Harbor Freight Tools 3_In_1 Product manual
Contents
1. eai 3 KNOW BIOWEN 11 nace seus A E dete Negus 12 Operations Sah Mel te ee bv da cs 15 Maintenance casa cee a A LL 18 TFOUBIESNOOUMG 0 19 Parts List and Exploded View ano 20 ce 23 SPECIFICATIONS 12 AMP ELECTRIC BLOWER MULCHER 120 AC only 60Hz 12 0 Amps Two Speeds 230 150 Air VOIUMG fein sae eo ea oe ee A 375 CFM 12 1 Collection bag 1 2 Bushel 218549 2 For technical questions please call 1 888 866 5797 Item 62337 IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury READ THESE INSTRUCTIONS BEFORE USING THE BLOWER Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids gases or dust Power tools create sparks which may ignite the dust or fumes Avoid body contact with grounded surfaces such as pipes radiators ranges and refrigerators There is an increased risk of electric shock if your b2. Do not put any object into openings Do not use with any opening blocked keep openings free of dust lint hair and anything that may reduce air flow Check the work area before each use Remove all objects such as rocks broken glass nails wire or string which can be thrown or become entangled in the machine Do not pull or carry by cord do not use cord as a handle close a door on a cord or do not pull cord around sharp edges or corners Do not run appliance over cord Keep cord away from heated surfaces Do not unplug by pulling on cord To unplug grasp the plug not the cord Do not handle plug or appliance with wet hands Do not use with damaged cord or plug If appliance is not working as it should has been dropped damaged left outdoors or dropped into water return it to a service center If the power supply cord is damaged it must be replaced only by the manufacturer or by an authorized service center to avoid risk Service on the product must be performed by qualified repair personnel only Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product In a double insulated appliance two systems of insulation are provided instead of grounding No grounding means is provided on a double insulated appliance nor should a means for grounding be added to the appliance Servicing a double insulated appliance requires extreme care and knowledg
3. Use rakes and brooms to loosen debris before blowing In dusty conditions slightly dampen surfaces Conserve water by using power blowers instead of hoses for many lawn and garden applications including areas such as gutters screens patios grills porches and gardens Watch out for children pets open windows or freshly washed cars and blow debris safely away Clean up after using blowers and other equipment Dispose of debris appropriately NOTE Please ensure that the Mulch Vacuum Gate is completely closed and locked Page 16 For technical questions please call 1 888 866 5797 Item 62337 OPERATION AIR VENTS Never cover air vents Keep them free from obstructions and debris They must always remain clear for proper motor cooling AWARNING To avoid serious personal injury do not wear loose fitting clothing or articles such as scarves strings chains ties etc that could get drawn into the air vents To make sure long hair does not get drawn into the air vents tie back long hair OPERATING AS A BLOWER Note Unit will not run unless Gate and Blower Tube latched Hold the blower firmly Sweep from side to side with the nozzle several inches above the ground or floor Slowly advance the unit keeping the accumulated pile of debris in front of you Most dry blowing operations are better suited to low speeds rather than high High speed blowing is a better way to move heavier items lik
4. damage Store the unit in a dry well ventilated area Store the unit out of the reach of children INSPECT EXTENSION CORDS Inspect all extension cords periodically Look closely for deterioration cuts or cracks in the insulation Inspect the connectors for damage Replace cords if defective or damaged Page 18 For technical questions please call 1 888 866 5797 Item 62337 TROUBLESHOOTING PROBLEM Unit will not blow or mulcher Unit will not start Item 62337 POSSIBLE CAUSE 1 Bag full 2 Blocked tube 3 Blocked impeller 4 Dirty bag 5 Torn bag 6 Bag unzipped 7 Unit unplugged Unit is unplugged 2 Power speed switch is in the OFF position 3 Defective power switch 4 Vac tubes are not correctly installed 5 Intake gate cover is not closed 6 Blower tube or bag assembly not correctly installed 7 House circuit may have tripped For technical questions please call 1 888 866 5797 SOLUTION Empty the bag Clear the blockage Clear the blockage Clean the bag Replace the bag Zip up the bag Plug into an outlet or an extension cord 1 Check cord to make sure it is plugged into an electrical outlet 2 Slide switch to high or low 3 Call techincal support 1 888 866 5797 4 Check vac tubes to ensure that they are allowing the switch to be engaged when correctly installed 5 Ensure that gate cover is fully closed and locked 6 Check blower
5. of California to cause cancer and birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints e Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles California Health amp Safety Code 25249 5 et seq 2 WARNING The cord of this product contains lead and or di 2 ethylhexyl phthalate DEHP chemicals known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling California Health amp Safety Code 25249 5 et seq SAVE THESE INSTRUCTIONS Page 6 For technical questions please call 1 888 866 5797 Item 62337 SYMBOLS Some of the following symbols may be used on this product Please study them and learn their meaning Proper inter pretation of these symbols will allow you to operate the product better and safer SYMBOL NAME DESIGNATION EXPLANATION Voltage 2 Hertz Frequency cycles per second W Watts Power erasana Rational speed at no load min Per Minute Revolutions strokes surface speed orbits etc per min
6. original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning
7. the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state Item 62337 For technical questions please call 1 888 866 5797 Page 23 POR TCASID 3491 Mission Oaks Blvd Box 6009 Camarillo CA 93011 1 888 866 5797
8. BLOWER TUB CONCENTRATOR NOZZLE INSTALLING BAG WITH SHOULDER HARNESS See Fig 5 Note Unit will not run unless Bag latched While standing in the operating position adjust the length to fit the operator s size Pull the tab to lengthen pull the strap to shorten Page 14 For technical questions please call 1 888 866 5797 Item 62337 OPERATION CONNECTING THE POWER CORD See Fig 6 1 Secure the extension cord to the motor housing using the notch at rear of blower This prevents accidental removal of the electrical cord 2 Plug the female end of the electrical cord into the receptacle at the back of the unit STARTING STOPPING THE BLOWER MULCHER See Fig 7 This unit is equipped with a three way OFF LOW HIGH switch Slide the switch forward to the first position for LOW speeds up to 150 MPH 241Kph Slide the switch forward to the second position for HIGH speeds to 230 MPH 370Kph Once the unit is plugged in stand in the operating position Slide the power speed switch to LOW or HIGH to start the unit To stop the unit slide the switch to OFF HOLDING THE BLOWER MULCHER Before operating the unit stand in the operating position Check for the following Operator is wearing proper clothing such as boots safety glasses or goggles ear hearing pro tection gloves long pants and a long sleeve shirt AWARNING To avoid serious personal injury wear goggles or s
9. ING CHECK EXTENSION CORDS BEFORE EACH USE IF DAMAGED REPLACE IMMEDIATELY NEVER USE TOOL WITH A DAMAGED CORD SINCE TOUCHING THE DAMAGED AREA COULD CAUSE ELECTRICAL SHOCK RESULTING IN SERIOUS INJURY ELECTRICAL CONNECTION This tool is powered by a precision built electric motor It should be connected to a power sup ply that is 120 volts 60 Hz AC only normal household current Do not operate this tool on direct current DC A substantial voltage drop will cause a loss of power and the motor will overheat If the product does not operate when plugged into an outlet double check the power supply FOR ALL DOUBLE INSULATED APPLIANCES Replacement Parts When servicing use only identical replacement parts Polarized Appliance Connections To reduce the risk of electric shock this appliance has a polarized plug one blade is wider than the other and will require the use of a polarized exten sion cord The appliance plug will fit into a polarized extension cord only one way If the plug does not fit fully into the extension cord reverse the plug If the plug still does not fit obtain a correct polarized extension cord A polarized extension cord will require the use of a polarized wall outlet This plug will fit into the polarized wall outlet only one way If the plug does not fit fully into the wall outlet reverse the plug If the plug still does not fit contact a qualified electrician to install the proper wall outlet Do not chan
10. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference POR TCATSID ELECTRIC BLOWER VACUUM MULCHER 8 ITEM 62337 Visit our website at http www harborfreight com REV 14k Email our technical support at productsupport harborfreight com When unpacking make sure that the product is intact and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2014 by Harbor Freight Tools All rights reserved 1 No portion of this manual any artwork contained herein may be reproduced Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included CONTENTS Specifications A A eae 2 Important Safety
11. afety glasses that comply with ANSI Z87 1at all times when operating this unit Wear a face mask or dust mask in dusty locations AWARNING To prevent serious personal injury or damage to the unit make sure the blower tube or the mulcher tubes and the bag are in place before operating the unit Item 62337 For technical questions please call 1 888 866 5797 Page 15 OPERATION OPERATING TIPS See Fig 8 The bag is installed and zipped closed when used as a mulcher Be sure the bag is zipped closed before operating the unit Assure the unit is not directed at anybody or any loose debris before starting the unit Verify that the unit is in good working condition Make sure the tubes and guards are in place and secure Always hold the unit with both hands when operating Keep a firm grip on both the front and rear handle or grips To reduce the risk of hearing loss associated with sound level s hearing protection is required Use the shoulder strap when using unit as a mulcher Operate power equipment only at reasonable hours not early in the morning or late at night when people might be disturbed Comply with times listed in local ordinances Usual recommendations are 9 00 am to 5 00 pm Monday through Saturday To reduce noise levels limit the number of pieces of equipment used at any one time To reduce noise levels operate power blowers at the lowest possible speed to do the job
12. e large debris or gravel OPERATING AS A MULCHER Note Unit will not run unless Bag and Vacuum Tube latched Hold the vac firmly tilting the mulcher tubes 2 4 in or 5 10 cm and use a sweeping action to collect light debris The debris will flow into the bag Items such as small leaves and twigs will be mulched as they pass through the fan housing For longer bag life and increased performance empty the bag often CLEARING A BLOCKED TUBE IMPELLER AWARNING To avoid serious personal injury be sure the unit is OFF and unplugged before clearing the impeller AWARNING To avoid serious personal injury always wear gloves to protect yourself from the impeller blades or other sharp objects 1 Slide the Power Speed switch down to the OFF position until the unit comes to a complete stop 2 Unplug the unit 3 Remove the blower tube or mulcher tubes and the bag 4 Carefully remove material blocking the tube or impeller Inspect the blades to ensure no damage has occurred Rotate the impeller blades by hand to ensure the blockage is completely cleared 5 Reinstall the blower tube or mulcher tubes and the bag 6 Plug the unit back into the power supply Item 62337 For technical questions please call 1 888 866 5797 Page 17 MAINTENANCE SERVICING DOUBLE INSULATED UNITS This unit is double insulated In a double insulated unit two systems of insulation are provided instead of grounding There is no groundi
13. e of the system and should be done only by qualified service personnel Replacement parts for a double insulated appliance must be identical to the parts they replace Not intended for commercial use Page 4 For technical questions please call 1 888 866 5797 Item 62337 SPECIFIC SAFETY RULES FOR BLOWER Make sure your extension cord is in good condition When using an extension cord be sure to use one heavy enough to carry the current your product will draw A wire gauge size A W G of at least 14 is recommended for an extension cord 50 feet or less in length If in doubt use the next heavier gauge The smaller the gauge number the heavier the cord An undersized cord will cause a drop in line voltage resulting in loss of power and overheating Do not point the blower nozzle in the direction of people or pets Never run the unit without the proper equipment attached Always ensure the blower tubes are installed When not in use blower should be stored indoors dry locked up place out of the reach of children Maintain tool with care Keep fan area clean for best and safest performance Follow instructions for proper maintenance Do not attempt to clear clogs from tool without first unplugging it Do not pull or carry by cord do not use cord as a handle or do not pull cord around sharp edges or corners Keep cord away from heated surfaces Do not unplug by pulling on cord To unplug grasp the
14. e technician For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair When servicing use only identical replacement parts AWARNING To avoid serious personal injury do not attempt to use this product until you read thoroughly and understand completely the operator s manual If you do not understand the warnings and instructions in the operator s manual do not use this product Call GREENWORKS customer service for assistance AWARNING The operation of any power tool can result in foreign objects being thrown into your eyes which can result in severe eye damage Before beginning power tool operation always wear safety goggles or safety glasses with side shields and when needed a full face shield We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields Always use eye protection which is marked to comply with ANSI 287 1 Page 8 For technical questions please call 1 888 866 5797 Item 62337 ELECTRICAL AWARNING THIS BLOWER VAC IS FOR OUTDOOR USE ONLY DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS GUIDELINES FOR USING EXTENSION CORDS USE THE PROPER EXTENSION CORD Make sure your extension cord is in good condition When using an extension cord be sure to use one of heavy enough gauge to carry the current your product will draw An undersized cord will cause overheating The table below shows the correct size t
15. ge the equipment plug extension cord receptacle or extension cord plug in any way Page 10 For technical questions please call 1 888 866 5797 Item 62337 KNOW YOUR BLOWER The safe use of this product requires an understanding of the information on the tool and in this operator s manual as well as a knowledge of the project you are attempting Before use of this product familiarize yourself with all operating features and safety rules See Fig 2 BLOWER TUBE The blower tube can be easily installed on the blower without any additional tools CORD RETAINER A convenient cord retainer helps keep the extension cord connection secure during blower operation MULCHER TUBES The mulcher tubes can be added without any additional tools to provide mulching and vacuum ing functionality 2 SPEED POWER SWITCH AUXILIARY HANDLE LOCK BUTTON BLOWER TUBE CONCENTRATOR NOZZLE MULCH VACUUM GATE MULCHER TUBES Item 62337 For technical questions please call 1 888 866 5797 Page 11 ASSEMBLY UNPACKING This product requires assembly AWARNING This new product has been shipped in a partially assembled condition as described below Carefully check the packing list below to ensure all items are included in the package the packing list describes all loose items that are not assembled to the product as shipped Do not operate the product if any packing list items are already assembled to your product when you unpack
16. it Call the customer service number below for assistance Operation of a product that may have been improperly pre assembled could result in serious personal injury Carefully remove the product and any accessories from the box Make sure that all items listed in the packing list are included Inspect the product carefully to make sure no breakage or damage occurred during shipping Do not discard the packing material until you have carefully inspected and satisfactorily operated the product If any parts are damaged or missing please call 1 888 866 5797 for assistance PACKING LIST Electric blower Blower tube e Mulcher tubes Bag Operator s Manual AWARNING If any parts are damaged or missing do not operate this product until the parts are replaced Failure to heed this warning could result in serious personal injury AWARNING Do not attempt to modify this product or create accessories not recommended for use with this product Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury AWARNING Do not connect to power supply until assembly is complete Failure to comply could result in accidental starting and possible serious personal injury Page 12 For technical questions please call 1 888 866 5797 Item 62337 ASSEMBLY ASSEMBLE AS A MULCHER See Fig 3 1 Slide the front and rear mulcher tubes
17. ng provided and no means of grounding should be added to this unit Extreme care and knowledge of the system is required when servicing a double insulated unit Service should be performed by qualified service personnel only Replacement parts for a double insulated unit must be identical to the parts they replace Refer any repairs to an authorized service dealer A double insulated unit is marked with the words double insulation or CLEANING THE UNIT AWARNING To avoid serious personal injury always turn the unit off and unplug it before cleaning or servicing Use a small brush to clean off the outside of the unit Do not use strong detergents household cleaners that contain aromatic oils such as pine and lemon and solvents such as kerosene as they can damage plastic housings or handles Wipe off any moisture with a soft dry cloth CLEANING THE BAG 1 Empty the bag after each use to avoid deterioration and obstructing air flow which will reduce the performance of the mulcher 2 Wearing eye protection and a dust mask clean the bag as needed Turn the bag inside out after initial emptying and vigorously shake out dust and debris 3 Wash the bag once a year more often if needed a Remove the bag Turn bag inside out Hang it up b 0 d Hose it down thoroughly e Leave it hanging to dry f Turn bag right side out and reinstall STORAGE Store the unit locked up to prevent unauthorized use or
18. nglement in any moving parts Wear heavy long pants boots and gloves Avoid loose garments or jewelry that could get caught in moving parts of the machine or its motor Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear Wear protective footwear that will protect your feet and improve your footing on slippery surfaces Item 62337 For technical questions please call 1 888 866 5797 Page 3 IMPORTANT SAFETY INSTRUCTIONS Do not force tool Use the correct tool for your application The correct tool will do the job better and safer at the rate for which it is designed Keep firm footing and balance Do not overreach Overreaching can result in loss of balance Turn off all controls before unplugging Avoid accidental starting Be sure the power switch is not on before plugging in Turn off power switch before unplugging Do not use tool if switch does not turn it on or off Any tool that cannot be controlled with the switch is dangerous and must be repaired not use with damaged plug If tool is not working as it should or has been dropped damaged left outdoors or dropped into water return it to an authorized service center Do not operate this unit when you are tired ill or under the influence of alcohol drugs or medication Do not operate in poor lighting Keep all parts of your body away from any moving parts and all hot surfaces of the unit
19. o use depending on cord length and nameplate ampere rating If in doubt use the next heavier gauge The smaller the gauge number the heavier the cord Ampere rating on tool faceplate MINIMUM GAUGE FOR EXTENSION CORDS AWG WHEN USING 120V ONLY Amp Rating Total Length of Cord in Feet meters More Than Not More Than 25 7 6 m 50 15 m 100 30 4 150 45 7 m 0 6 18 16 16 14 10 18 16 14 12 12 16 16 14 12 12 16 14 12 Not Recommended Make sure your extension cord is properly wired and in good electrical condition Always replace a damaged extension cord or have it repaired by a qualified technician before use Keep extension cords away from sharp objects excessive heat and damp or wet areas Use a separate electrical circuit for tools This circuit should not be less than 12 wire and should be protected with a 15 A time delayed fuse Before connecting the motor to the power line make sure the switch is in the OFF position and the electric current is rated the same as the current stamped on the motor nameplate Running at a lower voltage will damage the motor AWARNING KEEP THE EXTENSION CORD CLEAR OF WORKING AREA POSITION THE CORD SO THAT IT WILL NOT GET CAUGHT ON LUMBER TOOLS OR OTHER OBSTRUCTIONS WHILE YOU ARE WORKING WITH A BLOWER VAC FAILURE TO DO SO CAN RESULT IN SERIOUS PERSONAL INJURY Item 62337 For technical questions please call 1 888 866 5797 Page 9 ELECTRICAL AWARN
20. ody is grounded Don t expose power tools to rain or wet conditions Water entering a power tool will increase the risk of electric shock Do not expose to rain store indoors Do not handle plug or tool with wet hands Use outdoor extension cords marked W A W SW A SOW A STW A STOW A SJW A SJTW A or SUTOW A These cords are rated for outdoor use and reduce the risk of electric shock Never allow children to operate the equipment Never allow adults to operate the equipment without proper instruction Keep all bystanders children and pets at least 50 ft away Always wear safety glasses with side shields marked to comply with ANSI 287 1 Everyday glasses have only impact resistant lenses They are NOT safety glasses Following this rule will reduce the risk of eye injury Use face mask if operation is dusty Wear eye protection which is marked to comply with ANSI Z87 1 when operating this product Use extra care when cleaning on stairs Do not leave appliance plugged in Unplug from outlet when not in use and before servicing Use only as described in this manual Use only manufacturer s recommended attachments Use only identical manufacturer s replacement parts and accessories Use of any other parts may create a hazard or cause product damage Keep hair loose clothing fingers and all body parts away from openings and moving parts Secure long hair so it is above shoulder level to prevent enta
21. plug not the cord To reduce the risk of electrical shock do not expose to rain do not use on wet surfaces Store indoors If the power supply cord is damaged it must be replaced only by the manufacturer or by an authorized service center to avoid risk Save these instructions Refer to them frequently and use them to instruct others who may use this power tool If you loan someone this power tool loan them these instructions also WHILE OPERATING UNIT AS A BLOWER Never point the blower in the direction of people or pets or in the direction of windows Use extra caution when blowing debris near solid objects such as trees automobiles and walls OTHER SAFETY WARNINGS Be sure to secure the unit while transporting Store the unit in a dry area locked up to prevent unauthorized use or damage and stored ina high place out of the reach of children Never douse or squirt the unit with water or any other liquid Keep handles dry clean and free from debris Clean after each use See the Cleaning and Storage instructions Keep these instructions Refer to them often and use them to instruct other users If you loan someone this unit also loan them these instructions Item 62337 For technical questions please call 1 888 866 5797 Page 5 SPECIFIC SAFETY RULES FOR BLOWER 1 WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State
22. together until the lock button engages See fig 2 2 Pull the lock button forward to disengage the gate Hold the gate open See fig 3 1 3 Insert the wedged end clip of the mulcher tube into the rear clip See fig 3 2 Push the hooked end clip of the mulcher tube into the front clip See fig 3 3 Press the lock button back to engage the mulcher tube See fig 3 4 4 To remove mulcher tubes follow the steps 3 2 1 5 Insert the bag adaptor into the blower outlet Lock the bag adaptor with the lock button To re move the bag simply press lock button and remove bag see Fig 5 NOTE It may be necessary to remove the blower tube or mulcher tubes to clear a blocked tube or impeller AWARNING To prevent serious personal injury make sure the switch is in the OFF position it is unplugged and the impellers have stopped before attaching or removing tubes Note Unit will not run unless Vacuum Tube latched Item 62337 For technical questions please call 1 888 866 5797 Page 13 ASSEMBLY ASSEMBLE AS A BLOWER See Fig 4 Note Unit will not run unless Gate and Blower Tube latched 1 Slide blower tube forward until the notched areas on the blower housing click into the slots on the tube 2 Insert the concentrator nozzle onto the regular nozzle to lock Concentrator nozzle is used to increase air flow in tight areas flower beds under decks etc
23. tube or bag assembly to ensure that they are allowing the switch to be engaged when correctly installed 7 Check wall circuit breaker panel and reset if necessary Page 19 PARTS LIST Series Number 36409142 ine wih water proof 20 For technical questions please call 1 888 866 5797 Item 62337 EXPLODED VIEW Item 62337 For technical questions please call 1 888 866 5797 Page 21 NOTES Page 22 For technical questions please call 1 888 866 5797 Item 62337 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the
24. ute Wet Conditions Alert Do not expose to rain or use in damp locations Read The Operator s Manual To reduce the risk of injury user must read and understand operator s manual before using this product Eye Protection Wear eye protection when operating this equipment Safety Alert Precautions that involve your safety Long Hair Failure to keep long hair away from the air inlet could result in personal injury Loose Clothing Failure to keep loose clothing from being drawn into air intake could result in personal injury Keep Bystanders Away Keep all bystanders at least 50 ft away Blower Tubes Do not operate without tubes in place A we Item 62337 For technical questions please call 1 888 866 5797 Page 7 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation which if not avoided will result in death or serious injury WARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION Without Safety Alert Symbol Indicates a situation that may result in property damage SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified servic
Download Pdf Manuals
Related Search