Haier L42K3 User's Manual
Contents
1. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL To avoid electric hazards it is strongly suggested that the back cover not be opened as there is no any accessory inside the casing If necessary please contact authorized after sales services A lighting flash mark in a triangle Apotentially hazardous situation which if not avoided could result in serious injury by high voltage An exclamation mark in a triangle Major part or accessory of which technical specifications must be followed if it is to be replaced Warning To avoid fire or electric hazards never place your television receiver in an area with heavy moisture Attention should be paid to avoid accidental scratches or impacts onto the screen Caution A Please read this manual carefully before using your television and keep this manual in a good place for future reference A To achieve the best performance of your television read this User s Manual carefully and properly store it for future reference A Information of screen displays and figures in the User s Manual may vary due to technical innovations Caution Unauthorized disassembly of this product is prohibited B important Safety Instructions The product should be tightly fixed to avoid To avoid fire hazards do not use this drop damages2. Y to move the cursor to the Exchange option and then press lt gt to start exchange and exchange the program on current channel to the channel you set for exchange B Watching TV Program You can watch TV program in a presetting channel How to selectthe desired program 1 Using Program number buttons Directly enter the channel number with the numeric keypad on the remote control If to select channel numbers of double digital or three figure press continuously the numeric buttons in three second 2 Using P A P V buttons Press PA to select a channel number in number increasing direction Press P V to select a channel number in number decreasing direction How to selectthe desired sound Press VOL buttons on the remote or the front of the TV set to adjust the volume level The range is 0 100 When the volume buttons are pressed the volume level is displayed automatically on the TV screen Mute Setting 1 Press MUTE button on the remote control and a icon will display on the screen At this time the sound of the TV set is turned off 2 If you want to recover the sound press MUTE button again or directly press VOL button Quick program view 1 Suppose that you previously watched a TV program on Channel 8 but now you are watching a TV program on Channel 18 as shown in the right figure 2 If you want to return to Channel 8 just press Q VIEW 8 Flashback once 3 If you want to return to Channel 1
3. press A Y to select ON or OFF if you select ON press lt gt to set hour and minute and then press A Y to adjust time 3 After finishing time setting press OK or MENU to confirm Slee Current Time Off Time On Time On channel Remind Time Remind Channel IS Picture s Audio Channel a C fi Adjust Timer 4 Press A W to select the Remind Channel option and press lt gt to set the found i Function Menu Function Menu Set 1 Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press lt gt to select the Function menu Language lt English gt Blue Screen Menu Timeout 2 Press A W to select the option to be adjusted and AAA Picture Optimize S then press lt gt to adjust it MEMC OPC Eye Guard Mode Tetris l Blue screen Press 41 gt to set ON or OFF if you select ON the TV screen will be blue if no signals are available Menu timeout The option is for adjusting the menu display time Press lt gt to set the desired time 5 15s AAA Picture Optimize 1 Press MENU on the remote control unit to display the main menu and then press lt 4 P to select the Function menu 2 Press A W to select the AAA Picture Optimize option 3 Press to enter the submenu 4 Press A W to select the option to be adjusted and then press lt gt to adjust it AAA Picture Optimize DCDI lt On
4. 3 Press 4 gt to change page and press A Y to select the movie you want to play and then press OK to enter the playing display interface Press 4 gt to select the lastor next movie Press D CALL to display relevant information while playing 4 To exit playing just press BACK repeatedly Note The menu display varies with the number and names of files in your equipment Streaming Media Playing System Playing Music 1 After entering USB main interface press lt 4 P to select a harddisk partition and then press A W to select the Music option 2 Press OK to confirm the selection and enter the music playing interface 3 Press lt gt to change page and press A Y to select the music you want to play and then press OK to play the music 4 To exit music playing just press BACK repeatedly Text 1 After entering USB main interface press lt gt to selecta harddisk partition and then press A to selectthe Text option 2 Press OKto confirm theselection and enterthe text playing interface 3 PressA W 4 gt to select thetext you Want LO read and then press OK to play the text reading interface Press A W to change page and press BACK to exit the reading interface 4 To exitthe Text mode just press BACK repeatedly Settings 1 After entering USB main interface press A Y to select the Settings option 2 Press OK to confirm the selection and enter the k 6 e settings selec
5. a Cable Box Connections Foroptimum picture quality adjust antenna direction if needed Single family Dwellings Houses Connect to wall jack for outdoor antenna outdoor antenna not supply 75Q standard coaxial type Multi family Dwellings Apartments Connect to wall antenna socket az SIS mr fowr fed Lar pad C SIS C3 300Q twin lead cable 75Q coaxial cable m A Sa On On Antenna adapter RL K additional purchase not supply It is recommended that you d better use 75Q coaxial cable to remove the disturbance caused by airwave Don t bind antenna cable and electric wire together elo improve picture quality in a poor signal area purchase E and install a signal amplifier e If the antenna needs to be split for two Tv s installa 2 ny var uor WaySignal Splitter in the connections e If the antenna is not installed properly contact your dealer for assistance 6 ee e D External Equipment Connections NOTE Allcables shown arenot included withthe TV Choose Your Connection There are severalways to connectyour television depending on the components you want to connectand the quality of the signal you want toachieve The following are examples of someways to connectyour TV Choose the connectionwhich is bestfor you VCR Connection To avoid picturenoise interference leavean adequate distance between the VCRand TV Connectio
6. and Auto Aapust i then press lt P gt to select the Adjust menu as shown in ee a the right figure 2 Press A Y to select the option to be adjusted Picture m Audio Channel yieFunction rai Adjust Timer 3 Press lt gt to adjust it Aspect Ratio Press this key to select the screen display proportion Auto Adjust This is used to reset the default setting parameters Clock This is used for adjusting H Position and V Position as well as relative parameters in PC modes Phase This is used for adjusting the phase of pixel clock in PC mode Adjust Vertical and Horizontal position of picture can be adjusted in this item Precautions 1 When making H Size V Size H Position or V Position adjustment there sometimes may be abnormalities in case of a large adjustment range which is not a fault but for the signal sync out of range and the picture will become normal by reverse adjustment 2 In PC mode there are only two aspect ratios 4 3 full screen available 3 There will be a display proportion of Dot By Dot when the singal is 10801 50Hz in the source of YPbPr or HDMI This proportion is for Full HD panel test in factory Plseae do not use this proportion otherwise the display will be distortionary Only for L42M9 L46M9 L55M9 LB42R3 LB46R3 LP55R3 22 A Lock Setup The television hasthe function ofsecurity default lock Password needs tobe entered when the programlock mode isto be
7. gt DNR lt Low gt Color Management lt On gt DSM DSM is a picture effect demo function The image quality of pictures in the frame and on the right is improved for DSM has made dynamic trace processing on their hue and contrast The picture out of the frame is common without any processing Press lt 4 gt to set OFF Note When the demo function is activated once the user changes channel switches aspect ratio or signal source or searches for channels again etc this function will be automatically disabled il Picture nt Audio BBB Cnanngl m Function ri Adjust Timer MEMC only for LP55R3 and L55M9 Improve the faintness of loco motive picture Press lt gt to set ON OFF DEM01 DEMO2 OPC With this function The TV set can adjust the strength of backlight according to the picture so that it can decrease power consumption of the TV set effectively User can press to select the suitable options of Dynamic Daylight Normal Night and User according to the intensity of enviroment light OPC Mode Adjust SS 10 Picture m Audio E Channel Function r Adjust Timer i Function Menu Eye Guard Mode In line with the change of using environment the TV set will adjust automatically the image display mode to protect viewers eyes from any negative impact 1 Press gt to enter the sub menu see the picture on left 2 Press A W to select the option to be adjusted and the
8. gt to enter the palette menu as shown in the right figure and then press lt gt to select a benchmark in the range of 2500K15000K from warm color to cold color afterwards press A Y to adjust if a different benchmark is selected for adjustment the original adjustment data will be automatically cleared Reset Return to factory default settings Sound Control Functions How to choose audio mode 1 Press MENU to display main menu on the screen and then press lt P gt to select the Audio menu afterwards press A Y to enter the option to be adjusted 2 Press A Y to move the cursor to the option to be adjusted and then press lt gt to select User Standard Music Theater mode User A spare setting that can be adjusted to personal tastes Standard Normal sound with moderate bass and treble setting Music Designed the sound to best suit music programs Theater Enables extra bass and treble to enhance the movie experience You can also press S MODE button on the remote control to select User Standard Music and Theater mode How to customize your own audio status 1 Press MENU to display main menu on the screen and TER y then press lt gt to select the Audio icon afterwards S press A W to enter the option to be adjusted Nie off 2 Press lt gt to adjust Reset Volume Press lt gt to adjust the volume of a TV program Balance This will adjust the output of the right and left soeakers to obtain t
9. music being played 4 Press PLAY PAUSE to pause playing and press it again or press OK to continue playing 5 Press ZOOM to magnify pictures in zoom mode press 4 gt and A V to move the picture 6 Press D CALL to display or exit the screen display information while playing 7 Press BACK to stop playing or return to the previous menu and press BACK repeatedly to return to the main menu 8 After the on screen display disappers press ZOOM to magnify the image then press A V 4 P to move the image under the magnified mode ZT Streaming Media Playing System Playing aPicture 1 After entering USB main interface press gt to select a harddisk partition and then pressA Y to select the Picture option 2 Press OK to confirm the selection and enter the picture playing interface a j Picture 3 Press lt gt to change page and press A Y to select the picture you want to play and then press OK to enter the playing display interface Press ZOOM to magnify the picture and then pressa gt A V to move the picture Press lt gt to select the last or next picture Press A Y to rotate the picture PR 9 aa 4 To exit playing just press BACK repeatedly QY e GE L Playing a Movie 1 After entering USB main interface press lt Pto select a harddisk partition and then press A Wto select the Movie option 2 Press OKto confirm the selection and enterthe movie playing interface
10. sremote control 3 Use PC DVIlon the remote control to select VGA source 4 Check theimage on your TV There may be noise associated withthe resolution vertical pattern contrast orbrightness in PC mode If noise ispresent change the PC mode to another resolution changethe refresh rate to another rate oradjust the brightness and contrast on the menuuntil the pictureis clear If the refresh rate of the PC graphic card can not bechanged change the PCgraphic card orconsult the manufacturer of the PC graphic card NOTES 1 Avoid keeping afixed image onthe TV sscreen for along period of Time The fixed image may become permanently imprinted on the screen 2 Thesynchronization input form for Horizontal and Vertical frequenciesis separate 3 To obtain thebest picture donot play the USB YPbPr HDMI or PC sourceat the same time Monitor Out Setup The TV has a specialsignal output capabilitywhich allows youto hook upa second TV or monitor Connect the second TV or monitor to the TV s AV OUT See the Operating Manual of N C L C the second TV or monitorfor further details VEO L_ AUDIO ER regarding that device sinput settings Notes E YPbPr PC HDMI S Video input sourcescannot be used for Monitor out R When connecting with external audio equipments such as amplifers orspeakers please turnthe TV speakers off S VIDEO VIDEO L AUDIO R External Equipment Co
11. with a card 2 After inserting a card the screen displays the inserted partition s letter in USB interface mode indicating the card has been identified at which time you can play or make other operations 3 There are many types of digital cards in the market It is recommended to use quality products from qualified manufacturers In case of reading difficulty or restricted reading speed please change to another card Data Protection of USB Digital Card 1 Do not remove or touch the rear part of digital card when it is working otherwise it may cause data loss or damage to the card 2 Please insert the digital card in a correct way each time you use streaming media 3 Haier shall not be held liable for any data loss or quality problems of digital cards Warning After the use of a digital card or USB disk please place it in a safe place to avoid any danger resulting from being swallowed by a child Streaming Media Playing System Start Exit Streaming Media Playing System 1 Press USB on the remote control unit to select the streaming media function 2 Insert USB equipment into corresponding USB interface 2s after starting the system 3 After entering the system menu press lt gt on the remote control unit to select the required USB equipment and then press A Y on the remote control PB eicturc unit to select the required file v 4 Press OK to enter the selected file 5 To exit the streaming media playing syst
12. 160W 1122x330x789mm 29 0Kg 55 R3 M9 220W 1328 6x365x895mm 39 0Kg 660x200x497mm 8 0Kg 798x230x5 75mm 12 6Kg 42K3 120W 1021x290x704mm 20 5Kg NOTE the data of machine consumption obtained is measured in OPC mode NOTE Design and specifications are subject to change without notice The dimension in this manual is a approximation i Format Recommendatory HDTV SDTV YPbPr YCbCr format Sequence BZ Format pee Frequency 1 480i 480p 60 576i 576p 50 720p 50 60 2 K 4 1080i 1080p 50 60 Recommendation PC connection input format sequence H Frequency V Frequency number Format KHZ Hz 1 640 480 60Hz 31 5 60 800 600 60Hz 37 88 oF g 1024 768 60Hz 48 36 60 Recommendatory Recommendation DVI connection input format a Besian C Frequency 1 640 480 60 2 800 600 60 3 1024 768 60 Sequence Recommendation HDMI connection input format Refresh Frequency Number Format Hz 1 480i 480p 60 2 576i 576p 50 3 720p 50 60 4 1080i 50 60 05 0090509260A
13. 8 again just press Q VIEW Flashback once again Note This function is only available in TV mode 18 Picture Control Functions This means the adjustment of specific contents in the picture if already in normal condition it is not necessary to make any adjustment Due to different TV signal inputs some items may need to be adjusted The following makes a description by only taking TV signal as an example How to select the picture mode 1 Press MENU to display main menu on the screen and then press lt gt to select the Picture menu afterwards press A Y to enter the option to be adjusted 2 Press A W to move the cursor to the option to be adjusted and then press lt gt to select Standard Bright Soft User Eye Guard mode You can also press PMODE on the remote control to select Standard Bright Soft User Eye Guard mode Standard The picture brightness and hue are moderate Bright The picture is vivid bright and dynamic Soft The picture is soft and in light color User The picture effect is set by yourself to your preference Eye Guard The option does not exist when using a USB device In line with the change of using environment the TV set will adjust automatically the image display mode to protect viewers eyes from any negative impact How to customize your own picture status 1 Press MENU to display main menu on the screen and then press lt 4 P to select the Picture menu aft
14. I Audio device to these jacks 3 VGA IN Connect the monitor output connector from a PC to the jack 4 AV In Connect Video Audioout from an Video Audio device to these jacks 5 S VIDEO Connect S Video out from a S Video device to these jacks 6 AV OUT Video Audio output terminal 7 ANT In Connect cable pr antenna signal to the TV either directly or through your cable box 8 HDMI Connect a signal to HDMI 4 i Remote control Battery loading 1 Slide open the cover of the battery compartment on the back of the remote controller 2 Load two 7 AAA alkaline batteries in the compartment plus and minus poles to respective mark 3 Replace the cover of the battery compartment E Precautions As strong light may interfere the Make sure that two AAA alkaline signals change your position to batteries are loaded The batteries must operate the remote controller if be of the same type The batteries must the television cannot be turned be located properly The batteries are not on or off as you expect rechargeable OT ON SH a Keep the remote controller away from Make sure that there is no obstacle heat source or humid area to ensure between the remote controller and effective performance of the remote television set controller D Remote control function The remote control cannot be operated unless the batteries are properly loaded When using the remote control aim it at the remote con
15. TFT LCD TELEVISION OWNER S MANUAL MODEL L26M9 L32M9 L42M9 L46M9 L55M9 LB26R3 LB32R3 LB37R3 LB42R3 LB46R3 LP55R3 L26K3 L32K3 L42K3 Please READ this manual carefully before operating your TV and retain it for future reference CONTENT Warning 1 Important Safety InstructionS 2 Panel Control and Rear Terminals Control 4 Remote Control 5 Remote control function 6 External Equipment ConnectionS T Antenna Connection 7 VCR Connection 8 DVD Setup 9 HDMI or DVI Setup 9 PC Setup 10 Monitor Out Setup 10 Connecting Headphones 11 Basic Receiving and Playing Operations Switching ON OFF the T
16. V set 12 Choose the Menu Language 12 Choose the Input Source 12 Searching Channel 13 Watching TV Program 15 Picture Control Functions 16 Sound Control FunctionS 17 Timer Functions 18 Function Menu 20 Adjust MenU 2 2 22 Lock Setup 23 Streaming Media Playing System 25 Maintenance 4 7 74 74 77 77 2422 30 Troubleshooting 31 SpecificationS 32 Format eenn neee een 33 Accessories NEETA oy 151 Alkaline battery Remote controller Owner s manual AAA 2 7 Warning
17. and even fire product under direct sunlight or closely to heat sources Do not locate the product close to water Unplug the power supply and antenna of or oil which may cause fire hazards the product when there is a rainstorm especially Thunderstorm Do not use damaged or worn electric plugs Do not connect excessive sockets in parallel and keep electric cord away from heat sources or share the same socket by multiple plugs to avoid electric shocks or fire hazards to avoid fire hazards The product must be placed on a solid and Unauthorized disassembly of the television stable surface to avoid collapse is prohibited to avoid electric shocks or fire hazards Contact TA thorized aft l L cG authorized after sales 0 service if technical Gd L service is needed i a e Keep the product away from a transformer was e or heat source to avoid fire hazards YEN 1 7 L Disconnect the product from power supply and contact authorized after sales service if abnormal sound is heard in the product important Safety Instructions Don t use or store inflammable materials near the product to avoid explosion or fire hazards The antenna of the product should be away from electric cable to avoid electric shocks Always make sure that the televisionis well plugged as poor electric connection might cause fire 7 Ie S Zj Unplug the television use soft fabric never chemicals if you are going to make
18. ator will light 2 Press POWER on the remote control again 3 If you want to exchange to standing by status please press down POWER on the remote control 4 Disconnect the power supply or unplug the television if it is intended to completely cease the television performance Choose the Menu Language When you satisfied with your set for the first time you must select the language which will be used for displaying menus and indications 1 Press MENU and lt gt to select Function menu Language S lt O 2 Press A W to select the Language S AAA Picture Optimize ox DSM lt oe Off gt lt n gt lt English gt gt MEMC 3 Select a particular language by pressing gt repeatedly OPC Eye Guard Mode Tetris i Picture s Audio RB Channel m Function 5 Adjust Timer 4 When you satisfied with your choice press MENU to return to normal viewing Choose the Input Source If the TV isnot in TV mode press SOURCE on the remote control unit and signal source menu willbe displayed on the TV screen as shown inthe right figure Press A Wto selectthe TV option and press gt or OK to TV confirm the switchingto TV input terminal After a switching the signal source menu disappears and at Sse the upper right corner of screen displays the information YPbPr YCbCr1 of current signal source YPbPr YCbCr2 Pressing this key repeatedly can exit from the signal HDMI 1 HDMI 2 s
19. cleaning of the product Make sure that no water drops in the product a S X Disconnect the television from power supply and antenna when there is a rainstorm or thunderstorm to avoid electric shocks or fire hazards Don t place the product in a humid area to avoid fire hazards Never touch the plug when your hand is wet as this might cause electric shocks 1 When antenna is used measures should be taken to prevent water from flowing down along the cable into the television The plug and electric cable must be kept clean to avoid electric shocks or fire hazards Disconnect the television from power supply to avoid electric shocks or fire hazards in a long vocation Panel Control and Rear Terminals Control Thisis asimplified representation of front panel Here shown may be somewhatdifferent from your TV Panel Control 26 32 37 42 46 55 Source Button O lt Card jack O z Menu Button USB jack Ox O Volume Up Down Os Button amp AV INjack T S VIDEO jack O Program Up Down gO Earphone jack Oe Button HDMI jack E Cs Standby Eel Rear Terminals Control 55 26 32 37 42 46 6 G 00 1 COMPONENT In Connect a component Video Audio device to these jacks 2 VGA DVI AUDIO Connect a VGA DV
20. ctory default settings Q Timer Functions Setting of CurrentTime The current time is calculated from the moment upon turning the TV on At first check whether the time indicated on the TV s clock is consistent with the standard time of your time zone if not adjust the clock as follows 1 Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press lt gt to select the Time menu afterwards press A to select the Current Time option 2 Press K to set hour and minute 3 Press A Y to adjust the time 4 Afterfinishing time setting press OK or MENU to confirm Sleep Setting 1 Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press lt gt to select the Time menu afterwards press A F to select the Sleep option 2 Press lt P gt to set your desired time Pressing lt gt allows you to select the time from the following options in turn off 5min 10min 15min 30min 45min 60min 90min 120min 180min and 240min Notes 1 You may also set the sleep function by operating the Sleep key on the remote control unit 2 If the Sleep function is set OFF the function is not available If a time period is selected the TV will automatically enter standby mode upon reaching the preset time and will resume work when POWER is pressed 3 If the Sleep function has been set press SLEEP once the remai
21. em and watch a TV program you must return to the streaming media main menu at first to protect equipment and then press SOURCE to select TV or directly press USB to return to the TV mode Notes 1 While playing non picture or non movie files press MENU or SOURCE the TV screen will be black and display corresponding menu moreover in USB mode only when playing a movie can such shortcuts as Picture Mode etc work and only MUTE can work in other menus After entering the Picture option pictures without thumbnails will not be accompanied with a small window thumbnail and pictures in both bmp and png formats do not have thumbnails In addition it s best not to operate menus in the progress of opening pictures to avoid system chaos 2 If a USB and a digital card are inserted at the same time and each has a partition letter the USB will be defaulted as Disk C whichever is inserted first 3 While playing a USB or digital card press SOURCE the screen picture will return to USB main interface and only at this time can you switch corresponding signal sources by pressing SOURCE again 4 While playing a file in txt format press MENU the screen will directly return to txt main menu Operating Method of Streaming Media Menu 1 Press A W to scroll through main menu or submenu and select your desired option 2 Press OK to confirm your selection 3 Press REV FWD to achieve the FF fast forward and FB fast back of the movie or
22. erwards press A Y to enter the option to be adjusted Brightness i Contrast lt 50 2 Press A Y to move the cursor to the option to be Sharpness lt mumm gt 50 adjusted and then press lt gt to adjust it to your desired elon lt gt 50 icture Mode lt Standard gt effect Baath Standard IBI Picture s Audio 8 Channel Function r Adjust Timer Brightness This will adjust the light output of the complete picture which will mainly affect the darker areas of the picture Contrast This will adjust the intensity of bright parts in the picture but keep the dark parts unchanged Sharpness This will adjust the sharpness of fine details in the picture Hue select able in NTSC mode only Allows you to select the color mix Tine of the picture Chroma This will adjust the saturation level of the colors to suit your personal preference Picture Mode Select the mode of picture Standard Bright Soft User Eye Guard Palette Press A Y to select the Palette option and then press K to enter its submenu and finally press A Y to select a toner pattern from six patterns User Standard 6500K 7300K 8500K and 9300K to your color preference Normally the Standard mode is selected Palette User Standard 6500K 7300K 8500K T RT A T JOK 150001 9300K il Picture s Audio 558 Channel Function r Adjust Timer If the User mode is selected press lt
23. gt Current Time 10 30 l Off Time eel of On Time Off On channel lt 000 gt Remind Time i Off Remind Channel lt 000 gt Ml Picture s Audio HOE YxFunction EOR Note After setting the On Off Time function if the TV is AC off or forcible DC off the function will be automatically cleared This function is used in combination with the On Off Time function When the TV turns on upon reaching the On time it automatically enters the preset channel 1 Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press lt gt to select the Time menu afterwards press A to select the On Channel option 2 Press 41 K to set the On Channel or OFF Setting of Remind Time and Remind Channel Sleep Current Time 10 30 Off Time i Off OnTime S IS On channel lt 000 gt Remind Time I Off Remind Channel lt 000 gt IS Picture s Audio E Channel YxFunction 88 Adjust Timer The remind time and remind channel functions allow the TV to automatically enter the preset channel at preset time If the TV is AC off or forcible DC off the preset time will be cleared 1 Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press 41 P to select the Time menu afterwards press A Y to select the Remind Time option 2 Press K to enter the setting screen and then
24. he best stereo reproduction for your listening Picture sd Audio Channel Function rB Adjust Timer position Haier mens Sound Mode The intermediate value is 0 When indication value of User S A BAA z Standard Balance increases toward 50 sound of the right and Music left speakers becomes stronger and weaker respectively l l fl I l l When indication value of Balance decreases toward 50 EPL ea Picture s Audio RH Channel Function fe Neha OM Mts sound of the right and left speakers becomes weaker and stronger Sound Mode This select the modes for sound reproduction dependent on the broadcast signals or signals from external inputs received Select the mode of sound User Standard Music Theater If the User mode is selected press K to enter the sound mode menu as shown in the right figure and then press lt gt to select a benchmark in the range of 50 15K from bass to treble afterwards press A W to adjust if a different benchmark is selected for adjustment the original adjustment data will be automatically cleared SRS TS XT The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TYS speakers AVL Automatic Volume Limit This will reduces the differences in volume level among broadcasters MAXX Bass To adjust the superbass Press to select superbass on or off Reset Return to fa
25. is necessary to enter the Lock Set menu to set Tuning Lock OFF or execute the Unlock option Preset Source Setting Preset Source may be set as Off TV AV1 AV2 S Video YPbPr YCbCr HDMI PC and USB When the Preset Source is set as TV after entering the Preset Channel menu press lt gt to select the preset channel and the channel will be forcibly switched to the preset one upon turning the TV on when the Preset Source is set as other signal sources the TV will be forcibly switched to the preset source upon turning on For example when the Preset Source is set as YPbPr YCbCr the TV will be switched to YPbPr YCbCr upon turning on when set as OFF the preset function will be closed A Lock Setup Preset Channel Setting Only when the Preset Source is set as TV can the Preset Channel option be available Press lt gt to select preset channels from 0 254 Source Lock This function is used to prohibit watching a program from various external inputs e g AV S Video and PC etc Press A Y to select a certain option and then press lt gt to set an external input lock ON or OFF If an external input lock is set ON after entering this mode the screen will display blue background with muting and a prompt Source Lock during Source Lock prompt Source Lock will remain if there is no other display on the screen To watch a program from a locked external input just enter Source Lock submenu to set corresponding status as OFF or execu
26. key continuouslyto select the 3 A g picture mode i 15 TV MENU Press this keyto display orexit the main menu Ty MENL D MENU 16 D MENU Press this key to displaythe Special Function 5 L T Menu it functions when special modules are inserted a 17 THUMBSTICK Up Down Left Right Q 18 OK Press this key to confirmthe selection 19 Clears all on screendisplays and returnsto TV viewing from any menu B 20 USB Control the USB System lt Backward gt Forward KH Play Pause BACK Back REC no available ZOOM Press tomagnify minify an image EXIT lt z BACK D CALL Press todisplay program information 19 O 21 TV CALL Display on off 6 22 no available Sea 29 53no available 24 no available ZOM BAN MESI Aa 21 25 no available O Q LT 6 26 no available VOD AUDIO GUIDE PAGE 27 no available SRC T CO CO CO 28 no available TVFM INFO CH LIST PAGE 26 29 no sen pre lt L JA 30 no available 28 FAV ee INTERACTION SLEEP S 31 Press this keyto display the favorite program listmenu 6J C_ C CO C MHo 32 no available 32 Fn S GAME BUSIN E 33 Displaying the sleeptime 25 L K Se L 87 34 no available G 98 35 no available 36 no available 37 no available 38 no available E Note From 22 to 38 except 31 and 33 are belonged to DSMB function button It willact when the module installed only Pls refer to DSMB user s manual External Equipment Connections Antenna Connection Antenna or Cable Service without
27. lf according tothe instructions listed hereunder before contacting the after sales service for technical assistance Problem Possible remedies Turn onthe power supply No picture Properly plug the TV setto the powersocket no sound Check to see ifthe power cable of other appliance is plugged inthe TV set Make sure thatthe power cable of the TV setis properly connected Good picture Depress the volume button no sound Check out the audio frequency inputsignals Failure of remote Check to see ifthe remote controller display controller receiving window are blocked by other objects and if batteries are properly loaded No color weak Designate the item of color from the Picture menu color or poorpicture and depress the volume button Keep the display and VCR separate a reasonable space Activate some functions to store picture brightness Make sure that the display and signal source are available and turned on Excessive brightness Adjust brightness orcontrast or darkness Picture too big or small Adjust the setupof sizes One speaker failure Balance the sound inthe menu Slight sound from display It isa normal phenomenon Note Do not leave the television with static picture in an extended period as it may result in residual image on your television screen Note Production of the screen requires high and precision technologies However there might be some dark or bright red blue or green s
28. n Option 1 Set VCR outputswitch to channel3 or 4and then tunethe TV to the same channel number Connection Option 2 1 Connect the audio and videocables from the VCR s output jacksto the TV input jacks as shown in thefigure When connecting the TV toVCR match thejack colors Video yellow Audio Left white and Audio Right red If you connectan S VIDEO outputfrom VCR tothe S VIDEO input the picture qualityis improved comparedto connecting aregular VCR to the Video input 2 Insert avideo tape intothe VCR and press PLAY onthe VCR Refer to the VCR owner s manual O 3 Select theinput source with ANT using the SOURCE button on the remote control andthen press CH button toselect the source press the VOL button to confirm HDMI3 COMPONENT IN annan j TT ETA D mn d External Equipment Connections DVD Setup How to connect 1 Connect the DVD video outputs Y Pb Cb Pr Cr to the COMPONENT Y Pb Cb Pr Cr input jacks on the TVand connect the DVD audio outputs to the AUDIO jacks on the TV as shown in the figure 2 If your DVD only hasan S Video output jack connect this to the S VIDEO input on the TV and Connectthe DVD audio outputs to the AV IN jackson the TV as shown in the figure i NOTE if your DVD player does not have component video output use S Video How t
29. n press lt gt to set up Power On E G Mode Set the poweron time in the Standard Mode Eye Guard Mode Curtain Mode according to the usage environment Change Ch E G When you switch to another channel the image stays still to avoid any negative impact to your eyes Watching E G When watching TV you can adjust the image display mode in line with the using environment Watching E G Delay You can choose between entering the Eye Guard Mode instantly or 3 5 seconds later Tetris After accessing the Function Menu press K to enter see the picture below Eye Guard Mode Power On E G Mode lt Standard gt Change Ch E G lt Off gt Watching E G Watching E G Delay lt il Picture s Audio H Channel m Function il Adjust Timer KEY PRESS INFO LEFT Left RIGHT Right DOWN Down PAUSE Up GAME RESTART Ok GAME EXIT Exit BLOCK TRANSFORM Ok TTT NEXT BLOCK T SCORE 00 LEVEL i Adjust Menu The TV can be used as a display and you may adjust relevant settings The operating method of various menus is the same as that described for TV signal The following are operating methods that different from that for TV signal When the TV is used as a display you may set and adjust its picture effect by the following steps Press SOURCE to switch the signal input to PC mode Aspect Ratio z Full Screen gt 1 Press MENU to display the screen main menu
30. ning time to sleep will display on the screen if you press SLEEP once again before the display disappears the sleep time set last time will be cleared and new time can be set 4 During 1min before the TV enters sleep mode there will be count down prompt such as Sleep 59s on the screen until the TV is off During the 60s the user may change the time or cancel the Sleep function by operating the SLEEP key Sleep Current Time Off Time On Time On channel Remind Time Remind Channel IS Picture s Audio FF Channel yeFunction rfl Adjust Timer Sleep Current Time Off Time On Time On channel Remind Time Remind Channel IS Picture s Audio Channel YeFunction cf Adjust Timer Timer Functions Setting of ON OFF Time This function allows the TV to automatically turn on or enter standby mode upon reaching the preset time 1 Press MENU on the remote control unit or MENU on the TV s front panel to display the main menu and then press lt gt to select the Time menu afterwards press A W to select the On Time or Off Time option 2 Press 41 gt to enter the setting screen and then press A Y to select ON or OFF if you select ON press gt to set hour and minute ON indicates the On Off Time function is enabled while OFF indicates the function is disabled 3 After finishing time setting press OK or MENU to confirm Setting of On Channel Sleep Off
31. nnections Connecting Headphones You canconnect aset ofheadphones toyour set if you wish to watch a TV program withoutdisturbing the otherpeople in theroom Plug a setof headphones intothe 3 5mm mini jack socket onthe rear panelof the set Note R Prolonged use ofheadphones at a high volume may damage yourhearing B Youwill not receive sound from the speakers when you connectheadphones to thesystem Power source TO USE AC POWER SOURCE AC Outlet Use theAC polarized linecord provided for Wider Hole operation onAC Insert the AC cord plug into and Blade a standard polarized AC outlet NOTES E Never connect the AC linecord plug toother than the specified voltage Use the attached power lt J P cord only yp E if the polarized AC Cord does not fitinto a non polarized AC outlet do not attempt to file or cut the blade Itis the user sresponsibility to have S an electrician replace tne obsolete outlet E if you causea static discharge when touching the unit andthe unit failsto function simply unplug the unitfrom the AC outlet and plug it back in The unit should return to normal operation Polarized AC Cord Plug p Polarized AC Cord Plug Switching ON OFF the TV set In the manual the OSD on screen display may be different from your TV s because itis justan exampleto help you with the TV operation Switching ON OFF the TV set 1 First connect power cord correctly and the power indic
32. o use 1 Turn on the DVD player insert aDVD 2 Use the S Video button onthe remote control to select S VIDEO or YPbPr YCbCr mode 3 Press Play button on external equipment for program play 4 Refer to the DVD player s manual for operating instructions HDMI or DVI Setup VGA IN Towatch digitally broadcast programs purchase and connect a digital set top box How to connect Use the TV s COMPONENT Y Pb Cb Pr Cr INPUT jacks VGAor HDMI port for video connections depending on your set top box connections available Then make the corresponding audio connections i ill M How to use 1 Turn onthe digital set top box Refer to the owner s manual forthe digital set top box 2 Use SOURCE on the remote control to select PC or HDMI se C Y Pb Cb Pr Cr mode o o E AUDIO L HDMI BKDV1 OUTPUT S VIDEO R AUDIO L Q DEO A USB CARD O VIDEO AUDIO R SS 3 Press Play button on external equipment for program play External Equipment Connections Pc Setup How to connect 1 Use the TV s VGAIN port forvideo connections HDMI3 COMPONENT IN 2 Then make the corresponding audio connection If usinga sound card adjust the PC sound asrequired How touse 1 Turnon the PC and the TV 2 Turnon the display by pressing the POWER button onthe TV
33. ormation error rate in which case you should restart the system there are a lot of nonstandard USB mobile equipment in the market they may not be identified when connected to the streaming media playing system the above phenomena may also occur on computers and are not the TV s fault 4 To achieve smooth playing ensure the following 1 The file code rate should be lower than 300KB S 2 Due to the limitation of USB signal transmission distance it is recommended not to use USB patch cord in case of using the cord make sure that its length is not over 1m 3 Use high speed USB equipment in conformity with USB2 0 Interface Standard if USB equipment in conformity with USB1 1 Interface Standard is used the playing may be unsmooth 5 Although many movie files are with such postfixes as avi and mpeg actually there are several formats in the files however the TV can only play some files in avi and mpeg formats Some files with the postfix dat are not movie files but data files commonly used in computers and they can not be played as movies Streaming Media Playing System Installation of Streaming Media System 1 MMC card 2 MS MS Pro card 3 SD card Interface Intestine Interface 7 A A o A MULTIMEDIA a CARD i 1 U Ald 128 S D 2 E 4 4 A F Notes 1 Time of insertion insert a card into corresponding interface 2s after starting the streaming media Do not start the streaming media system
34. ource menu In case of no other operation the signal source menu will automatically disappearupon reaching the OSD disappearance time preset inthe main menu 02 Searching Channel In this section how to use the remote control to set channel is explained You can also use buttons on the TV set to set channel Channel Edit 1 Press MENU on the remote control unit or MENU on the TV s front panel to display main menu and then eee press lt gt to select Channel menu Seer 2 Press A W to select the Channel Edit option and then press K to enter submenu IB Picture t Audio B Channel yiFunction 88 Adjust Timer Search Press A V to select the Manual Search option and finally press lt gt to start manual search RSI a Upon finding a program the search will automatically ee stop and the program will be stored onto the current Manual Search eon 874 26MH2 channel You may stop the search by pressing OK or Color System lt Auto Sound System lt DK gt MENU Skip lt ON Fine Tuning Press A VW to select the Fine Tune W Picture Audio Channel PFunction EB Adjust Timer option and then press lt gt to start UP or DOWN fine tuning until obtaining a relatively good picture effect The fine tuning function is for the purpose of improving picture effect through fine tuning when that of a certain program is not good enough Normally the optimal picture effec
35. pots or some anomalistic stripes or spots This is not defect Ifthe TV set is used in an area 2 400 meters above the sea level where the air pressure is below 750hpa the picture on the screen may be affected and a muffled sound might be produced These phenomena might happen in the area 1 500 meters above the sea level This is resulted from difference between air pressures inside and outside the display This is not a defect covered by the limited warranty i Specifications Basic specification and parameter Power 150 240V 50 60Hz Color System PAL NTSC SECAM Sound System DK BG I M Video input USB AV CVBS S VIDEO YPbPr YCbCr HDMlor DVI VGA Operating temperature range 5 35 C Operating humidity range 20 80 Storage Temperature 15 C 45 C Environmental Storage Humidity 5 90 non condensing condition If the storage temperature is lower than 0 C please first lays the machine aside after in the operating temperature environment carries on restores 2 hours then electrifies the use again protects your television not to receive the damage Owner s manual x1 i Remote Control x1 Accessories Alkaline battery x2 Product main size contain stand Power Consumption 26 R3 M9 60W 662x200x500mm 8 7Kg 796x230x590mm 11 8Kg Model Net Size L x WxH Net Weight 32 R3 M9 37 R3 100W 913x290x 664mm 17 0Kg EE 42 R3 M9 120W 1020x290x724mm 27 5Kg 46 R3 M9
36. rage from option and Auto Search then press lt gt to set the found from which to be ALCS Ga stored press A Y to select the Auto Search option press gt OK to enter the auto search menu afterwards press K to select the Confirm option and finally press OK to confirm the starting of auto search ml Picture s Audio E Channel y amp eFunction Adjust Timer 4 During auto search the scale value on the progress bar is continually increasing indicating the auto search is in progress After finishing the auto search the TV will play the channel starting the auto search To stop the search in halfway just press MENU OK and the TV will play the first searched channel ee Ee Auto Search S Do you want to start auto search Auto Search Found 2 Frequency 25MHz ml Picture s Audio RB Channel yeFunction f Adjust Timer Exchange 1 Press MENU on the remote control unit or MENU on the TV s front panel to display main menu and then _ 7 press lt gt to select Channel menu Exchange Current Channel lt To Channel lt 2 Press A W to select the Exchange option and then Exchange press K to enter its submenu 3 Press A Y to select the To Channel option and then aam eres eee press lt gt to set the found to be exchanged to 4 After adjusting the current channel and the found to be exchanged to press A
37. s as OFF the Preset Channel is set as OFF and max volume returns to 100 except password Streaming Media Playing System Note The diagrams in the following section are schematic and only for your reference Please see the actual product if necessary Installation of Streaming Media System 1 Supported file formats 1 Picture jpg bmp png files 2 Music Mp3 files 3 Movie MPEG4 avi files in accordance with Divx4 x 5 x Protocol MPEG2 some mpeg files MPEG1 dat and some mpeg files 4 Text Txt Note Due to the particularity of file coding some files may be unable to be read 2 Supported equipment Support the equipment that supports Mass Storage Protocol and whose file system is FAT FAT16 FAT32 such as some USB disks mobile hard disks card readers MP3 players and digital cameras If USB equipment could not be identified due to unsupported file system please format the equipment to the above mentioned file system 3 The external card reader supports most of the digital cards in the current market the types of digital cards that can be read are relevant to the performance of selected card reader you may attach standard mobile hard disks working voltage 5 0V working current not higher than 500mA during media playing do not pull out storage media otherwise it may cause system halt damage the files in storage media or damage USB equipment sometimes the TV may halt due to overhigh inf
38. set How to use the password function Press H LOCK the TV screen will display Enter Password to prompt the user to enter a correct password by pressing corresponding numerical keys if the password is correct the user enters the Lock Set menu if incorrect the user is required to enter a password again If there is no operation for a few seconds the display will automatically disappear The Lock Set menu is as follows Change Password Tuning Lock lt Off gt Preset Source lt Off gt Preset Prog lt Off gt Source Lock Child Lock lt Off gt Max Volume lt gt Power On Volume lt Off gt Unlock To set new password After entering the Lock Set menu press A Y to select the Change Password option and then press lt gt to display the Change Password menu afterwards enter a new 4 digit password by pressing numerical keys and repeat entering this password once and finally select the option to be confirmed and press MENU to confirm indicating the successful change of password If the user does not want to change the password in halfway he may press MENU to exit from this menu Note The initial password is 0000 and the password setting will not be changed after executing the Unlock option Tuning Lock Press A Y to select the Tuning Lock option and then press lt gt to set ON or OFF If set ON th Tuning Menu is not available in TV mode To make any operation related to the Tuning Menu it
39. t can be obtained without fine tuning when watching TV programs and fine tuning is to meet the need of adjusting a certain program Color system Press A Y to select the Color Systems option and then press lt gt to select correct color system The TV is designed with three systems for your choice i e Auto PAL SECAM and NTSC Generally the system is set as Auto and it is not necessary to make an adjustment The system is normally set as Auto during auto search Sound system The TV is designed with four systems for your choice i e DK M BG and I Generally it is not necessary to adjust the system The system is normally set as DK during auto search Skip When the skip is set ON the channel will be skipped when pressing P A or P V and only can be selected by pressing 0 9 numerical keys If you want to recover the skipped channel 1 Use Direct digit Choosing button to select the number of the channel to be recovered 2 Do the above steps again 3 Press to set Skip as Off 43 Searching Channel Automatic search 1 Press MENU on the remote control to display main l Channel Edit menu and then press lt gt to select Channel menu Auto Search Exchange Note Only when Tuning Lock in the H Lock menu is Off can the Channel menu be selected 2 Press A Y to select the Auto Search option and BERANA Ecran EOE then press OK to enter submenu 3 Press A Y to select the Sto
40. te the Unlock option in the Lock Set menu Child Lock Setting Press A Y to select the Child Lock option and then press lt gt to set ON or OFF If set ON this control key will not respond and the screen will display Child Lock when the key is pressed if no other operation is made the display will automatically disappear later To resume Child Lock function just enter the Lock Set menu to set Child Lock OFF or execute the Unlock option Max Volume Setting Press A F to select the Max Volume option and then press 417 P to freely adjust the max volume within the range of 0 100 After finishing the setting the max volume in the Volume menu will not exceed the preset max volume for example if the preset max volume is 30 the volume in the Volume menu can not be increased any longer upon reaching 30 if the preset max volume is less than the value in the Volume menu the latter will decrease along with the decrease of preset max volume Power on Volume Setting Press A W to select the Power on Volume option and then press lt gt to freely adjust the volume within the range of 0 100 After setting a certain value except OFF the TV plays a program with the preset volume upon turning on when set as OFF upon turning on the TV plays a program with the volume before turning off last time Unlock Setting Press A Y to select the Unlock option and then press K to clear all the lock settings namely set all the lock setting option
41. tion interface and then press A W to Movie SubTitle select the required options Photo Slide Time Set the scan speed of pictures to be scanned in slide form There are three options Slow Middle Fast Press lt 4 gt to select the desired option Movie SubTitle Set movie subtitle enable or disable Press lt gt to select the desired option lt Middle gt lt enable gt B Maintenance Early malfunctions can be prevented Careful and regular cleaning can extend the amount of time you will have your new TV Be sure to turn the power off and unplug the power cord before you begin any cleaning Cleaning the Screen 1 Here s a great way to keep the dust off your screen for a while Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent Wring the cloth until it s almost dry and then use it to wipe the screen 2 Make sure the excess water is off the screen and then let it air dry before you turn on your TV Cleaning the Cabinet To remove dirt or dust wipe the cabinet with a soft dry lint free cloth Please be sure not to use a wet cloth Extended Absence If you expect to leave your TV dormant for a long time such as a vacation its a good idea to unplug the power cord to protect against possible damage from lightning or power surges fl Troubleshooting For the sake oftime andcost itis strongly recommended that you check out the problem by yourse
42. trol sensor on the TV Function introduction 1 POWER Press thiskey to start TV from standby KE mode press itagain to returnto standby mode USB DSMB 2 USB Press thiskey for quick switching of streaming media 2 C L T 3 H LOCK Referto the Functional Description on Page 223 4 Press this keyto open close signalsource options menu Cc Cc Cc 5 DSMB Press this keyfor quick switching of MO Card B Eee SARS STILL Press this key to freezethe image Pressit again D T a C Cy to return Lo normal screen Note Do not display a still ee ee ae a e picture for along time to prevent the screenfrom burns 2 abc def 7 ARC Press this key to select the screen display proportion C1 2 3 8 MUTE Press thiskey to mutethe sound pressit again to S e activate the sound The sound maybe activated byturning Lp J M the TV onagain or increasingthe volume 9 9 0 9 These keysare used toselect a channel pars G WXxyz 10 Q VIEW Pressthis key toreturn to theprevious TV program only work inthe TV mode 11 VOL Used to adjustthe volume whenthe screen ee ae oe LI G E menu is closed C0 C D 12 CH Used toselect a TV channel when the screen 8 options menu isclosed specifically press PA to Cee decrease the channeland press P to increase the channel 13 Sound Mode Pressthis key continuously to select the S iar AL GEE ti lyto select th Picture Mode Pressthis
Download Pdf Manuals
Related Search