GIGABYTE GN-WPKG User's Manual
Contents
1. Address Emails Model Date of Purchase Place of Purchase From Whom Distributor Customer Service GIGA BYTE TECHNOLOGY CO LTD No 6 Bau Chiang Road Hsin Tien Taipei Hsien Taiwan R O C Tel 886 2 8665 2665 Fax 886 2 89124007 http www gigabyte com tw Technical Support E mail networksupport 9 GIGAB YTE com tw 232. 596 802 119 backward compatible to 802 115 Frequency Bands 2412 2484 MHz subject to local regulations Modulation Technology OFDM and DSSS Modulation Techniques 64QAM 16QAM QPSK BPSK CCK DQPSK DBPSK Data Rates 54 48 36 18 12 9 11 6 5 5 2 and 1 Mbps auto fallback Peak Output Power 20dBm Nominal Temp Range Minimum Receive Sensitivity 70dBm 54Mbps 87dBm 11Mbps Antenna External antenna certification Temperature Range FCC Part 15 USA DGT Taiwan CE Europe TELEC Japan Operating 0 55 deg C Storing 20 65 deg C Humidity Max 9096 Non condensing Driver Windows 98SE Me 2000 XP Securit WPA PSK TKIP AES 802 1X client for Windows y 64 128 bit WEP Roaming Seamless roaming among 802 11b g access points Management Utility Monitors the network situation Dimensions 134mm 121mm 22mm 134mm 81mm 22mm Weight 55 grams Packaging Packaging specially used by Gigabyte LED indicators Act and Link Subject to change without notice 21 Appendix Regulatory Information CE Mark Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital
3. PROF PSH Power Saving Kisak nhashuchuns TP RTS 0 Fragment Threshold Figure 3 3 Configuration Description of items in Figure 3 3 is as follows Profile Name Users can save different profiles names for different configurations SSID Select the AP detected by the system from the drop down menu or input a SSID Default ANY Power Saving mode Select Power Saving Mode PSM to turn off the Adapter s transceiver when not in use or select CAM to continuously turn on transceivers Default OFF Network Type Infrastructure and 802 11 Ad Hoc When Infrastructure network type is chosen PSM will function but not Preamble On the contrary when Ad hoc type is chosen see Figure 3 4 Preamble will function but not PSM Also the Channel option will appear and 802 1X Authentication will be disabled Default Infrastructure Praljka ais Authenicaion are Seeurip Advanced Files PROF eer auta RTS Fregnesni T haeshold Figure 3 4 Configuration Screen TX Power Select percentage of transmitted power Default Auto RTS Threshold This is a mechanism implemented to prevent the Hidden Node problem Hidden Note is a situation in which two stations are within range of the same Access Point but are not within range of each other Therefore they are hidden
4. eee 7 Suc PROA E 7 3 2 LINK STATUS 16 O02 OME DURVEY TAB 17 94 FS TAVIS TAC SAB 18 ht a SA Ru 19 APPENDIX A TROUBLESHOOTING een 20 APPENDIX B SPECIFICATIONS 21 APPENDIX C REGULATORY INFORMATION 22 APPENDIX D GENERAL PUBLIC LICENSED 0000000 APPENDIX E WARRANTY eterne tennss 23 Chapter 1 Product Overview 1 1 Introduction to the GN WPKG Wireless PCI Adapter The Gigabyte WPKG Wireless PCI Adapter installs quickly into your motherboard s PCI slot connecting wirelessly to your Wi Fi Router instantly transforming your PC into a wireless AP broadening the range of your wireless network The WPKG is fully 802 11b interoperable meaning it connects seamlessly to both 11b and 11g wireless traffic and with its dynamic speed adjustment feature it will always connect at the highest possible speed up to 54Mbps The Gigabyte WPKG Wireless G PCI Adapter makes connecting to a wireless router or access point a cinch with its included WLAN software utility SoftAP that automatically detects and lists all available wireless networks Since the WPKG can be setup in Wireless Distribution System WDS it transforms your desktop into an wireless access point effec
5. Click Finish to complete installation VWirnnd Completa irzisiS ra plri bes raising gabi GHANVPEG 19 in im Chapter 3 Using the Wireless Utility The WPKG Wireless Utility is powerful application that helps you to configure the network card and monitor the statistics of the communication link This application permits the configuration for parameters while the card is operating It also offers more configuration options and supports Windows 98SE Me 2000 XP Switch between AP mode and Station mode with just a right click of the mouse on the icon Windows XP 2000 users only It appears as an icon in the task bar at the bottom right corner of screen whenever the card is operating see Figure 3 1 The quick start icon also doubles as a signal strength monitor as indicated by its four small green lights dmg siam amp Figure 3 1 WPKQG Utility quick start icon To open the WPKG Utility either double click the quick start icon located in your system tray or from the Windows Start menu select Programs GIGA BYTE 802 11 WLAN GN WPKG SoftAP and then GN WPKG Utility Note You may only use the utility to change wireless configurations when the WPKG Adapter is enabled and operating You have to use Windows native Zero Configuration tool provided with Windows when the Adapter is not enabled 3 1 Profile Tab The Profile tab shows you the current association information about the
6. Setting Window and the Certification Tab see Figure 3 6 From the Certification screen you may configure information about authentication such as Tunnel Protocol ID and Password and Client Certificate or Certificate Chain see Figure 3 6 and 3 8 1 Seting Servet identity Use Chet certlicale leased Expired On Mame Tunneled Authertication Protocol EAP MSCHAP v2 Identity Figure 3 6 802 1 Authentication Description of items in Figure 3 6 is as follows Authentication type PEAP TLS Smart Card TTLS LEAP and MD5 Challenge Default PEAP Identity The Account s User ID Password Passwords for users accounts can be used when LEAP and MD5 Challenge are selected as authentication types Use Client Certificate This certificate is necessary for TLS and an option for PEPA and TTLS Check Use Client Certificate to verify the authenticity of a Client Certificate during the authentication process Clicking More will open the Client Certificate Selection Window shown in Figure 3 7 Users can select one suitable certificate as Client Certificate Default OFF Tunnel Authentication PEPA and TTLS use two step authentication method The first step is that Server sets up a Tunnel with its authentication No option is need to be set for Client the PC with the Adapter The second s
7. nodes for each other and can not detect each other This mechanism is a way to prevent data collision when Adapters require transmission Default OFF Fragment Threshold Fragmentation mechanism is used for improving the efficiency when high traffic flows along in the wireless network Default OFF 3 1 2 Authentication and Security Screen If an authentication or security setting is configured in your Access Point or router you must enable this function to ensure successful connection Use the following tab to configure data security and ID authentication see Figure 3 5 You may configure different settings in the profile including 802 11 Protocol Authentication and Security and 802 1X Protocol 10 Add Profile Conliualion Pudhenkcabon amd Secus Agranced Auathentcabon Open BOZ Hore Figure 3 5 Authentication and Security Authentication Before a station connects to a SSID the authentication type used by the SSID must be known Authentication types include OPEN SYSTEM WAP WAP PSK and SHARED Default WPA PSK Encryption To prevent unauthorized access to data transmitted on the network the Adapter and the Access Point agree on a type of data encryption Any station that wishes to connect must have the same password and encryption scheme to connect Different authentication types have different level of security Default TKIP WEP encryption Select one of the
8. some common problems which you may encounter while installing or using GIGABYTE Wireless Adapters Contact the GIGABYTE Wireless Technical Support Team at www giga byte com if you encounter problems not mentioned in this section Problem Cannot connect to an AP Advice e Make sure the SSID for the Wireless PCI Adapter is the same as the Access Point Make sure the security settings are the same as that of Access Point When WEP or WPA encryption is enabled check if the WEP or WPA keys for the PCI Adapter and AP are the same e Make sure if the MAC address of the Adapter is added in the AP Authorization Table Problem Can connect to an AP but cannot connect to the Internet Advice e Make sure the security settings are the same as that of Access Point When WEP or WPA encryption is enabled check if the WEP or WPA keys for the PCI Adapter and AP are the same e Make sure the network configuration IP address subnet mask gateway and DNS of your computer are correct Check the proxy server of the WEB browser is correctly set Problem Poor link quality and signal strength Advice Keep the Adapter away from microwave ovens and large metal objects to avoid radio interference Keepthe distance between the Adapter and the AP as close as possible Please check www giga byte com for more complete and up to date troubleshooting tips 20 Appendix Specifications Host Interface PCI Operating Voltages
9. 802 11 B Only Default 802 11 B G mix Ad Hoc Wireless Mode Sets Ad Hoc Wireless Protocols including 802 11 B G mix 802 11 B Only and 802 11 G Only Default 802 11 B G mix TX Burst The longest interval between frames is normally one DIFS while frames are transmitted When this setting is open the longest interval between frames is one SIFS that means the system is allowed to transmit higher capacity of data in one interval Default OFF B G Protection 802 11b uses CCK modulation 802 11g uses OFDM while CCK modulation for 802 11b is compatible To prevent data collision between two stations with 802 11b and 802 11g within range of the same Access Point it is necessary to set 11B G Protection This setting only functions when 802 11 B G mix is selected as Wireless Mode Three setting are available AUTO ENABLE and DISABLE This is a mechanism implemented to prevent the Hidden Node problem Hidden Node is a situation in which two stations are within range of the same Access Point but are not within range of each other Therefore they are hidden nodes for each other and can not detect each other This mechanism is a way to prevent data 15 collision when WLAN equipments require transmission TX Rate This option adjusts settings of TX Rate according to the setting of Infrastructure Wireless Mode Default Auto 3 2 Link Status Tab The Link Status tab displays the current association information about the Adapte
10. GIGABYTE T E C HM OL 54Mbs Wireless PCI Adapter GN WPKG User s Manual http www gigabyte com tw Version 3 0 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help FCC Caution To assure continued compliance any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device com
11. Requirements for Radio Equipment Countries of Operation and Conditions of Use in the European Community The user should run the configuration utility program provided with this product to check the current channel of operation and confirm that the device is operating in conformance with the spectrum usage rules for European Community countries as described in this section European standards dictate a maximum radiated transmit power of 100mW EIRP and a frequency range of 2 400 2 4835 Ghz Operation using 2 4 GHz Channels in France 2 4 GHz Bande les canaux 10 11 12 13 2457 2462 2467 et 2472 MHz respectivement sont compl tement libres d utilisation en France en utilisation int rieur Pour ce qui est des autres canaux ils peuvent tre soumis autorisation selon le d partment L utilisation en ext rieur est soumis autorisation pr alable et tr s restreint Vous pouvez contacter l Autorit de R gulation des T l communications http www art telecom fr pour de plus amples renseignements Please check ART s web site for latest requirements for use of the 2 4GHz band in France http www art telecom fr eng index htm When operating in France this device may be operated under the following conditions Indoors only using any channel in the 2 4465 2 4835 GHz band Trademarks GIGABYTE is a registered trademark of GIGA BYTE Technology Inc Other trademarks or registered trademarks are the property of their respective manufacturer
12. S from AP Frames Receive Successfully Number of frames received successfully Frames Receive With CRC Error Number of frames received with CRC Errors Frames Dropped Due TO Out of Resource Number of frames dropped due to out of resource Duplicate Frames Received Number of duplicate frames received Reset Counter Resets the counter to zero 18 3 5 About Tab The About tab displays information about current drivers and physical MAC address see Figure 3 13 GhConfig Configuration Utility x Profile Link Status Site Survey Statistics About c Coppight 2004 GIGAE TTE TECHNOLOGY CO LTD Ali nobis neceneed GbConig Version 21 2007 Dae 0917 2008 Dever Version 2260 Date 06 10 2004 Yason 1 2 IP 192 1691 3 QO 2OHE D CF ER EB Sub Wask 255 255 2550 Gateway TE TER 7 254 ENS EN INN ud Figure 3 13 About Tab GbConfig Version Date The version number and date of the Adapter Utility Driver Version Date The version number and date of the Adapter Driver EEPROM Version Hardware version number of the Adapters EEPROM IP Address The current IP Address of the Adapter Phy Address The MAC address of the Adapter Sub Mask The current Subnet Mask of the Adapter Default Gateway The current IP Address of the Gateway typically the IP address of the AP Appendix A Troubleshooting This troubleshooting guide provides answers to
13. device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution To assure continued compliance any changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE FCC Radiation Exposu
14. er CA server is reliable Default OFF Certificate issuer CA of a server certificate can be selected from certificate issuers on the drop down list Default ANY Allow intermediate Certificates When this option is checked the certificate issuer can be an issuer recognized by a specific certificate issuer On the other hand the server certificate must be issued by a certificate issuer selected by the user Server name This value can be a server name or the name of a domain where the server is located Server name must match exactly If this option is selected the server name of server certificate must be the same as Server Name or as the name of domain where the server is located Domain name must end in specified name If this option is selected the certificate issuer must be the domain or secondary domain entered in Server 14 3 1 3 Advanced Screen The Advanced screen includes fields of various parameters to review or change drivers Just click OK to apply any changes in parameters in the tab A reboot is not needed for changes to take effect see Figure 3 12 Edit Profile Configuiation Authentication and Advanced riche 211 Ef id hoc cde TxBURST Protection 3 12 Description of items in Figure 3 12 is as follows Wireless Mode Sets infrastructure Protocols including 802 11 B G mix and
15. four keys as the default encrypted key To setup WEP you will need to set a ASCII or HEX key to connect to Access Point The WEP Key can only be saved through the setting of profile 1 Select a Key 2 Select a form of the key Hex or ASCII 3 Enter password Please enter 26 hexadecimal digits or 13 ASCII digits 4 Click OK to save the settings Making HEX keys 64 bit Generated as 10 alphanumeric characters 0 9 a f example 843 29 562 128bit Generated as 26 alphanumeric characters 0 9 a f example 3c29f2536bef3276d32e364a2c Note Using a Hex key is more secure than using an ASCII key and if you are connecting to a GIGABYTE Router or Access Point ASCII keys are not allowed and you must use a 11 WPA PSK encryption WPA PSK Preshared Key uses TKIP or AES based your choice You create a password or Passphrase as its often called and the system will use the Passphrase to create a cipher code in which it will encrypt the data To use WPA PSK 1 Create a Passphrase and key it in Use 8 63 ASCII digits 2 Remember this Passphrase If you forget the Passphrase you will have to do a hard reset of the Access Point in order to restore default settings and connect again 3 Click OK to save these settings 3 1 2 1 802 1X Setting Certification Tab Clicking Use 802 1X Authentication and then Enter 802 1X configuration from the Authentication and Security Window will bring up the 802 1x
16. oard by pressing the card gently until the card edge connecter is completely and firmly inserted into your motherboards PCI slot lt Card edge connector Step 3 Once inserted attach the antenna on the mount of the Adapter by screwing it on clockwise as shown in the figure below M a Step 4 Power on your PC 2 2 Installing the Driver amp Utility After restarting your computer the Windows Found New Hardware wizard will open When it does please click Cancel to close it GIGABYTE drivers and utilities offer more power and control over your new WPKG PCI Adapter than does Windows native Zero Configuration Utility Step 1 Atthe Found New Hardware Wizard screen click Cancel Found hew Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install a dewce diver or a hance device To continue click aut Step 2 Insert the WPKG Setup CD into the CD ROM drive The WPKG Welcome screen window will automatically open Step 3 From the main menu click Install Wireless LAN Utility hue tu Step 4 InstallShield will install the WPKG drivers Click Next to proceed Welcome to install Gigabyte GN WPEG IB 119 WLan The hsa Eo eld ed Loren Gigebyis D 1199 sn compete To coelis dick head Step 6 Since your card is already inserted Click OK Information Step 7
17. our local distributor or authorized reseller immediately If you require returning the damaged product you must pack it in the original packing material or the warranty will be voided 1 4 LED Indicator The WPKG Adapter has two LED lights located on the outward facing bracket frame The left LED is the Activity LED and the right LED is the Link LED Description follows ACT OFF ON ON LINK OFF ON BLINK Meaning Network 1 Network card is Network card is not functioning connecting to sending receiving data network LED e Oe Condition of the Receiver ACT LINK 1 5 System Requirements For trouble free installation and operation please assure your PC meets the following minimum system requirements e Notebook or Desktop PC with a Pentium 300 MHz or higher compatible processor with an available PCI slot e A CD ROM drive e 20 Mbytes of free hard disk space Chapter2 Installation This chapter covers the installation of the WPKG Adapter for your desktop PC The following sections will assist you with proper installation of the PCI Adapter and also with installing the necessary drivers and utilities For specific information regarding your Version of Windows please refer to the appropriate sections as indicated 2 1 Installing the Adapter Hardware Installation Step 1 Power off your PC Step 2 Plug the PCI Adapter into an open PCI slot on the motherb
18. pecific Access Point into the profile 17 3 4 Statistics Tab The Statistics tab shows you the number of packets sent and received by the Adapter see Figure 3 11 GbhConfig Cenfiguratiam Lhtility Link Status Sie Survey Statistics About Transmit Statistics Fraene Succar silly 353 Tianandlad 360 Frame Teansmiled Aller Pains i Fad To Repara ACE Alter AB 4 ATS Frere ATS Freres To Aasaa CTS 0 Shstehice Frares Renewed Succesul 7 Frames wii CRC Eno zx Fiar Dirapped Crue To Duoi Aere 0 Fires 0 Donie Figure 3 11 Statistics Description of items in Figure 3 11 is as follows Frames Transmitted Successfully Number of frames transmitted successfully Frames Transmitted Successfully Without Retry Number of frames transmitted successfully excluding packets transmitted successfully with more than one retry Frames Transmitted Successfully After Retry s Number of frames transmitted successfully with more than one retry Frames Fail To Receive After Retries Number of frames failing to receive after many retries RTS Frames Successfully Receive CTS Number of RTS frames successfully received CTS Clear To Send from AP RTS Frames Fail To Receive CTS Number of RTS frames fail to receive CT
19. plies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Contents CHAPTER 1 PRODUCT 1 1 14 INTRODUCTION TO THE WPKG WIRELESS 1 Teo EA TURE S Erotic EE ule Srl Sr D OOV CE OE 1 1 3 PHYSICAL DIMENSIONS amp 1 E ash eaa abd eb en Ode 2 1 5 SYSTEM 2 CHAPTER 2 INSTALLING THE PCI ADAPTER 3 2 1 INSTALLING THE ADAPTER HARDWARE esses 3 2 2 INSTALLING THE DRIVER amp UTILITY WIN 98 ME 4 2 3 INSTALLING THE DRIVER amp UTILITY WINDOWS 2000 XP 0 0000000 CHAPTER USING THE UTILITY
20. profile see Figure 3 2 Profiles are useful if you often associate with different access points You can configure a group of settings depending on the access point you often associate with and save as a profile Click the Add button to create a new profile see section below for further details the Delete button to delete a selected profile the Edit button to modify a selected profile and click the Activate button to have a selected profile become active GbConfig Configuration Utility Prae Link Status Sale Suva Sialic Frois Li ETT Figure 3 2 Current profile Description of items in Figure 3 2 is as follows Profile Name A profile can be saved for various wireless settings in different environments i e home office and the corner coffee shop SSID Displays the SSID of the Adapter or Access Point Channel Shows the current wireless channel Authentication Sever authentication types They include OPEN WPA WPA PSK and Shared Encryption The type of encryption used in this profile None WEP AES and TKIP Network Type Informs you if an Access Point infrastructure or other access points 802 11 Ad Hoc are connected In 802 11 Ad Hoc you may select a channel for all members in 802 11 Ad Hoc 3 1 1 Configuration Screen You may ADD new profiles or EDIT existing ones see Figure 3 3 Add Profile Conkguiaiion Secuiy Advanced
21. re Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body The antenna s used for this transmitter must not be co located or operating in conjunction with any other antenna or transmitter Europe Declaration of Conformity This device is a 2 4 GHz low power RF device intended for home and office use in EU and EFTA member states In some EU EFTA member states some restrictions may apply Please contact local spectrum management authorities for further details before putting this device into operation GIGA BYTE Technology Inc declares that the product Wireless Broadband Router Model Number GN B49G is in conformity with and in accordance with the European Directive of EMC 89 336 EEC for the following sections EN 61000 3 2 EN 61000 3 3 EN 55024 and EN 55022 Disturbances and Immunities GIGA BYTE Technology Inc also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD Directive 73 23 EEC EN 60950 Safety In accordance with R amp TTE Directive 1995 5 EC Part 17 Requirements for Operation in the European Community GIGA BYTE Technology Inc declares the conformity of the above mentioned products for EN 300 328 2 V1 2 1 ETSI EN 300 328 1 V1 3 1 EN 301 489 1 and EN 301 489 17 Technical
22. rs connection with a wireless network see Figure 3 9 GabiLontig Configuration Utility Psoe Link Salus Sis Survey Statistics About Status GIGABYTE lt gt 0b2 EDACDET2 Channel Link Speed Te Mlb 48 0 5 Throughput Te kbps 00 145 1005 ouw Good 1002 dim sin Home 70 Figure 3 9 Link Status Description of items in Figure 3 9 is as follows Status Shows current link status No Link will appear on the screen when no connection is available Otherwise SSID and BSSID of a link will appear Channel The current channel number used by the Adapter Link Speed Transmission rate transferring and receiving at which data is transferred between Stations with Adapter and AP The speed will adjust according to different modes 802 11b 11g or mixed and distance Throughput displays the transmitting Tx and receiving Rx bytes per second Link Quality Measures quality of the link according to the quality of received AP signal Signal Strength Measures signal strength received by RF signal processor and displays the signal strength in dBm Noise Level Noise level during connection 3 3 Site Survey Tab The Site Survey tab shows you the list of reachable access points and or peer to peer Stations Just double click on the SSID that you want to connect or click the Connect button see Fig
23. s or owners Copyright Statement No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from GIGABYTE GIGA BYTE Technology Inc as stipulated by the United States Copyright Act of 1976 Contents are subject to change without prior notice Copyright 2004 by GIGA BYTE Technology Inc rights reserved 22 Appendix D Warranty Limited Warranty Statement 1 Year Warranty Thank you for purchasing the GIGABYTE Product This limited warranty statement will provide you one year warranty starting from the purchase date Of which if any defect is occurred due to accidents or any man made factors or any unauthorized torn off or damage to GIGABYTE s sticker on the product GIGABYTE Technology will not provide after sale services such as Products are damaged due to any violation of instructions on user manual Hardware is damaged due to inappropriate assembling Products are damaged due to the use of illegal accessory Products are damaged due to parts disassembling without authorization Products are damaged due to exceeding environment limits Products are damaged due to unexpected external force Products are damaged due to nature disasters Products are copies or illegally smuggled goods PLEASE RECORD THE FOLLOWING INFORMATION REGARDING YOUR WARRANTY Name of Customer
24. tep is to confirm the validity of Client with assigned authentication type in the Tunnel Data needed for authentication includes Tunnel ID Tunnel Password Client Certificate or Server Authentication Protocol Use assigned authentication type in the safe tunnel Tunnel ID Users accounts Password Passwords for users accounts mand I I inani 8 Ese 1 t Cone Figure 3 7 Client Certificate Selection List 3 1 2 2 802 1x Settings CA Server Tab CA Server is used when TLS TTLS or PEAP is in use When Use certificate chain is checked the Client can verify if such server is reliable and then transmit Client Certificate after the verification is confirmed CA WO se cerca cian Carica zum esa Trusted Cos Meals Jerem raura f Dera match acsi Donum rari ond im spared nama Figure 3 8 Server Setting To verify the CA server 1 Confirm if the Server Certificate is issued by assigned certificate issuer If Allow Intermediate Authentication is checked the server certificate can be issued by one intermediate certificate issuer 2 Check the server name of server certificate is the same as the name entered by the user or belongs to the same domain Use certificate chain If Use certificate chain is checked it indicates that Client will confirm wheth
25. tively expanding the range of your wireless network Secure With its support for the highest level of encryption common today 128 bit WEP 802 1X and WPA the WPKG is perfect for the home user keeping your data secure Robust Move huge files and digital video blazingly fast Up to 5 times faster than the common 11b solution The high gain antenna and 802 11g wireless standard gives you continuous access to your home wireless router or office network Convenient Saves the time and expense of installing Ethernet cabling when you want to set up or expand a network and makes it simple to relocate your desktop PC 1 2 Features Connects to any 802 11b and 802 11g wireless network Data rates up to 54 Mbps Switch between AP and Station mode using SoftAP Dynamic rate shifting ensures fastest possible connection External antenna Seamless roaming between wireless access points Supports AES Advance Encryption System enterprise class 802 1x security and multiple levels WEP encryption 64 bit 128 bit and WPA Wi Fi Protected Access 1 3 Physical Dimensions amp Packaging Dimensions 134mm x 81mm x 22mm Before beginning the installation procedures please inspect the components to assure that they have not been damaged during shipping The components include Package Contents e GN WPKG PCI Adapter e Low profile external antenna e Setup CD e Quick Start Guide In case of any missing or damaged accessories please contact y
26. ure 3 9 GhConfig Configuration Utility Profile Link Status Site Survey Statistics About 550 8550 Signal C Ener Auherk T j 0 Uniram inks Dore 57BA 4 1005 Mone Unkrewm DAE 045 57 86 ae Umbram 00 205 0 05 575 50 Hone Uniram Iniatruct DHO F FE DHE 374 11 Unkreem Inkshuct DIE DISS TU 11 Uniram n 11 0000 08 11 45 100 11 Mone Unknown Inikatruct Connected lt gt BIGAEYTE Connect Addiin Profile a Figure 3 10 Site Survey Description of items in Figure 3 10 is as follows SSID The name of the wireless network also known as Network Name BSSID Displays the MAC address of the Access Point or router Signal Strength Displays the strength of the signal from a station to the AP Channel Displays the current channel number used by the Access Point Encryption The security method used by the Access Point Authentication The authentication type used by the Access Point Network Type Informs you if an Access Point infrastructure or other stations 802 11 Ad Hoc is connected When it is 802 11 Ad Hoc we can select a channel for all members in 802 11 Ad Hoc Rescan Rescan the available networks and then re display results Connect Connects with the highlighted Access Point Add to Profile Adds a s
Download Pdf Manuals
Related Search