Harbor Freight Tools 20 Watt Submersible Spotlight Product manual
Contents
1. Accessory by sliding it into long hangers the short hanger on the Base connecting at the F tab see Assembly Drawing on page 6 on the Case 5 See FIGURES 2 and 3 In this application the Spotlight will rotate to your desired angle B Set the four Rubber Suction 6 cups in the slots on the bottom of the Case 5 see Assembly Drawing on page 6 and set the unit directly on the bottom of the pond See FIGURE 3 C The circular band on the Long Hanger 7 fits around the shaft of the fountain See FIGURE 4 and the end of the Long Hanger 7 fits into the connection point on the Case 5 See FIGURE 3 Warning Hands and feet should be dry before plugging or unplugging in the line cord to a GFCI outlet 3 Run the cord with the Adapter 8 to the waterproof location with the GCFI outlet Plug in the unit FIGURE 3 Fixed with suction cups FIGURE 4 Attached to Fountain Jet Fountain Not Included Maintenance Note The unit must be unplugged whenever performing maintenance 1 Check the unit periodically making sure the Cover 1 is securely fastened 2 if the Bulb 4 burns out remove the Cover 1 the Lens 2 and the Seal Ring 3 Then gently pull and remove the old Bulb 4 Snap the two pins on the new Bulb 4 into the receptacle on the Case 5 Replace the Cover 1 the Lens 2 and the Seal Ring 3 See Assembly Drawing on page 6 SKU 47604 Page 5 Assembly Drawing Connec2. SUBMERSIBLE SPOTLIGHT 20 WATTS Model 47604 ASSEMBLY and OPERATING INSTRUCTIONS Visit our Web site at http Avww harborfreight com Copyright 2002 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications 2 1 8 W x 3 L x 2 Deep not waterproof weatherproof 15 power 2 OD x 1 11 16 ID Accessories Five Lenses Red Orange Green Blue and Clear Base for vertical and horizontal mounting Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using this product basic safety precautions should always be fol lowed to reduce the risk of personal injury and damage to equipment Read all instructions before using this tool 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions The Adapter 8 must be kept dry at all times Don t expose to rain Keep work area well lighted Do not use electrically pow
3. ered Adapters in the presence of flammable gases or liquids 3 Keep children away Children must never be allowed in the work area Do not let them handle Spotlight 4 Store idle equipment When not in use the Adapter must be stored in a dry location to inhibit rust Always lock up tools and keep out of reach of children 5 Use the right Spotlight for the job Do not attempt to force a small Spotlight to do the work of a larger industrial Spotlight There are certain applications for which this Spotlight was designed Do not modify this Spotlight and do not use this produt for a purpose for which it was not intended 6 Dress properly Protective electrically non conductive clothes and non skid rubber soled footwear are recommended when working Wear restrictive hair covering to contain long hair Use eye protection Always wear ANSI approved impact safety goggles Do not overreach Keep proper footing and balance at all times Do not reach over or across Spotlight or cables Do not reach into water to touch the Spotlight while it is plugged into an electrical outlet SKU 47604 Page 2 9 Maintain tools with care Inspect tool cords periodically and if damaged have them repaired by an authorized technician 10 Disconnect power Unplug adapter when not in use 11 Stay alert Watch what you are doing use common sense Do not assemble Spotlight when you are tired 12 Check for damaged parts Before using Spotlight any par
4. n Note Ground Fault Circuit Interruptor outlets are intended to add more safety when workin with electricity in wet areas They protect against electrical shock caused by a faulty appliance or worn plugs and cords The GFCI senses small changes in the current and will shut off power almost immediately Unpacking When unpacking check to make sure the parts listed on page 6 are included If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual as soon as possible FIGURE 1 Spotlight Set SKU 47604 Page 4 Operation Note When replacing bulbs or changing lenses unplug the unit and remove it from the water Note Before placing the unit in the water make sure you choose a location that has a GCFI outlet that is ina covered waterproof area within the distance of the product cord length 19 4 The Adapter 8 is not waterproof es 4 and must be kept dry at all times Note The Spotlight must always be completely submerged in water when in use Failure to submerge the entire unit will cause the Bulb 4 to overheat and fail Note Make sure the pond bottom surface you choose to use is flat and level 1 Choose which lens color you desire and unscrew the Cover 1 Place the Lens 2 on the Seal Ring 3 and replace the Cover 1 2 Set the Spotlight in the water by using one of three Smethods Connection point to short and A Set the Spotlight on the Base
5. t that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken parts or mounting fixtures and any other condition that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician 13 Guard against electric shock Prevent body contact with grounded surfaces such as pipes radiators ranges and refrigerator enclosures 14 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this tool Approved accessories are available from Harbor Freight Tools 15 Do not set up the Spotlight if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not assemble the Spotlight 16 Use proper size and type extension cord If an extension cord is required it must be of the proper size and type to supply the correct current to the tool without heating up Otherwise the extension cord could melt and catch fire or cause electrical damage to the tool This tool requires use of an extension cord of 0 to 10 amps capability up to 50 feet with wire size rated at 18 AWG Longer extension cords require larger size wire If you are using the tool outdoors use an extension cord ra
6. ted for outdoor use signified by WA on the jacket The Spotlight adapter must be used with a GCFI outlet Ground Fault Circuit Interruptor See page 4 17 Maintenance For your safety maintenance should be performed regularly by a qualified technician 18 Pacemaker safety warning People with pacemakers should consult with their physician s before using this product operation of equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker Warning Avoid shock Hands and feet should be dry before plugging or unplugging in the line cord to a GFCI outlet Caution The Spotlight is not suitable for use in swimming pools swimming ponds or other locations where persons could make bodily contact with the Submersible Spotlight Note Performance of this tool if powered by line voltage may vary depending on variations in local line voltage Extension cord usage may also affect tool performance Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be under stood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator SKU 47604 Page 3 Note Before using this Spotlight in conjunction with a pump or fountain not included make sure you read the entire instruction manual that came with the pump or fountai
7. tion tab for amp attaching to the lt 7 Short and Long Hanger Note Base and extra lenses not shown Parts List Seal Ring Bulb 7 8 Adapter o l Cord en 5 6 BA PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBU TOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 47604 Page 6
Download Pdf Manuals
Related Search