injury This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety Page 2 11 12 13 14 For technical questions please call 1 800 444 3353 injury to persons including the following Read all instructions before using this heater This heater does not include a tip over switch It must be monitored at all times during use to prevent tipping and fire especially if pets or children are in the house This heater is hot when in use To avoid burns do not let bare skin touch hot surfaces Use handles when moving this heater Keep combustible materials such as furniture pillows bedding papers clothes and curtains at least 3 feet 0
3. 9 m from the front of the heater and keep them away from the sides and rear Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended Always unplug heater when not in use Do not operate any heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner Return heater to authorized service facility for examination electrical or mechanical adjustment or repair Do not use outdoors This heater is not intended for use in bathrooms laundry areas and similar indoor locations Never locate heater where it may fall into a bathtub or other water container Do not run cord under carpeting Do not cover cord with throw rugs runners or similar coverings Arrange cord away from traffic area and where it will not be tripped over To disconnect heater turn controls to off then remove plug from outlet Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater To prevent a possible fire do not block air intakes or exhaust in any manner Do not use on soft surfaces like a bed where openings may become blocked A heater has hot and arcing or sparking parts inside Do not use it in areas where gasoline paint or flammable liquids are used or stored Use this heater only as described in this manual A
4. shock Disconnect the Power Cord Plug from the power source and allow the heater to thoroughly cool before making any adjustments changing accessories or storing this heater Such preventive safety measures reduce the risk of burns When servicing this heater use only identical replacement parts Follow instructions in the Inspection Maintenance and Cleaning section of this manual Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury People with pacemakers should consult their physician s before use Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure 23 WARNING Handling the cord on this product will expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling California Health amp Safety Code 25249 5 et seq The warnings precautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SAVE THESE INSTRUCTIONS Symbology no 5 Read the manual before set up and or use WARNING marking concerning Risk of Fire Do not cover ventilation ducts Keep f
5. Electric Fireplace Heater Item 68754 AWARNING Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 800 444 3353 as soon as possible Visit our website at http www harborfreight com Copyright 2011 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included af i When using electrical appliances basic Specifications precautions should always be followed to reduce the risk of fire electric shock and Electrical Input 120V 60Hz 12 7 A Heat Settings 750W 1500W Light Bulb Type 40W Type B 10 Candelabra US 218805 Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference
6. ct s Serial Number Here Note Note and are not available individually as replacement parts Page 6 For technical questions please call 1 800 444 3353 Part Description 12 2 PowerCord 1 3 2 Power Cord 1 Switch 3 If product has no serial number record month and year of purchase instead Some parts are listed and shown for illustration purposes only SKU 68754 Assembly Diagram SKU 68754 For technical questions please call 1 800 444 3353 Page 7 Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES
7. extension cord with less length or greater size a lower AWG indicates increased size d Check for any obstruction in the heater s vents If an obstruction is found unplug the heater and wait for it to cool completely Then carefully remove the obstruction If the above remedies do not solve the problem take the heater to a qualified service technician for diagnosis and repair please call 1 800 444 3353 Page 5 Parts List and Assembly Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Parts List Part Description Qty 5 7 Blower A4 J JL 1 40W Type B 10 Candelabra Bulb Socket Bulb Socket 5 6 7 Blower 8 9 Record Produ
8. her condition that may affect its safe operation 2 Wipe the exterior surfaces of the heater occasionally with a slightly moist cloth not dripping wet Dry the case thoroughly with a soft dry cloth before operating the heater WARNING Do not allow water to run into the interior of the heater as this could create a fire or electric shock hazard SKU 68754 For technical questions Changing the Light Bulb 1 Use the Door Handle 5 to open the Door 2 2 Loosen the 2 screws at the front of the Log 13 inside the heater 3 Carefully lift the Log up far enough to access the 40W Type B 10 Candelabra Bulb 10 See Figure C Ty 1j 7 Bulb 10 Log d3 3 i Figure C Bulb Replacement 4 Replace the burned out Bulb using a new 40W Type B 10 Candelabra Bulb WARNING TO PREVENT SERIOUS INJURY Do not use a different type of light bulb or one with output greater than 40 watts to prevent fire 5 Reinstall the Log using the two screws Troubleshooting If the heater does not operate a Make sure that the heater is plugged in b Ensure that the outlet used is powered and that the circuit breaker is not tripped c Eliminate the use of an extension cord if possible Otherwise use an
9. lammable objects away WARNING marking concerning Risk of Electric Shock Properly connect power cord to appropriate outlet For technical questions please call 1 800 444 3353 Page 3 Assembly Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product AWARNING TO PREVENT SERIOUS INJURY FROM BURNS Turn the Switches 21 of the heater off to O position unplug the heater from its electrical outlet and allow it to cool completely before assembling moving or making any adjustments to the heater Note For additional information regarding the parts listed in the following pages refer to Parts List and Assembly Diagram on pages 6 and 7 1 Install one Leg 1 on each corner of the Housing 3 using 3 bolts and washers as shown in Figure A Housing 3 Figure A Leg Installation 2 Make sure all legs are installed securely before use Do not use with any legs missing bent crooked or loose Page 4 For technical questions please call 1 800 444 3353 Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product Area Precautions AWARNING TO PREVENT SERIOUS INJURY FROM BURNS Turn the Switches 21 of the heater off to O p
10. ll restart once the temperature falls SKU 68754 General Operating Instructions 1 Turn the Switches 21 of the heater off to O position to prevent accidental operation Then plug the heater into a grounded 120V electrical outlet 2 Adjust the controls as desired see Figure B Then close the Door 2 3 After use to prevent accidents turn the Switches 21 of the heater off to O position and disconnect its power cord WARNING Do not leave the heater unattended while switched on 4 WARNING Allow heater to cool completely before cleaning or storage Once cool clean then store the heater indoors out of children s reach Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician AWARNING TO PREVENT SERIOUS INJURY FROM BURNS Turn the Switches 21 of the heater off to O position unplug the heater from its electrical outlet and allow it to cool completely before assembling moving or making any adjustments to the heater TO PREVENT SERIOUS INJURY AND FIRE FROM HEATER FAILURE Do not use damaged equipment If abnormal noise or vibration occurs have the problem corrected before further use Cleaning Maintenance and Lubrication 1 BEFORE EACH USE inspect the general condition of the heater Check for loose hardware misalignment or binding of moving parts cracked or broken parts damaged electrical wiring and any ot
11. ny other use not recommended by the manufacturer may cause fire electric shock or injury to persons SKU 68754 15 16 17 18 19 20 21 22 SKU 68754 Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire However if you have to use an extension cord the cord shall be 14 AWG minimum size and rated not less than 1 524 watts The output of this heater may vary and its temperature may become intense enough to burn exposed skin Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns Heater service must be performed only by an authorized service representative Service or maintenance performed by unqualified personnel could result in a risk of fire or injury This double insulated heater is equipped with a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install a polarized outlet Do not change the plug in any way Connect to properly grounded outlets only Do not abuse the Power Cord Never use the Power Cord to carry this heater or pull the Plug from an outlet Keep the Power Cord away from heat oil or sharp edges Replace damaged Power Cords immediately Damaged Power Cords increase the risk of electric
12. osition unplug the heater from its electrical outlet and allow it to cool completely before assembling moving or making any adjustments to the heater 1 Place Heater on dry hard stable floor away from combustible materials DO NOT USE ON CARPET 2 Supervise children closely when near heater 3 Keep pets away from heater Controls Note Controls are located inside the Door 2 Use the Door Handle 5 to open the Door Turbo Switch Flame Power Switch Thermostat Knob Flame Power Switch Switch to position to turn the unit on and enable the flame effect Heating Switch Intensity Turbo Heating Flame Figure B Control Panel Flame Knob Adjusts the intensity of the flame effect while the Flame Power Switch is in the I position Does not effect the heat output Heating Switch Switch to position while the Flame Power Switch is in the position to turn on the blower and the heating element The heating element will turn off once the temperature triggers the thermostat but the fan will continue operating Turbo Switch Switch to position while both the Flame Power Switch and the Heating Switch are in the position to set the heating element to high heat Thermostat Knob Adjusts the temperature at which the heating element shuts off while the Heating Switch is in the position The fan and flame effect will continue even if the heating element shuts off The heating element wi
Download Pdf Manuals
Related Search