Harbor Freight Tools 1_1/4 gal. Home and Garden Sprayer Product manual
Contents
1. Do not use the Sprayer while tired or under footing and balance at all times the influence of drugs alcohol or medication Proper footing and balance enable better A moment of inattention while operating the control of the tool in unexpected situations Sprayer may result in serious personal injury 5 Always wear eye protection Wear ANSI approved safety goggles Page 2 For technical questions please call 1 800 444 3353 Item 61280 61281 Use 1 Use only for water or water based fertilizers herbicides pesticides and sealers Do not use to spray combustible or corrosive chemicals 2 Release pressure in Tank by pulling up on the Pressure Release Valve before loosening or removing parts Contents are under pressure and may spurt forcefully 3 Do not point the Sprayer at yourself other people or animals 4 Do not allow access to treated areas by people or animals 5 Industrial applications must follow OSHA requirements 6 Make sure the liquid used in the Sprayer is not dirty or sandy Service 1 Have your Sprayer serviced by a qualified repair person using only identical replacement parts This will ensure that the safety of the tool is maintained 10 11 12 This product is not a toy Do not allow children to play with or near this item Use as intended only Inspect before every use do not use if parts are loose or damaged Before filling pull up on Pressure Release Valve to ensure that2. Tighten Wand Nut securely kg i B a Fy callie D A Nozzle F Ring Shoulder Ring not Wand Wand Trigger Strap holes shown Nut Handle Assembly Fi igure C Figure B Page 4 For technical questions please call 1 800 444 3353 Item 61280 61281 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product AWARNING Inspect Sprayer before use looking for damaged loose and missing parts If any problems are found do not use Sprayer until repaired Follow all guidelines regarding chemicals sprayed including MSDS instructions and EPA regulations Release pressure in Tank by pulling up on the Pressure Release Valve before loosening or removing parts Contents are under pressure and may spurt forcefully 1 Before filling pull up on Pressure Release Valve to ensure that it operates properly and does not stick 2 Making sure the Handle Assembly is all the way down into the Tank turn the Handle Assembly counterclockwise to loosen it then pull the Handle Assembly out of the Tank Figure D Handle Assembly 3 Pour the liquid through a strainer sold separately into the Funnel Top Note Fill the Tank no higher than Max fill line 4 Insert the Handle Assembly all the way down into the Tank and turn the Handle Assembly clockwise to tighten it securely 5 Pump the Handle to build u
3. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference HOME amp GARDEN SPRAYER GREENWOOD WITH 4 FOOT HOSE GREENWOOD GREENWOOD 61281 2 GALLON 61280 1 25 GALLON Visit our website at http www harborfreight com ITEMS 61280 61281 Email our technical support at tech harbortfreight com When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 800 444 3353 as soon as possible Copyright 2013 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol It is us
4. WING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of o
5. ed to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death A DANGER Indicates a hazardous situation which if not avoided will result in death or serious injury Indicates a hazardous situation which if not avoided AWARNING could result in death or serious injury Indicates a hazardous situation which if not avoided ACAUTION could result in minor or moderate injury NOTICE CAUTION Addresses practices not related to personal injury IMPORTANT SAFETY INFORMATION AWARNING Read all safety warnings and instructions Failure to follow the warnings and instructions may result in serious injury Work Area 1 Keep your work area clean and well lit 3 Keep bystanders children and visitors Cluttered dark areas invite accidents away while operating the Sprayer Distractions can cause you to lose control 2 The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces Personal Safety 1 Follow all guidelines regarding 3 Dress properly Do not wear loose clothing or chemicals sprayed including MSDS jewelry Contain long hair Keep your hair and instructions and EPA regulations clothing away from moving parts Loose clothes jewelry or long hair can be caught in moving parts 2 Stay alert Watch what you are doing and use common sense when operating the Sprayer 4 Do not overreach Keep proper
6. it operates properly and does not stick Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement The warnings and cautions discussed in this manual cannot cover all possible conditions and situations that may occur The operator must understand that common sense and caution are factors that cannot be built into this product but must be supplied by the operator Store idle tools and equipment out of reach of children and other untrained people Tools and equipment are dangerous in the hands of untrained users Maintain the Sprayer with care Keep this product clean A properly maintained Sprayer is easier to control A SAVE THESE INSTRUCTIONS Specifications Hose Length 2 gallons 1 25 gallons a Maximum Output 45 PSI 45 PSI Item 61280 61281 For technical questions please call 1 800 444 3353 Page 3 Components and Controls Handle Funnel Top A Pressure Release Valve not shown Trigger Hose Wand GREENWOOD Shoulder Tank Strap Nozzle Figure A Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product 1 Assemble Wand 2 Attach Shoulder Strap Attach Rings a Loosen Wand Nut then slide Wand to Shoulder Strap holes into Trigger Handle Assembly b
7. ng chemicals sprayed including MSDS instructions and EPA regulations Release pressure in Tank by pulling up on the Pressure Release Valve before loosening or removing parts Contents are under pressure and may spurt forcefully 1 BEFORE EACH USE inspect the general 2 AFTER EVERY USE Clean the Sprayer condition of the Sprayer Check for a Flush with water b Clean Nozzle and Filter 21 c Rinse with water and allow to air dry loose hardware e misalignment or binding of moving parts e cracked or broken parts and 3 PERIODICALLY lubricate all moving parts of any other condition that may the pump assembly with petroleum jelly affect its safe operation 4 Store the Sprayer in a safe dry clean location out of reach of children and out of sunlight Troubleshooting Possible Causes Likely Solutions Unit does not spray Spray pattern is undesirable Suction Tube 20 detached Not enough liquid in tank Handle Assembly loose Hose Nut 22 loose Safety Cap 24 loose Sprayer not pressurized Spray fluid contains particles or sand Nozzle and or Filter clogged with mineral buildup Nozzle needs adjustment Spray fluid contains particles or sand Nozzle and or Filter clogged with mineral buildup Reattach Suction Tube Add liquid to tank Tighten Handle Assembly Tighten Hose Nut Tighten Safety Cap Pump Handle to pressurize Sprayer Di
8. p sufficient pressure Once the Sprayer is pressurized as indicated by increased tension on the Handle discontinue pumping 6 Point the Nozzle toward the area to be sprayed then depress the Trigger to begin spraying Note Turn Nozzle to adjust spray pattern Item 61280 61281 For technical questions please call 1 800 444 3353 7 For continuous spray press the Trigger down and forward until it locks then release the Trigger To stop continuous spray press down and pull back on the Trigger Trigger Locked ee p a a teehee Trigger Unlocked Figure E 8 As you spray the Sprayer will depressurize When decreased pressure is affecting spray pattern pump the Handle until proper pressure is achieved then resume spraying 9 To refill the Tank pull up on the Pressure Release Valve and remove the Handle Assembly Then add liquid and replace the Handle Assembly Pump the Handle until proper pressure is achieved then resume spraying 10 When finished spraying e Depressurize the Tank Dispose of liquid e Clean the Sprayer according to Maintenance Instructions Page 5 Inspection Maintenance and Cleaning Procedures not specifically explained in this manual must be performed only by a qualified technician AWARNING Do not use damaged equipment If abnormal noise vibration or leaking air occurs have the problem corrected before further use Follow all guidelines regardi
9. sassemble clean then reassemble Nozzle and or Filter Empty clean then refill Tank with properly strained fluid Disassemble clean then reassemble Nozzle and or Filter Adjust Nozzle Disassemble clean then reassemble Nozzle and or Filter Empty clean then refill Tank with properly strained fluid Disassemble clean then reassemble Nozzle and or Filter Follow all safety precautions whenever diagnosing or servicing the Sprayer Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts Page 6 For technical questions please call 1 800 444 3353 Item 61280 61281 Parts List and Diagram Part Description Qty Part Description Qty i i 25 7 26 27 28 10 29 11 30 12 31 13 32 14 33 15 34 16 1 35 1 17 36 Shoulder Strap not shown i 23 30 gt 1 x oo i o _3 24 7 22 25 yo Y 26 18 ul z 2g 20 36 29 17 Item 61280 61281 For technical questions please call 1 800 444 3353 Page 7 PLEASE READ THE FOLLO
10. ur product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state GREENWOOD 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 800 444 3353
Download Pdf Manuals
Related Search