Graco 307282G User's Manual
Contents
1. an adapter and drain valve A B See Fig 1 Dual Filter System This setup enables you to redirect the fluid to another filter while one filter is cleaned or serviced Install two filters as shown in Fig 1 Install four suit able shutoff valves D one at each filter and outlet to redirect the fluid and isolate the filter not in use Filter Bypass System This setup enables you to redirect the fluid through pipes which bypass the filter while cleaning or serv icing the filter Install the filter and bypass pipes as shown in Fig 2 Install four suitable shutoff valves D one each at the filter inlet the filter outlet the bypass pipe inlet and the bypass pipe outlet These valves redirect the fluid and isolate the filter while cleaning and servicing 2 307282 A WARNING To reduce the risk of component rupture and serious bodily injury do not exceed 300 psi 21 bar Maximum Working Pressure or the maximum working pressure of the lowest rated component or accessory in your system Be sure all components and accessories are rated to withstand the maximum working pressure of your pump Fig 1 03709 03710 Fig 2 Service A CAUTION If the filter will not be used for a while thoroughly clean a2. or the furnishing performance or use of any products or other goods sold hereto whether due to a breach of contract breach of warranty the negligence of Graco or otherwise FOR GRACO CANADA CUSTOMERS The parties acknowledge that they have required that the present document as well as all documents notices and legal proceedings entered into given or instituted pursuant hereto or relating directly or indirectly hereto be drawn up in English Les parties reconnais sent avoir convenu que la r daction du pr sente document sera en Anglais ainsi que tous documents avis et proc dures judiciaires ex cut s donn s ou intent s a la suite de ou en rapport directement ou indirectement avec les procedures concern es Graco Phone Number TO PLACE AN ORDER contact your Graco distributor or call one of the following numbers to identify the distributor closest to you 1 800 328 0211 Toll Free 612 623 6921 612 378 3505 Fax All written and visual data contained in this document reflects the latest product information available at the time of publication Graco reserves the right to make changes at any time without notice This manual contains English MM 307282 Graco Headquarters Minneapolis International Offices Belgium China Japan Korea GRACO INC P O BOX 1441 MINNEAPOLIS MN 55440 1441 Copyright 1977 Graco Inc is registered to ISO 9001 www graco com Revised 2 2009 6 307282
3. the fluid through the bypass pipes or shut down the system Relieve fluid pressure by opening the drain valve B Holding the bowl with a wrench to keep it from turning screw the drain plug 10 out After the fluid has drained out remove the bowl element and spring Replace immediately with the spare bowl element and spring to keep the paint from drying on the housing 3 and other parts Install the element with the dome end up Lubricate the threads of the bowl before screwing it into the housing Tighten it securely Clean the bowl element and spring you removed with a compatible solvent before the paint dries Do not use a wire brush or sharp object to clean Store until needed NOTE Clean the filter element 7 with a small paint brush Blow out lodged particles with air and inspect for damage Replace if ruptured A 3 4 npt f Inlet and outlet p A 1 4 npt f drain port 03707 9 Fig 3 307282 3 Parts Model No 213057 to 213061 Includes items 1 to 10 Model No 214001 AN 3 4 npt f Inlet and outlet Includes items 1 to 6 8 to 10 A 1 4 npt f drain port Order the filter element separately from those listed under Ref No 7 1 Ref No Part No Description Qty N 1 104125 INDICATOR filter includes 1a 1 ae la O RING fluoroelastomer 1 See Accessories for CV75 o ring 3 2 104440 VALVE bypass 1 3 172699 HOUSING filter 1 6 103209 O RING fluoroelastomer 1 See Accessories fo
4. Instructions Parts List GRACO LOW PRESSURE MEDIUM VOLUME red alert Filters 307282G Filters fluids and indicates when filter requires cleaning 300 psi 21 bar Maximum Working Pressure 6 gpm 22 liter min Flow Capacity 36 sq in 230 cm Filtering Area Model No 213057 30 mesh 590 micron element Model No 213058 60 mesh 250 micron element Model No 213059 100 mesh 149 micron element Model No 213060 150 mesh 95 micron element Model No 213061 200 mesh 74 micron element Model No 214001 without element Important Safety Instructions 4g Read all warnings and instructions in this manual bi Save these instructions PROVEN QUALITY LEADING TECHNOLOGY Installation To clean or service the filter without shutting down the system install a dual filter or a filter bypass system as explained below The numbers and letters in parentheses refer to Figs 1 2 and 3 and the Parts Drawing Accessories and Technical Data are on the front page NOTE Allow 3 in 76 mm minimum clearance below the filter for easy removal of the bowl 9 Fluid Drain Valve required in all systems A WARNING A fluid drain valve is required in the base of each fluid filter Use this drain valve to relieve fluid pres sure in the filter to reduce the risk of serious injury including fluid injection and splashing in the eyes or on the skin Remove the 1 4 npt plug from the bottom of the filter and install
5. d by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use With the exception of any special extended or limited warranty published by Graco Graco will for a period of twelve months from the date of sale repair or replace any part of the equipment determined by Graco to be defective This warranty applies only when the equipment is installed operated and maintained in accordance with Graco s written recommendations This warranty does not cover and Graco shall not be liable for general wear and tear or any malfunction damage or wear caused by faulty installation misapplication abrasion corrosion inadequate or improper maintenance negligence accident tampering or sub stitution of non Graco component parts Nor shall Graco be liable for malfunction damage or wear caused by the incompatibility of Graco equipment with structures accessories equipment or materials not supplied by Graco or the improper design manufacture installation operation or maintenance of structures accessories equipment or materials not supplied by Graco This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect If the claimed defect is verified Graco will repair or replace free of charge any defective parts The equipment will be returned to the original purchaser transpor
6. ll the parts in solvent and blow them dry before the paint dries and clogs the filter To help prevent damaging the parts do not clean them with a wire brush or sharp object Indicator The indicator provides gradual warning of a dirty element When the indicator shows 3 4 red clean the element If not cleaned promptly the filter bypass valve opens and fluid will not be filtered Replace the indicator assembly 1 if the indicator is not working correctly it is always red or never red See Fig 3 To convert to a CV75 o ring for special applications fluid compatibility unscrew the indicator 1 remove the existing o ring 1a and replace with 551981 o ring must be ordered separately Bypass Valve The valve opens when a dirty element causes the filter s outlet pressure to drop 15 psi 1 bar below the inlet pressure This keeps the system pressure steady and prevents the element from collapsing Replace the bypass valve 2 if it is damaged or worn Valve O Ring The o ring seals the bowl 9 to the housing 3 If material leaks around the bowl replace the o ring 6 Remove the bowl and o ring Clean the parts ina compatible solvent Be careful not to damage the o ring or sealing surfaces of the bowl and housing Before assembling lubricate the parts with No 2 grease Bowl Element and Spring To reduce downtime keep a spare bowl 9 element 7 and spring 8 on hand Before removing the bowl direct
7. r PTFE o ring a 108106 ELEMENT filter 30 mesh 590 micron for Model 213057 only 1 108107 ELEMENT filter 7 60 mesh 250 micron for Model 213058 only 1 108108 ELEMENT filter 100 mesh 149 micron for Model 213059 only 1 108109 ELEMENT filter 150 mesh 95 micron for Model 213060 only 1 9 108110 ELEMENT filter 200 mesh 74 micron for Model 213061 only 8 102859 SPRING element ic al 172725 BOWL filter 10 100509 PLUG pipe 1 4 npt 1 1 Keep these spare parts on hand to reduce downtime a oot 4 307282 Accessories CV75 Indicator O Ring 116768 For use with materials not compatible with the stan dard fluoroelastomer indicator o ring PTFE Housing O Ring 102857 For use with materials not compatible with the stan dard fluoroelastomer o ring Drain Valve 208392 500 psi 34 Maximum Working Pressure 1 4 npt m x 3 8 npt f PTFE seal For relieving fluid pressure in the filter Technical Data Maximum Working Pressure 300 psi 22 bar Flow Capacity 6 gpm 22 liters min Filter Area oo ccc cece ee eee 36 sq in 232 cm Wetted Parts Anodized Aluminum 300 Series Stainless Steel PTFE Plated Steel Dimensions 000e 4 100 mm width 3 75 95 mm depth 8 75 220 mm height Weight ti c 0 anita Sao adidas 3 Ib 1 4 kg 307282 5 The Graco Standard Warranty Graco warrants all equipment manufacture
8. tation prepaid If inspection of the equipment does not disclose any defect in material or workmanship repairs will be made at a reasonable charge which charges may include the costs of parts labor and transportation THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE Graco s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above The buyer agrees that no other remedy including but not limited to incidental or consequential damages for lost profits lost sales injury to person or property or any other incidental or consequential loss shall be available Any action for breach of warranty must be brought within two 2 years of the date of sale Graco makes no warranty and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories equipment materials or components sold but not manufactured by Graco These items sold but not manufactured by Graco such as electric motors switches hose etc are subject to the warranty if any of their manufacturer Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties In no event will Graco be liable for indirect incidental special or consequential damages resulting from Graco supplying equipment hereunder
Download Pdf Manuals
Related Search