Hannspree T232 User's Manual
Contents
1. Function Control Panel Icon Function Remote Control Icon Menu M MENU Menu MENU Select Select OSD OSD item CH A V VA item AT Enter VOL A V Enter lt gt Adjust VOL A V Adjust lt gt The following sections explain how to adjust settings in the OSD menus using the remote control OSD Setting Menu MAIN MENU PICTURE Press menu to enter the OSD Main Menu screen The Main Menu appears SELECT 4 gt ENTER MENU CLOSE Notes e Press menu to open and close the OSD menu at any time e Alternatively select the EXIT option in the menu to return to the previous menu 46 HANNSpree Picture Setting MAIN MENU PICTURE Press menu to enter the OSD Main Menu screen 1 Press lt or P to enter the PICTURE Menu SELECT lt gt ENTER MENU CLOSE Notes e You can control the OSD with either the remote control or the control panel e PC picture mode and TV picture mode have different menu items PC picture mode includes a Backlight adjustment HANNSpree 47 Brightness Use this control to adjust the brightness of the screen image 1 The slider bar shows the current PICTURE g BRIGHTNESS _ IIIf 50 setting 2 Press gt to increase the brightness 3 Press lt q to decrease the brightness SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed immediately 48 HANNSpree Contrast Use this control to adjust the contrast of the screen image PICTURE CONT2. Make sure the MPX option is set to STEREO Il or MONO See MPX on page 67 Adjust the balance in the OSD menus See Balance on page 60 Make sure the audio cable is connected securely Try the Auto Program function in the OSD TV Setting menu See Auto Program on page 66 Use the Reset function in the OSD menu See Taking Care of Your TV amp Remote Control on page 79 Situation Cannot operate menus Solution The system is in a state such that those settings are not available Make sure the video signal cable is Screen image turns over connected properly Adjust the location of the antenna placing it Snow appears on the screen far from roads or sources of interference Check the antenna and the video signal line connections Readjust the sharpness setting Blurred or overlapped images Choose programs with high quality signals Adjust the direction of the antenna or change the video signal cable Make sure the battery is inserted correctly Remote control doesn t work Replace the battery with a new one Make sure the TV power cord is plugged in Make sure the path between the remote control and the sensor is clear Try operating the remote control at a closer distance to the TV Refer to Using the Remote Control on page 35 Hannspree 8 1 mm Warranty and Service For complete warranty service information please refer to the Warra
3. Note The new setting is confirmed immediately 52 HANNSpree Backlight PC mode Use this control to adjust the intensity of the screen backlight This control is only for use in PC mode 1 Press W to select BACKLIGHT The slider bar shows the current setting BACKLIGHT mm 100 2 Press to increase the backlight intensity 3 Press lt to decrease the backlight intensity PICTURE 7 SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed immediately BACKLIGHT Default 100 HANNSpree 53 Black Level Use this control to adjust the intensity of the black elements of the screen image 1 Press VW to select BLACK LEVEL The slider bar shows the current setting 2 Press gt to increase the black BLACK LEVEL PIIIIHMI I 50 level PICTURE 3 Press lt to decrease the black SELECT lt gt ADJUST MENU CLOSE level S Note The new setting is confirmed immediately 54 HANNSpree Color Temperature Use this control to adjust the color temperature of the screen image A warm setting will result in an image with a predominantly red hue A cold setting will result in a bluer image 1 Press W to select COLOR TEMP PICTURE 2 Press lt or to change the color temperature The current setting is shown in brackets The following options are available e STD for standard color settings SELECT lt gt ADJUST MENU CLOSE e WARM for color settings with
4. 70 HANNSpree Glock Use this control to adjust the computer image on your TV screen PC CLOCK T e 50 SELECT ap ADUST MENU CLOSE 1 Press W to select CLOCK The slider bar shows the current setting 2 Press d or P to adjust the clock setting Note The new setting is confirmed immediately Hannspree f 1 Auto Adjustment Use this control to adjust the computer image on your TV screen automatically PC 1 Press W to select AUTO ADJ The current setting is shown in AUTO ADJ OFF brackets 2 Press d or P to enable the Auto Adjustment function The display is automatically configured to SELECT lt 4 ADJUST MENU CLOSE match the computer display properties Horizontal Position Use this control to adjust the horizontal position of the computer image on your TV screen PC 1 Press VW to select H POSITION The slider bar shows the current H POSITION A E 50 setti ng 2 Press lt or P to adjust the horizontal position SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed immediately 12 HANNSpree Vertical Position Use this control to adjust the vertical position of the computer image on your TV screen PC V POSITION UT 50 SELECT lt gt ADJUST MENU CLOSE 1 Press W to select V POSITION The slider bar shows the current setting 2 Press lt or P to adjust the vertical position Note The new setting is confirmed immediately
5. HANNSpree 73 DOS Mode Use this control to display computer text but not graphics on your TV screen PC 1 Press W to select DOS MODE The current setting is shown in brackets 2 Press lt or P to toggle the setting between TEXT and GRAPHIC e TEXT Select this option when EE using DOS at the command line e GRAPHIC Select this option when using DOS based graphical programs DOS MODE GRAPHIC 74 HANNSpree Miscellaneous Setting MAIN MENU Press menu to enter the OSD Main Menu screen MISCELLANEOUS 1 Press YW to select MISCELLANEOUS 2 Press lt or P to enter the MISCELLANEOUS Menu SELECT lt gt ENTER MENU CLOSE Note Operate the OSD with either the remote control or the control panel HANNSpree LE Wide Use this control to set the aspect ratio of the screen MISCELLANEOUS 1 WIDE 16 9 J SELECT ap ADJUST MENU CLOSE S Language The current setting is shown in brackets Press lt or P to select the screen format from the following 16 9 ANAMORPHIC 4 3 Use this control to set the OSD display language MISCELLANEOUS 1 LANGUAGE ENGLISH J SELECT lt gt ADJUST MENU CLOSE e Press V to select LANGUAGE The current setting is shown in brackets Press lt or P to select the language from the following ENGLISH aad Note The default language setting is HX 76 HANNSpree Sleeper Use this control to turn the TV off automatically after a set tim
6. Selecting Channels 1 Press channel up to increase the channel number by one 2 Press channel down to decrease the channel number by one 3 Enter the specific channel number by pressing the number buttons on the remote control The channel number is displayed on the screen Switching Source Signals Press source on the control panel repeatedly to select different sources Alternatively press TV on the remote control to select the TV source press RGB to select the PC source and press AV repeatedly to cycle through AV1 AV5 sources The selected source TV PC AV1 AV2 AV3 ANA and AV5 appear on the top left corner of the screen in that order HANNSpreeoO Notes e The TV supports S Video input in addition to normal video and audio signals The TV detects the signal type automatically and gives priority to S Video when two signals are detected at the same time e AV5 appears on selected models only Adjusting the Volume 1 2 3 4 Press volume up to increase the volume Press volume down to decrease the volume Press mute to eliminate sound The word MUTE appears on the bottom right corner of the screen and sound is turned off Press mute again to restore the original volume Using PIP and POP The TV features Picture in Picture PIP and Picture outside Picture POP enabling you to view two sources at the same time Follow these instructions 1 Note Turn on the TV and select a source signa
7. red as the dominant color e COLD for color settings with blue as the dominant color COLOR TEMP STD Notes e The new setting is confirmed immediately e The default color temperature is STD HANNSpree 59 Preset Use this function to reset all settings to factory defaults 1 Press W to select PRESET The current setting is shown in brackets 2 Press lt or ON appears in the brackets All picture settings PRESET OFF are returned to the factory set 4 SELECT gt ADJUST MENU CLOSE default values PICTURE Note The preset function erases all of your custom picture settings 56 HANNSpree Audio Setting MAIN MENU Press menu to enter the OSD SE Main Menu screen 1 Press to select AUDIO 2 Press lt or P to enter the AUDIO Menu 7 SELECT lt gt ENTER MENU CLOSE Note You can control the OSD with either the remote control or the control panel HANNSpree of Treble Use this control to adjust the level of audio treble produced by the TV aie 1 The slider bar shows the current TREBLE ITT 108 setting 2 Press to increase the treble A Press lt to decrease the treble SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed immediately 58 HANNSpree Dass Use this control to adjust the level of audio bass produced by the TV 1 Press W to select BASS The slider bar shows the current setting Press to increase the b
8. such as vases shall be placed on the apparatus AN Power To avoid danger of fires or electric shock only use the adapter listed below which is compatible with this TV e LI SHIN INTERNATIONAL ENTERPRISE CORP LSE0226B20150 HANNSpree f IMPORTANT SAFETY INSTRUCTIONS 8 Hannspree AUN LD 10 Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus CAUTION AN 11 12 13 14 Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified
9. card feature enables you to Use the remote control arrow buttons to select PHOTO Press enter A screen appears displaying thumbnails of images on the CF card Use the arrow buttons to select a thumbnail image Press enter The selected thumbnail expands to full screen mode Press kor V to go to the next picture Press lt or A to go to the previous picture Zoom in on images and pan the view Follow these instructions 1 2 Put an image in full screen mode as described in the previous section Press sleep on the remote control to zoom in on the image Zoom ratios are available 1X 2X 3X 4X Magnification will vary by input format When zooming in on an image press gt 4 V A on the remote control to pan the image 40 HANNSpree Rotating Images Follow these instructions to rotate images when in Photo mode 1 Put an image in full screen mode as described in the previous section 2 Press CC TTX on the remote control 3 The image is rotated 90 degrees 90 in a clockwise direction Note You cannot rotate an image when the image is being zoomed Viewing a Slide Show Flash card has a slide show feature that enables you to view your images 1 Press PIP POP to start the slide show The files are viewed sequentially and files in your music library are also played in sequence 2 Press PIP POP again to stop pause the slide show Note Refer to Slide Show Setup on page 44 to configure slide show set
10. is denoted by the icons and the file size creation date and thumbnail view of the file provides additional information Use the arrow buttons to select a file and press Enter The selected file is displayed or played HANNSpree 43 Using the Setup Menus From the Flash card main screen press menu to enter the SETUP MENU MAIN PAGE MUSIC SETUP E SHOW SETUET 3 Use the arrow buttons to select a MOVIESETUP menu item and press enter to open SREFERENGES the selected item Select EXIT SETUP and press enter to leave the PS setup menu GENERAL SETUP After making your selections in the submenus use the arrow buttons to select MAIN PAGE and press enter to return to the SETUP MENU MAIN PAGE Music Setup e Repeat Mode Use the arrow buttons to select REPEAT MODE Repeat mode has the following options ONE repeats one MP3 file ALL repeats all files in sequence OFF turns repeat mode off Slide Show Setup e Folder Repeat Use the arrow buttons to select FOLDER REPEAT Folder Repeat mode has the following options ON runs the slide show again in the selected folder OFF turns the folder repeat mode off e Interval Time Use the arrow buttons to select INTERVAL TIME Set the interval time to 1 3 5 or 10 seconds e Transition Use the arrow buttons to select TRANSITION and select a transition from the list 44 wannspree Movie Setup Select MOVIE SETUP and press e
11. settings to factory defaults AUDIO PRESET OFF J 7 SELECT lt gt ADJUST MENU CLOSE 1 Press W to select PRESET The current setting is shown in brackets 2 Press lt or gt ON appears in the brackets All audio settings are returned to the factory set default values Note The preset function erases all of your custom audio settings HANNSpree 63 TV Setting MAIN MENU Press menu to enter the OSD TV Main Menu screen 1 Press to select TV 2 Press lt or P to enter the TV Menu SELECT lt ENTER MENU CLOSE Notes e Operate the OSD with either the remote control or the control panel e The TV OSD menu is not available if the input source is not TV 64 HANNSpree System Use this control to determine the PAL signal type TV 1 The current setting is shown in aban Lee J brackets 2 Press lt or P to select from AUTO B G D K or l SELECT ar ADUST MENU CLOSE Ch Skip Use this control to define which channels should be skipped when scrolling through the channels with the channel up and channel down buttons 1 Press VW to select CH SKIP 2 Press d or P to display the CH SKIP submenu 3 Press lt or P to select a 4 TV CH SKIP channel Press V to select CH SKIP The current setting is shown in brackets 5 Press lt or P to select OFF or CH SKIP ON SELECT lt gt ADJUST MENU CLOSE SELECT ap ADUST MENU CLOSE HANNSpree 65 Auto
12. E ET A NET 62 PIO OD ee 63 TY O e WEE 64 O e E ones esse coc ea eee eee 65 CI ID EE 65 AWO LOGE AM cam stinnsinancacancceacsaewneian E E E ETER AE 66 FRO FOUNO oera a coeenieen beens sence Sena gakeecaaeceseucenecceuces 66 IP Kereta nse OI E EEEE E E A AE TE 67 Favorite ln 68 PO ORUG EE 69 P ege 70 ee 71 AUTO AdJUS MENM EE 72 MHOrZontal POSSIO NEEN 72 Verucal POSION EE 73 DOS MOUE E 74 Miscellaneous Gettmg cece ccce cece ee sceeeeeeeesaseeeeeeesgaees 15 EE dg tee Sege Ne en eg 76 Rive Le E 76 SIO ODOT E 77 LN un 78 11 Taking Care of Your TV amp Remote Control 79 125 TROUDICSNOOUING EE 80 13 Warranty And Gervice cece ccc cece eee eeeeeeeeeeseeesseeensanensaeees 82 14 e ee ge ru CEET 83 PIP Operation lee TC 84 TBI SS UC eet 85 2 Hannspree Regulatory Information FCC Compliance Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Additional Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency ene
13. HANNSpree HANNSpree HANNSPREE HONG KONG LIMITED 23 Liquid Crystal Display Unit6 2 F No 1 Hung To Road Kwun Tong Kowloon Hong Kong Televis i on TEL 2345 3822 FAX 2345 3790 www hannspree com T232 User s Manual BBE SRS CO TruSurround eala MAK 000025 Table of Contents 1 Regulatory Information cece cece cece cence tenets cease eeaeeeneaeeeas 3 2 Description of Warning Symbols ccc cece cece e eee e eee e ee eeeeees 5 Bi Safety NOCES EE 6 Aa GE 13 J Tute siele te bo Ce EE 15 POATE EE 15 D Checking Package CGontents ccc ccc cece eee e eens eeeeaeeneaees 16 LEE Getting Started WEE 17 CONTO GING sutase soca er EE A tates annonce evewene eoaee he 17 input and Output JACKS EE 18 Remote CON A e EE 20 Inserting the Remote Control Batteries es 23 8 Making Connections ccc cece ee ecceeseeeeeeseeeaaeensaeensaaees 25 Connecting to an Antenna or Cable fN 25 Connecting to AV Devices cece cece eeneeeesaeeeeanenaes 26 Connecting to a VCR VCD DVD Player Using Component Video 26 Connecting to a VCR VCD DVD Player Using S Video 27 Connecting to a VCR VCD DVD Player Using Composite video 28 Connecting to a Video Camera Using S Video saasnnnnnnea 29 Connecting External Earphones cece ccc cece e cence eeaes 30 Connecting an Amplifier of Speaker 31 E eine eg late toa ag eens ene neice ee arene enn ne eyes nese nen etn oe re 32 Connecting
14. Member States relating to Electromagnetic Compatibility 89 336 EEC and the Amendment Directive 92 31 EEC Low Voltage Directive 73 23 EEC and the Amendment Directive 93 68 EEC 1 applies only to products purchased in Canada 2 applies only to products purchased in the European Union 4 wannspree Description of Warning Symbols AN Before You Proceed 1 Read all Safety Notices in Section 3 of this manual and instructions in the User s Manual carefully before either plugging in or turning the TV on Keep this User s Manual in a safe place for future reference Keep the box and packaging in case the TV needs to be shipped in the future Follow the TV and warning label instructions Any uses operations changes alterations or modifications of the TV that do not follow the instructions in this manual will void this TV s warranty CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is used to alert This symbol is used to alert users to pay attention to users to the risk of electric important descriptions shocks due to dangerous and regarding usage maintenance uninsulated components repair and additional important information related to this TV HANNspree 9 Safety Notices Electric Power Notice Electric power may cause personal injury and mechanical damage if misused Although safety has been taken into consideration during the design and production of this TV electric shock or fi
15. Program Use this control to scan all the available channels and assign a channel number to each w 1 Press W to select AUTO PROGRAM The current setting is AUTO PROGRAMLOFF shown in brackets 2 Press lt or P to initiate a channel scan A progress bar SELECT lt gt ADJUST MENU CLOSE and a percentage figure show the progress of the operation Fine Tune Use this control to fine tune individual channels for the best possible reception Press V to select FINE TUNE Press d or P to display the FINE TUNE submenu Press lt or P to select a channel to tune Press V to select FREQUENCY Press d or P to adjust the frequency of the channel TV FINE TUNE 7 SELECT lt gt ENTER MENU CLOSE ak O Mech FINE TUNE CHANNEL 10 7 SELECT lt gt ADJUST MENU CLOSE 66 HANNSpree MPX Use this control to determine the audio output TV MPX STEREO 7 SELECT lt lt gt ADJUST MENU CLOSE 1 Press W to select MPX The current setting is shown in brackets 2 Press lt or P to select from the various MPX options e STEREO enables stereo output when viewing programs broadcast in stereo e 1l enables you to select language output options You can select one of two languages to be output e MONO selects a monophonic audio signal Select this to reduce noise that is present in weak stereo broadcasts The following options are allowed according to the broadcast signal e S
16. RAST TT prere 50 SELECT lt gt ADJUST MENU CLOSE 1 Press W to select CONTRAST The slider bar shows the current setting 2 Press gt to increase the contrast A Press lt to decrease the contrast Note The new setting is confirmed immediately HANNSpree 49 Hue Use this control to adjust the ratio of colors in the screen image 1 Press W to select HUE The slider bar shows the current setting HUE L 50 2 Press gt to increase the hue 3 Press lt to decrease the hue PICTURE SELECT lt gt ADJUST MENU CLOSE Notes e The new setting is confirmed immediately e Hue cannot be adjusted when viewing a PAL signal in TV mode or AV mode Hue can be adjusted when viewing an NTSC signal in AV mode 50 HANNSpree Saturation Use this control to adjust the density of the colors in the screen image 1 Press VW to select SATURATION The slider bar shows the current setting Press gt to increase the saturation A Press lt to decrease the saturation PICTURE SATURATION UT 50 2 7 SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed immediately Hannspree 9 1 Sharpness Use this control to adjust the sharpness of the screen image 1 Press VW to select SHARPNESS The slider bar shows the current PICTURE setting AREE ae 2 Press to increase the sharpness A Press lt to decrease the SELECT lt gt ADJUST MENU CLOSE sharpness
17. TEREO MONO e Il MONO e MONO MONO Notes e Select mono sound mode if the signal is not clear or if you are in areas with poor signal reception Stereo and I Il modes are available only if included with the broadcast signal HANNSpree 67 Favorite Channel Use this control to set favorite channels Press V to select FAV CHANNEL Press lt or P to display the FAV CHANNEL submenu Press A or to set 4 favorite channels Press lt or P to choose a channel to assign to the favorite channel number you selected in step 3 TV FAV CHANNEL SELECT lt gt ENTER MENU CLOSE A O N FAV CHANNEL SETTING CHANNEL 1 1 SELECT ap ADUST MENU CLOSE Note Assigning a channel to one of the four favorite channel numbers replaces a previously stored channel assignment 68 HANNSpree PC Setting MAIN MENU Press menu to enter the OSD PC Main Menu screen 1 Press to select PC 2 Press lt or P to enter the PC Menu SELECT lt ENTER MENU CLOSE Notes e Operate the OSD with either the remote control or the control panel e The PC OSD menu is not available if the input source is not PC HANNSpree 69 Phase Use this control to adjust the computer image on your TV screen PC 1 The slider bar shows the current PHASE U e 50 setti ng 2 Press d or P to adjust the phase setting SELECT ap ADUST MENU CLOSE Note The new setting is confirmed immediately
18. Use the remote control arrow l buttons to select a file format OPT and press enter to open the file format page view Notes e Selected models only e Flash card reader Does not support Fast CF card Currently the TV s Flash card reader only supports flash cards from PQI HAGIWARA Photo format page view ScanDisk TRANSCEND and KINGSTON 38 HANNSpree Remote Control Keys The following table lists the remote control buttons used to operate the Flash card feature Button Arrow Al V1 d P Return Menu Hold PIP POP Sleep CC TTX Swap Position Flash card Name Enter Menu Root Slide Show Zoom Rotate Page Up Page Down Function Press these buttons to navigate the Flash card menus In Photo mode use these buttons to pan a picture when zooming in Press this button to confirm a selection or to activate a function Press this button to open the setup menu Press this button to return to the Flash card main screen Press this button to start and stop the slide show Press this button to zoom in on a picture Zoom ratios are available 1X 2X 3X 4X Magnification will vary by input format Press this button to rotate a picture when in Photo mode Press this button to go to the previous page in the menus Press this button to go to the next page in the menus HANNSpree 39 Viewing Photos 1 2 3 Zooming and Panning The Flash
19. ap the PIP or POP pictures In flash card mode use this button to go to the previous page in the menus Press this button to select your favorite channels Press this button repeatedly to cycle through the TV reception options for the TV Press this button repeatedly to cycle through the AV in options for the TV Press this button to return to the last menu when using on screen display menus In flash card mode use this button to confirm a selection or activate a function Press this button repeatedly to set the length of time until the TV turns off Cancel the timer by pressing until the displayed time disappears In flash card mode use this button to zoom in on a picture when in Photo mode Press this button to show messages on the screen such as the channel number mode and others Press this button again to close the displayed message Inserting the Remote Control Batteries 1 Open the battery compartment cover at the A back of the remote control A ji 2 Insert the batteries paying attention to the polarity markings inside the battery compartment B 3 Replace the battery compartment cover C HANNSpree 23 CAUTION A e Ifthe remote control is not used for a long period remove the batteries and store them separately e Handle damaged or leaking batteries carefully and wash hands after such handling e If your remote control has two batteries do not mix new and old batteries because the
20. ass A Press lt q to decrease the bass AUDIO BASS US 108 2 SELECT lt gt ADJUST MENU CLOSE Note The new setting is confirmed immediately HANNSpree 59 Balance Use this control to alter the audio balance between left and right speakers 1 Press to select BALANCE The slider bar shows the current BALANCE dunn June gt setting 2 Press to shift the balance to the right speaker A Press lt to shift the balance to SELECT at ADJUST MENU CLOSE the left speaker AUDIO Note The new setting is confirmed immediately 60 HANNSpree BBE TruSurround and EALA Use these controls to set the audio output characteristics for the TV 1 Press Aor to select BBE TruSurround or EALA The current setting is shown in ge corr J brackets 2 Press lt or P to select a setting for each effect AUDIO SELECT 4 gt ADJUST MENU CLOSE BBE OFF HIGH LOW TruSurround OFF ON EALA OFF ON Note Only one sound effect can be selected at a time Hannspree 61 Earphone Use this control to set the earphone output volume AUDIO 1 Press W to select EARPHONE The slider bar shows the current setting 2 Press to increase the earphone EARPHONE Willen 20 volume 3 Press lt to decrease the 7 SELECT lt gt ADJUST MENU CLOSE earphone volume Note The new setting is confirmed immediately 62 HANNSpree Preset Use this control to reset all
21. dust Avoid blocking the TV s vents do not place the TV on a bed sofa carpet or in a sealed cabinet Install the outdoor antenna not included away from power transmission lines to avoid possible danger Unplug the power cord and antenna connector when there is a storm or when the TV is not in use for long periods to avoid electric shock from lightning Hannspree 11 Operation This TV is designed for home power sources as labeled on the casing Avoid using any other power accessories to avoid electric shock or other damage The plug can be inserted into an outlet in only one direction Do not alter the plug Contact an authorized service technician if you cannot plug it in correctly If there is any problem that cannot be resolved Ck according to the instructions given in this manual contact an authorized service technician immediately Do not attempt any methods not covered in this manual Maintenance Do not attempt to repair the TV by yourself w Se Contact an authorized service technician Ask the service technician to complete a safety inspection before switching the power on after completing any maintenance 1 2 Hannspree Preface Thank you for purchasing a Hannspree Liquid Crystal Display Television LCD TV Your new TV will allow you to enjoy superior audio and video while enriching your lifestyle with advanced technology Please carefully read this manual in its entirety before s
22. e MISCELLANEOUS SLEEPER C OFF d 7 SELECT ap ADUST MENU CLOSE 1 Press W to select SLEEPER The current setting is shown in brackets 2 Press lt or P to select a sleep timer value from the following OFF 30 60 90 120 You can also press SLEEP on the remote control to select OFF 30 60 90 or 120 minutes Press Display the setting appears on the TV screen The remaining time is updated every 1 minute on the display HANNSpree L I Time This control enables you to set the system time MISCELLANEOUS 1 2 TIME 3 4 7 SELECT ap ENTER MENU CLOSE TIME SETTING HOUR 2 PM SELECT lt gt ADJUST MENU CLOSE 78 HANNSpree Press V to select TIME Press lt or P to display the TIME submenu Press lt or P to increase or decrease the hour setting Press V to select MINUTE Press lt or P to increase or decrease the minute setting Taking Care of Your TV amp Remote Control Note Turn the power off before you begin cleaning the TV For best results use a clean lens cloth to remove dust and fingerprints from the screen Do not wipe the shell of the TV with alcohol methanol gasoline or oil products to avoid damaging the finish Wipe the shell with a dry soft cloth and use neutral cleaning fluids If your model has leather components wipe the leather parts with a dry cloth and keep the area dry Place the TV far from sources of steam to avoid making the
23. e illustration presented here shows how to connect your TV to a VCR VCD DVD player using the AV1 component video port Actual connections may vary according to the make and model of your device Refer to the user s manual included with the AV device for more detailed instructions Note Location of the connectors depends on the TV model AV 1 R L PR Pa Y OEOO O LL Video cable Audio cable Cables and connectors are color coded red white red blue green 26 HANNSpree Connecting to a VCR VCD DVD Player Using S Video The following illustration shows how to connect the TV toa VCR VCD DVD player using the AV2 S Video port Actual connections may vary according to the make and model of the device Refer to the user s manual included with the camcorder for more detailed instructions am ES CS 00000 Dp 5 UC wt Zu S Video connector Audio connectors Video cable Audio cable Notes Cables and connectors are color coded e When connecting the S Video red white black connector and AV connectors at the same time the priority is given to the S Video connector e Location of the connectors depends on the TV model HANNSpree 27 Connecting to a VCR VCD DVD Player Using Composite Video The illustration presented here shows how to connect your TV to a VCR VCD DVD player using the AV3 comp
24. etting up using or Operating your TV To ensure the safe and correct installation and operations of the TV it is important that the safety and operation instructions in this manual are followed This instruction manual is designed to assist you in setting up and using the TV The information in this manual has been carefully checked for accuracy however no guarantee is given to the correctness of the contents The information in this manual is subject to change without notice To the extent allowed by applicable law Hannspree Inc Hannspree shall not be liable for direct indirect special exemplary incidental or consequential damages arising from any defect or omission in this manual even if advised of the possibility of such damages in advance Hannspree 13 Copyright Copyright 2005 Hannspree Inc All rights reserved This manual is protected by copyright and distributed under licenses restricting its use copying and distribution No part of this manual may be reproduced in any form by any means without the prior written authorization of Hannspree The TV described in this manual may include copyrighted software of Hannspree or other third parties Hannspree or other third parties preserves the exclusive rights for copyrighted software such as the right to distribute or reproduce the copyrighted software Accordingly and to the extent allowed by applicable law any copyrighted software contained in the product de
25. l Press PIP POP from the remote control A picture in picture window appears on the display using the last selected source signal for the PIP Refer to PIP Operation Mode on page 84 for information on which sources are compatible with each other in PIP and POP mode 36 HANNSpree Press SWAP from the remote control to switch the focus from the PIP to the main source The PIP identification line disappears and the PIP window border disappears Press POSITION from the remote control to move the PIP window to one of the four corners of the screen as shown Press PIP POP to switch to picture outside picture POP mode The two signals are displayed side by side MAIN 07 POP 56 Press PIP POP again The screen displays the main source signal again HANNSpree 37 Using the Flash card Feature The Flash card feature enables you to view photos watch movies and listen to MP3 files on CF cards inserted in the Flash card slot AV 5 The following describes the Flash card feature Starting Flash card 1 Insert a CF card into the CF card slot AV 5 Refer to Inserting a Compact Flash Card CF card on page 34 2 Use the remote control arrow buttons to switch to AV5 The Flash card main screen MAIN AV5 FLASHCARD appears From this screen you can choose to view photos listen to music watch videos or look at the MUSIC VIDEO FILE contents of the CF card Flash card main screen 3
26. leather wet Be careful to disconnect the power plug correctly Hold the plug Do not attempt to disconnect the plug by pulling on the power cord Arrange and store the power cord neatly as shown to the left to avoid knotting or bending which may cause fire due to damage or electric leakage Protect the remote control from shock or vibration to avoid damage Do not place the remote control in hot or humid locations HANNSpree 79 Troubleshooting Situation Solution No picture and sound No picture or poor picture sound is OK Picture is not in color Picture is OK no sound One of the speakers has no sound Cannot receive some TV channels using cable TV Want to reset TV settings 80 HANNSpree Connect the power cord properly Check if the power LED is on or not Press power on the control panel or remote control Press source to cycle through connected video sources Press channel up or channel down to switch to other TV stations Make sure all cables are connected properly Check the antenna and cable connections Adjust the brightness in the OSD menus See Brightness on page 48 Adjust the saturation in the OSD menus See Saturation on page 51 Make sure all cables are connected properly Make sure the source device is functioning properly Make sure the audio cable is connected securely Turn the mute off Press volume up on the control panel or remote control
27. life of the new batteries will be shortened Chemical fluids may leak from the old batteries e Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the equipment manufacturer Discard used batteries according to manufacturer s instructions e Refer to your local recycling or waste disposal rules and contact a local waste disposal vendor to dispose of used batteries e The remote control may have a magnet in it so do not place magnetic sensitive items such as watches credit cards or flash media close to the cover e Do not use force when pulling the remote control cover open you may damage the hinge 24 HANNSpree Making Connections Connecting to an Antenna or Cable TV 1 Connect one end of the VHF UHF Antenna or cable to ANT Jack VHF UHF IN Jack on the back of the TV 2 Connect the other end of the VHF UHF Antenna or cable to the antenna socket or cable Antenna ANT jack VHF UHF IN jack Antenna cable socket Antenna cable coaxial cable Note If you cannot receive channels after connecting to an antenna or cable TV line try scanning for channels See Favorite Channel on page 68 HANNSpree 25 Connecting to AV Devices Connect external devices such as VCD DVD players or VCRs to the TV using the AV1 AV2 AV3 and AV4 ports on the back or side of the TV Connecting to a VCR VCD DVD Player Using Component Video Th
28. n to mute the audio Press this button again to restore sound Selects the input source to be displayed TV PC AV1 AV2 AV3 AV4 or AV5 Turns the On Screen Display OSD menu on and off Changes channels Press channel up to increase the channel number Press channel down to decrease the channel number In PC or AV mode press either button to return to TV mode Press volume up to increase the audio volume Press volume down to decrease the audio volume Insert a CF card into this slot to view the contents of the CF card Use the Flash card feature to view the contents See Using the Flash card Feature on page 38 HANNSpree 17 Input and Output Jacks Description AV 1 R L PR PB Y AV2 R L V S AV3 R L V AV4 S VILIR ANT Antenna Cable TV line in 1 8 Hannspree Connector 00000 0000 000 O00 Function Use the AV1 input to connect an external device such as a VCR or a VCD DVD player with a component output Audio Input R L red and white audio cables Video Input PR PB Y video cables Use the AV2 input to connect an external device such as a VCR or a VCD DVD player Audio Input R L red and white audio cables Video Input V or S yellow video or S Video cable Use the AV3 input to connect an external device such as a VCR or a VCD DVD player with a composite output Audio Input R L red and white audio cables Video Input V yellow
29. nter to display the movie setup menu Interval Time Use the arrow buttons to select INTERVAL TIME Interval time mode has the following options FAST sets an increased interval speed between playback NORMAL sets the interval time to normal Repeat Mode Use the arrow buttons to select REPEAT MODE Repeat mode has the following options OFF turns the repeat mode off ONE repeats playback of selected movie ALL repeats playback of all movies in the folder Preferences select PREFERENCES and press Enter to display the preferences menu TV Type Use the arrow buttons to select TV TYPE TV type mode has the following options MULTI SYSTEM enables the system to automatically select the standard either NTSC or PAL NTSC sets the television standard to NTSC PAL sets the television standard to PAL Video Output Use the arrow buttons to select VIDEO OUTPUT Video output mode has the following option S VIDEO sets the video output to S VIDEO Defaults Use the arrow buttons to select DEFAULTS Select RESET and press enter to reset the Flash card settings to default values HANNSpree 45 Adjusting On Screen Display OSD Settings The On Screen Display OSD menu system provides a quick and simple method to adjust your TV s setting This chapter describes how to change each of the available settings The OSD menu can be accessed through either the control panel or the remote control
30. nty and Service Manual enclosed with your TV 82 HANNSpree Specifications LCD Panel Size Aspect Ratio Best Resolution TV System Video System Audio System Built in Stereo Speakers Amplifier Power Supply Power Consumption Component Format 23 inch LCD TV 23 inch TFT 15 9 1280 horizontal x 768 vertical PAL AV1 Component Video Audio in R L YPBPR AV2 Composite Video RCA jack S Video AV3 Composite Video RCA jack AV4 Composite Video RCA jack S Video AV5 Flash card reader selected models only AV1 AV2 AV3 AV4 L R RCA jacks audio input 8 mm line in jack audio input 3 5 mm earphone and L R line out RCA jacks audio output 7 5W 7 5W 220V 50 Hz 20V DC lt 150 W Maximum 480i 480p 576i 576p 720p 1080i HANNSpree 83 PIP Operation Mode The following table shows which main sources are compatible with PIP and POP sources Main Source PIP Source POP Source AV2 AV1 AV3 YPBPR or YCBCR AVA a TV2 AV2 AV2 AV2 S or CVBS as ae AV4 AV4 TV2 TV2 AV2 AV2 AV3 CVBS A ae AV4 AV4 TV2 TV2 AV2 AV2 AV4 S or CVBS Front AE E AV4 AV4 TV2 TV2 AV2 AV2 TV AV3 AV3 AV4 AV4 TV2 TV2 AV2 AV2 PC AV3 AV3 AV4 AV4 TV2 TV2 84 HANNSpree Glossary Aspect Ratio The ratio of width to height of a film image or display screen BBE A proprietary audio enhancement technology BBE compensates for distortion common t
31. o loudspeakers Color Temperature Adjusting the color temperature enables you to set the intensity of white light Color temperature is measured in Kelvin K Higher color temperatures result in a blue tint Lower temperatures result in a red tint EALA 3D surround sound enhancement technology that provides a more immersive and realistic soundscape Hue Colors in a color system are measured by hue saturation and luminance Hue indicates the predominant color LCD Liquid Crystal Display A display technology that uses rod shaped molecules liquid crystals that flow like liquid and bend light OSD On Screen Display A control panel on the television screen that allows you to select viewing options Saturation Chromatic purity indicating the amount of white contained in a color Fully saturated colors are pure colors less saturated colors appear as pastel shades Stereo is the default audio signal belonging to a particular channel S Video Separate video a video cabling standard used to transmit video by keeping brightness Y and color information C on separate channels Most often used with camcorders TruSurround 3D audio surround technology that delivers virtual Surround sound experience through any two speaker system including internal television speakers and headphones VCD A compact disk format developed in 1993 by Sony and Philips to capture full motion video A standard Video CD can hold 74 minutes of near VHS q
32. ors Three pronged depends on the TV model plug Images are for illustration only and may vary by model or region DC IN Power cord Power adaptor HANNSpree 33 Inserting a Compact Flash Card CF card 1 Remove the card reader slot cover from the side of the TV Note Step 1 depends on which TV model you purchase If the TV s card reader slot does not have a cover you can ignore step 1 and go straight to step 2 2 Insert the CF card in the direction of the arrow 3 To remove the CF card press the button The CF card pops out Gently slide out the CF card Note Selected models only 34 HANNSpree Using the TV Using the Remote Control For best results use the remote control within a distance of 20 feet 6 meters from the front of the TV Do not exceed an angle of 30 degrees when pointing at the TV Notes e The operational distance may be shortened when the signal sensor is directly exposed to strong light e Aim the transmitter on the remote control at the signal sensor and ensure that there are no obstacles between them Turning the TV On and Off 1 Press power on the remote control or on the control panel The power LED indicator on the front of the TV changes from red to green indicating that the power is on 2 Press power again The power LED changes from green to red indicating that the TV is off
33. osite video port Actual connections may vary according to the make and model of your device Refer to the user s manual included with the AV device for more detailed instructions AN cable Note Location of the connectors Cables and connectors are color coded depends on the TV model red white yellow 28 HANNSpree Connecting to a Video Camera Using S Video The following illustration shows how to connect the TV to a camcorder using the AV4 S Video port Actual connections may vary according to the make and model of the device Refer to the user s manual included with the camcorder for more detailed instructions HT ANA S Video A Audio connector 0 connectors nc D gt a wt wt Video cable Audio cable Cables and connectors are color coded Notes white red black e When connecting the S Video connector and AV connectors at the same time the priority is given to the S Video connector e Location of the connectors depends on the TV model HANNSpree 29 Connecting External Earphones External earphones may be used to listen to the TV rather than using the built in soeakers Connect headphones to the earphone line out as illustrated Earphone jack e External earphones are not included with the TV e The internal TV speakers still output sound when earphones are plugged in e The TV speakers function is to output the primary audio program The ear
34. phones function is to output the secondary audio program e Location of the connectors depends on the TV model 30 HANNSpree Connecting an Amplifier of Speakers Connect an external amplifier of speakers to the line out port to provide better sound quality Refer to the following illustration Lf LINE OUT Hie ET STANS KE mn i NI N Y IN KN 8 6 Jess Audio cable Note Cables and connectors are color coded Location of the connectors red white depends on the TV model Hannspree d Connecting to a PC Connect the TV to your PC to use it as the monitor using the DVI port as shown Connect the DVI port of the TV to the DVI output of the PC Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC Notes e You can connect the line out port of a CD ROM player stereo or other device to the TV s line in port to listen to the devices audio output e When changing from TV mode to PC mode the Power LED changes to amber indicating that the PC is in sleep status e Location of the connectors depends on the TV model 32 HANNSpree Connecting the Power Adapter 1 Connect the power cord to the power adapter as illustrated 2 Plug the power adapter connector into the DC IN input jack on the 3 rear panel of the TV Insert the three pronged plug at the other end of the power cord into a power outlet Notes Location of the connect
35. re can result if the TV is misused To prevent potential danger read and follow the instructions and warnings contained in this manual when setting up operating or cleaning the TV In addition please read all Safety Notices contained in this manual carefully before using the TV E Power Supply Safety Notes 1 To avoid electric shocks do not use an extended power cord or an outlet that does not match this TV s plug or leaves the plug exposed This TV has a 3 pin grounded plug The third pin connects to ground do not remove it or alter it in anyway If the power cord or plug is damaged or worn unplug it immediately and contact an authorized service technician for maintenance To avoid fire or electric shocks do not overload electric power outlets 6 Hannspree AN Installation Safety Notes Antenna We suggest that you use an outdoor antenna to get the best signal possible unless you have cable TV or a centralized indoor antenna system You may however use an antenna indoors if it is placed in a location free from interference Location Avoid prolonged exposure to sunlight or other strong sources of heat Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat N WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids
36. rgy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help WARNING The Federal Communications Commission warns that changes or modifications of the TV not expressly approved by the party responsible for compliance could void your authority to operate the equipment 1 applies only to products purchased in the United States of America HANNSpree 3 DOC Compliance Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications This device complies with Canada ICES 003 Class B CE Conformity Statement This device complies with the requirements set out in the Council Directive on the approximation of the Laws of the
37. scribed herein shall not be distributed modified reverse engineered or reproduced in any manner without the prior written authorization of Hannspree or of other third parties The Hannspree logos presented herein are trademarks of Hannspree All other product names trademarks or logos mentioned herein are used for identification purpose only and may be the trademarks or registered trademarks of their respective owners The purchase of the product described herein shall not be deemed to grant either directly or by implication estoppel or otherwise any license under the copyrights patents patent applications or trademarks of Hannspree except for the normal non exclusive use that arises by operation of law in the sale of a product 1 4 nannspree Introducing the TV Thank you for purchasing this LCD TV Your LCD TV is designed to be safe versatile and easy to use The design makes it a fun addition to any room You can watch PAL broadcast or cable television channels and easily connect a VCR VCD or DVD player to the standard CVBS and S Video input ports located at the rear and or side of the unit You can also use the TV as a monitor for your PC by connecting it through the DVI port Convenient control buttons located on the TV and a handy remote control let you change channels adjust the volume and change display settings through an easy to use on screen display menu system The built in stereo speakers provide full rich so
38. service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so HANNSpree 9 Personal Safety 1 Onannspree To avoid overloading the power supply never plug too many electrical devices into an outlet power strip or extension cable Dangerous high voltage electric power components are located inside the TV To avoid electric shock do not disassemble the TV in any way Do not place or drop metals small objects or flammable materials into the vent of the TV If the TV is dropped falls down or is otherwise damaged unplug the power cord immediately and contact an authorized service technician If any fluid is sprayed or dropped into the TV contact an authorized service technician The screen of the TV is made of glass Avoid hitting or scraping it If the screen is broken do not touch the broken glass Do not allow children to use the TV unattended Installation Do not place the TV in locations where there is excessive steam or
39. the Power Adapter aannnnnnnnnsannnnnrrnnsnnnnnne 33 Inserting a Compact Flash Card CEcardi es 34 9 Using tHe KEE 35 Using the Remote Control 35 itediviebh RRE Ile KENE 35 Selecting r Tale LEE 35 Switching SOULCE Signals wc ccsceiescceanstinseriaiscedwendentacceeevewewons 35 Adjusting the Volume 36 USING PIP CNG POP EE 36 Using the Flash card Feature 0 c cece cece cence eee eeaee es 38 Slaning Flash CANO WEE 38 Remote Control Keys 39 Viewing PHOIOS EE 40 Zooming and PANNING c cece eee eee eee ee tense eeeeeee sean enaees 40 Rotating Images ccceccece cece eet eeseeeeeesseeseeeetesanesseeaees 41 VIEWING a Slide SNOW ccc ccecee cece cence eee eeeeeeeeateaeeaees 41 Listening to MuSiC EE 42 Wate ll te Ke E 43 Viewing CF Card Files 43 Using the Setup Menus cece cece cece eeeeeeeeeeeesasenseees 44 MUSIC OCUP WEE 44 HANNSpree 1 Table of Contents Slide Show Setup ebe GEESS 44 Movie SCI cco ocnsenscacaresecascsecsanesseabisaesct eA eni eii 45 D Le EE 45 10 Adjusting On Screen Display OSD Geng 46 OSD Setting Menu 46 Picture Seting EE 47 Si eat 48 et EE 49 wl 50 CN IE e EE 51 EE 52 Backlight PC mode oo gue gS NEe REN ENEE EN ENEE ririri ENEE NN EES En 53 BSAC MO E 54 Color Temperature E 55 EE 56 PUNTO SO UR EE 57 Ree EE 58 SE 59 SEET 60 BBE TruSurround and EALA 00 cece cece eee eeeeeeeeeeeeeeeeees 61 EnD GS EE E E
40. tings such as interval time repeat options and transition effects HANNspree 1 Listening to Music 1 2 Use the remote control arrow buttons to select MUSIC Press enter A screen appears displaying a list of the music stored on your CF card Use the arrow buttons to select a music file The selected file starts playing When the file finishes playing the next file in the list is played Press enter to open the Music Equalizer screen This screen enables you to view information about the file you are playing Note Refer to Music Setup on page 44 for information on changing the Repeat mode setting 42 HANNSpree MUSIC LIBRARY 01 LE PAPILLON Repeat One Page 01 01 00 01 11 MUSIC EQUALIZER Name AA Araist Time 3 29 Type MP3 DU 150 400 1K 2K 6K Repeat All EQ standard Song 001 008 Watching Videos 1 2 3 Use the remote control arrow buttons to select VIDEO Press enter A screen appears displaying thumbnails of the videos on your CF card Use the arrow buttons to select a video file Press enter The selected video file begins playing Note Refer to Movie Setup on page 45 for information on setting Movie playback settings such as the interval time and repeat mode Viewing CF Card Files 1 2 Use the remote control arrow buttons to select FILE Press enter A screen appears displaying a list of the files on your CF card The file type
41. uality video and CD quality sound 85 HANNSpree BBE SRS EALA Statement BBE M e Manufactured under license from BBE Sound Inc e Licensed by BBE Sound Inc under USP4638258 5510752 and 5736897 e BBE and BBE symbol are registered trademarks of BBE Sound Inc e BBE High Definition Sound restores clarity and presence for better speech intelligibility and musical realism is atrademark of SRS Labs Inc TruSurround SRS technology is incorporated under license from SRS Labs Inc EALA is a trademark of New Japan Radio Co Ltd Gala 86 HANNSpree MEMO MEMO
42. und and a convenient audio output port lets you connect to an external audio system or earphones Features e Built in TV tuner e Audio Video support Stereo audio inputs Composite video inputs Component video input S Video inputs 3 5 mm stereo headphone output DVI input e On Screen Display OSD menu system e Supports multi channel broadcasting sound system Stereo Mono or bilingual languages e Built in stereo speakers e PIP POP e Image Enhancement Technology 3 2 pull down 3D Comb Filter e Noise Reduction e Advanced de interlacing e Edge Enhancement e Flash card Reader selected models only Hannspree 19 Checking Package Contents Make sure the following components are included in the box Please contact Hannspree Customer Service immediately if anything is missing or damaged e TV e Users manual e Quick start guide e Warranty and service manual e Power cord e Power adapter e Remote control and batteries 16 HANNSpree Getting Started Control Panel Description Power Power LED Mute Source Menu Select channel Adjust volume AV5 Flash card slot selected models only Icon ty amp POWER MUTE MUTE AUTO MUTE AUTO T SOURCE M MENU channel up A amp CHA channel down V V CHY volume up A Vol volume down V Vol Function Turns the TV on and off Indicates power status In TV AV mode press this butto
43. video cable Use the AV4 input to connect an external device such as a VCR or a VCD DVD player Audio Input L R white and red audio cables Video Input S Video or Video S Video cable or yellow video Connects to an antenna or cable television line Description DC IN DVI LINE IN LINE OUT R L Earphone jack Connector Function Connects to the included power adapter Connects to a PC s DVI port Connects to a PC s line audio out port Connects to external stereo speakers Connects to earphones HANNSpree 19 Remote Control Description Menu Arrow Number Last CC TTX Power Adjust volume 20 HANNSpree Icon MENU A lV 1 lt 4 gt D O wo a N O LAST Com Function Press this button to open up the setup menu of TV mode or flash card mode PressA V 4 and P to scroll through the on screen display menus In flash card mode use the arrow buttons to navigate menus and to pan a picture when zooming in on a photo in Photo mode Use to select a channel directly Press 0 9 to enter the channel number press 1 and O for channel 10 Press this button to return to the last channel selected Press this button to enable the closed captions subtitles Only available in the United States of America In flash card mode use this button to rotate a picture when in Photo mode This option may not be available in your local area Turns the TV po
44. wer on or off Press volume up to increase the audio volume Press volume down to decrease the audio volume Description Mute Select channel Sound RGB Wide Position Hold PIP POP Icon CH RGB WIDE POSITION Lea HOLD ROOT PIP POP SLIDE Function Press this button to eliminate sound Press mute again or press the volume adjust buttons to restore sound Changes channels Press channel up to increase the channel number Press channel down to decrease the channel number In PC or AV mode press either button to return to TV mode Press this button to change the audio characteristics of the TV Press this button to switch to RGB mode PC DVI I input or flash card mode Press this button to switch between wide screen and other modes 4 3 16 9 ANAMORPHIC Press this button repeatedly to cycle through the PIP position options In flash card mode use this button to go to the next page in the menus Press this button to hold or skip forward through tracks being played from the memory In flash card mode use this button to return to the flash card main screen Press this button to use the PIP or POP functions In flash card mode use this button to start and stop the slide show Hannspree 21 Description Swap Favorite TV AV Return Sleep Display 22 HANNSpree Icon SWAP lt lt FAV TV AV DISP Function Press this button to sw
Download Pdf Manuals
Related Search