Goodman Mfg TSTATG2111 User's Manual
Contents
1. QUICK RELEASE FOR ACCESSORY PORT pg 13 1 Page 1 2 Goodman Alr Conditioning amp Heating D splay Features 1 Cl Set IB BB bm sete Y PLU 7 Service Filter CooL Pani x cheat i 1 Outside 0 35 OFFON M Mornin AUXHEAT ayNight Evening I TN Ere ui j 1 Mode Indicators Section 4 6 Selects the operational mode of the equipment HEAT Indicates the heating mode COOL Indicates the air conditioning mode AUTO Indicates the system will automatically changeover between heat and cool modes as the temperature varies OFF Indicates heating and cooling is turned off PROGRAM ON Indicates the time period program is enabled to run 2 Clock Section 3 Indicates the current time This clock is also used to program the time period schedule Room Temperature Display Section 5 Indicates the current room temperature and displays the outdoor temperature when selected Desired Set Temperature Section 4 5 Indicates desired room temperature s Outside icon Section 5 Indicates the temperature displayed is from the optional outdoor sensor Q Morning Day Evening amp Night icons Section 6 Indicates the day part of the time period program Page 1 3 S Goodman Air Conditioning amp Heating Display Features ae T s I6 BB Pr staristop Wz IOO 4 ULT N E at D m TE E FanOn o Setup icon Sections 6 11 Indic2. Goodman Air Conditioning amp Heating How to Set and Reset the Service Filter Fan Run Time Alert This counter keeps track of the number of hours of fan run time whether the fan is energized in the Heating or Cooling modes or in stand alone fan operation The Service Filter icon will appear after the preset number of hours of fan run time in step 7 below has been achieved Setting this counter to zero in step 7 will prevent the Service Filter icon from ever appearing Press SETUP button to Note Press the MODE I9 utton momentarily enter Setup screens to move through the setup screens Press and hold the MODE ud Press the MODE button repeatedly button to move back wards through the until this setup screen appears setup screens Hours the fan has run since last reset g Setup E Press Service Filter Ll Reset the counter to 0 to pea remove the Service Filter 7 icon from the display FAN m Setup Adjust the number of u i hours in increments of service Filter 50 the fan will run before the Service Filter icon appears on the display 0 off 0 1950 hours Ne k Press the PROGRAM button to leave the Setup screens If no buttons are pressed the display will leave the setup screens after 30 seconds Page 9 2 Goodma Air Conditioning amp Heating How to Set and Reset the UV Light Run T me Alert This counter keeps track of the number
3. Deadband Temp Swing Page 14 1 T 6 Goodman Air Conditioning amp Heating SECTION 15 Index A Accessory Port 13 1 Alerts see Run Time Auto adjust temperature 2 4 4 8 changeover 1 3 11 2 4 3 4 5 4 7 14 1 differential see Differential fan 7 2 icon 1 3 lockout 4 3 mode 2 3 AuxHeat icon 1 4 b reversing valve 10 2 Buttons down 1 2 2 2 2 4 8 3 12 3 emer ht 1 2 10 4 fan 1 2 2 4 7 2 12 2 front panel 1 2 mode 1 2 2 3 4 2 8 3 12 2 outdoor 1 2 5 2 program 1 2 4 2 6 2 set clock 1 2 2 2 up 1 2 2 2 8 3 C C 8 2 14 1 Calibration 12 3 Celsius 8 2 Clock display 1 3 setting 2 2 3 2 Compressor Lockout 11 3 Cool deadband see Deadband droop see Deadband electric heat pump 10 2 icon 1 3 indicator 1 2 mode 2 3 program see Program setpoint 2 3 2 4 6 2 6 4 Cycles Per Hour 11 3 14 1 Page 15 1 Day icon 1 3 programming 6 3 setting 1 2 2 2 3 2 Deadband Ist stage 11 4 11 5 14 1 Delay fan off see Fan Differential heat and cool 11 2 14 1 Disabled Keypad see Keypad Lockout EH 10 4 Electric Heating AuxHeat icon 1 4 jumper setting 10 3 14 1 Emergency Heat 10 4 EZ Programmer 13 1 caman SECTION 15 Air Conditioning amp Heating Index F F 8 2 14 1 Factory Defaults caution ii resetting 12 2 settings 12 2 Fahrenheit 8 2 Fan button function
4. Page 10 4 SECTION 11 Timers and Deadbands Section 11 Contents e Adjusting the Heat Cool Differential n 11 2 Adjusting the Cycles Per Hour 11 3 e Adjusting the Deadband 11 4 Page II I Goodman Air Conditioning amp Heating Adjusting the Heat Cool Differential The Heat and Cool setpoints will not be allowed to come any closer to each other than the value in this step This minimum difference is enforced during Auto Changeover operation Press SETUP button to Note Press the MODE enter Setup screens button momentarily to move through the setup screens Press the MODE OE Q Press the MODE button repeatedly button te move back J until this setup screen appears wards through the setup screens d IE Setup 13 Adjust the minimum E difference between 1 CooL cooling amp heating H EAT setpoints i A B gt Press the PROGRAM button to leave the Setup screens If no buttons al are pressed the display will leave the setup screens after 30 seconds Note To increase the spread between the heating and cooling setpoints press the MODE button until only the heat setpoint is displayed Adjust the desired setpoint Wait two seconds after adjusting the set point so the thermostat can accept the change Press the MODE button until only the cool setpoint is displayed Adjust the desired setpoint Wait two seconds afte
5. 12 09 Am tup an To adjust the Clock or Day use Warmer Press Press the SET ZN Cooler CLOCK button Qal N to return to normal operation Buttons To adjust the time b hours press and hold the FAN button while pressing the UP or DOWN buttons Page 2 2 Selecting the Heat or Cool Mode Goodman Air Conditioning amp Heating Select Mode by Pressing the MODE Button Heating Only The HEAT setting indicates the temperature the room has to reach before the furnace will turn on to heat the room Cooling Only The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room Heating or Cooling AUTO will automatically select heat or cool based on room temperature demand Time Schedule for Heating or Cooling The Program On setting will activate the time period programming for the cooling or heating setpoint ONLY Morning Day Evening amp Night Periods Off OFF indicates both heating and air conditioning systems are turned off 12 01 IC LILI Pm OOL Il IL OOL AUTO T i jar ILI 58 m NE CooL H4 Day r7 OFF y Press JN Press JN Press XN Press MODE N Goodm Air Conditioning amp Select ng Your Desired Temperature adjusting the setpoints AUTO OR PROGRAM MODE Pressing the UP or DOWN buttons in Auto or Program
6. the warranty period begins twelve weeks from the date of manufacture as indicated by the first four digits of the serial number yyww where yy inidcates the year and ww indicates the week of manufacture As its only responsibility and your only remedy Goodman will without charge replace any thermostat or thermostat part found to be defective due to workmanship or materials under normal use and maintenance For warranty credit the defective thermostat or thermostat part must be returned to a Goodman heating and air conditioning products distributor by a state certified or licensed contractor This warranty does not apply to labor freight or any other cost associated with the service repair or operation of the unit This warranty is in lieu of all other express warranties ALL IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THIS WARRANTY Installer Name Some states and provinces do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you GOODMAN SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO EXTRA UTILITY EXPENSES OR DAMAGES TO PROPERTY Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion may not apply to you Goodman is not responsible for
7. entered prior to this reset may be permanently lost Place the thermostat in the 12 0071 IC DD pm Su 123 OFF mode OFF IL Press and hold the MODE O OG Am ogra On BPN button While holding the SuloTuWeThFrSa ES oom MODE button press and hold env Light qu qu Co the FAN button for 5 seconds AUTO A l l Qutside A nee will appear on the Mornin t aD ap AURA display ayNig Nu T Iac Evenin anon V amm iu the FAN button for 5 seconds release the MODE and FAN After all of the icons appear buttons Then press and hold After the letters Fd appearon SY the display Factory Default release the FAN button Press the MODE button once to return to normal operation OFF IC DD em 123 IZ Page 16 2
8. of days since the UV Light counter has been reset The UV Light icon will appear after the number of days has been achieved as shown in step 9 below Setting the counter to zero in Step 9 will prevent the Service UV Light icon from ever appearing Press SETUP button to Note Press the MODE utton momentarii enter Setup screens to move through the setup screens Press and hold the MODE button to move back HODE Press the MODE button repeatedly wards through the until this setup screen appears b screens Days since the UV Light icon has been reset D Setup fm Press Service x Reset the counter to 0 to UV Light J remove the Service UV Light icon from the display Press the MODE button repeatedly until this setup screen appears MODE g Setup a Adjust the number of days service in increments of 10 before UV Light the UV Light icon appears on the display 0 off Press _ 0 1990 days Press the PROGRAM button to leave the Setup screens If no buttons are pressed the display will leave the setup screens after 30 seconds Page 9 3 SECTION 10 Electric Heat and Heat Pump Operation E Section 10 Contents amp Viewing the Heat Pump and Reversing Valve Jumper Settingiano ionin 10 2 Viewing the Electric Heat Jumper Setting 10 3 e Using Emergency Heat 10 4 Page 10 1 Goodman Air Conditi
9. setup screens after 30 seconds Page 4 2 Goodman Air Conditioning amp Heating Manual or Auto Changeover Thermostat 4 When the very simplest operation is desired this thermostat may be configured to be a manual heat and cool thermostat with or without time period programmability Follow the step below The thermostat may be programmed to function as a Heat Only or Cool Only thermostat by selecting NO in the setup screen below This will lockout the Auto Changeover screen and only allow the Off Heat Cool and Program On screens to be accessed Press SETUP button to Note Press the MODE button momentarily enter Setup screens to move through the setup screens Press and hold the MODE Press the MODE button repeated button to move back a thi wards through the until this setup screen appears setup screens YES y ES Setup par Select Yes if you would L like the thermostat to be Auto Changeover or AUTO No for a Heat Only and Cool Only Thermostat 7 NO Press the SETUP button to leave the Setup screens If no buttons are pressed the display will leave the setup screens after 30 seconds Page 4 3 Goodman Air Conditioning amp Heating Operating Mode when the Thermostat is Configured to be NON PROGRAMMABLE WITH MANUAL CHANGEOVER If the thermostat is configured to be a non programmable thermostat with 4 Manual Changeover the following scr
10. two minutes nd B The temperature spread from the setpoint is equal to or greater than the setpoint plus the 1st stage deadband step 15 next page plus two degrees gt Heating Deadband Deadband Deadband db 2 db 1 fixed 2 adi 1 6 Cooling 2nd Stage 1st Stage Heat Cool turn on turn on Setpoint Setpoint turn on 1st Stage 4 amp DECREASE TEMPERATURE INCREASE Page ll 4 Goodman Air Conditioning amp Heating Adjusting the Deadband For more detailed information please see the explanation on the previous page Press SETUP button to Note Press the MODE J button momentarily enter Setup screens to move through the setup screens Press and hold the MODE pone O Press the MODE button repeatedly button to move back i wards rou e until this setup screen appears setup Pact i y Setup y Adjust the deadband Pa for the 1st stage 1 a f Press oD Press the PROGRAM button to leave the Setup screens If no buttons are ae pressed the display will leave the setup screens after 30 seconds Page 11 5 SECTION 12 Factory Defaults and Calibration SES Section 12 Contents e Resetting the Thermostat to the Factory Default Settings 12 2 Calibrating the Temperature OTIS OF CH 12 3 Page 12 1 Goodma Air Conditioning amp Heating Calibrating the Temperature and Humidity Sensors Under normal circumsta
11. 1 Damage or repairs required as a consequence of faulty installation or application Damage as a result of floods fires winds lightning accidents corrosive atmosphere or other conditions beyond the control of Goodman Use of components or accessories not compatible with this thermostat Products installed outside the United States or Canada Damage or repairs required as a result of any improper use maintenance operation or servicing Failure to start due to interruption and or inadequate electrical service Changes in the appearance of the unit that do not affect its performance This warranty gives you specific legal rights and you may also have other rights that may vary from state to state or province to province Installation Date Model Serial Amana amp Goodman brand products For further information about this warranty contact Goodman Consumer Affairs at 877 254 4729 or by mail to 7401 Security Way Houston Texas 77040 2009 Goodman Manufacturing Company L P Page 16 1 P N 88 746 Rev 2 Goodman Resettin the Thermostat to the Alr Conditioning amp Heating Factory Default Settings for default values see page 14 1 If for any reason you desire to return all the stored settings back to the factory default settings follow the instructions below WARNING This will reset all Time Period and Advanced Programming to the default settings Any information
12. N Light continuously AUTO OFF Light for 8 seconds Press after a button press MODE Programming the Thermostat to Disp Temperature in Fahrenheit or Celsius c Setup c l Select thermostat EES operation in degrees l Fahrenheit or Celsius eS F 1 Press Press the PROGRAM button to leave the Setup screens If no buttons are pressed the display will leave the setup screens after 30 seconds Page 8 2 Goodman Locking Unlocking the Keypad To prevent unauthorized use of the thermostat the front panel buttons may be disabled To disable or lock the keypad press and hold the MODE button While holding the MODE button press the UP and DOWN buttons together The a icon will appear on the display then release the buttons Press all three buttons in the order outlined above for keypad lockout MODE gt Air Conditioning amp Heating 12 0000 IC LILI Pm AUTO w CooL 1 2 o Jo Heat Lu Lii To unlock the keypad press and hold the MODE button While holding the MODE button press the UP and DOWN buttons together The Q icon will disappear from the display then release the buttons Page 8 3 SECTION 9 Programming Run Time Alerts Section 9 Contents e Setting and Resetting the Service Filter Fan Run Time POT 9 2 Setting and Resetting the UV Light Run Time Alert 9 3 Page 9 1
13. Owner s Manual Model 1 Day Programmable TSTATG21 1 Digital Thermostat USS With mosey systems up to 2 Heat amp 1 Cool 2 Heat 1 Coo F Daa Z e Control up to 2 Heat amp Cool Stages s Displa ES door Sensor Ready A cepts Optional E ET Configurable in Setup Auto or Manual changeover E Programmable or Non Programmable Good Air Conditioning amp Heating NCAUTION Follow the Installation Instructions before proceeding Set the thermostat mode to OFF prior to changing settings in setup or restoring Factory Defaults This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Thermostat TSTATG2111 C US Tested to Comply with FCC Standards 4z95 FOR HOME OR OFFICE USE Pagei How to Use This Manual Goodman Air Conditioning amp Heating The Table of Contents divides the thermostat features into sections making it easier to quickly find information The first page of each section contains a more detailed Table of Contents for each section such as the example page shown below SECTION 14 I Timers and Deadbands Header shows section Section 14 Contents and title of section Adjusting the Heat Cool Differen
14. ates the thermostat is in the setup mode O Fan On icon Section 7 Indicates constant continuous fan operation When Fan On is not lit indicates the fan will only operate when necessary to heat or to cool 9 Service Filter icon Section 9 Appears when the filter should be serviced under normal conditions Adjustable from 0 1950 hours of blower operation Qs 2 icon Section 8 S ndicates the keypad has been locked D StartStop icon Section 6 Appears when programming timer functions 12 AuxHeat icon Page 11 4 Indicates the Heat Pump is currently using 2nd stage electric strip heat UV Light icon Section 9 Appears when the UV bulb should be serviced under normal conditions Adjustable from 0 1990 days of operation Page 1 4 SECTION 2 Quick Start Section 2 Contents amp Setting the Clock 2 2 Selecting the Heat or Cool MOOG T M 2 3 8 Selecting Your Desired Temperature 2 4 Using the Fan Button 2 4 Note Following the instructions in this section will allow you to operate your thermostat using the factory default settings These settings are depicted in the illustrations throughout this manual Page 2 1 Goodman Air Conditioning amp Heating QC During Setup amp Programming Setting the Clock Pressing the UP or DOWN buttons will modify the flashing selection Fl Sett
15. e I 1 Day ILU A 1 00 MOBE IC LILI Pm Su o OFF l 1 AP ILI Page 4 6 Goodman Air Conditioning amp Heating Operating Mode when is Configured to be PROGRAMMABLE WITH Auto Changeover configured to be a programmable thermostat with Auto Changeover the following screens will be available by pressing the MODE button the Thermostat f the thermostat is Select the Mode by Pressing the MODE Button Heating Only The HEAT setting indicates the temperature the room has to reach before the furnace will turn on to heat the room Cooling Only The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room Heating or Cooling AUTO will automatically select heat or cool based on room temperature demand Time Schedule for Heating or Cooling The Program On setting wil activate the time period programming for the cooling or heating setpoint ONLY Morning Day Evening amp Night Periods Off OFF indicates both heating and air conditioning systems are turned off 13 07 IC LILI Pm Su ap I l HEAT ILI 58 Ear 5 Ww HT S AUTO HEAT ILI 58 12 08 om Preaemon 0T Ou ILI 58 a bo 19 007 IC LILI Pm Su OFF Page 4 7 y Press MODE JN Press A Press war XN Press N Goodm Air Conditioning amp Heatin Selecting Your Desi
16. ee Outdoor Sensor Run Time resetting see Reset setting service filter 9 2 14 1 Page 15 3 UV light 9 3 14 1 Schedule daily see Program Sensor outdoor see Outdoor thermostat see Thermostat Sensor Service filter icon see Reset UV light see Reset Set Clock see Clock Setpoint cool see Cool heat see Heat Setup Icon 1 4 Simplest Operation 4 2 4 3 T Thermostat Sensor calibrate 12 3 Time see Clock Time Delay compressor lockout 11 3 e SECTION 15 Goodman Ai Gonening nth Index cycles per hour 11 3 14 1 Time Schedule see Program UV Light icon 1 4 resetting see Reset run time see Run Time setting see Run Time Warranty 16 1 Page 15 4 SECTION 16 LIMITED WARRANTY Models TSTAT 1100 2100 1152 and 2152 2200C 3271C 3272C 2111 3272 3273 This thermostat is warranted by Goodman Manufacturing Company P Goodman to be free from defects in materials and workmanship under normal use and maintenance as described below The thermostat is warranted for a period of ONE YEAR except as provided below No warranty continues after the thermostat is removed from the location where it was originally installed No warranty applies to and no warranty is offered by Goodman on any thermostat ordered over the Internet The warranty period begins on the date of the original installation If that date cannot be verified
17. eens will be available by D pressing the MODE button Select the Mode by Pressing the MODE Button 12 001 HC LILI Pm Heating Only The HEAT setting indicates the em temperature the room has to reach before the furnace will turn on to heat the room D 2 Cooling Only itas The COOL setting indicates the em am temperature the roorn has to reach before the air conditioner will turn on to cool the room Ic LI Pm Off OFF indicates both heating and air conditioning OFF systems are turned off Page 4 4 Goodman is Configured to be NON PROGRAMMABLE WITH AUTO CHANGEOVER thermostat is configured to be a non programmable thermostat with Auto Changeover the following screens will be available by pressing the MODE button Operating Mode when the Thermostat Air Conditioning amp Heating If the Select the Mode by Pressing the MODE Button Heating Only The HEAT setting indicates the temperature the room has to reach before the furnace will turn on to heat the room Cooling Only The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room Heating or Cooling AUTO will automatically select heat or cool based on room temperature demand Off OFF indicates both heating and air conditioning systems are turned off Page 4 5 12 0 ILLOD Pm 7 HEAT i L
18. he display Page 5 2 SECTION 6 Programming the Daily Schedule Section 6 Contents BEN Programming a Daily Schedule oerte neces 6 2 Page 6 1 Goodman Air Conditioning amp Heating Programming a Daily Schedule Press Press the PROGRAM button to enter time PROGRAM period programming 6 33 Am LILI Start Adjust the start time for Morning Morning 6 00 38 Adjust the cooling Ed setpoint for Morning 35 99 Morning 10 Adjust the heating Aird setpoint for Morning 99t 35 98 Morning HEAT wh ILI OO Adjust the start time for Day 8 08 Am wus Start Day Page 6 2 Continued dni Goodman Air Conditioning amp 8 00 oc Lu Adjust the cooling CooL setpoint for Day 35 99 Day B J GOB 7 Am Me c Adjust the heating v3 setpoint for Day oor 35 99 B Hen ay Z Lic b m WLS Pm Start Adjust the start time for Evening Evening 5 07 pm Adjust the cooling Los setpoint for Evening OOL 35 99 Evening wl iL Adjust the heating CooL setpoint for Evening go HEAT 35 99 T Evening ILI MOD Page 6 3 Continued dne Press Goodman Air Conditioning amp Heating m ILI LILI Pm Start Adjust the start time for Night Night ILI GO Pm os Adjust the cooling ac setpoint for Nig
19. ht ooL 1995 29 Night 0 00 Pm os Adjust the heating LL setpoint for Night CooL 35 981 HEAT Night Z d Press Ll Press the PROGRAM button to leave the Setup screens If no buttons are p e d pressed the display will leave the setup screens after 30 seconds Page 6 4 SECTION 7 Goodman Moning amp Het Programming the Fan Operation Section 7 Contents Using the Fan Button 7 2 e Setting the Fan Off Time ES ee eon arr 7 3 Page 7 1 Goodman Air Conditioning amp Heating Using the Fan Button When the fan is set for automatic operation it will energize any time there is a call for heating or cooling otherwise the fan will remain off Pressing the FAN button will energize the fan and display the FanOn icon on the thermostat display To operate the fan in the automatic mode press the FAN button again and the FanOn icon will disappear Press 13 0 qmm IC LILI Pm VL IC Fan On indicates constant fan m a CooL operation You may turn the fan AUTO T i on even if the thermostat is in the Heat Off mode Pressing the FAN button bl I toggles this feature on or off FanOn ep Lii Page 7 2 Goodman Air Conditioning amp Heating Setting the Fan Off Time Delay To increase the cooling efficiency of your unit the thermostat may be programmed to continue running the fan after a call for cooling has been satisfied Thi
20. i b a O MODE 12 08 pm 7c O 2 me we jw 13 nn Tai MODE IC LILI Pm AUTO l 1 5 P HEAT 12 03 sine o ne OFF l 1 ILI Goodman Air Conditioning amp Heating Operating Mode when the Thermostat is Configured to be PROGRAMMABLE WITH MANUAL CHANGEOVER If the thermostat is configured to be a programmable thermostat with Manual Changeover the following screens will be available by pressing the MODE button Select the Mode by Pressing the MODE Button Heating Only The HEAT setting indicates the temperature the room has to reach before the furnace will turn on to heat the room Cooling Only The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room Time Schedule for Heating Only The HEAT Program On setting will activate the time period program for the heating setpoint ONLY Morning Day Evening amp Night Periods Time Schedule for Cooling Only The COOL Program On setting will activate the time period program for the cooling setpoint ONLY Morning Day Evening amp Night Periods Off OFF indicates both heating and air conditioning systerns are turned off 12 070 IC LILI Pm y UT We ILI HEAT 58 15 l 1 CooL ILI Program On a UT MODE 12 0073 IC LILI Pm 13 0 IC LILI Pm HE Ed Day ILI 58 Ic DD uos rmm on 7 am
21. ing the Time Period Programming Programmable Thermostat A thermostat that has the capability of running the Time Period Programming Temperature Swing Same as Deadband Time Period Programming A program that allows the thermostat to automatically adjust the heat setpoint and or the cool setpoint based on the time of day Page Table of Contents Page iv Goodman Air Conditioning amp Heating Getting to Know Your Thermostat Quick Start Setting Clock Basic Operation Viewing the Outdoor Temperature Programming the Daily Schedule Programming the Fan Operation ermostat Display Options Programming Run Time Alerts ectric Heat and Heat Pump Operation imers and Deadbands en 10 11 12 Calibration Accessories J iz a 3 y S Fy 7 EU E Q Advanced Setup Table 14 SECTION 1 Getting to Know Your Thermostat Gers 1 Section 1 Contents Front Panel Buttons 1 2 Display Features 1 3 Page I I Goodman Air Conditioning amp Heating Front Panel Heat or Cool Demand Indicator i Red Heat Green Cool Backlit LCD Display sometimes refer sometimes refer red to as the Cooler Button E Warmer Button red to as the DOWN button utton UP button FAN SETUP T A If SET CLOCK u OUTDOOR PROGRAM
22. lled using an IR Remote Control The thermostat may also interface with other wireless systems in your home For more information see the manual for the IR Receiver TSTATGAC0431 EZ PROGRAMMER optional accessory When the EZ Programme i is connected the thermostat Time Period Programming and Advanced Setup Programming can be stored into the EZ Programmer s memory This information can then be uploaded to other TSTATG2111 thermostats For more information see the manual for the TSTATGAC0432 COMFORT CALL optional accessory When Comfort call is connected the thermostat s Heating and cooling functionality may be accessed and controlled through the phone For more information see the manual for Comfort Call TSTATGACO433 Page 13 1 SECTION 14 Advanced Setup Table Df 8 Step Description 1 Programmable Thermostat Range Yes No Reset UV Light Icon Goodi Air Conditioning amp Heating Auto Changeover Thermostat Yes No UV Light Run Time Set read only 0 1990 0 Fan Off Delay 0 30 60 90 Heatpump Jumper Settin read only Thermoglow Backlight Auto On Off Reversing Valve Jumper Setting read only Electric Heat FIC orC Reset Service Filter read only Minimum Heat Cool Differential read only 0 6 Cycles Per Hour di d 28 con Service Filter Run Time Set 0 1950 Df Factory Default Setting
23. mode will adjust both the heat and cool set temperatures simultaneously Adjust the desired Set temperature with the IC ILI Pm a Warmer I a AUTO 7 CooL buttons HEAT ILI 55 HEAT OR COOL MODE Pressing the UP or DOWN buttons in Heat or Cool mode will adjust only the heat or cool set temperature Adjust the desired A set temperature with the IC LILI Pm pm Warmer IL r e ILI buttons Using the Fan Button Press 2 00 pm IC n Tr Fan On indicates constant fan m aml CooL operation You may turn the fan AUTO ll i on even if the thermostat is in the HEAT Off mode Pressing the FAN button T co toggles this feature on or off a oo Page 2 4 FanOn SECTION 3 Setting the Clock EE Section 5 Contents Setting the Clock 3 2 Note During setup amp programming pressing the UP or DOWN buttons will modify the flashing selection Page 3 1 Goodman Air Conditioning amp Heating Press P Setting the Clock Ie v Setup 1 I Press Press the SET 7 S CLOCK button Qal to return to normal operation Page 3 2 During Setup amp Programming Pressing the UP or DOWN buttons will modify the flashing selection To adjust the Clock or Day use Warmer Cooler O YZ Buttons To adjust the time b hours press and hold the FAN button while pressing the UP o
24. nces it will not be necessary to adjust the calibration of the temperature and humidity sensors If calibration is required please contact a trained HVAC technician to correctly perform the following procedure o POD m o MODE Place the thermostat in the 1 j OFF mode i OFF ii op Am Program On Setup Press and hold the MODE 19 56 fm StartStop 4 Dd button While holding the Service Filter Demi MODE button press and hold Ran UV Light emm 7o CooL the FAN button for 5 seconds AUTO j Vacation All icons will appear on the Mornin amp AUXHEAT i DayNight display Evening Ii TD BB THERMOSTAT SENSOR Press the UP and DOWN buttons em ap atthe same time twice The l thermostat temperature will be displayed and may be calibrated using the UP or DOWN buttons After calibration is complete press the MODE button once to return to normal operation Page 12 3 SECTION 13 Goodman Accessories Goodman ACCESSORY PORT The RJ11 Jack is used to connect the TSTATG2111 to the IR Receiver TSTATGAC0431 for wireless communication or the EZ Programmer TSTATGAC0432 for easy downloading or uploading of thermostat information The Accessory Port is located on the bottom of the thermostat PT T RJ11 Type Jack f IR RECEIVER REMOTE CONTROL optional accessory When the IR Receiver is connected the thermostat can be contro
25. of the thermostat see page 4 3 of the Installation Instructions Press SETUP button to Note Press the MODE enter Setup screens button momentarily to move through the setup screens Press and hold the MODE Q Press the MODE button repeatedly button fo move back ji ji wards throu e until this setup screen appears Mem ereere m Setup r ON indicates that the ic thermostat jumper is P md set for Electric Heat operation or OFF for OFF Gas Electric or Heat e a Pump operation l a Press a Press the PROGRAM button to leave the Setup screens If no buttons are pressed the display will leave the setup screens after 30 seconds Page 10 3 Att Conditioning amp Heating Using Emergency Heat ENTER EMERGENCY HEAT Only available if you have a Heat Pump installed To initiate the Emergency Heat feature press the FAN button While holding the FAN button press the SETUP button The Cool setpoint display will read EH emergency heat Press for Emergency Heat OPERATION During Emergency Heat operation the thermostat will turn on the fan and the 2nd stage of heat when there is a demand for heat Also during Emergency Heat the 1st stage of heating or cooling will be unavailable EXIT EMERGENCY HEAT Follow the same steps as entering Emergency Heat by pressing the FAN and SETUP but tons During Emergency Heat only OFF and HEAT modes are available by pressing the MODE button
26. oning amp Heating Viewing the Heat Pump and Reversing Valve Jumper Settings Steps 10 and 11 are Read Only and may only be set with the jumpers on the circuit board of the thermostat see page 4 4 of the Installation Instructions W Press SETUP button to wu O enter Setup screens Press the MODE button repeated until this setup screen appears ON Heat Pump operation OFF Gas Electric operation Note Press the MODE button momentarily to move through the setup screens Press and hold the MODE button to move back wards through the setup screens OFF r1 Setup LI that the jumper Indicates thermostat is set for an O reversing valve energize in cooling or a b reversing valve energize in heating Press the PROGRAM button to pressed the display will I l Setup i ILI l MODE oo Press leave the Setup screens If no buttons orc aiia leave the setup screens after 30 seconds Page 10 2 Goodman Air Conditioning amp Heating Viewing the Electric Heat Jumper Setting Placing the jumper on ELEC will cause the thermostat to turn on the fan immediately any time there is a heat demand Since most gas furnaces control the fan this feature should be off unless it is necessary for the thermostat to energize the fan with first stage heat Step 12 is Read Only and may only be set with the jumpers on the circuit board
27. r DOWN buttons SECTION 4 Basic Operation Section 4 Contents e Programmable or Non Programmable Thermostat 4 2 s Manual or Auto Changeover TIBhOF osa acus rnit in apadts 4 3 Selecting the Operating Mode 4 4 Selecting Your Desired Temperature 4 8 Note During setup amp programming pressing the UP or DOWN buttons will modify the flashing selection Page 4 1 Goodman Air Conditioning amp Heating Programmable or Non Programmable Thermostat When the very simplest operation is desired this thermostat may be configured to be non programmable with or without Auto Changeover Follow the step below If NO is selected the thermostat will lockout the Program On screen only the Off Heat Cool and Auto screens may be accessed by pressing the MODE button Select YES if you would like your thermostat to be programmable then the Program mode will be accessible through the use of the MODE button Note Press the MODE button momentarily to move through the Nw Press SETUP button to setup screens Pross J ani o e enter Setup screens button fo move backe wards through the setup screens VES YES Programon Setup Select Yes if you would like the thermostat to be program mable or No for non program mable Press Press the SETUP button to leave the Setup screens If no buttons are pressed the display will leave the
28. r adjusting the set point so the thermostat can accept the change Press the MODE button again to enter the Auto Changeover mode where both the heat and cool setpoints are displayed Page 11 2 Goodman Air Conditioning amp Heating Adjusting the Cycles Per Hour The Cycles Per Hour setting may limit the number of times per hour your HVAC unit may energize For example at a setting of 6 cycles per hour the HVAC unit will only be allowed to energize once every 10 minutes The Cycles Per Hour limit may be overridden and reset by pressing the UP or DOWN buttons on the thermostat W Press SETUP button to Note Press the MODE J button momentarily enter Setup screens to move through the setup screens Press and hold the MODE cie Q Press the MODE button repeatedly button to move back z B wards through the until this setup screen appears setup screens Setup Select the cycles per 4 hour limit d cycles per hour limit defeated d1 d defeat 5 min MD p compressor lockout f LI Press _ d1 d 2 6 um Press the SETUP button to leave the Setup screens If no buttons are p d pressed the display will leave the setup screens after 30 seconds Page 11 3 Goodman Air Conditioning amp Heating Adjusting the Deadband MULTI STAGE OPERATION Controls up to two Heat and one Cool stages The 2nd Stage of heat is turned on when A The 1st Stage has been on for a minimum of
29. red Temperature adjusting setpoints AUTO OR PROGRAM MODE Pressing the UP or DOWN buttons in Auto or Program modes will adjust both the heat and cool set temperatures simultaneously For more information on this see page 11 2 Adjust the desired 2 00 om 7c Set temperature with the DES L o Jo e m au CooL AUTO l HEAT ILI 8 i buttons HEAT OR COOL MODE Pressing the UP or DOWN buttons in Heat or Cool modes will adjust only the heat or cool set temperature Adjust the desired 12 08 om os set temperature with the buttons Page 4 8 SECTION 5 Viewing the Outdoor Temperature Gc Section 5 Contents e Viewing the Outdoor Temperature 5 2 Page 5 1 Goodman Air Conditioning amp Heating Viewing the Outdoor Temperature This requires an outdoor sensor optional accessory to be installed see page 4 6 of the Installation Instructions To read the temp erature from the Outdoor Sensor press the OUTDOOR butfon The display will then show the current outdoor temperature 5 Press 93 The current outdoor temperature will be m 5 displayed This reading l Outside Current outdoor is from the sensor e em temperature connected to OUT f as e Press the OUTDOOR SSS button to return to Ze normal operation Note If no sensors are connected 2 dashes will appear on t
30. s delay may be set for 30 60 or 90 seconds If the Fan Off Delay is set for zero seconds the fan will not energize after a call for cooling has been satisfied W Press SETUP button to Note Press the MODE enter Setup screens button momentarily to move through the setup screens Press and hol e MODE O Press the MODE button repeatedly button to move back until this setup screen appears wards through the setup screens HT Setup C RN Set the Fan Off Delay to 0 30 60 or 90 seconds Press FanOn Press the PROGRAM button to leave the Setup screens If no buttons are dme pressed the display will leave the setup screens after 30 seconds Page 7 3 SECTION 8 Thermostat Display Options Section 8 Contents Turning On Off the Backligt eeier euer ar nura eu nain ax 8 2 e Programming the Thermostat to Display Temperature in Fahrenheit or Celsius 8 2 e Locking Unlocking the ROY PAO B 8 3 Page 8 1 Goodman Air Conditioning amp Heating Turning On Off the Backlight W Press SETUP button to Note Press the MODE J utton momentarily enter Setup screens to move through the setup screens Press and hold the MODE Press the MODE button repeated button to move back MODE n wards through the until this setup screen appears setup screens Setup LI AP Select backlight operation AUTO Light from 6pm to 6am nightly O
31. see Buttons off time delay 7 3 14 1 on during heat see Electric Heat on icon 1 4 2 4 7 2 run time 9 2 2nd stage heat see Emergency Heat Fd 12 2 Flashing Selection 2 2 Gas Furnace control the fan 10 3 jumper 10 2 Green Indicator 1 2 Heat Ist stage deadband see Deadband emergency heat 10 4 2nd stage emergency heat 10 4 electric strip heat 1 4 AuxHeat icon 1 4 deadband see Deadband droop see Deadband electric heat pump 10 2 icon 1 3 1 4 indicator 2 mode 2 3 program see Program setpoint 2 3 2 4 6 2 6 4 Heat Pump AuxHeat 1 4 emergency heat 10 4 jumper setting 10 2 Page 15 2 IR Receiver 13 1 Jumpers electric heat 10 3 gas electric 10 2 heat pump 10 2 14 1 reversing valve 10 2 14 1 Keypad Lockout 1 4 8 3 LCD 1 2 Locked Indication see Keypad Lockout Goodman Air Conditioning amp Heating SECTION 15 Manual changeover 4 3 4 4 4 6 cool 4 3 heat 4 3 Multi stage Operation 11 4 z Non Programmable Thermostat 4 2 4 4 4 5 o O Reversing Valve 10 2 Off Mode 1 3 2 3 Outdoor button see Buttons icon 1 3 sensor 1 3 5 2 viewing temperature 1 3 5 2 Program daily schedule 6 2 6 4 mode 1 4 4 6 4 7 On icon 2 3 Programmable Thermostat 4 2 4 6 4 7 R Red Indicator 1 2 Reset thermostat settings see Factory Defaults run time fan filter 9 2 14 1 UV light 9 3 14 1 OUT s
32. tial 14 2 a Adjusting the Cycles Per Hour esses 14 3 Section contents Adjusting the Minutes of page Run Time Before the rmm Next Stage 14 6 i Selecting 2nd Stage Turn Visible section tab Off Temperature 14 7 on the side of the v Adjusting the Deadband 14 4 Section and page Page 14 1 l In addition this manual also has an Index to help you find any information regarding this thermostat quickly Page ii Glossary of Terms Gesdman Air Conditioning amp Heating Auto Changeover A mode in which the thermostat will turn on the heating or cooling based on room temperature demand Cool Setpoint The warmest temperature that the space should rise to before cooling is turned on without regards to deadband Deadband The number of degrees the thermostat will wait once setpoint has been reached before energizing heating or cooling Differential The forced temperature difference between the heat setpoint and the cool setpoint Heat Setpoint The coolest temperature that the space should drop to before heating is turned on without regards to deadband Icon The word or symbol that appears on the thermostat display Mode The current operating condition of the thermostat i e Off Heat Cool Auto Program On Non Programmable Thermostat A thermostat that does not have the capability of runn
Download Pdf Manuals
Related Search