Haier HWM70-10 User's Manual
Contents
1. x washing machine Name Quantity User s manual One piece Inside the document bag Guarantee One piece Inside the document bag Components of the water inlet hose One piece Inside the accessory bag e Lint filter Fy One piece Inside the document bag Bottom plate IP Between the upper cushion of the One piece washing machine package and the upper seal of the package carton Tapping screws z Eight piece inside the document bag A g e Full automatic One set A 17 00308071672. Do not damage the power cord bend extend twist bind or alter it by force Do not press or nip it with weight If the power cord or the power plug is bad or the power plug becomes flexible to avoid risk it is required to have it replaced by the technicians of our special shop or the after sale service department Keep the pin of the power plug clean if the power plug is polluted with dust please A Do not put the machine at damp place like the bathroom Never wash it with water Not put wet laundries on the control panel Do not use water hotter above 50 C In case the washing machine is installed on ground with carpet do not block the ventilation hole with carpet The ventilation holes at the bottom Q HH O soft items Do not wash water proof laundries like the raincoat bike covers etc to avoid abnormal vibrations in spinning the plugging into the receptacle is loose do not use the plug any more K Do not let the machine share one receptacle with other electric appliances If the power plug is damaged or E Safety precautions Do not stretch hands into the working machine It is dangerous even if the rotation is slow Take special care of the children Do not let the children climb the washing machine Do not decompose repair or alter the machine by yourself Do not put any hot or heavy items such as the kettle with hot water on the washing machine
3. Do not wash laundries with volatile materials such as thinner petrol etc The handicapped or children without care shall not use the machine Keep the machine away from direct sunlight and heat source like the heater To prevent the lint inside the tub from blocking the cascade outlet during washing please keep the lint filter in good condition and install it to proper position If the lint filter is lost or damaged please contact the local after sales service department of our company PA ES Install Dismantle To protect yourlaundries and wash ing machine please take out allof the coins buttons sand hairpin and other foreign materials before washing Q AO Please check if the water faucet is open and ifthe connection of the water inlet pipe is proper It is suggested to use foamless washing powder Installation and adjustment Please install and adjust the machine according to the requirement of the manual It is very important to your security and correct operating the machine Install the lint filter Install the bottom plate Push the lint filter downward to location for lint filter LEE Xe A After you open the package please lean 4 the washing machine gently down on soft items like the towel cloth blanket etc Install the bottom plate to the bottom of the machine with the eight screws by across screwdriver then lift
4. PROGRAM SELECTION PROCEDURE SELECTION x T m C PROGRAM SELECTION button umn nnmnnn 1 You can select from the following four programs STANDARD Normal wash JEANS Large thick or heavily soiled laundry GENTLE Woolen textiles or underwear QUICK WASH 10 min quick wash for load below 2kg e With it you can select one OF several processes of soak wash rinse and spin PROCEDURE SELECTION button 10 START PAUSE button After the power is switched on press it to start the machine POWER ON OFF button Press POWER ON OFF button to connect power supply During working push it to pause During pause push this button to restart After power is connected pressing this and go on working button will cut off the supply Numeral tube To indicate during sensing To indicate remaining min During program running To indicate remaining reserved time hrs during reservation period To indicate fault symbols for abnormal e Pa conditions see page 16 SURPLUS MIN 44LV1 SYNOH 3AYSSIY gt pee 2 RESERVATION Dutton a e Push the button to select the reserve Child safety lock program Start up Push the RESERVATION and SPIN and POWER ON OFF buttons at the same time After 2 beep sounds can set the other program After all the program set is finished push the START PAUSE button push and hold RESERVATION
5. waterinlet valve Open and close the top lid once The machine does not act The indicators are off ls there power failure Is the power plug loose Use it when the power is on Insert the power plug tightly There s abnormal sound inside the machine Is the machine slanting Are the laundries slanting in spinning Is there metal material inside the washing mach ine Level the machine properly Re order the laundries close the top lid Fasten the buttons and zipper The water faucet leaks Is the jointer screw of the water inlet hose is loose or twisted awry Fasten the jointer screw properly Common phenomena Phenomena The spinning is intermittent whenit starts Explanation It is tobalance the laundries to avoid slanting e Pause during washing Supplemental water filled after fabric sensor has checked fabric about48 seconds Push the SPIN button but itdoesn t act The program issetting the draintime Acertain period is needed before it starts spinning The pulsator pauses during water filling in washing and rinsing e Itis toavoid splashing during water filling There may be some water flowing out of the drain hose in the first use of the machine It is the water remained inthe machine during the ex factory performance inspection Packing list a Storage position N
6. Full Automatic Washing Machine i With Pump User s manual This manual is for HWM70 10 Please read this manual carefully before using Retain it for future reference Contents SP SCIONS oe ceiien aeaa the 2na cover Names of the ANS cap taiaxicodhsceactcntesanctSacdastoauslsinddeadatoslatnaledndcasnelnneictanevstastteares 1 Safety precautions sssssssssiierrssssssrtttrrrrsseeerttrrrnsnsteeettrnrrnsnnnenttntnnrnnennntnennnaaa 2 Installation and adjustment sccassssessvctiseeseneisinensscessentdsesstanismntseccstaneeestienntanies 4 Preparation before washing ssssssseieisssssssssterrrrrssssenrrrrrrsssnnnntrnrnrinsnnnnernrnnnsan 8 PU IM Wie TUNG NES eresie dsencsteraue atin asmtelaienea se 9 Usage of the detergent sc sche acai tnatensesiesiiachsaptin a cateecdaedvacecoasttunnncaiceettaactetatenet 9 Use the operation buttons sssssssssssssssssreterirrrririrrrrrrrrrrrrrsrssnsnnnnnnnnnnnnnnrrrrrree 10 Close the top lA easiest aria AE E eee 14 Finish MAS MNS asendisse end lateness ictenetvet 14 Disposal after washing crt ciee keri cmnectadeniieuertuneiaieded deadeenaad 15 Trouble shooting e Answer to question 16 Packing ky panii ne mcrae rr cee eer mcrae revere are terre 17 Specifications Water level Water 1 18L 2 21L 3 27L 4 32L 5 35L quantity about 6 38L 7 41L 8 44L 9 47L 10 51L Water inlet pressure 0 03MPa 0 78MPa Rated washing spinning capacity 7 0kg Nam
7. and SPIN buttons for more than 2 seconds at the same washing time from 2 to 24 hours Pressing the button the numeral tube displays the reserved hours to the wash cycle end The point light flashes to indicate in reservation time After a beep sound the child safety lock program works all buttons are locked and cannot be selected Release push and hold RESERVATION and SPIN buttons for more than 2 seconds at the same time After a beep sound the child safety lock program is released Remarks After pressing POWER ON OFF to connect power supply if the washing machine lasts idle more than 10 min it would automatically shut off the supply 11 B Operating procedure and explanations for the buttons STANDARD 5 E s SOAK n SURPLUSIMIN eans aa 3 i wasu 1 ae GENTLE rise auick wash ray F SPIN amp POWER 1 Push the POWER ON OFF button to switch on the power ae 2 Push the PROGRAM SELECTION button to select the suitable automatic program After switching on the power the machine will set to STANDARD program automatically To select other program push the PROGRAM SELECTION button till the corresponding indicator is on Refer to the PROGRAM SELECTION button in Page 10 For example select QUICK WASH for the quick washing of the laundries with light dirt In selecting the STANDARD or JEANS programs the machine will execute fuzzy program to control the comple
8. es of the parts Notice label Water valve Water absorption Top lid B cushion Lint filter Installed by user Control panel Power line Filter cover r hss F a OAT Inner tub NAN T for the d we Adjustable foot Cabinet stick Back cover Base frame Adjustable foot Fixed foot 3 Meaning and description of the symbols Warning sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents otherwise it may cause damage of the machine or injure the personal safety of the user Forbidden sign Contents marked with that symbol are actions forbidden to perform Performing of those actions may result in damage of the machine or injure the personal safety ofthe user a Safety precautions Please plug the plug on special receptacle with rated voltage Be sure to use single phase three pins receptacle Ensure the earthing prong of the power receptacle is earthed reliably Use leakage protector if possible The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally Be sure to pull the plug out and close the water tap when the machine is idle when moving the machine or when cleaning the machine Do not use wet hand to ins ert or pull out the power plug wipe with dry cloth carefully i
9. ice departmentof our company Do notrepair it by yourself Phenomena The reason How to settle After the reservation is started it rings and the digital tub display E0 The top lidis not closed Close the top lid The draining does not work or the speed of draining is too slow The digital tub displays E1 andit rings is the drain hose blocked by foreign material is the drain hose frozen After long running of pump inthe hot weather power will be cut au tomatically for safe Clean the foreign material Open and close the top lid once Clean the frozen material Open and close the top lid once Some minutes later the machine will continue to work Running pauses during spin The digital tube displays E2 and it rings The top lidis not closed Close the top lid Safety switch acts The spin ning cannot work after twice revising The digital tube dis plays E3 and itrings Are the laundries put slantingly Is the machine slanting Re order the laundries Close the top lid Level the machine in right position Open and close the top lidonce It does not water inlet or the speed is slow the water level is not reached after 15 minutes The digital tube displays E4 and itrings The water faucet open or is there water supply failure The water inlet valve is blocked Open the waterfaucet Open and close the top lid once Clean the
10. id using whitener on laundries with color or pattern as they are prone to lose color The whitener shall not touch the laundries directly Refer to the user s manual for the usage and quantity of the whitener For powder whitener please dissolve it before use suitable water level The instant dissolving of the washing powder 1 Prepare warm water of 30 Cand a container 2 Add the powderwhile stirring to fully dissolve it Put in the proper quantities detergent according to the water level andthe laundries quantities It is suggested not to usehigh sudsing detergent Washing powderwith poor quality or long time storage maybe caked Please pay attention to cleaningthe detergent box intime Use the operation buttons A Description of the function of the buttons Mode and meaning of indicator light O Flashing indicate the running program O On indicate the program about to run or indicate the selected mode WATER LEVEL SELECTION button The use selects a suitable water level depending on the load elf QUICK WASH is selected water level will indicate 2 After water level reaches 2 it will wash while water filling and wash normall upon the water level reaching 4 After washing for q min pressing WATER LEVEL button will enable supplemental water filling which will stop automatically upon the water reaching overflow level WATER LEVEL SELECTION
11. ine Please first pull off the power plug from the receptacle before cleaning Please rotates detergent box to control panel after clean it Rea ee The lint filter must be used during washing It must be cleaned in time after each using Lint filter 1 Pull it up to dismantle 2 Push it down to install 3 Clean the filter screen after washing Dismantle The filter screen of the water inlet valve is likely to be blocked by foreign materials andinfluence the water inlet Please clean it If the cabinet is dirty wipe itwith wet clot e Do not flush it directly with water e Wipe it with neutral detergent Do not wipe it with thinner petrol alcohol etc 1 After washing close the water faucet If needed you can dismantle the water inlet hose 2 Do not store water in the washing machine for a long period Drain the water completely after each using 3 Be sure to pull off the power plug before maintenance 4 Hang up the power cord and drain hose 5 Wipe off the water drops on the surface of the machine and inside the tub Open the top lid for some time about 1 hour then close the top lid 15 Trouble shooting Answer to question If there s breakdown please pull offthe power plug before checking Thefollowing phenomena arenot breakdowns sometimes Please confirmagain before sendingit to repair If thereare real breakdowns please come tothe special maintenance department orafter sale serv
12. likely to get lint ball or with long fiber please first turn the inside out before putting them into the water f Do not put the laundries polluted with chemicals directly into the washing machine g For those small laundries laundries likely to be twisted or worn and woolen laundries please put them into mesh bag before washing Put in the laundries e The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned inone time One time washing quantity shall be lower than the rated capacity The thickness size type of the cloth will inf luence the actual washing capacity It is sui table for one time washing to put in reasona ble amount of laundries and the laundries ca be turned round in washing e Do not select 4 water level for laundries less than 1 0kg so as to avoid splashing of water Towash thin laundries like the stocking silk etc please first put them into washing mesh bag which can be purchased separately before wash Usage of the detergent How to use the washing powder a e Direct dissolved inthe machine 1 Fill water to Low water level 2 Add the power Run for30 seconds to dissolve itcompletely 3 Put in thelaundries Select Inlet box of the detergent How touse the whitener Fill water to decided level Dilute the whitener with container Pour it slowly into the washing tub Avo
13. manual washing O O O me _ When the laundries need only Soak Wash Rinse Spin 4 Spin spin after drain pinning after manual washing first drain the spin O _ If the laundriesare very dirty i i 5 Soak wash rinse spin or the sleeve and collar are Soak Wash Rinse Spin dirty first soakthen wash O O O O if you pushthe PROCEDURE SELECTION button for 6times it willresume the original mode andit will circulate like that The soak programcan be usedas fitting ofthe STANDARD amp JEANS automatic programs Soak with slightstirring before wash 4 Push the WATER LEVEL button to select suitable water level GET WATER LEVEL SELECTION When the power is switched on the washing machine will check the cloth automatically After that the water level is set automatically To select other water level push the button Refer to the Standard usage quantity of the detergent and water quantity in Page 9 and WATER LEVEL SELECTION in Page 10 for the selection Time list of Each Program minutes Water Wash Spin Program level minute Rinse minute minute Total time minute Standard 1 10 About 1345 Rinse twice each about 2 About 6 About 35 47 Jeans 1 10 About 13 15 Rinse twice each about 2 About 6 About 35 47 Gentle 1 10 About 3 Rinse twice each about 2 About 2 About 24 Quick wash About 4 About 3 Rinse once about 2 About 2 About 10 x Total time i
14. ncluding the normal water inlet time and drain time Spin time the time from intermittent running to finishing The STANDARD and JEANS automatic programs can be fitted with soaking After water inlet first soak for 15 45 minutes then do wash The total washing time may be influenced by the water inlet pressure and water level When selecting QUICK WASH program wash rinse and spin are set automatically 5 Push the RESERVATION button E to select suitable reserve program RESERVATION After switching on the washing machinereserved wash program will be automatically set inactive If you desire a wash cycle to endat a reservedtime you can press the RESERVATION button over 2seconds to seta reserved wash program Refer to The button of RESERVATION on page 11 e Confirm the reserve program Page 11 La e When Reservation becomes active thenixie tube displays the time to the endof the reservedwash cycle and the indicator turnson a e Tochange the running program or cancelthe reservation you should cutoff the supplyand reselect 6 Press the START PAUSE button Cy START PAUSE SAMASSY ill finish 42LV1 SUNOH SURPLUS MIN Finish washing he washing machinecuts off the power supply automatically when washcycle ends Disposal after washing After using please clean the lint and foreign materials of the lint filter etc in time Otherwise it may influence your using the mach
15. off the water inlethose If the machine is used more than onceevery week thejointer of the water inlet hose canbe kept onthe tap to prevent damaging the fixing screw Preparation before washing Preparation before washing 1 Connect the water inlet hose and open the water tap 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle Do not connect the earth terminal to the gas pipe and tap water pipe 3 Hang up the drain hose N Pay attention to followings before washing the laundries Confirm if there s special requirment for the laundries Clear the pocket Take out the coins sand hairpins etc Q 7O Fasten the buttons and zippers The quantity of the laundries shall not exceed the rated value The big laundries like the jeans shall be put in loosely When the pulsator is running the buttons of the laundries may cause noise For the sake of discretion please put the laundries with buttons into other laundries RN D a Please check if the laundries are applicable for washing b Separate those not colorfast from other laundries c For laundries not water absorbing please put them into water with hands d For laundries with much soil please remove the soil first You can add detergent on the part with serious soil directly It is much easier to remove the soil by that mean e For laundries
16. or avoiding to siphon phenomenon during drain 2 Do not tramp or press the drain hose Install the water inlet hose s Confirm the water tap Water tap suitable Water tap not suitable Outlet end surface It is requiredthat the frontend shall belonger than 10mm The outlet end surface of thetap shall beflat and smooth If not please file it to pee leakage E Connection between the water inlet hose jointer and the water tap 1 Use the new water inlet hose provided with the machine to connect to the water faucet Old hose sets should not be reused 2 Press the lower end of the lock lever and push down the slider Take off the water inlet hose jointer from the water inlet hose component See to Figure 1 3 Loosen the screw till the water tap can be accessed Put the jointer of the water inlet hose on the tap See to Figure 2 If the tap diameter is too large and the jointer can not be set on the water tap please loosen the four screws and take out the bushing in the jointer See to the figure3 Water inlet pipe jointer Slider Screwdrive Bushing inos Water inlet pipe Figure 1 Figure 2 Figure 3 4 Fasten the four screws evenly See to Figure 4 5 Take off the nameplate Twist the fastening nut as per the indication of the figure See to Figure 5 Remarks Before twisting the fastening nut the thread is4mm above the upper surface ofthe nut After twisting the fastening nut theth
17. read is 2mm above the uppersurface of thenut See toFigure 6 About 4mm before twisting About below 2mm after twisting Figure 6 E Connection between the water inlet hose and the washing machine 1 Do not takeoff the water absorption Nut of the water inlet hose cushion Please checkif the cushion is dropped ordamaged before each Z usage If ithappens please contact our after sale departmentimmediately 2 Put the nutof the waterinlet hose on the valve jointer 3 Fasten the nut Swaying it gently to Water absorption cushion confirm if it s suitable Jointer of the water inlet valve Connection between the jointer of the water inlet hose and the water inlet hose 1 Push down theslider Insertthe D water inlet hoseinto the jointer TT Jointer of the water 2 Hang the locklever to thejointer inlet hose Release the slidertill a click pecking lever Slider sound is heard Check the connection between the jointer of the water inlet hose and the water tap 1 Swaying the hose gently to confirmif it isfastened stable 2 After installation openthe tap tocheck if itleaks 3 Do not bendthe hose with overstrain 4 Before each usage please check if the connection betweenthe jointer of the waterinlet hose andthe water tap and theinstallation of the water inlet hoseare firm soas to prevent dropping fromimproper Installation position 1 Close the watertap 2 Press the lockinglever Push down the slider Then pull
18. te procedure automa tically according to the cloth weight and water temperature to select water level current and washing time 3 Push the PROCESS SELECTION button to select ET PROCEDURE SELECTION suitable programs After switching on the power the machine will set to wash rinse spin program automatically That is the most common program To select program push the PROGRAM SELECTION button to select one or more programs among soak wash rinse spin Refer to the Selection method of the procedure programs for the selection Page 13 lL Ss I e Even there s no water inthe tub the spinning will start after acertain period Do not usesoak process forwoolen laundries e Wash the laundries that are prone to lose colors separately from other laundries The pulsator will not rotate unless the cen is filled to selected water level Selection method of the procedure programs ames of une Selected procedure Applicable procedure Contents the nixie tube indicates SELECTIONbutto n selection the programs about to run 0 Wash rinse spin When the common laundries need Soak Wash Rinse Spin 3 washing rinsing and spinning O O O 1 eel bat iquid Repeat using the washing liquid o ou e 2 Wash tinse the rinsing liquid Repeat using the washing liquid Soak Wash Rinse Spin remains in the tub O O 3 Ri i When the laundries need rinsing Soak Wash Rinse Spin Inse spin and spinning after
19. the machine up gently See to the figure Back I Soft items Bottom plate The largest allowed slope of the shank base of the machine is 2 The slanting or rough ground will result in unstable running or stoppage of the machine Please adjust it with following methods Adjust the adjustable foot 1 To twist the adjustable foot please loosen the adjustable nut and twist the foot 2 Fasten the nut after adjustment first lift up the side of the foot slightly How to change the direction of the drain hose S 1 Lean the machine down gently withthe front 3 Extend the drain hose from the left side Push surface facing the ground Loosen theeight the drain hose into the groove with hands screws by across screwdriver Back oS _ _ Bottom plate Front g O Soft item Push the drain hose into the groove with hands at this point 2 Pull out the drain hose from the groove at the right side 4 Install the bottom plate as per indicated before then lift the machine up gently Use groove at this side after Page 4 LS direction changing Usage of the drain hose The drainage shall be smooth with the drain hose 1 Put the drain hose up to suitable position A Mouth of Do not put it on ground fg drain hose Notes the mouth of drain pipe should higher than the water level of washing tub f
Download Pdf Manuals
Related Search