Haier HWM88-0566T User's Manual
Contents
1. Open and close the top lid once No or slow water filling not reaching the level in 40 min the digitron displays E4 buzzing The water tap is not open The water inlet valve is blocked The water pressureis too low and the current is too small Open the water tap Push the Start Pause button Clean the water inlet valve Push the Start Pause button Wait for the normal water pressure Before use The digitron displays E6 The water level sensor is bad Please contact the after sales service department Poor or no waterfall flow If the nozzle is choked with foreign bodies Remove the foreign bodies Do not put the machine at damp place like the bathroom Never wash it with water Do not put wet laundries on the control panel Do not wash water proof laundries like the raincoat bike covers etc to avoid abnormal vibrations in spinning Do not let the machine share one receptacle with other electric appliances If the plugging into the receptacle is loose do not use the plug any more e The spinning is intermittent when it starts Is there power failure Use it when the power is on Is the power plug loose insert the power plug tightly Notwash Does the water level arrive at th i The machine does oes the wa er evel arrive atthe Affusion to the set water level not act set water level Is the power plug loose Insert the2. button E E B With it you can select one or a a several processes of soak a a wash rinse and spin a E A Water level button Reserve button During the standard program the washing machine The digitron displays remain time can detect the laundries automatically After detection it will set the water level to suitable value before washing is finished in minutes among 1 2 3 and 4 automatically Push reserve button the digitron e You can also set water level by yourself After the displays the reserve time of washing machine is started it will not set water level automatically You shall push the start pause in hours The indicator flashes to button to make new setting indicate that the reserve function is elf save program is selected it will display water operating level 2 When water level 1 is reached in water e Push reserve button to display filling it will perform washing while filling water When water level 2 is reached it will change to the reserve mode normal washing 10 Connection between the water inlet hose and the washer 1 Do not take off the water absorption cushion Please check if the cushion is dropped or damaged before each usage If it happens inlet hose g please contact our after sale department immediately N nut ofthe water 2 Put the nut of the water inlet hose on the valve jointer 3 Fasten the nut Swing it gently to confirm if it s suitable joint
3. idle or cleaning the machine Do not plug or pull the power plug with wet hand Do not bend extend twist bind by force Do not press or nip it with weight Keep the pin of the power plug clean if the power plug is polluted with dust please wipe with dry cloth carefully If the power cord or the power plug is bad to avoid risk it is required to have it replaced by the technicians of our special shop or our customer care agent In case the washing machine is installed on ground with carpet do not block the ventilation hole with carpet The ventilation oles at the bottom Soft object Do not use water hotter than 50 C Phenomena The reason How to settle Buzzing upon reservation starts the digitron displays E0 The top lid is not closed Close the top lid No or slow drain the digitron displays E1 buzzing Is the drain hose put down Is the drain hose blocked by foreign material Put down the drain hose Open and close the top lid once Clean the foreign material Open and close the top lid once Running pauses during spin i on displays REP The top cover leaves open Close the top lid Safety switch actuates not spin after self correction twice the digitron displays E3 buzzing Are the laundries put slantingly Isthe machine slanting Re order the laundries Close the top lid Level the machine in right position
4. other side Fix the drain hose with drain hose frame onto the cabinet as indicated in Figure 5 down the drain bushing as indicated in Figure 2 3 Drain outlet protecting cover Figure 4 Drain bushing Figure 2 Cabinet ae Inner Outer Pusl Drain bushing 4 Drain hose fixing Take down clamp Drain bushing Figure 1 5 Install the drain outlet protecting cover to the o her side as indicated in Figure 6 Figure 6 T g Push Figure 3 Remarks in order to make sure of the correct of installation it is suggested to change the direction of the drain hose with our company serviceman Usage the drain hose The drainage shall be smooth with the drain hose 1 The height of the drain hose shall be less than 10cm 4 lf extra drain hose is needed please make separate or the drainage will not be smooth and cost such long purchase The inner diameter of the extra hose shall time that the machine may stop at mid way not less than 30mm and the length shall not exceed 2 Do not step on or press the drain hose 1 5m 3 If the drain hose is too long cut it at mid point To make smooth drainage cut the front end of the hose slantingly 5 If the extra hose is too long cut it either at Aor at B Install the water inlet hose Confirm the water faucet Start pause button Power button Push the power button to switch on the power Under power on mode push it to switch off
5. power plug tightly Not spin Is the top lid closed Close the top lid Are the laundries put orderly Put the laundries orderly There s abnormal sound inside the s the machine slanting Level the machine properly machine Are the laundries slanting in Re order the laundries spinning Is the jointer screw of the water PE The water faucet leaks inlet hose is loose or twisted Fasten the jointer screw awry properly Common phenomena Phenomena Explanation Balance the laundries to avoid slanting The wash procedure pauses The cloth sensor is detecting it will add water after about 48 senconds The program is setting the drain time certain MS te o 2 15 Select spin program but it does not work period is needed before it starts spinning It is the water remained performance inspection by the factory There may be some water flowing out of the drain hose in the first use of the machine 14 Disposal after washing e After using please clean the lint and foreign materials of the lint filter etc in time Otherwise it may influence your using the machine e Please first pull off the power plug from the receptacle before cleaning Clean the detergent box and set it on the control panel seat 1 The method of dismantle Push it up aslant and gently 2 The method of install install it upwards and aslant and push it in h4 v Dismantle Install The lin
6. the power After the power is switched on press it to start the machine e During working push it to pause Water faucet suitable Water faucet not suitable Outlet end surface gt 10mm Push the power button to switch on the power If the start pause button is not pushed the machine will switch off the power automatically after 5 minutes e During pause push this button to restart and goon working a Benes eeee m S Itis required that the front end shall be longer than 10mm FUZZY a C The exit end face of the faucet shall be flat and smooth If not please file it to avoid leakage Sere STANDARD COTTON a i O se m m Connection between the water inlet hose jointer and the water faucet BLANKET z a SAVE Ses 1 Press the lower end of the lock lever and push down the slider Take off the water inlet hose jointer from the SILK Koet water inlet hose component See to Figure 1 gt Q 2 Loosen the screw till the water faucet can be accessed Put the jointer of the water inlet hose on the faucet s8 See to Figure 2 If the faucet is too large and the jointer can not be set on the water faucet please loosen e pus the four screws and take out the bushing in the jointer The front end of the faucet must be smooth AM AIR DRY w otherwise it may leak water See to Figure 3 PROGR water inlet hose jointer O a Slider eee eee ee eee 7 a Q L Screw knife A q T Bushing a E a E al water inlet hose a Figur
7. Fully Automatic Washing Machine User s manual This manual is for HWM88 0566T Special number 0030507833B Please read this manual carefully before using Retain it for future reference CONTENTS a gt Specification table the 2nd cover e Safety precautions eee see sos seo wee ooe soo cos soo coo 2 Installation and adjustment eee see cee cee cee wee wee coe A Install the water inlet hose sr st sr 6 Preparation before washings ee rr err eee 8 Put in the laundries cre sss sse sse sese sse eee Q Usage of the detergent e ee ee eet eet tet eee ee ee 9 oO Use the operation DUTTONS sor rrr eee ee eee cette eee eeees 10 Disposal after washings se srr ee eee tee eee ee 14 Trouble shooting answer to question 15 SN A Specification table Water level Water quantity about 1 20L 2 40L 3 56L 4 72L Water Injection pressure 0 03MPa 1MPa Standard Rated washing spinning capacity 8 0kg 8 0kg 16 Packing list Name Storage position User s manual Inside the document bag Warranty card Inside the document bag Components of the water inlet Inside the accessory bag Tapping screws Eight U Inside the accessory bag Bottom Between the upper cushion of the washing machine package and the upper seal of the package carton Automatic was
8. anual It is very important to your security and correct operating the machine Install the bottom plate After you open the package please lean the washing machine gently downon soft items like the towel cloth blanket etc Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver then lift the machine up gently See to the figure Soft items Bottom plate Screw Adjust the Installation position The largest allowable slope of the shank base of the machine is 2 The slanting or rough ground will result in unstable running or stoppage of the machine Please adjust it with following methods Confirm it s horizontal Hang the lead line to check if it is horizontal Adjust the adjustable leg 1 To twist the adjustable leg please first lift up the side of the leg slightly loosen the adjustable nut the adjustable nut and twist the leg a the adjustable leg 2 After adjustment fasten the nut 4 Push the water level button select suitable water level WATER After switching on the power the washing machine will execute fuzzy program automatically to detect the cloth After defection it can set the water level automatically To select other water level first push the start pause button then push the water level button to set the water level 5 Push the reserve button to select suitable reserve wash program ene prog C3 l After switching
9. d washing powder into the box directly under fuzzy program and reserve program Dissolve directly inside the washing machine not applicable for fuzzy and reserve program 1 Add some water select the 1 water level 2 Add washing powder Run for about 30s to fully dissolve the Powder Then push the start pause button 3 Put in laundries Select suitable water level Push the start pause button again Quick dissolving of washing powder 1 Prepare warm water of 30 C and container 2 Add washing powder while stirring to dissolve it completely Please add suitable washing powder as per the laundries quantity the set water level and water quantity If you select save program it is suggested to use liquid detergent instead of washing powder to guarantee the washing effect It is not recommended to use rich foam washing powder Washing powder with poor quality or long time storage may get caked Please clean the detergent box duly in usage a you open the top lid the machine will stop working and alarm in spinning cess
10. e 1 j i i igure Figure 2 Figure 3 Program button AIR DRY button 3 Fasten the four screws evenly See to Figure 4 a Push the AIR DRY button then the AIR DRY 4 Take off the nameplate Twist the fastening nut as per the indication of the figure Following Kianto program 1 avallabie indicator igat iS on that means he ARDRY program is chosen The purpose is drying the inner tub andthe outer tub which can avoid Standard Common washing ee mildew onthe outer tuband the inner ub to seal up the exit end face of the faucet See to Figure 5 Program Application remark Before installation the threading is 4mmabove the upper surface of the nut After installation the threading is 2mm above the upper surface of the nut See to figure 6 Blanket Washing for coverlet bigger heavy thickness laundries About 4mm before twisting Washing for the normal laundries About less than 2mm after twisting Sae 3 in short time Silk Washing for silk textiles Cotton Washing for cotton textiles Figure 4 Figure 5 Figure 6 5 Use the operation buttons a Description of operation button Indicator mode and meaning Off Flashing indicate the running program On indicate the program about to run or indicate the selected mode 4 SOAK TIME REMAINED MINUTES 3 3 WASH a RINSE SPIN RESERVE HOURS LATER War ER LEV as RESERVE a a m z m a m a m E a m a z m m Process
11. er of the water absorption water inlet valve cushion the jointer of the 1 Push down the slider Insert the water inlet hose into the jointer aa water inlet hose 2 Hang the lock lever to the jointer Release the slider till a click sound is heard Check the connection between the jointer of the water inlet hose and the water faucet 1 Swing the hose gently to confirm if it is fastened stable 2 After installation open the faucet to check if it leaks 3 Do not bend the hose with overstrain 4 Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet and the installation of the water inlet hose are firm so as to prevent dropping from improper installation position Dismantle the water inlet hose 1 Close the water faucet 2 Press the locking lever Push down the slider Then pull of the water inlet hose If the machine is used frequently the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw 1 Preparation before washing Preparation before washing 1 Connect the water inlet hose 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle Do not connect the earth terminal to the gas pipe and tap water pipe 3 Put down the drain hose 4 Slanting or uneven ground may result in unstable working or abnormal noise Please make the machine stand horizontally Pay a
12. hing machine Names of the parts Top lid componen Control panne i Ji Detergent box Front control board Cabinet Water inlet valve Water absorption cushion Power cord _ Handle oO Back cover Drain hose Adjustable leg film Adjustable leg Drain hose frame Fixed leg 3 pieces Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents Forbidden sign Contents marked with that symbol are actions forbidden to perform Performing of those action may result in damage of the machine or influence the personal safety of the users Safety precautions Trouble shooting answer to question If there s breakdown please pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair Do not repair it by yourself Please plug the power plug on special receptacle Be sure to use three pins power receptacle Ensure that the earthing prong of the power receptacle is earthed reliably Use leakage protector if possible The washing machine must be positioned so that the plug is accessible Be sure to pull the plug off and close the water faucet in following cases power failure delivering the machine setting the machine
13. on the power the reserve program is set to off mode automatically If you need to set the washing procedure to be finished at reserved time please push the reserve button to set the reserve wash program Refer to reserve button in Page 10 for selection Cini open tee pogan EZ e When the reserve function is activated the indicator light of the program you have set will be off The reserve hour and time remain indicator lights will be on During reserve procedure push the reserve button to display the reserve mode e To change the running program or cancel the reserve setting you EE need to switch off the power and make new selection Geminaa Ea AA shaa ater hours 6 Push the Air dry button a E Attention e After switiching on the power the function of the Air dry and reserve is not selected at the same time e Only after the program with the spin is set Air dry program can be selected selecting the other program without spinning Air dry program can not be selected that is the button of Air dry is no reaction 7 Push the Start Pause button 1 6 Finish washing After finishing wash it ll alarm automatically 13 12 b Steps of using the operation buttons and description of the steps we ahoeDpanTes E SOAK e STANDARD ci gg 2 nesenas ATEN mr Bx fr Process RAM nip ORY 1 Push power button to switch on the power T 2 Pu
14. one washing cycle shall be lower than the rated The thickness size type of the cloth will influence the actual washing capacity Itis suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing 3 Usage of detergent Control panel seat How to use softener See to the manual of softener for the usage and dosage When adding softener into the softener inlet of washing powder box note that it shall not exceed the lower side of the cap Do not leave the softener for long period after adding it into the box Otherwise it may be solidified and block the inlet As the softener is easy to solidify please clean the box frequently You shall clean iteach time you use reserve function Before use softener you must select to sterilize function How to use whitener Add water to stipulated level Dilute the whitener with container and then pour it into the liquid whitener inlet slowly Laundries with color or pattern is not colorfast thus not applicable The whitener shall not touch laundries directly See to the manual of whitener for the usage and dosage For whitener in powder dissolve it before use inlet 4 Close the top lid Liquid detergent Add washing powder and softener into the box directly as per indicated in left figure After adding close the box How to use washing powder It is suggested to ad
15. sh program button to select suitable PROGRAM full auto program O PEL After the power is switched on standard is automatically set To select other full auto program please push the program button till the corresponding indicator is on Refer to the Program button on Page 11 E g Set to SAVE program for small quantity of laundries with light soil E 3 Push Process button to select suitable procedure program PROCESS M ET __Attention fa Even there s no water in the tub a certain period is required before spin starting e Separate the laundries that are not colorfast from other laundries in washing The soak procedure can work in cooperation with automatic programs like standard blanket cotton There is intermittent pulsator stirring during soak After the machine starts operation you can only set the program and procedure during washing and can not make setting in other cases How to change the direction of the drain hose 1 Dismantle the rear cover of the washing machine 3 Dismantle the drain outlet protecting cover at the other side j the way is the same as the drain bushing then install the drain 2 Put down the drain hose gt Take off the drain hose bushing as indicated in Figure 4 frame as indicated in Figure 1 Take the drain hose into the cabinet then nip the drain fixing clamp to make it f 7 deviated from the clip the other hand is used to put 4 Extend the drain hose from the
16. t filter must be used during washing It must be cleaned in time after each using Lint filter 1 Push down the spring piece of the top lint filter to make the claws out of the filter cover and then pull out the lint filter to get it down figure1 2 Pull the back of the lint filter and then you can get down it off the front cover of the lint filter Cfigure2 3 Sweep the rubbish in the lint filter 4 Put the back of the lint filter into the front cover 5 Put the lint filter into filter cover and make it tight 6 Make sure the lint filter well installed or it can influence your use The back cover of lint filter Dismantle Install C oina l The front cover of lint filter Figure 2 Figure 1 Safety precautions Do not put hand into the rotating tub It is dangerous even if the rotation speed is slow Take special care of the children Keep children away from the washing machine to avoid them climbing on Do not decompose repair or alter the machine by yourself Do not put any hot or heavy items such as the kettle with hot water on the washing machine Do not wash laundries with volatile materials such as thinner petrol etc The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet Please clean it with brush every two months If the cabinet is dirty wipe it with wet cloth Do not flush it directl
17. ttention to followings before washing the laundries Confirm if there s special requirement for the laundries Clear the pocket Take out the coins sand hairpins etc Fasten the buttons and zippers The quantity of the laundries shall not exceed the rated value The big laundries like the jeans shall be put in loosely 2 When the pulsator is running the buttons of the laundries may cause noise For the sake of discretion please put the laundries with buttons into other laundries a Check if the laundries are applicable for washing with machine b Divide the laundries that are not colorfast from other laundries c Put those laundries difficult to absorb water into water with hand d For those laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent in advance which can make it easier to remove the soil e For those laundries that may get lint ball and those with long fur turn it over before putting in f Do not put those laundries polluted by chemicals directly into the washing machine For those small laundries and those may get twisting or worn and woolen fur laundries please put them into mesh bag for washing 2 Put in the laundries The capacity of washing of the machine refer to the largest weight of the capacity standard laundries under dry condition that can be washed in one time Laundries quantity in
18. y with water Wipe it with neutral detergent Do not wipe it with thinner petrol alcohol etc A x q 1 After washing close the water faucet If needed you can dismantle the water inlet hose 2 Do not store water in the washing machine for a long period Drain the water completely after each using 3 Be sure to pull off the power plug before maintenance 4 Hang up the power cord and drain hose 5 Wipe off the water drops on the surface of the machine and inside the tub Open the top lid for some time about 1 hour then close the top lid The handicapped or children without care shall not use the machine Keep the machine away from direct sunlight and heat source like the heater Please keep the lint filter in good condition and install it to proper position during washing If the lint filter is lost or damaged please contact the local customer care agent The cover oflint filter lint fitter lt L lint filter To protect your laundries and washing machine please take out all of the coins buttons sand hairpin and other foreign materials before washing ZR So t S Dismantle Instali Dismantle N The back cover of lintfilter Please check if the water faucet is open and if the connection of the water inlet pipe is proper tis suggested to use foamless washing powder Installation and adjustment Please install and adjust the machine according to the requirement of the m
Download Pdf Manuals
Related Search