Harbor Freight Tools 67118 User's Manual
Contents
1. high setting 5 Adjust the Thermostat 5 to the desired setting between MIN minimum and MAX maximum 6 The Power Light 3 turns on when the Power Switch is set to LO or HI 7 When finished using the Heater Fan turn the Power Switch to Off and unplug the unit Safety Feature This unit is equipped with a thermal overload protection feature which shuts off the unit if the temperature rises above the highest setting If the unit suddenly turns off turn the Power Switch off unplug the unit wait for it to cool completely Once the Heater has Page 5 Page 6 cooled completely to continue use remove any objects that may be on or adjacent to the heater plug the unit in then turn on the Power Switch WARNING Wait for the unit to cool down completely before storing Storing or moving this heater while hot or plugged in could result in fire or severe burns For technical questions please call 1 800 444 3353 INSPECTION AND MAINTENANCE TO PREVENT AWARNING SERIOUS INJURY FROM ACCIDENTAL OPERATION OR ELECTRIC SHOCK Before appliance inspection or maintenance make sure the appliance s power switch is turned off the cord is unplugged and the unit has cooled completely TO PREVENT SERIOUS INJURY FROM APPLIANCE FAILURE Do not use damaged appliances If abnormal noise smoke or vibration is detected have the problem corrected before further use All maintenance and service should be perfo2. the risk of fire electric shock and injury to persons including the following Read all instructions before using this heater This heater is hot when in use To avoid burns do not let bare skin touch hot surfaces If provided use handles when moving this heater Keep combustible materials such as furniture pillows bedding papers clothes and curtain at least 3 feet 0 9 m from the front of the heater and keep them away from the sides and rear Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended Do not place the heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by the heater Always unplug the heater when not in use Always plug heaters directly into a wall outlet receptacle Never use with an extension cord or re locatable power tap outlet power strip Do not operate heater with a damaged cord or plug or after the heater malfunctions has been dropped or damaged in any manner Discard heater or take to a qualified technician for examination and or repair 10 11 12 13 14 For technical questions please call 1 800 444 3353 Do not run cord under carpeting Do not cover cord with throw rugs runners or similar coverings Do not route cord under furniture or appliances Arrange cord away from traffic area and where it will not be tripped over Che
3. CERAMIC HEATER FAN iee 1167118 SET UP AND OPERATING INSTRUCTIONS Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our website at http www harborfreight com Read this material before using this product Failure to do so can result in serious injury SAVE THIS MANUAL Copyright 2009 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technical questions or replacement parts please call 1 800 444 3353 ACAUTION SAVE THESE Read Rules for Safe Operation and INSTRUCTIONS Instructions Carefully Safety Symbols AWARNING In this manual on the labeling and all other information 1 To reduce the risk of fire or electric provided with this product shock do not use this Heater with any solid state speed control This is the safety alert device symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death 2 This appliance has a polarized plug one blade is wider than the other To reduce the ri
4. all 1 800 444 3353 Part Description Qty 12 Rear Bracket Page 7 CIRCUIT DIAGRAM Power switch Thermal limiter Pilot light Thermostat Record Product s Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Page 8 For technical questions please call 1 800 444 3353 SKU 67118
5. ck your heater cord and plug connections a Faulty wall outlet connections or loose plugs can cause the outlet or plug to overheat Be sure the plug fits tight in the outlet b Heaters draw more current than small appliances overheating of the outlet may occur even if it has not occurred with the use of other appliances c During use check frequently to determine if your plug outlet or faceplate is HOT If so discontinue use of the heater and have a qualified electrician check and or replace the faulty outlet s This heater is not intended for use in bathrooms laundry areas and similar indoor locations Never locate heater where it may fall into a bathtub or other water container Do not use outdoors To disconnect heater first turn controls to off then remove plug from outlet Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage to the heater To prevent a possible fire do not block air intakes or air outlet in any Page 3 20 ra Page 4 manner Do not use on soft surfaces like a bed where openings may become blocked 22 A heater has hot and arcing or sparking parts inside Do not use it in areas where gasoline paint or flammable liquids are used or stored Use this heater only as described in this manual Any other use not recommended by the manufacturer may cause fire electric shock or injury t
6. d by operator SAVE THESE INSTRUCTIONS SKU 67118 SPECIFICATIONS Bice tical 120 V 60 Hz Requirements Heat Range LO 1000W HI 1500W Off Settings Adjustable Heat levels Low High Heat Min Max HOUSEHOLD USE ONLY UNPACKING When unpacking make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at 1 800 444 3353 as soon as possible Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference A OPERATION Read the ENTIRE RULES FOR SAFE OPERATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product Note For additional information regarding parts listed refer to Assembly Diagram at back of manual SKU 67118 For technical questions please call 1 800 444 3353 T Thermostat Power o Switch 6 Power Light 3 Figure 1 1 Make sure the Power Switch 6 is turned to Off 2 Place Heater Fan on a sturdy dry surface away from any combustible materials 3 Plug into a 120V electrical outlet 4 Turn the Power Switch to the LO low or HI
7. o persons It is normal for the plug to feel warm to the touch However a loose fit between the receptacle and plug may cause overheating and distortion of the plug Contact a qualified electrician to replace a loose or worn outlet The output of this heater may vary and its temperature may become intense enough to burn exposed skin Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns This product is not a toy Keep it out of reach of children Children in the area of the Heater must be closely supervised to insure that they do not come in contact with the Heater Maintain labels and nameplates on the Heater If unreadable or missing contact Harbor Freight Tools for a replacement WARNING Handling cord on this product will expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling For technical questions please call 1 800 444 3353 California Health amp Safety Code 25249 5 et seq CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT The warnings precautions and instructions discussed in this instruction manual cannot cover all conditions and situations that may occur It must be understood by operator that common sense and caution are factors which cannot be built into this product but must be supplie
8. rmed by a qualified technician BEFORE EACH USE inspect condition of the Heater Fan Check for loose screws misalignment or binding of moving parts cracked or broken parts and any other condition that may affect its safe operation AFTER USE occasionally use compressed air to blow dust out of vents Wipe external surfaces with clean cloth AWARNING If the supply cord of this Heater Fan is damaged it must be replaced only by a qualified service technician SKU 67118 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYERASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO PARTS LIST amp ASSEMBLY DIAGRAM Part Description Qty 1 6 Power Switch 1 8 Power Switch Unit 1 9 Brace o O S 1 SKU 67118 For technical questions please c
9. sk of electric shock this plug is intended to fit into a polarized outlet only one way If the plug does not fit fully in the outlet A DANGER DANGER indicates reverse the plug If it still does not a hazardous fit contact a qualified electrician situation which if not Do not change the plug in any way avoided will result in death or Do not attempt to defeat this safety serious Injury feature WARNING AWARNING _ 3 Do not leave Heater running while indicatesa unattended hazardous situation which if not avoided could result in death or serious injury RULES FOR SAFE CAUTION used OPERATION ACAUTION with the safety 1 Never insert fingers pencils or any alert symbol indicatesa other object through Front or Rear hazardous situation which if Blade Guards not avoided could result in minor or moderate injury 2 Disconnect Heater when moving it from one location to another NOTICE NOTICE is used to NOTICE address practices 3 Be sure Heater is on a stable surface not related to personal injury when operating to avoid overturning CAUTION without 4 DONOT use Heater in window Rain CAUTION the safety alert may create electrical hazard symbol is used to address practices not related to personal injury Page 2 For technical questions please call 1 800 444 3353 SKU 67118 SKU 67118 IMPORTANT INSTRUCTIONS When using electrical appliances basic precautions should always be following to reduce
Download Pdf Manuals
Related Search