Harbor Freight Tools 2_in_1 Product manual
Contents
1. Keep bystanders out of the area during as sembly Do not assemble when tired or when under the influence of drugs or medication Use Precautions This product is not a toy Do not allow chil dren to play with or near this item Use for intended purpose s only Inspect before use do not use if product is damaged Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement This tool is designed to bend soft metal pipe or tubing such as copper or aluminum Do not attempt to bend hard metal pipe such as black iron pipe You may damage the tool Do not attempt to bend brittle materials such as glass or hard plastic Those materials may shatter and potentially cause injury Al ways wear ANSI approved safety impact eye goggles and heavy duty work gloves when using the Tube Bender 7 As the pipe or tubing is being bent there is a significant pinch hazard created Keep hands fingers feet and any item which may be injured or damaged away from the Tube Bender and hinge point areas of this tool when in operatoin ASSEMBLY amp OPERATION INSTRUCTIONS Read the ENTIRE IMPORTANT A SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product Assembly 1 Insert the Handle 4 through the Tube Hold er 1 Screw the Handle into the2. 444 3353 Page 3
3. Bitsburgh VETI 94623 2 IN 1 PIPE BENDER ASSEMBLY AND OPERATION Visit our website at http www harborfreight com SAVE THESE INSTRUCTIONS READ ALL PRECAUTIONS AND INSTRUCTIONS Copyright 2008 by Harbor Freight Tools All rights reserved No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this document may not be drawn proportionally Due to continuing improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included For technical questions or replacement parts please call 1 800 444 3353 SPECIFICATIONS Product Applications Designed for bending copper and aluminum pipe Pipe Size Capacity 1 2 to 7 8 Diameter tubing Construction Cast iron and steel tube Steel rollers Aluminum hardware UNPACKING When unpacking check to make sure that the item is intact and undamaged If any parts are missing or broken please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible IMPORTANT SAFETY INFORMATION Assembly Precautions Assemble only according to these instruc tions Improper assembly can create haz ards Revised Manual 10k 2 a Wear ANSI approved safety goggles and heavy duty work gloves during assembly Keep assembly area clean and well lit
4. odically lubricate the hinge points of the tool with a medium weight oil 3 Regularly wipe down and clean the tool to keep it in best condition 4 When not in use store the tool in a clean dry safe location out of reach of children and other unauthorized persons PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT Page 2 IN FACT THE MANUFACTURER AND OR DISTRIBUTOR Record Serial Number Here EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING Note No parts are available individually as replacement parts OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Note If product has no serial number record month and year of purchase instead PARTS LIST amp ASSEMBLY DIAGRAM 2 Tubing Bender 1 6 6e Bending bie 1 5 8 Bending Die 6 not shown 7 8 Bending Die 7 not shown SKU 94623 For technical questions please call 1 800
5. threaded hole of the Tubing Bender 2 by turning clockwise until tight See Figure A 2 Insert the Handle with Grip 5 into the Con necting Plate Assembly 3 See Figure A CONNECTING PLATE ASSY 3 HANDLE WITH GRIP 5 TUBE HOLDER 1 FIGURE A HANDLE 4 TUBING BENDER 2 Operation i Select the proper bending die 5 8 or 7 8 to suit the diameter of tubing you wish to bend See Figure B 2 Rotate the Handle with Grip 5 around the Tubing Bender 2 until it is in a straight line with the other Handle 4 See Figure B SKU 94623 For technical questions please call 1 800 444 3353 3 Insert the tubing along the Handle 4 Move the Tube Holder 1 to allow the tube to slide under it and position the Tube Holder 1 to hold the tube in place See Figure B 4 While holding the tube along the Handle 4 pull down on the Handle with Grip 5 The tube will be formed along the Tubing Bender 2 Continue pulling until the desired bend has been achieved from 0 to 180 degrees See Figure B 5 When completed remove the bent tube from the tool TUBE HOLDER HANDLE WITH GRIP PULL DOWN TO BEND TUBE FIGURE B HANDLE 4 TUBING BENDER 2 CONNECTING PLATE ASSY 3 bel DS 5 8 OR 7 8 BENDING DIE 6 7 TUBING NOT INCLUDED MAINTENANCE 1 Before each use inspect the Pipe Bender for bent or damaged components 2 Peri
Download Pdf Manuals
Related Search