Hans Grohe AlFie Aquasaur User's Manual
Contents
1. The Fun Handshower Enclosed you will find complete instructions for installing Alfie the Aquasaur a brightly colored handshower that makes showering fun Designed for the young at heart Alfie features two spraymodes and unique self cleaning whiskers Alfie the Aquasaur is just one of a full range of Hansgrohe products for bath and kitchen Each product has been carefully designed to be safe reliable and easy to use If you would like to receive further information on Hansgrohe please call us at 800 334 0455 Shower Power e aixe co ALFIE AQUASAUR REPLACING EXISTING SHOWERHEAD WITH ALFIE Handshower support Unscrew existing showerhead from shower arm Clean threads on shower arm with steel wool and wrap the threads with Teflon tape Place a hose washer in the shorter of the two hose end connectors on the Techniflex hose Screw this end of the hose to the shower arm If wrench tightening is necessary use a cloth to protect the finish Place a second hose washer in the longer hose end connector Attach this end to Alfie and hand tighten Support Alfie with a stationary handshower support 28321000 or an angle adjustable Porter E handshower support 27504000 Note see instructions provided with individual products for additional installation guidelines Note Hansgrohe recommends the use of external vacuum breaker 06510000 between the shower2. The nipple should be long enough so that it extends 5 8 outside the surface of the finished wall Wrap both ends of the nipple with Teflon tape and install e Attach wall outlet 27458001 to the exposed nipple Wrap the exposed male end of the wall outlet with Teflon tape e Place a hose washer in the shorter hose end connector Attach the short hose end connector to the wall outlet If wrench tightening is necessary protect the finish with a cloth e Place a hose washer in the longer hose end connector Attach this end to Alfie and hand tighten e Support Alfie with a stationary handshower support 28321000 or an angle adjustable Porter E handshower support 27504000 NOTE THE ABOVE INSTALLATION OPTION SHOULD BE INSTALLED ONLY BY A PROFESSIONAL PLUMBER REPLACING EXISTING SHOWERHEAD AND ARM WITH ALFIE AND PORTER E HANDSHOWER SUPPORT AND HOSE Nipple Porter E PPS with outlet Alfie j Techniflex hose e Remove existing showerhead and shower arm e Obtain a 2 male threaded brass nipple The nipple should be long enough so that it extends 5 8 outside the surface of the finished wall Wrap both ends of the nipple with Teflon tape and install e Install the Porter E with outlet 27508001 mounting piece according to the installation instructions included with it Install the cover Wrap the outlet threads with Teflon tape e Place a hose w
3. arm and Techniflex hose ADDING ALFIE TO AN EXISTING SHOWERHEAD WITH INVERSA DIVERTER shower arm S X g showerhead handshower E support S Techniflex hose Remove existing showerhead from the shower arm If it is necessary to use a wrench protect the showerhead and shower arm connector with a cloth Clean the shower arm threads with steel wool and wrap with Teflon tape Attach Inversa Diverter 28719000 to shower arm Wrench tighten using a cloth to protect the finish Wrap both outlets of the Inversa with Teflon tape Reattach the showerhead to the front outlet of the Inversa diverter and wrench tighten Place a hose washer in the shorter hose end connector Screw the shorter hose end connection fo the side outlet port of the Inversa Place a hose washer in the longer hose end connector Attach this end to Alfie and hand tighten Use handshower support 28321000 to support Alfie THE FOLLOWING INSTALLATION OPTIONS RE QUIRE IN WALL PLUMBING INSTALLATION BY A PROFESSIONAL PLUMBER IS REQUIRED Please note in Massachusetts the maximum output water temperature can be no higher than 112 F 90743105 03 2008 REPLACING EXISTING SHOWERHEAD AND ARM WITH ALFIE AND WALL OUTLET lea Handshower Support oy Porter E J Techniflex hose e Remove existing showerhead and shower arm e Obtain a 12 male threaded brass nipple
4. asher to the shorter hose end connector Attach this end to the Porter E Wrench tighten if desired but use a cloth to protect the finish on the hose and on the Porter E e Place a hose washer to the longer hose end connector Attach this end to Alfie and hand tighten e Sit Alfie in the holder NOTE THE ABOVE INSTALLATION OPTION SHOULD BE INSTALLED ONLY BY A PROFESSIONAL PLUMBER MOUNTING ALFIE ON A WALLBAR WITH WALL OUTLET e Remove existing showerhead and shower arm e Obtain a male threaded brass nipple The nipple should be long enough so that it extends 5 8 outside the surface of the finished wall Wrap both ends of the nipple with Teflon tape and install e Install wall outlet 27458001 to the nipple e Install wallbar Unica B 27702000 or Unica S 27712000 at the desired height e Wrap the wall outlet nipple with Teflon tape Place a hose washer in the shorter hose end connector Screw this end to the wall outlet Place a hose washer in the longer hose end connector Attach this end to Alfie and hand tighten e Sit Alfie in the holder on the wallbar Note THE ABOVE INSTALLATION OPTION SHOULD BE INSTALLED ONLY BY A PROFESSIONAL PLUMBER SNAP ON CONNECTOR SET 28346000 If Alfie is to be used as an accessory to an a Connector set Techniflex hose existing handshower snap on connector 28346000 can be specified NOTE Disconnect the Alfie hand
5. shower from the hose by depressing the button Handshowers with the snap on connector are not recommended for use by children who may accidentally disconnect the handshower while in use
Download Pdf Manuals
Related Search